Element 13 editor does not launch and I do not have error code of message

I have E13 for a couple of months.  I have used the organizer and editor without fault.  For some unknown reason the editor will not lauch.

Hi Carolyn,
Thank you for your time and response. The trouble is I am unable to launch iTunes? I have restarted my macbook air a number of times to try and initiate the application but the issue persists and the application remains unresponsive. Will not launch?
Thanks

Similar Messages

  • My Adobe Premiere Elements 11 Editor just stopped launching and crashed every time now... getting fed up.

    My Adobe Premiere Elements 11 Editor just stopped launching and crashed every time now... getting fed up.

    tomstanding
    Thanks for the reply. You have a lot of considerations before you.decide to purchase additional software.
    Great that the Photoshop Elements 11 Editor from Mac App Store is working, but I am not sure how that was integrating with Premiere Elements 11 Editor or will interact with Premiere Elements 11 Mac if you can find the latter for purchase online from Amazon or other. (I realize that the Mac App Store products did not come with Elements Organizer 11; whereas the Premiere Elements 11 Mac does.)
    If you want to add Premiere Elements 11 Mac to your computer, it might be a good idea to look at the tryout from the following web site, and then purchase from your selected vendor. The web site offering the 11 tryout does not sell the tryout as far as I have ever heard.
    Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
    With this route you need to read and carryout carefully that web site's "Note: Very Important Instructions" in order to avoid access denied messages.
    When you purchased 11 Mac, you could even leave that tryout installed and just insert the serial number from your purchased 11 product in them to make
    that your working system.
    Please consider.
    Thank you.
    ATR

  • Photoshop elements (photo editor) does not start

    Photoshop elements (photo editor) does not start after replacement of the mainboard of the computer.
    We uninstalled the software and reinstalled it but it still refuses to work.
    System is Windows7 64 bits

    I have the same problem, does no one from Adobe look at this forum? I have done the mentioned things and nothing works. I am trying to get a project done and this very frustrating. I too should have gone with a Mac

  • Adobe photoshop elements 12 organizer works, but adobe photoshop elements 12 editor does not work--it thinks it is a trial version

    adobe photoshop elements 12 organizer works, but adobe photoshop elements 12 editor does not work--it thinks it is a trial version.HELP
    If I try to register 4 boxes circle endlessly.Why should I have to register editor separately from organizer?

    jaroFocb'15 wrote:
    This is almost the same as the problem I had. I'm my case the Editor installed but not the Organizer! Adobe chat told me they no longer have chat or any other services for Elements 12. I guess they want people to buy their new Elements 13, but that leaves us in a bad place and doesn't say much for how Adobe cares about their customers After it moves on to their next version. I posted a message like yours over a week ago, and only got one email from an Adobe staff person, asking me to answer a couple of clarifying questions, but he never followed up on my response, so my problem is still unresolved. If you are luckier and are given a solution please let me know what it is -- it might work for me too, and I'd be very grateful!  My email:  [email protected]  
    Good luck.
    Have you checked whether you have folder for PSE Organizer?  It is normally at this location in Windows 7 and Windows 8/8.1:
    <C:\Program Files (x86)\Adobe\Elements 12 Organizer>
    If the folder is there then try double-clicking on the file called:  PhotoshopElementsOrganizer.exe
    If the folder isn't there at all then you need to re-install the package again using your original disks or from download from Adobe website.  <Download Photoshop Elements products | 13, 12, 11, 10>
    Hope this helps.

  • PSE Elements 9 Editor does not recognize scanner

    Mac OS 10.7 Lion. Adobe Photoshop Elements 9 Editor does not recognize my scanner (Epson 3170 Photo) even though scanner shows up in Preferences Print & Fax. Awkward workaround is to scan to desktop and open scan in PSE9.

    Over in Windows, applications link to a scanner via TWAIN software, which is not included with Windows 7 - so the solution is to manually download the twain driver and install it 
    How do applications link to a scanner using a Mac, and does your OS include that driver?

