Electrical/Software (LabVIEW) Design Engineer, Wiltshire, UK

Job Title: Electrical/Software (LabVIEW) Design Engineer
Job Type: Permanent
Location: Malmesbury, Wiltshire, UK
Job Purpose:
To provide design solutions for machine control, instrumentation and data acquisition using National Instruments LabVIEW. Support and maintain systems throughout Dyson Ltd.
Principal Accountabilities:
Design of software using National Instruments LabVIEW for control and data acquisition
Support existing National Instruments LabVIEW systems
Design, manufacture and installation of safety and machine control circuits
Design bespoke signal conditioning PCBs
Write specifications and manage sub-contract design and manufacture resource
Skills Knowledge & Experience:
Essential:
HND in Electrical/Electronic engineering with 5 years experience
Attendance at National Instruments LabVIEW Intermediate 1&2 with 5 years programming experience
Desirable:
Working knowledge of National Instruments hardware product range
PCB design (Mentor Graphics)
Experience of PLC programming
Formal training in CE directives on Machinery, Low Voltage and EMC.
Knowledge of BS7671 Electrical Installations (IEEE 17th Regs)
Behavioural:
The ability to communicate appropriate, concise and accurate information across the business (technical and non-technical) is essential for the successful applicant.
You will be a highly driven individual who strives for accuracy & quality in work delivered.
You will be able to solve problems in a logical way, pre-empt future problems and seizing opportunities without waiting to be told.
The proven ability to work as part of a team or un-supervised to an agreed goal or set of deliverables is imperative.
For more detail visit our website: www.careers.dyson.com
Contact: [email protected]

I AM WORKING IN LABVIEW FROM 6+ MONTHS WIHT PXI.
I AM VERY ENTHUSIATIC TO WORK IN LABVIEW
i am from INDIA
MY EMAIL ID IS [email protected]

Similar Messages

Electrical Design Engineer with LabVIEW

Electrical Design Engineer with LabVIEW
q       Skilled with electronic circuit and electrical system design:
o         analog circuitry - detailed circuit analysis and design
o         microprocessors / microcontrollers
o         high performance data conversion circuits ( A/D and D/A converters )
o         digital circuitry - signal integrity, data communication, logic noise
o         power and support circuitry
o         signal conditioning and signal integrity (analog and digital)
o         RF and high-speed designs
o         full design implementation - concept to detailed circuit design to test / debug to production
q       Experience with RF and RF transceiver design.
q       Excellent documentation, specification, test planning, and test report writing skills a must. Must be able to develop and write detailed test requirements, test plans, technical specifications, design descriptions, and project reports.
q       LabVIEW™ and PC-based data acquisition experience. NI Certified Developer or ability to obtain this certification in reasonable period of time.
q       Data acquisition design experience.
q       Knowledge of PCB manufacturing.
Education / Training and Background :
BSEE / MSEE degree in Electrical Engineering
Attachments:
Invisar EE Design Engineer April 2006.pdf ‏50 KB
Invisar Project Engineer 5_2006.pdf ‏30 KB

I AM WORKING IN LABVIEW FROM 6+ MONTHS WIHT PXI.
I AM VERY ENTHUSIATIC TO WORK IN LABVIEW
i am from INDIA
MY EMAIL ID IS [email protected]

Software Design Engineer - UTC Power

Software design engineer for the design of software and control systems used in fuel cell stack and power plant test equipment.
Responsible for conceptual control logic, software design, software / hardware interfaces and controls hardware selection. Tasks include the planning, design, installation and documentation activities necessary to develop and maintain test equipment control software.
A thorough understanding of National Instrument's LabView software and its use in automatic or dynamic controls is required. This includes the use of LabView software to control electro-mechanical components, acquire, store and manage data using real time control systems. Experience with PLC programming is also desireable.
This position involves close interaction with numerous engineering disciplines and hourly functions. Ability to work in a team environment is a must. Applicant must be comfortable in a fast paced, dynamic work environment. Participation in FMEA's, HazOp's, EH&S reviews, failure investigations, and the training of hourly test operators will also be required.
Bachelors degree in Electrical or Computer Engineering
2 - 5 years experience in product development evaluation and testing.
Send resume to Mr. Joseph P. Haley
Manager, Software & Controls
UTC Power
195 Governor's Highway
South Windsor, CT 06074
[email protected]

I AM WORKING IN LABVIEW FROM 6+ MONTHS WIHT PXI.
I AM VERY ENTHUSIATIC TO WORK IN LABVIEW
i am from INDIA
MY EMAIL ID IS [email protected]

