Electronic Bank statement error

Hi gurus,
I have configured electronic bank statement settings for multicash format when ever i execute the file in ff.5 it is showing the error message and accounting entries will not get generated please help me on this
Error message.
Account 560036003      45605043982                   INR: Statement
200800466 is not in the bank data storage
     Message no. FB770
Diagnosis
     The previous account statment has not been imported.
System response
     The system permits the import regardless.
Procedure
     You can deactivate the message for the formats Multicash and MT940:
Effects on Customizing
     You can define when this system message is to be issued in accordance with your requirements.
You do this in Customizing as follows: Controlling -> Controlling:
General -> Change Message Control.
The application area and message number can be taken from the technical
documentation.
Its very urgent please help me
Regards,
Yashwanth

Thanks for reply
Again iam getting one more error
Account statement was not updated
Message no. FB773
While importing electronic bank statement, the system determ
that not all external transactions (business transaction cod
text keys, or posting texts) were in
table T028G.
Enter the transactions in table T028G.
Afterwards, start the processing again.
Following entries missing in table T028G:
These two error messages I am getting please help on this
Regards,
Yashwanth

Similar Messages

Electronic bank statement importing error

Dear Guru,
We've just upgraded support package upto last version and then happened to see errors while importing account statements in SWIFT MT940 format.
Message says,
"House bank table: No entry with bank key and acct 40443751657275"
Procedure
Maintain the house bank tables.
Actually, there are bank key, account number in SAP.
This error message is somewhat misleading.
Is there any special programe to generate "Electronic bank statement"?
Thanks for advice in advance.
J.

Look like there is a solution if we put bank account number in alternative bank account number also.
Take a look at this thread.
MT940 :No entry with bank key and acct

Error in uploading MT940 format - Electronic bank statement

Hi
I am configuring the electronic bank statement.Here I am able to do so using the Swift MT940 international format. Bank Statement is imported and postings made to bank account.
One bank will provide the data in MT940 format. I tried using the MT940 file directly, however I get the message - Account statement not updated.
Please help to reslove the error
Regards,
Mahendra

Hi,
As Nikhil said, we have two different files in MT940 (structured and unstructured). Select correct one while processing.
And also check if you maintain external transactions and posting rules for them in the configuration.
Thanks.

Error in Electronic bank statement

Hi Guys,
am trying to do Electronic bank statement, statement is generating but automatic clearing with GL (Main Bank and Bank clearing account) is not happening.
T.code: FEBAN
error shown under this transaction... i did not get any error log...how do i rectify this error...
but under this t.code, i can able to post the line item by manual entry but its not happening automatically
could anybody tell me how to rectify this error
Thanks in advance
Regards
Elan

HI Elan,
If the documents are not posted through Bank Statement processing then the same document items is shown in the text of "Elec. Posting Incomplete" . After you double clicking the same then you get the list of documents which shown the status of Entered instead of Posted. that means the documents are not posted into the system.
For posting those incomplete documents you may reprocess the bank statement through the t.code FEBAN.
You have to enter the details of the Co.code, House Bank, Acct ID, Stmt No and stmt date etc and then press execute button to get the entered statement to do the reprocess.
Select one of the red colour openitem , goto the select items in the menubar and then click on post.. If you have multiple items which are in red colour then also you have to post all the line items by selecting each and every item. There is no option option to post all at the same time.
Hope it will rectifies your problem..
Thanks

Electronic bank statement processing failed with error

Hi All,
While processing the electronic bank statement incoming file, it created an error like
'Total of Line Items in line item file not the same as in statement file"
how do I check if the control totals matches..?
rgds,

You should give the exact message, with message number.
If it is FB 777, "DTAUS: Number of line items not equal to control total; see long text", you should see the long text. I think it contains sufficient information:
Text
DTAUS: Number of line items not equal to control total; see long text
Diagnosis
data records of record type 'C' were handed over in the file you
    imported. There must be data records according to the control total
    from the fourth field of record type 'E'.
Processing was therefore terminated.
The DTAUS file was not imported into the bank data clipboard. No
    postings were generated.
Procedure
Inform your credit institution about the error which has occurred and
    let them give you a correct DTAUS file.
No actions are necessary in the SAP System.