  • Org.eclipse.core.runtime.CoreException: Text editor does not have a documen

    Hi all,
    strangely on most hprof-files while opening them as snapshot
    I get a org.eclipse.core.runtime.CoreException (see below the stack trace).
    This happens indipendently if launching MemoryAnalyzer as standalone (MemoryAnalyzer.sh)
    or within my Eclipse SDK platform (Version: 3.3.2).
    It seems to depend of the hprof-files itself, if the error raises or not.
    For example the HeapDumpSamples from the snapshots dir are not affect to this problem,
    maybe the size of the dumpfile is deterministic ? Any help or hint is welcome, thanks.
    org.eclipse.core.runtime.CoreException: Text editor does not have a document provider
         at org.eclipse.ui.texteditor.AbstractTextEditor.doSetInput(AbstractTextEditor.java:3947)
         at org.eclipse.ui.texteditor.StatusTextEditor.doSetInput(StatusTextEditor.java:190)
         at org.eclipse.ui.texteditor.AbstractDecoratedTextEditor.doSetInput(AbstractDecoratedTextEditor.java:1225)
         at org.eclipse.ui.editors.text.TextEditor.doSetInput(TextEditor.java:168)
         at org.eclipse.ui.texteditor.AbstractTextEditor$19.run(AbstractTextEditor.java:3003)
         at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:369)
         at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:313)
         at org.eclipse.jface.window.ApplicationWindow$1.run(ApplicationWindow.java:758)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
         at org.eclipse.jface.window.ApplicationWindow.run(ApplicationWindow.java:755)
         at org.eclipse.ui.internal.WorkbenchWindow.run(WorkbenchWindow.java:2451)
         at org.eclipse.ui.texteditor.AbstractTextEditor.internalInit(AbstractTextEditor.java:3021)
         at org.eclipse.ui.texteditor.AbstractTextEditor.init(AbstractTextEditor.java:3048)
         at org.eclipse.ui.internal.EditorManager.createSite(EditorManager.java:794)
         at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:643)
         at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:426)
         at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:592)
         at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:263)
         at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2739)
         at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2651)
         at org.eclipse.ui.internal.WorkbenchPage.access$13(WorkbenchPage.java:2643)
         at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2595)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
         at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2590)
         at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2574)
         at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2557)
         at com.sap.tools.memory.ui.core.actions.OpenSnapshotAction$1.visit(OpenSnapshotAction.java:68)
         at com.sap.tools.memory.ui.core.actions.OpenSnapshot$Visitor.go(OpenSnapshot.java:78)
         at com.sap.tools.memory.ui.core.actions.OpenSnapshotAction.run(OpenSnapshotAction.java:57)
         at com.sap.tools.memory.ui.core.actions.OpenSnapshotAction.run(OpenSnapshotAction.java:52)
         at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:256)
         at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
         at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:546)
         at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:490)
         at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:402)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1101)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3319)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2971)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
         at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
         at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
         at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
         at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
         at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
         at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
         at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
         at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
         at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
         at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    Hi Guenther,
    I have a guess...
    The Memory Analyzer is implemented as an Eclipse editor. That means, Eclipse decides based on the extension what editor to open. We have registered the editor for the hprof extension.
    Sometimes, heap dumps end with the timestamp, like java_pid282.hprof.200804031745. If you use "Open Heap Dump" then we will try to rename the file. If you use "Open File", it will try to open the heap dump with the default editor as it doesn't know the 200804xxx extension. The default editor is the text editor and that will not work. So the work-around is renaming the file.
    Kind regards,
      - Andreas.

  • I received a message on my new Samsung S5 that said this mobile number does not have permission to send messages.  Further it say to contact the acct. owner (me) to change permission.  What is this aboutand how do I grant permission?

    Duplicate post - please see:
    I got an new Samsung S5 this week.  Now I am getting a message saying that this mobile number does not have permission t…
    Message was edited by: Admin Moderator

        Congratulations on your new phone Gramps5019! Let's make sure we fix this asap. All you have to do is go to Settings from your phone, the More>Select 'Default SMS App' and choose "Messages" instead of "Messages ". This will fix it. 
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • Elements 12 editor does not recognize .jpg

    My Elements 12 image editor will not open a jpeg.  It will open a tiff and other files but not a file ending in .jpg.
    For many years I have used Elements to open my iPhoto images and edit them. I used to use Elements 3, then Elements 6, and finally Elements 12.  Elements 12 worked fine up until last night when I could not make it open any iPhoto jpegs.  I have Elements 12 selected in my iPhoto Advanced Prefs to be the app to edit my iPhoto images.  It worked fine up until yesterday when it no longer would open an image.
    I soon discovered my Elements 12 will not open any jpeg even if I were to drag an image from my desktop to the editor.  Some times I see a pop up note saying that my Elements 12  does not recognize a file ending with .jpg
    If I double click several times on Edit in my iPhoto, Photo Ninja will open the image and tell me that Photo Ninja will now edit the image.
    Any help will be appreciated.
    Walter Holt
    Mac Mini running OS X 10.9.4
    Elements 12 installed from a purchased DVD
    iPhoto ver 9.5.1
    Photo Ninja as a stand alone App.

    Editor is set to print a 10.2 x 15.2 cm image on A4 paper in landscape
    view and appears to be the right proportion in the preview pane.
    "Editor is set to print a 10.2 x 15.2 cm image".
    This is not clear to me. How/what is set?
    A4 paper is 29.7 cm x 21 cm.
    Are you trying to fill this entire sheet of paper with one image, or are you trying to print a picture package?

