Electronic Signature/Validate Local Userid and Password

Hi
I have a requirement that during processing of an application a user should be prompted to enter userid/password to perform an "electronic signature". I need to validate this userid/password against the local passwords on the laptop. Does anyone know if there are API's that could be used to perform this validation?
Thank you
John

Refer this thread -
Make excel sheet password protected through ABAP codeu0085
Regards,
Amit

Similar Messages

API - BAPI , RFC Function module to validate user id and password

Hi,
Can anyone provide me with the function module to validate the username and password of the user of the back end R/3 System.
Best Regards
Sid

Use function module SUSR_CHECK_LOGON_DATA. You need to provide auth_method (P for password check), userid and password.
Be careful when you execute the function in test mode because it converts the input into upper case hence if you have lower case characters in your password it will return with invalid password. If you pass the lower case into the function in a program everything is fine.
Regards,
Michael

How to Store UserID and Password on Server

Hi,
I m using Applet-Servlet Communication. When my applet calls Servlet it makes database connection and retruns Object to Applet. Can ne body pls. tell me instead of hardcoding database userid and password in servlet, what is a most convinient way to a pass these parameters to servlet. Properties files are one of the way, but is it secure and suaitable on the Web? Is there ne other funda for this?
Thanx in advance
Sandeep

No, I don't think the use of properties file is a suitable
approach.
You can use JDBC-realm .Accept the username & password from user,pass these values to the servlet and then validate this against the names stored in the database.

SSO Configuration not working - Still asking for Userid and password

Hi Guys,
I have configured Portal to use with backend server. Configured WAS & ITS and created System Alias.
For Testing SSO I did following steps on portal:
System Administration > Support > SAP Appliction > SAP Transaction
Selected system Alias and tcode se12. Selected SAPGUI for HTML. Pressed Go.
Instead of SE12 screen, I get Logon Screen asking for USERID and password.
I should be getting SE12 screen directly without entering USERID and PASSWORD.
I tested with Transaction iView (SE12) and getting the same logon screen. After entering userid/password it displays SAP Easy Access menu instead of displaying SE12
Please help.
Thanks a lot.
mini

Hi Sandeep.
Thanks for your reply. Here are the answers to your questions:
1. Is the username same in the portal and the backend that you are trying to connect, ensure that there is the same username that exists in the system you want to connect to. YES
2. The ticket is imported properly- check the ACL and Certificate list in Tcode STRUSTSSO2.
Ticket is valid from 01 Jan 2009 to 14 Mar 2012.
3. Check for the parameters in place login_accept_ticket = 1 and login_create_ticket = 2 and icm_hostname_full is set to FQDN.
In RZ10 it has 3 parameters:
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 2
icm/host_name_full = sapecc6.tri.com
4. What is the result when you test the system connection?
WAS & ITS Connections are successful.
Connection test for Connectors is giving following results:
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
My Connectors Details:
Application Host : sapecc6
Gateway Host : sapecc6.tri.com
Gateway Host : 3301
SAP Client : 800
SAP Client : EC7
SAP System Number : 01
Server Port: 3201
System Type: SAP_R3
I am using same userid for Portal and backend.
5. Are the 2 systems that you want to configure SSO in the same domain?
I am trying to connect R3 to Portal.
Please give me directions to fix the problem.

BSP - UserId and Password for Internal Users - Anonymous for other users

Hello,
We developed an application via BSP's. This application can be accessed by two kind of users.
1. External Users, with should access the page without using a userId and password.
2. Internal Users, they will have more authorisation and need to specify their userId and Password.
How can we accomplish this? I tried internal aliases, but can't get it to work properly.
In the first service 'zbsp' I didn't specify a userId and password in sicf.
Then I created an internal alias 'zbsp' referring to this 'zbsp'. In this alias I specified a userId and Password, but the system still asks for a userId and Password. (and after logging in the system gives the following error: The application name in URL .../bc/bsp/sap/zbsp2/uat_report.htm is invalid.)
What did I do wrong? Or are there other ways to accomplish this?
Greetings,
Bart

