Elem 4.0 in Windows 7 without problems ?

Is it possible tun run Photoshop Elem 4.0 in Windows 7 without problems ?
Warnings about compability problems.

Please refer to this related post
http://forums.adobe.com/message/4964761#4964761

Similar Messages

Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine without problems

Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine without problems? I have over 400 GB,s free disc space (c drive) and still am getting lots of errors and program closing problems. I do not have USB3 on my machine so if I purchased a few 256 GB ssd drives would this help it from crashing?
Thank you in advance for any guidance.
Message was edited by: jackg032

jackg032 wrote:
Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine without problems? I have over 400 GB,s free disc space (c drive) and still am getting lots of errors and program closing problems. I do not have USB3 on my machine so if I purchased a few 256 GB ssd drives would this help it from crashing?
Thank you in advance for any guidance.
Message was edited by: jackg032
Jack, as Curt has suggested, available drive space comes well down the list regards a happy experience with Photoshop. You have also asked a self-defeating question, because the fact you are running Vista, and a 32bit version at that, more or less precludes the ability to run without problems.
Windows 7 was billed as the first MS OS to need less system resources than its predecessor. If your system hardware will support 64bit, then consider paying $90 for an OS upgrade What is your system out of interest? I have a feeling you are running with just 2Gb RAM, which just isn’t enough. Post your specs or make and model, and I am sure you’ll get some help with what your mainboard will handle by way of RAM and whether it will support 64bit.

I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.

Bei aktalisierung erfolgt das download, nach ende Download kommt Fehlermeldung fehler beim Download (Installation nicht möglich, Versuchen Sie es später noch einmal.
Kennt jemand das Problem, was kann ich tun?
Harald Bässle
Emailaddresse: [email protected]

Hello,
I installed the newest Application Manager some updates seems to be installed now but extension manager CS5 5.0 update is not successful > error code U43M1D207. What I must do?
I this the right way t answer?
Whating for reply
Thanks
Harald
Von: R_Kelly
Gesendet: Freitag, 29. August 2014 03:41
An: Harald Bässler
Betreff: I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.
I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.
created by R_Kelly <https://forums.adobe.com/people/R_Kelly> in Photoshop for Beginners - View the full discussion <https://forums.adobe.com/message/6683157#6683157>

Access denied in Windows 2012 Server Manager after a period of time working without problems

Hello,
I had 2 servers with windows 2012 installed in a domain (dc is in a 3rd server) and both added to server manager of each other. Both servers had Failover cluster installed and configured roles. After startup in both servers i can see the other and manage
it without problems (in server manager and failover cluster manages) but after a period of 30-40 minutes in both servers I see "Online - Data Retrieval failures Ocurred" for the partner server and "Online - Access Denied" for local server.
When I access de Failure Cluster Manager I had errors accessing resources and roles and can´t failover the cluster.
I removed the failover cluster thinking that could be the original problem, remove servers from domain, change names and add again to the domain without install failover cluster.
Now, the servers have not the failover cluster feature and the problem persists. 30-40 minutes after boot the server manager show messages of inaccesible partner with same messages. I tried to execute powershell commands to add a new ip to the NIC and I
receive a Access Denied Message and show Access Denied message in other events in log.
I´m using Domain Administrator Account and tried different solutions but not solved. I saw that this message can occur in a variety of different scenarios, but i don´t know why works during a period of time before failing. It´s frustrating
Regards
EDITED: in detail of Online - Data retrieval failures i see that: Configuration refresh failed with the following error: The metadata failed to be retrieved from the server, due to the following error: The WS-Management service cannot process the request.
The WMI provider returned an 'access denied' error.

Hi PabloVDL,
It seems is this two server has register the incorrect DNS, please try to add this server manage NIC IP to your manager hosts file or if possible trmpory disable the useless NIC DNS register. This issue also some times caused by when you installed
the HP insignth management, if in your environment you have this tools please temporarily uninstall it.
More information:
Windows Server 2012 - Server Manager Troubleshooting Guide, Part III: Common
Events and Errors in Server Manager
http://social.technet.microsoft.com/wiki/contents/articles/13445.windows-server-2012-server-manager-troubleshooting-guide-part-iii-common-events-and-errors-in-server-manager.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Would a MacBook Air run PowerPoint files created in Windows without any problems?

I am considering buying a MacBoo9k Air. However, I need to be sure that it would be able to run, edit, save without problems files created in PowerPoint with a Windows-based PC. Do I need a special software for this?