Error in Upload of Electronic Bank Statement

Hi All,
We are trying to upload an electronic bank statement and while it was running, I was disconnected from the system. When I checked, only a few of the entries from the upload file got uploaded successfully and I can not continue the pending job. I would just like to know if I can reupload the file without duplicating the entries that have been uploaded successfully? If not, what options do I have so that I can upload the remaining entries? Please advice. Thank you!

Hi,
You can look at the option of deleting the existing bank statement by using the program RFEBKA96 and uploading the statement once again. You can copy the required parameters for this program from FEBA.
Regards,
Kiron Kumar T.

Bank Statement Error

I am having a peculiar error in bank statement processing (Manual).
I had to block a Cheq clearing GL account for some reasons and I created a new clearing GL account. I assigned this GL number in the FI12 (bank account directory) by deleting the old GL number and also the house bank updated in the new GL account number. I posted the open item in this clearing account also. However, while processing the Bank Statement, system is picking the same old clearing GL account number and says there is no open item available. It is not picking the new clearing GL account.
Why this is happening ? All the bank statement processing settings were reviewed and changes made. I am using the masking setting for GL account search. That is also done fine.

Hi,
Please check this also
Electronic Bank Reconciliation
The primary configuration steps necessary to set up Electronic Bank Statements (EBS) Processing in SAP.
1. Create House Bank and Account ID (FI12)
2. Setup EDI Partner Profile for FINSTA Message Type (WE20)
3. Configure Global Settings for EBS (IMG)
Create Account Symbols
Assign Accounts to Account Symbols
Create Keys for Posting Rules
Define Posting Rules
Create Transaction Types
Assign External Transaction Types to Posting Rules
Assign Bank Accounts to Transaction Types
Also check out this very useful link which shows how to configure in detail
[http://www.sap-topjobs.com/sapFI/bankreco4/index.htm]
Thanks

Configuration / Uploading of Electronic Bank Statement Steps

Hi
I have confirgured the electronic bank statement functinality, I have used interpetaton alogrithm as 015, In Assign External Transaction type to posting rule, we have only two exteranal transaction 1001 for Credit and 1002 for debits in bank, we have assigned posting rule Z1 to external transction 1001 and Z2 to 1002.
I have received the following bank statement in multicash format.
Line Items File UMSATZ.TXT
Bank
Account
Statement Number
Value Date
Blank column
Text
Blank1 column
Blank2 column
External transaction code
Reference
Amount
Curr
Blank3 column
Statement Date
Header File AUSZUG.TXT
Bank
Account
Statement Number
Date
Curr
Opening Balance
Credit
Debits
Closing
Kindly advise the step to upload the above files and how the system will identify the reference column and external transaction from the statement to post based on above configuration.
Basically I want to ask that we are aware that bank statement have this column, but how SAP will identify the same and post.
Awaiting for early reply.
Best Regards
Mukesh Mokashi

Hi Srikanth
I have executed the test program, the system has posted three documents document pertaining to GL accounts as mentioned below:
1. G/L acct postings
Cash disbursement
00011 FB01 SA        001 40 215019      INR       30,000.00-
                                   002 50 215002      INR       30,000.00
         Document 25000037 was posted in company code 1000
Outgoing checks
00012 FB01 SA        001 40 215019      INR       31,000.00-
                                   002 50 215001      INR       31,000.00
         Document 25000038 was posted in company code 1000
Outgoing checks
00013 FB01 SA        001 40 215019      INR       32,000.00-
                                   002 50 215001      INR       32,000.00
         Document 25000039 was posted in company code 1000
Files created
LI file
          C:\Documents and Settings\10000058\Desktop\UMSATZ1.TXT
          Lines:                3
Stmt file
          C:\Documents and Settings\10000058\Desktop\AUSZUG1.TXT
          Lines:                1
2. For Customer Open Item it has show error as "(GLT2 001) Item category 04000 not allowed in accounting transaction 0200 /0001"
Point No.1
I am confused what system has performed and how the GL codes are picked for posintg for point no.1, further the message
shows files are generated, the file contents are blank.
Point No.2
Error for customer open item creation
Can you please explain the above points.
Best Regards
Mukesh Mokashi