Research Design Engineer - LabVIEW/MATLAB Programmer -Boston, Massachusetts

Research Design Engineer - LabVIEW/MATLAB Programmer
The Eaton-Peabody Laboratory seeks an experienced programmer to design and write LabVIEW and MATLAB software to control stimulus generation, data acquisition and response analysis for a range of cutting-edge biomedical research projects. The successful candidate will join an existing team of hardware and software engineers within a multidisciplinary research laboratory, located at the Massachusetts Eye and Ear Infirmary, comprising 21 NIH-funded investigators studying a variety of aspects of hearing and deafness. To see current research projects here at the Eaton-Peabody Laboratory, go to our website: http://www.masseyeandear.org/research/ent/eaton-peabody/.
Minimum Qualifications:
BA/BS in Math, Computer Science or equivalent
demonstrated expertise in MATLAB, LabVIEW or C++
demonstrated ability to work and communicate effectively with technical and non-technical colleagues
Additional Qualifications:
experience with software control of digital and analog I/O boards
experience with scientific programming
Send a cover letter, resume, salary requirements and contact information for three references to:
[email protected]

Labview Programmer

2x LabVIEW Systems Engineer Full Time Positions – Sheffield and Bristol, UK

2x LabVIEW Systems Engineer - Full Time Positions – Sheffield and Bristol, UK
1.0      Description:
As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architecture primarily in the LabVIEW Programming Language and National Instruments Hardware Platforms. You will help customers from all kinds of industries on various issues, from getting started with LabVIEW software, to help with programming, debugging and onsite commissioning of complex systems including distributed embedded systems. There will also be items such as creating demos and working on proof of concepts. You must exhibit strong problem solving, communication and business acumen skills alongside a passion for technology. You will get the privilege of an insight into the engineering practices from a range of industries and be providing a consultancy on their system requirements.
2.0      Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦     Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦     Developing intuitive GUIs.
◦     Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦     Providing timely, accurate and effective solutions to technical problems.
◦     Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦     Reproducing and troubleshooting problems and incompatibilities in both software and hardware.
◦     Delivering professional and high quality, customer education courses.
◦     Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦     Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦     Working with the business development team to develop proof of concepts for customers.
◦     Travel 50% of the time.
3.0      Qualifications & Requirements:
◦     Minimum 2.1 honours degree in engineering or science related field, such as Electrical/electronic engineering, physics, mechatronics or computer science.
◦     Firm understanding and knowledge of National Instruments LabVIEW and TestStand, including LabVIEW FPGA and LabVIEW Embedded.
◦     Understanding of object oriented principles.
◦     Ability to pass CLA exam within the year.
◦     Knowledge and experience in instrumentation & control, and industrial automation is required.
◦     Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI, SCXI and cFP.
◦     Practical electrical debug experience.
◦     Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦     Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦     Must be able to handle multiple tasks and enjoy working with people.
◦     Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦     Excellent written, oral and presentation skills are key.
◦     Ability to deal effectively with customers to make them successful is essential.
◦     Ability to get along with others and function as a team player as well as work effectively alone.
◦     A proactive/can do attitude is vital and a happy view on life.
◦     Legal right to live and work in the UK. Sponsorship is not available.
◦     Must hold a full clean and valid UK driving license.
4.0      Location:
There are two positions for this role, one in Sheffield, South Yorkshire, UK and one in Bristol, UK
5.0      Reporting:
Systems Engineers will report to the Technical Director.
6.0      Salary:
Competitive salary based on level of experience.
7.0      Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Systems Engineer and the location for which you are applying in the email subject.

Hello,
I Aravindu.P completed M.Sc(Electronics & Instrumentation).I have one year experience working with Labview and embedded systems programming(Software and Hardware).I am very hardworking and sincerity.I want to working with industries like this.So please reply me.
Attachments:
Aravind_Resume (1).docx ‏18 KB

LabVIEW System Engineer: Albuquerque NM

PrimeCore Systems is looking for self motivated software engineers for developing LabVIEW automated test and data acquisition systems. Candidates must be able to manage and lead their own projects and communicate with customers. Strong software skills are a must with a solid knowledge of instrumentation and electronics.
Our engineers typically concurrently work on 2-6 projects on a variety of applications from simple data acquisition systems to large scale testing and control programs. There is ample opportunity to work in different fields and applications including solar energy, radar, machine vision, telemetry, wind, geothermal, robotics, power systems, nuclear, particle accelerator, calibration, and product testing.
Currently our primary need is for software development but there is opportunity for work with electrical and mechanical design, test system design, project management, and test engineering.
Compensation is hourly and typically allows for flexible schedules and work loads to help meet your lifestyle or compensation goals.
PrimeCore is a small company with minimal management staff so be prepared to be in charge of your own career path. We have been in business successfully serving our key customers for 10+ years.
Work is primarily on site at a DOE facility and candidates must be able to obtain a security clearance.
Bachelors in EE, ME, or Software engineering required.
5 years experience developing LabVIEW applications minimum.
$60-67 \ hr. DOE
Please Send Resumes and project lists to Keith Barrett: [email protected]