Yes, Powerpoint Mac should be identical to Powerpoint PC. Powerpoint on the Mac will open Powerpoint files created with the Windows version.
In practice, that isn't entirely the case, as there are different versions of both Powerpoint Mac and PC.
You need to be running the latest versions of both on the Mac and PC.
Even then you may have some minor formatting issues. Whether you consider that a problem, is up to you.
I only way to ensure that the Powerpoint files edited on the Mac display correctly on your Windows PC is to run the Windows version of Powerpoint either in Bootcamp or Parallels/Fusion on your MacBookAir.
It's not as seemless as it should be, however, Bootcamp or virtualization ensures you can run the Windows version of Powerpoint if you need to.

How come when I update Firefox in Ubuntu, the existing french language package is not functional while in Windows, it always works without problems?

When I upgrade Firefox (French, from 13.0 to 13.0.1) in Ubuntu, the existing french language pack does not work, while in Windows 7, it does work without problems. It seems to me that the language pack should be system independent.
This problem happens in Ubuntu everytime there is an upgrade, and it is usually very difficult to find the correct language file that wors in Ubuntu. Again, in Windows, no such problem.
I am puzzled.

You always need to reinstall language packs if you update Firefox because the updater doesn't seem to be able to find them on its own.
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/win32/xpi/
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/linux-i686/xpi/

I am having problems importing some CDs into iTunes on a laptop with Windows 8. Most CDs import without problem. The ones I can't import can be imported into iTunes with Windows 7. Does anybody know why this problem is occurring?

I am having problems importing some CDs into iTunes on a laptop with Windows 8. Most CDs import without problem. The ones I can't import can be imported into iTunes with Windows 7. Does anybody know why this problem is occurring?

First-off, this seems to be a general problem with 10.4 (across all the operating systems of which I am aware). Unfortunately, I cannot provide a permanent solution but, if you need a quick fix, this will (hopefully) work for you.
For some inexplicable reason, iTunes no longer recognises standard Windows paths. For example:
Y:\Music\Buddy Holly\Buddy Holly - Rave On.mp3
The end result is that it will import a playlist with no content.
It will, however, recognise the equivalent Apple paths which look like this:
file://localhost/Y:/Buddy Holly/Buddy Holly - Rave On.mp3
It is possible to convert your existing playlists using a few basic replace commands in something like Notepad. In my case, I made some code changes in my music manager and now generate two sets of playslists (one standard and one to accommodate iTunes).
Forgive me foir stating the obvious but please remember to make sure that the disk / path containing your music is accessible when doing the import otherwise you will probably get a blank result. Note that you can do a bulk import by selecting all the (revised) playlists and dragging them onto the iTunes sidebar.
I am sorry that this is not a "clean" solution but it will work if you are in a bind. The only alternative of which I am aware is to wait for Apple to fix the problem.

I have a desktop machine windows 7 based with CS5 loaded and working without problem. I have recently purchsed a laptop running 8.1 windows. I have loaded the cs5 package onto the laptop and it appears ro work but I am being told there are updates. I hav

I have a desktop machine windows 7 based with CS5 loaded and working without problem. I have recently purchased a laptop running 8.1 windows. I have loaded the cs5 package onto the laptop and it appears to work but when I try to update, although I am being told there are updates it attempts to download the update but then tells me there is a problem and to quit and try again later.. I have tried a number of times to download the updates but itkeeps telling me to quit and try later. what is wrong please?

There could be a 32 bit vs 64 bit issues-is the old machine a 32 bit? and what is the new machine as far as 32/64 bit. I am not sure now if CS5 has in the help menu of the PS app the selection to update within PS if so that might work. I know that the Creative cloud app for installs updates etc has caused me much consternation over the last couple few years. Last it could be something like your Software firewall settings or anti-virus anti malware programs. I know that updating the infamous adobe flash that Internet Explorer pop ups setting and having AV turned on as opposed to off can interfere or plain break the update ability

ITunes will not open in Windows 7 for one User. All I get is the Licence Agreement pane and when I click YES nothing further happens. I have set up a second user and iTunes opens without problem in that User window.

Clearly something is blocking the main user(administrator) from opening the iTunes programme and I cannot find a solution.

Many thanks for your reply. Yes I carried out the suggested procedure in safe mode , which did not resolve the issue and so this is what led me to set up a second User account. iTunes opened without problem in this second account and so I looked at the User-specific troubleshooting but I just could not locate the iTunes Preference files no matter how much searching I did.
I also tried uninstalling and re-installing but the problem persists. Would be very grateful for any further advice.
ollie66 Gorran Haven, Cornwall, England.