Electronic bank statement and new General ledger

Hi all,
we want to implement electronic bank statement and new G/L is active. While uploading the file, we receive an error: No Profit Center could be found. For us it is clear, because in the uplaod file there is no Profit Center. But how can we solve this problem? Can we activate like a user exit with a " dummy PC" for EBS? if yes, where and how? Or is there any SAP solution already provided? We assume this problem is a general problem for all SAP system with new G/L activation.
Thanks in advance.
Heidi

I found the answer in Customizing new G/L. thanks anyway.
Heiidi

Electronic bank statement in Foreign Currency

Hi,
We have set up the system so as to create a payment order when automatic payment program is run. Now, we have a scenario, where house bank is in local currency - SEK. This is used to pay the invoices in foreign currencies USD, DKK etc using automatic payment program. The electronic bank statement we receive from the bank has transactions in different currencies. We convert this to multicash format using DME engine, mapping the amounts in local currency to the statement and item file.
When try to clear the invocies by importing this multicash statement, following error message is generated.
Message no. F5794 i.e. XXX is not a payment order for currency XXX. Correction required.
Any ponters to solve the issue.
Appreciate the help in this regard!
Thanks
/Vartika

Hi Narasimhulu,
Thanks for your reply.
The thing is, payment orders are in a foreign currencies - USD , EUR etc. The clearing account is in local currency SEK. The bank statement has amounts both in order currency as well as local currency for every order. But when we are clearing using multicash, we are trying to pass the amounts in local currencies for each order. This is because, as far as i understand, it is the currency in multicash statement file that is used for clearing . And there can be only one record in multicash statement file. So we have to use the local currency for clearing.
EBS:
1 Payment order 1 - 1000 USD = 7000 SEK
2 Payment order 2 -2000 EUR = 18000 SEK
Multicah Statement File :
25000 SEK
Multicash Item File :
Payment order 1 - 7000 SEK
Payment order 2 - 18000 SEK
Or is there any other way of handling it ?
Many thanks again!
Regards,
Vartika

Format file problem uploading electronic bank statement files FF_5 RFEBKA00

hello
I am facing a problem when uploading electronic bank statement files with the file format. The situation is as follows:
1- Electronic bank statement files are sent by FTP from the bank to a certain directory in AL11
2- we have developed a "z" program that just picks electronic bank statement files from AL11 directory and process them using standard FF_5 (RFEBKA00) program.
3- When processing some files had an error, when debugging we have verified that errors are caused by some "special" characters non Unicode as "®" (=Hex'AE') with UTF-8, a '#' is displayed.
SAP answers a question as follows:
AL11 is designed to display os-files (log-files, trace-files etc.)
from within the SAP-system for supporting purposes in order not to
logon to the os itself.
It was not designed to display any file-content in the system created
with any code-page.
AL11 opens the file in textmode with encoding option default, which
means UTF-8 in a unicode system and NON-UNICODE in the other case.
You cannot change this setting.
If you have the need to specify these options, depending on your files,
you can make a copy of report RSWATCH0 and customize the OPEN-statement
to yor needs.
On a Unicode system, the files need to be in Unicode format (UTF-8).
Eg:When you interpret a non-Unicode "®" (=Hex'AE') with UTF-8, a '#' is
displayed.
Case 1:
Who is creating those files? Are these files
1) created by you
2) are they written by a SAP application?
==>There are the notes 752835 and 747615 for cases like these.
In case 2) it may be that the application responsible for the file
download (not AL11!) should be the problem, considering note 752835.
There is also the possibility for you to convert the file to the correct format using our tool RSCP_CONVERT_FILE (note 747615).
System administrator has told me to copy standard RFEBKA00 program and modify the OPEN-statement but I am not agree because I think that the problem is when generating the files in bank's system and/or sending the files to SAP by FTP.
Does any body face a problem like this before? Any ideas?
Thanks a lot