  • PS Elements Photo Editor does not start

    I downloaded PS elements from amazon a few months ago and for a while it worked fine. Just recently it now will not start. I have re downloaded and re-installed with no luck. Organizer still works but editor will not. I am running windows 8.1 with 16 gb ram so its not memory. Anyone got a solution please?

    Moving this discussion to the Photoshop General Discussion forum.

  • I got an new Samsung S5 this week.  Now I am getting a message saying that this mobile number does not have permission to send messages and to contact the acct. owner (me) to change permissions.  How do I do that?

    All I did was tap the red message+ icon on the home page and I got this as one of the messages.  I do not know where to go to grant the desired permission.

        Congratulations on your new phone Gramps5019! Let's make sure we fix this asap. All you have to do is go to Settings from your phone, the More>Select 'Default SMS App' and choose "Messages" instead of "Messages ". This will fix it. 
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • Creating a copy of an existing JTable that does not have source code.

    Hi
    I am working on a java swing based application. We used a third party API for JTable for showing some data in a table format and also for printing function. As of now print button is printing the whole table being shown in the application. Our new requirement of printing is �Users don�t want to print all the columns being shown in the application and they wanted to have print of columns whatever they would like to see�.
    The above requirement can be fulfilled if I can have a copy of the existing table. Unfortunately we don�t have the source code of the table being shown in the application as we are using 3rd party libraries. Had the source code been there I could have implemented cloneable interface or proto type pattern.
    Can some body help me how can I create a copy of the existing table? Basically the high level approach I thought of is create a new object of the table class and copy the properties/attributes of the existing table to the new table object. But I don�t know what attributes should be copied so that I can have the copy of the original table and how to construct (code) this new table.
    I would be very grateful if some one could help me with this.
    Thanks & Regards
    Srini

    I understood your suggestion. But it would be very difficult to migrate as it requires lot of changes across different tabs of the existing application. This application was developed around 6 years ago. And this change would require lot of regression testing too.
    Do you have any idea of creating the copy of the available JTable object?

  • Elements 12 Editor does not print out images as specified.e.g a 15cm x 10cm image prints out as 10cm

    In elements 12 images print out truncated,e.g a 10cm x 15cm image,altho in preview seems O.K prints out as 10cm x 10 cm

    Editor is set to print a 10.2 x 15.2 cm image on A4 paper in landscape
    view and appears to be the right proportion in the preview pane.
    "Editor is set to print a 10.2 x 15.2 cm image".
    This is not clear to me. How/what is set?
    A4 paper is 29.7 cm x 21 cm.
    Are you trying to fill this entire sheet of paper with one image, or are you trying to print a picture package?

  • Downloaded Premier Elements 9 It does not have SartSound in the Audio Tools Button. How can I get it

    Having pruchased Premier Elements vis download, I obviously have not installations disc. After working on a project, I went into audio tools to open SmartSound Quicks. It was not included in the tools menu. I know you can add it to tools if you purchased Pre 9 retail and have the disc. Is this an error in that it is not included in the download version? If not, why was not downloaded and how can I get it? Is there a plugin available. Smart sound shows one I believe for Pre pro. Will that work for Pre 9?

    I hope what I am telling you responds to what you would like to do.
    As one of the respondents mentioned, you can't use AirPlay.  What was not mentioned is you can use HomeSharing.
    You need to activate Home Sharing on both your computer's iTunes/Prefs/Sharing and in Settings/iPod in the iPad.  Using the iPod app, select your computer's library and initiate any requests (music) on the iPad.
    Personally I believe Airsharing and Homesharing are some of the worst work I've seen come out of Apple.  Its inconsistent between devices and is needlessly complicated by having two different capabilities essentially doing the same thing.  Throw in the Remote app and you now have three capabilities essentially doing the same thing with different interfaces and inconsistent functionality.

  • CD/DVD drive does not work - error code 39 on Satellite A300

    Good evening.
    I've encountered a problem with my Satellite A300.
    I can't get the disk drive to function.
    Device manager says the driver is current. But also says it is corrupt "code 39".
    I have tried downloading new drivers from Toshibas website but they all come up as code 39 unable to install. The first I noticed it was last night when I was installing Norton 360. I had the cd it worked once then nothing.
    Has anyone ran across this before?
    Any help would be greatly appreciated.

    Hi
    I had the same issue and I found a solution here in the forum.
    The problem is that your Windows registry is muddled up.
    You should firstly access the device manager and should remove the CD/DVD drive from the device list.
    Secondly you have to start the registry and have to remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Finally reboot the notebook and test the CD/DVD drive again!
    Bye

  • I tried to install CS4.  It installed with errors.  How do I reinstall it so it does not have errors

    Please help.  I am unable to move to Creative Cloud as we have tremendously slow internet service in the area.  The CS4 program offers most of the features I require so I haven't upgraded. 

    What errors are you getting?  Be as detailed as possible - use screenshots if you cannot describe what you see.

Maybe you are looking for