How to open a new browser window without toolbar, location, and menu bars from AIR?

I have the following problem in my Flex+AIR application. I need to embed an ActiveX component that has JavaScript API inside my application. I tried to embed it inside <mx:HTML> component but unfortunately, AIR doesnot support plug-ins or ActiveX controls. So I've decided to open it in a new browser window. I tried navigateToURL(...) method but it has two problems - it is opening a new tab in the existing browser window and there is no way for me to configure the new browser window appearance, like removing toolbar, menu bar, location bar, etc. Then I tried to open a new window from JavaScript running inside <mx:HTML> component using window.open(...) API but it doesn't open a new window at all.
Is there any way for me to open a new browser window without toolbar, location bar, etc. (which will run ActiveX control, so it cannot be AIR window) from inside AIR?
Best regards,
Arkady.

Is it possible to open a new browser window using JSP?a JSP page is also an HTML page, this is client side stuff, you can do it with JavaScript.

Firefox asks (twice) to save and close tabs, on new open windows without tabs, when i close them.

About one month ago, i started to receive a message box from firefox, asking if i wanted to save and close tabs, on newly open windows (and pop-ups) without any tabs open on them.
And everytime i close the windows without tabs, firefox asks it twice...
I did not made any changes, so i don't know why it started doing this.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

How do I Link to _blank window without headers?

I am creating a page that links to a flash slide show. When
the user clicks on the link to the slideshow, I want the flash
movie to open up in its own window, without all of the usual
Explorer toolbars and menus at the top of the page. I set the link
to _blank, so I do get a separate window. Now, what is the trick to
getting rid of the junk at the top of the page?
I know it can't be very difficult, but I'm puzzled.
Thanks!

This is a problem with your brother's browser. The code is
correct.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"janeinpa" <[email protected]> wrote in
message
news:fbi8g5$med$[email protected]..
> Hi, Murry...
>
> Your solution worked great on most of the computers I
tried. However, I
> was
> just at my brother's house & tried to click the link
that opens just the
> slide
> show. I got an error -- something about no object at
line 2. It wouldn't
> open
> the slideshow, but opened a big, blank window. I thought
maybe he needed
> Flash
> Player 9, so I downloaded it, but it still didn't work.
He's using IE 7.
> I
> also turned off his pop up blocker, but that didn't help
either. Any
> ideas? I
> came home & it works great on my computer! You can
see it at
> www.allisonwebcreations.com/africa/slideshow.htm The
link at the bottom
> opens
> the show in its own window.
>

Dear ladies and gentlemen! I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Ad

Dear ladies and gentlemen!
I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Adobe Acrobat 9 Pro has released version 9.0.0. Two updates this version is not listed. Please inform me how I can fix this problem.
Sincerely, Walter Hacksteiner
mailto: [email protected]

The first thing I would try is to update Acrobat 9 to the latest version 9.5.5
The next thing would be to run Acrobat 9 in Windows 7 or Vista or XP Compatibility Mode.

Any way to open new browser window without using image maps?

Is there any way to open new browser window without using image maps? My code works fine in Firefox, but not in IE. There are 2 problems in IE: 1st is that the thumbnail images move up within their own borders & 2nd that when you click on an image it does open up a new browser window, but also redirects to the index page (in this case it's just a placeholder index page - the new one I've called index_new.html for the time being).
Here is the link:
http://www.susieharperdesigns.com/gallery_beads.html
Any help is greatly appreciated.

Your missing a value on the HREF. In your code you have this:
<area shape="rect" coords="-24,-9,106,144" href=" " onclick="MM_openBrWindow('gallery_bead1.html','','width=255,height=360')" />
</map></div>
and it should be this:
<area shape="rect" coords="-24,-9,106,144" href="javascript:void()" onclick="MM_openBrWindow('gallery_bead1.html','','width=255,height=360')" />
</map></div>
If you fix the code on all your beads, it should work.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

My comp with Windows7 doesn´t recognise iPhone 5c. I reinstalled USB drivers,iTunes,restarted both devices but without positive result. iPad is recognised on the same comp without problems. Could me somebody help?

My comp with Windows7 doesn´t recognise iPhone 5c. I reinstalled USB drivers,iTunes,restarted both devices but without positive result. iPad is recognised on the same comp without problems. Could me somebody help?

Hi there tsubert,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Elem 4.0 in Windows 7 without problems ?

Similar Messages

Maybe you are looking for