Hello,
The files that are available in AL11 are in Unicode.
Can you convert them to text by using the following method and then try:
You must have mapped this directory and having access.
Right click on file
Open with: Microsoft Office Word
Then the pop-up comes: File conversion - bacs
Select Other encoding radio button
Then select "Unicode" from list
and say OK
Now the file is being opened in readable format:
File SAVE as PLAIN TEXT
Save the file in the same folder that you are referring to in AL11
Now if you try with this .txt file, it should work in FF_5
Thanks,
Ravi

FEBA - electronic bank statement - change posting rule

Hi Experts,
When processing the electronic bank statement in FEBA, there was an error in one of the lines. The status of the line is ' To be posted'.
I need to change the posting rule (internal transaction) but i hit this error - Item would not be posted in new transaction; transaction not changed. Message no. FV 715
Any idea how I can proceed?
Please help. Thanks!
-Charlene-

Hi,
I guess the bank statement is loaded in the system. If yes then , in addition to the above suggestions, delete bank statement, configure new rule and again run the bank reco. This is because once bank statement is loaded you cannot change posting rule in FEBAN. And also the bank statement number gets updated in SAP.
Regards
Milind Sonalkar

Electronic Bank Statement - Assign External Transaction Types to Posting Rules

Hello,
I am trying to assign external transactions (BAI codes) to posting rules in global settings of electronic bank statement.
Here is my scenario -
If it is a credit transaction then I assign BAI code 167 to a posting rule (ex. Z555) that is assigned to GL account lets say 1234. Now I want to assign a credit transaction 167 from a different customer to a different posting rule (ex. Z666) so it posts to different account lets say 9991. SAP won't let me do this. It gives me an error that entry already exists. It won't let me assign two posting rules to the same external transaction code. Is there a way to address this scenario?
Please advise.
Thanks,
Priya

Hi Priya
If you have something different to distinguish between the two transactions, you can use the search string configuration. Generally, such kind of information is available in Notes to Payee information in your bank file. The below link will help you in how the search strings are configured in SAP
EBS: configuration of search string, part 1
If the search string does not work for you, you may also at implementing the enhancement FEB00001. You can check out the relevant exits in this enhancement in t code SMOD.
Thanks & Regards
Sanil Bhandari

Electronic Bank Statement - Reg

Hi All,
I have configured the Electronic Bank Statement for multicash format. The entries are flown correctly from clearing Account to Main Account once you import the multicash format. We are working SAP R/3 4.7 In this format in Note to payee 1 column bankers captured the cheque number and in note to payee 11 column they captured deposit slip Number.
When we post the receipt entry we capture the cheque number in assignment column and deposit slip in the reference 3 column.
After that entry when we import multicash format and subsequent posting to main account system should check the note payee 1 with (Assignment) and note to payee 11 with reference 3 if both are matching the entry should post from clearing account to main account. If any thing is not matching the entry should not pass and system should show that item in error.
Then user has to run the manual process I have tried with interpretation algorithm also but system not even checks single item. Systems are not throwing any error item.
Regards
Venkat

I tried with both
:61:0805160516DD114,00NCHK100025//100025
:61:0805160516DD114,00NCHK100025 1//100025 1

Electronic Bank Statement (FF_5)

Hi All,
Using transaction FF_5 (Bank Statement), Electronic bank statement format used is SWIFT MT940.
The file gets loaded, but the document does not get posted. when checked in FEBA, it gives 'To Be posted'.
No specific error is found. I have checked the setup, but no problem found in setup. then doucument has to be posted manually.
please can help that after file is getting loaded, why documents are not getting posted.
Thank You.
Regards
Reena

HI All,
I checked in FEBA and found that two documents are posted and for others it is giving to be posted, i checked all the options of FEBA, but error as such is not mentioned.
Thank You,
Regards
Reena

Electronic Bank statement error

Similar Messages

Maybe you are looking for