Did you try sending your resume/cv to the email address in the first post, as he requested? To expect him to continually check this thread is not reasonable, and to not follow his instructions does not make and prospective applicant appear capable of following directions. How much effort is there to sending the info as directed, the original post is pretty recent. And why do you have a link to another site?
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Software/Firmware Engineer - Santa Clara CA

Software / Firmware Engineer
OptiMedica is looking for an experienced Software /
Firmware Engineer to support the development and production of its
expanding line of innovative ophthalmic instruments. Candidate must be
experienced in low level hardware software/firmware design, fault
detection and recovery, state machine design and implementation, and
have the ability to work the electrical engineers to review designs to
ensure end to end product function.
Familiarity with Labview programming and Labview
FPGA, medical device environment and its regulations is a substantial
asset. Must be able to conceptualize, architect, and implement hardware
controllers that meet product needs, yet be seamlessly integrated with
manufacturing test stations for efficient production. Must be able to
work with limited guidance/supervision and be able to test, evaluate,
document, qualify and release designs for complex projects involving
medical laser equipment in a focused, highly collaborative
multidisciplinary environment.
Site Location/Contact
Information:
Santa
Clara, California
Note:
Candidates must be legally authorized to work in the United States.
NOTE: This job description is not intended to be
all-inclusive. Employee may perform
other related duties as negotiated to meet the ongoing needs of the
organization.
Contact:
Debbie Goedicke - 650-585-6784
[email protected]

I am interested in this one too.
Attachments:
resume.doc ‏30 KB

Test Design Engineer opening in New Hampshire

Hi all,
I have a 12 month + opening in New Hampshire for a Test Design Engineer. I'm looking for someone with TestStand and LabWindows experience, with LabView experience considered a plus. This position DOES require a clearance. If you are interested, please contact me at [email protected] Thanks!
Nick

Indumathi, you will not have success in your job search if you cannot read and understand the job posting. Sending your CV to every posting on the forum will not get you a job in this field if you don't pay attention to the details.
In this particular job post it is stated that you must have a US Government Security Clearance to even be considered, not be eligible for one, actually have one. Unless you are a U.S. Citizen it is Highly unlikely that you have one, and even if a U.S. citizen it is unlikely to have a security clearance.
If you want to be considered for a job, PAY Attention to the requirements, don't just send it to every link you see.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Experienced Labview Realtime Engineer wanted. Must be UK.

I am looking for an experienced Labview/ teststand engineer to develop software for our automated hydraulic test equipment. Please ask for job description. Must be able to work in UK.

I am going finish my M.Sc here in Sweden. I can work for you if you consider me as an option. I don't have any working visa in UK. I am basically from India.

Immediate need for LabVIEW Test Engineer in San Diego, CA

Greenlight Technical Consulting has an immediate for a LabVIEW Test Engineer to work on site at our client facility in San Diego, CA. For this position we are seeking people that have experience with LabVIEW 8.5 or 8.0. In this role you will be required to assist in the design and evaluation of new systems and the building of test fixtures. You will also be running tests with LabVIEW 8.5. On a limited basis you may be responsible for programming circuits and test fixtures.
The duration of this assignment is for at least 3 months.
Please email your resume to [email protected]
Laird B. Goolsby
Greenlight Technical Consulting, Inc.
225 Broadway Suite 302

Hi
I would like to know the working hour. Can it be flexible + weekend?
Thank you

I cannot install the component for QuickTime to convert videos done by a Sony video camera. My iMac tells me that software is designed for previous versions of Os x. Any ideas?

I cannot install the QuickTime component for MPEG-2 to read and covert video files created by Sony video cameras. My iMac tells me that the software is designed for previous versions of OS X.
Any ideas?

Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

Job Openings at Honeywell Automation India Ltd., Pune
Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
Position -Permanent
Job Location: Pune,India.
Job description is as follows:
For Senior Labview Test engineer Position: (4-6 years)
Primary Skills:
• Should be an expert in NI Labview.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
• Experience on hardware test automation using NI and third party hardware
• Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Knowledge of Project Development Life Cycle
• Experience in NI Teststand/ LabWindows
• Good Communication Skills
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLD (certified labview developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate to Pune
For Junior Labview Test engineer Position: (2-4 years)
Primary Skills:
• Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLAD (certified Labview associate developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate toPune,India
Please Forward your updated profile to [email protected]

Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

LabVIEW project engineer near Karlsruhe/Germany

Hello,
we are a company producing test- and measurement equipment for the automotive industry. We are looking for an experienced LabVIEW/Teststand engineer. Good knowledge of automotive interfaces (CAN, LIN, MOST), DAQ, Ni-Vision is a plus. German work permit and language is a must. A remote job is not possible. We welcome also freelancer.
If you are interested, please send us your application to the following eMail address: [email protected]
Thanks and best regards
Patrick Volz
Managing Director
MCF Technologie GmbH
Pforzheimer Str. 122
D-76275 Ettlingen
Germany
Phone: +49 7243 94756 0
www.mcf-technologie.de

Dear Sir/Madam,
My outgoing personality, my technical background, and my education make me a strong candidate for a position as Consultant (with a telecommuting preference) at Moore Good Ideas.
My experience at Mississippi State University has made me a versatile, theoretical and analytical problem solver. With detailed technical reporting and proceeding presentations, the Aerospace Engineering Department has adequately prepared me for the specified duties in the position announcement.
As you scheme through my resume, you will find that I have ample projects that pertain to this opening. You will discover the acquired computing and technical skills required to fulfill the assigned tasks. I can offer a high level of expertise in executing necessary simulations and detailed analysis.
I hope to serve as a model and contributor if given the opportunity to be a member of your team.
Sincerely,
N. Emmanuel Okoro
Attachments:
Resume of Emmanuel Okoro.doc ‏33 KB

Senior Software Management Configuration Engineer needed by an Int'l US Co

Our client is an international leader in the enterprise software space. They are the leading provider of software used to develop, deploy and integrate enterprise software applications.
As business is booming they are looking for a Senior Software Management Configuration Engineer to be based in Singapore.
Position:     Senior Software Management Configuration Engineer
Client:      -
Location:      Singapore
Coverage:      APAC
Travel:      0 % (Except for training to be provided in the US)
Position Brief:
The Senior SCM Engineer will play a vital role in aiding the success of the development process and support of product source code in the R & D lab in Asia.
The candidate is a team player who will coordinate build activities with other SCMs in the US R&D Labs, and work with a variety of people belonging to different teams such as Development, QA and IT. With his ability to script efficiently so as to automate the builds and associated acceptance tests, the candidate will build a strong and robust daily build and test environment and manage the running of the build system effectively.
We are looking for a self motivated and responsible candidate who has the initiative to fix all build issues and solve problems with quick turnaround. This candidate must be keen and flexible with operational style to meet the requirements and culture in each country.
Prerequisites (No Exceptions):
�     Minimum 4 years experience in Software Configuration Management and Build Management.
�     Strong experience and knowledge in Clearcase or Starteam /UCM administration
�     Extremely comfortable with Korn Shell scripting on a UNIX platform
�     Experience with software development cycle in multi-site environments
�     Excellent communication skills , both oral and written
�     BS/ BA degree in Computer Science or related subject or equivalent
Nice to Have:
�     Strong preference for the person to be already based in Singapore; however our client will consider relocating a person from another country.
�     Mandarin will be a plus
Referral Fee:
There will be a SGD $500 finder's fee if you recommend a person that we do not know of is placed for this role.
Interested candidates, please send your resume to [email protected]

-

Comment je peux récupérer une chaine de caratères d'un fichier(txt par expl) dans une ligne (spécifiée) et une colonne (aussi spécifiée) avec notre adorable software LABVIEW

Salut à tous,
Comment je peux récupérer une chaine de caratères d'un fichier(txt par expl) dans une ligne (spécifiée) et une colonne (aussi spécifiée) avec notre adorable software LABVIEW.
Thx
Nizar
Résolu !
Accéder à la solution.

Si ton fichier est un fichier tableur ce qu'a dit yohann me parait le mieux. Par contre si c'est un fichier texte qui contient une chaine au format tableur (sepération avec des tabulations) il faut utiliser "lire un fichier texte" + "Convertir un chaine au format tableur en tableau" et ensuite indexer la case qui t'intéresse.
Maintenant si tu as un simple fichier texte et que tu veux lire un couple ligne/colonne qui désigne un caractère précis il faut utiliser "définir la position dans le fichier" en connaissant la largeur de ton fichier texte. et la tu n'as plus qu'à rentrer dans offset: indice_ligne*largeur+indice_colonne comme une vieille réminiscence du c.
Sebastien DEVISSCHER - Nerys

Electrical​/Software (LabVIEW) Design Engineer, Wiltshire, UK

Similar Messages

Maybe you are looking for

Electrical/Software (LabVIEW) Design Engineer, Wiltshire, UK