Take a look at the following mesaages that discussed the whole SSO and SSO2 ticket logins.
As for a way to handle the two different login types. Well first and formost - active the SSO Tickets on your system. Set your BSP up for that.
Then create a new starting page with an alias to the pöublic section for BSP's in your system. On this page make two links.
For your external users - one that redirects to your BSP passing the user and password in the url for the "read only external user" - that's the sap-user=name here&sap-password=passwordhere.
For your internal people give them simply the link to the BSP which when they click it will see no user name and password and redirect them to the BSP login.
Make sure you setup the BSP login according to SAP note 517860 and follow the instructions from http://help.sap.com/saphelp_nw04/helpdata/en/1d/13c73cee4fb55be10000000a114084/frameset.htm using the supplied SYSTEM_PUBLIC)
It's a bit basic but it works, we do it
Oh and setting up the system for the SSO (transaction sso2) is very very simple!!

Hi, how to develop application , matching of userid and password to backend

hi masters ,
              , user have to give userid and password of back end sap system to see particular report. i mean there is a first view ( this first view muust not be first screen of portal ) with userid and password fields . after gave his id and password he can go to second view to see the particualr details .please suggest me about how to do custom bapi code and , in also webdynpro java how to develop .
           i know about sso. in this concept i have to use through webdynpro java only. no need of sso concept here .
          after giving the userid and password , those details must be match with backend sap database.if no one of userid and passwrod field is matching it has to show some error message. and in password field must be in encrypted letters .

hi surya,
Use JCO api to create connection to the backend.
[JCO tutorial|http://www.apentia-forum.de/viewtopic.php?t=1962&sid=9ac1506bdb153c14edaf891300bfde25]
On the webdynpro screen you can ask users to enter login id and password. Use this information to create connection to backend using JCO.
Hope this helps!
Monalisa

How to authenticate userid and password of b2b user in a b2c portal

I am having a reqirement in B2C web portal , where in i have to create two input text fields which will accept userid and password ( the userid and password will be of b2b users)and button to logon and if i click on the logon button, it should take into b2b web portal. Is it possible? if possible please help me in this issue.
Please get back to me if i am not clear in my requirement.
Thanks a lot in advance!
lakshman reddy G.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Oct 6, 2008 6:07 PM

To get an idea check these links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/aaa1a890-0201-0010-eb93-ae3d2bb74a78
BSP/HowTo - Customizing the design of System Logon page in NetWeaver '04
-Aman

Web report without userid and password

Hi Experts,
I exported a BW web report to excel spreadsheet and sent it through mail to others, When recepients tried to open that exported spreadsheet, It is prompting for userid and password. I dont want this to be happened and it should open without asking userid / passsword? Can any one suggest some clues onthis.

Check to see if they are looking at the data or running the report. If they are running the report, then they will be prompted for the user id and password.
You can run the report for them and download the data only, then they will not get the prompts, however they will not be able to update the data or drill down.
Alternatively, you can use the Broadcaster to send out the updated reports directly to them.
Brian

Can I use a stored procedure to validate a username and password?

We are using Discoverer on a standalone server but we have a database link to our reporting database.
Our standalone Discoverer is on a 10g database with a database link. Our reporting database is an 9i database using oracle applications. I have a stored procedure that i can call to validate username and password in the apps.
Is there anyway to call that stored procedure from Discoverer so that my users don't have to have 2 different passwords?
thanks
Angie

Michael.
Let's rewind this discussion for a sec as I have not the faintest idea what you're referring to with the dblinks, query prediction, etc.
I didn't think that was the main thrust of the thread and thought it was if the user could validate a username and password. If they happen to use a dblink, that's another issue.
1. What I"m referring to as good design is the concept of the eul$ triggers that Discoverer offers (the link offered by the user before my response).
I like triggers in Forms, I like trigger in Reports - and I like them in Discoverer. I think they potentially have a great use - the problem is finding that use.
One use I can forsee is setting up an environment or table everytime one enters Discoverer. Or maybe some cleanup after Discoverer is exited (ie: delete that setup table).
2. You mentioned dblinks.
What do I think about 'em? Don't know ... don't care. Haven't had to work with them too much and until that point comes - I'm not worried about them either way.
3. You mention query prediction.
What do I think about it? IMO, turn the darn thing off. I don't really care what it's SUPPOSED to do according to Oracle - in 9 out of 10 client sites I go to ... it's not doing it. It's waste time, processing power, coffee time, whatever ... to come up with a bogus estimate that makes Discoverer looking like a toy.
For example:
prediction time: it takes 6 minutes to come up with an estimate
prediction: Query will take 364 days, 11 hours, 9 minutes, 18 seconds. Do you wish to continue?
me: Duh ... okay.
query runs for: 1 minute, 2 seconds
It's like a Vulcan in that it's incredible detailed on it's assessment on how long it will take. Unlike a Vulcan though, it's completely bogus. Sure it supposed to be better over time but again - in 9 out of 10 client sites I go to, it's a joke and once turned off ... the client couldn't be happier.
So again, let's rewind here. Maybe I'm missing something, but I had no idea this thread was angling to dblink and query prediction, but my views on what I thought we were talking about are above.
Russ
PS. And no I'm not PO'd ... just want to fix what appears to be cross-purposes.

How to encrypt UserID and Password in HTTP url

Hello experts,
We want to encrypt UserID and Password which has used in http URL in SAP PI 7.1.
As we have used SOAP adapter with Transport Protocol HTTP for sender server.
Kindly help us on it.
Regards,
Poonam.

Hi,
please go through below blog,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04408cc-f10e-2c10-b5b7-af11026b2393?QuickLink=index&overridelayout=true
please go through below threads,
SOAP Envelope with user id password
Soap ---to ----file scenario
regards,
ganesh.

How to use the userid and password infor from Oracle DB in BO

Out client has the userid and passwords(encrypted) infomration stored in oracle table.
Is it possible to import this useid and password information into BO .And use the same userid and password from Oracle table for its login authentication and for data security...?
In other words can the userid/pwd info from Oracle Profile Table imported and re-used in BO Enterprise Edition.

If the users/pw are in an Oracle LDAP v3 compliant server then you can import them via LDAP plugin, else you would need to bring them in an enterprise users via script. The Import wizard can do this and the SDK (see the SDK forums for more info on how)
Maintaining the passwords would be difficult unless you are using and industry standard directory like LDAP.
Regards,
Tim

How do pass the UserID and Password in the SOAP header for web services

I am encountering issues trying to pass the userid and password in the SOAP header when consuming a 3rd party web service. Rostewitz posted something similiar but I don't know how to type iv_xml. Any help would be greatly appreciated.
Thank you,
jpina

It helps to post a link to a thread when you refer to it. If you are trying to implement that solution though, you can look at the parameter of the corresponding method being called. The parameter has type 'SIMPLE' which means that it is compatible with all of the predefined elementary ABAP types. In this case, you should use 'STRING'.

Where to set UserID and Password for NFS file share in Central File Adapter

Hi All,
Does anyone know if/where it is possible to set the userID and password if you want to connect to an NFS fileshare with the central XI30 file adapter?
Cheers,
Frank

Hi Frank,
The file adapter uses user ID SAPSERVICE... with the addition of the system ID of your SAP XI system. So if your system ID is EXD the user id which needs read/write access should be SAPSERVICEEXD.
Have fun

How to validate user name and password in webdynpro.

Dear All,
Actually i have created login name and password in view, webdynpro and want to validate the user name and password but i am not finding proper code to how to validate user name and password.
Pl do the needful help.
Regards.
Tazeer.
Moderator Message: There is a seperate forum for WebDynpro. Please ask your question there.
Edited by: kishan P on Oct 5, 2010 1:08 PM

Hello, I don´t get you question. User authentication is ready out of the box in webdypro...
Regards Otto

How to Hide userid and password in the address bar

Hello Dears
I am using OAS 10g and calling a form from my web portal designed in ASP.Net. I pass userid and password to OAS as parameters and form is accessed but the problem is that userid and password are displayed in the address bar. How can I hide this info to secure my application.
Note: This is a multi-user environment.
Please guide. thanks
Inayat Qazi

On your reports server in the reports\conf directory there is a file called cgicmd.dat
This file allows you to create a key that will be replaced with the entry from this file. You can put your userid and password parameters in here and thus remove them from the address line.
Key value entries look like this in the file:
examplekey: userid="scott/tiger@myoracleinstance" %*
your url would then look like this:
http://myreportsserver/servlet/rwservlet?examplekey&report=myreport.rdf&destype=cache

Electronic Signature/Validate Local Userid and Password

Similar Messages

Maybe you are looking for