Element 6 Suddenly Stopped Working on MacBook

I have not idea why the program stopped working.  It won't fully launch.  Tried reinstalling it and still not working.  Any ideas?  Other programs all seem to be working fine.  I could bring the computer in for evaluation at Apple store.  Not sure what next steps should be.  Thoughts?

http://forums.adobe.com/message/5860819#5860819

Similar Messages

  • Elements 11 suddenly stops working and program closes

    After a few minutes of working on a collage or photo book page in elements 11 a message appears saying the program has stopped working,  and the program closes. I have 4 GB RAM, 100 GB free space on a 287 GB hard drive, and a 64 bit version of windows 7. What's going on?

    Added to aboev comment. Even in when in the Metric (cm) Photo Project Units setting, if you select the Horizontal orientation under Create\Photo Collage the whole application will crash. Tried this several times (even after resetting preferences per ~bridge_mastero~ above.
    BTW, Thank you ~bridge_mastero~, at least your suggestion allowed this application to partially work. Adobe needs to get this bug fixed!

  • Front row suddenly stopped working on MacBook

    Front row wont start. I am not using it frequently, so I can't say when it stopped working. However, I can control Itues the remote works well with iPhoto too. So there doesn't seem to be any problem with the remote. But, if I press menue, front row wont start, the same if i try the apple button and escape.

    Have a look around the forum before you post; you would have found the "No Front Row on MacBook Pro" thread, which contains the fix (install the 1.3.1 update).
    Message was edited by: Wildatheart

  • MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that.  Any help on how to fix this? How do I know if it is the airport card or not?

    MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that.
    Any help on how to fix this? How do I know if it is the airport card or not?
    is there anything else I can try first?
    thanks

    If the technician at the shop is competent, he has given you a diagnosis that should have identified the problem.  You could run the Apple Hardware Test to verify the findings:
    https://support.apple.com/en-us/HT201257
    Note the Apple Hardware Test is not definitive.
    Go to the iFixit.com and Powerbookmedic.com web sites.  They have parts and installation instructions.  To install an Airport card is fairly easy.
    Ciao.

  • My Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. Any anwers

    I receive Adobe updates on a regular basis without any problems. The other day, my Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. I can open all the other function buttons without any problems just not the most important one which is the Editor Function. Has anyone experienced this situation and knows what to do?

    Did you tried uninstalling and then installing it again?
    Ankush

  • My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    try this.
    get back into your router's settings and start deleting devices that are not connected to your router.
    you can also delete the ones that are connected - they'll connect again.
    on the DHCP side of it, increase the amount of users that can connect/log in to your router.
    see if that sorts it out for you.
    good luck.

  • My edit page in in elements 9 has suddenly stopped working. How can I get it to the workspace?

    My edit page in in elements 9 has suddenly stopped working after over a year. How can I get  the workspace to open?

    You can try Restoring it in iTunes. If that doesn't work you will need to get it serviced.

  • Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing

    Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing happens. Now I have reinstalled windows but still with the same result. I was using the program for several months without problem until yesterday when it suddenly stopped working. Any suggestions on what to do?

    same question with PS11

  • Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine?

    Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine? Is this because of some recent software update by Apple? 8x8 support acknowledges issues with no current work-arounds? The 8x8 desktop app worked until early December, then quit. I've deleted and re-downloaded the app, but no difference.

    The solution is :
    1. Delete iPhone configuration utility. Just drop it to the trash
    2. Run
    sudo rm -rf /private/var/db/receipts/com.apple.pkg.iPhoneConfigurationUtility.*
    rm -rf ~/Library/Preferences/com.apple.iPhoneConfigurationUtility.plist*
    3. Delete the whole folder: /System/Library/Extensions/AppleUSBEthernetHost.kext
    4. Reinstall iTunes (just over the previous one)
    5. Restart
    incase of any issues, visit this thread: https://discussions.apple.com/thread/3725328?start=15&tstart=0

  • The keyboard and trackpad to my 2008 MacBook suddenly stopped working, what's wrong with it/ what should I do to fix it?

    The keyboard and trackpad to my 2008 MacBook suddenly stopped working. I've restarted the computer several times and no help. I had some keyboard maintenance done a few months ago at a repair shop so I don't know if that has anything to do with it. What should I do?

    First thing I would try would be to remove the battery from your MacBook, connect the computer to it's power adapter and start up, then see if the keyboard and trackpad work normally. Some older batteries have been known to expand and interfere with keyboard and trackpad. If this works, replace the battery.
    Best of luck.

  • Why has my USB Superdrive suddenly stopped working with my MacBook Pro?

    Why has my Apple USB SuperDrive suddenly stopped working with my MacBook Pro?
    Normally I plug it in and insert a CD or DVD and it is immediately recognised, but today it took the DVD, made a 'whirring' noise for a few seconds and then stopped without being recognised.

    Try the options on this list:
    Credit Kappy.
    Try 1 and 5.
    Ciao.

  • HDMI port  on Macbook Pro suddenly stopped working. How much is it to fix?

    HDMI port on Macbook pro suddenly stopped working. Is it expensive to fix?

    No one here can tell you what the prices are to repair things. We are just users such as yourself.
    What makes you think your HDMI port is dead?
    You can take it to a Genius Bar for a FREE diagnosis, make an appointment first.
    http://www.apple.com/retail/geniusbar
    Also check system preferences/Displays make sure that you have all the correct settings.
    Check that the cable you are using is good.
    Make sure the display you are connecting to is set correctly.
    Check here:
    http://support.apple.com/kb/ht1573
    Try resettind SMC:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    .   RESET PRAM:
    Shut down your Mac.
    Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on your Mac.
    Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
    Release the keys.

  • Hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

  • My MacBook charger suddenly stopped working

    Could you please tell me what to do? The charger suddenly stopped working? No accident, no fluids dropped on it, no overheating etc.....The only problem I can think off is that I roll it up to store it.
    Can anyone help me through the "trouble shooter" of figuring out what is wrong with it suddenly ???? Using for the moment a friends charger and my computer is charging, so its not the computer that has a problem, just the charger. Thanks for your help!
    This is the charger info. It says "not connecting" but the charger is plugged in!
    Battery Information:
      Model Information:
      Serial Number:          9G0161CT0E1MA
      Manufacturer:          DP
      Device name:          bq20z451
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0201
      Hardware Revision:          0002
      Cell Revision:          0158
      Charge Information:
      Charge remaining (mAh):          5001
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          5196
      Health Information:
      Cycle count:          210
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -529
      Voltage (mV):          12373
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No

    I've had this problem twice now. This is my second MagSafe power adapter and since my first one became strained and frayed I have taken extra care of this one. All of the sudden it stops working today and nothing seems to help.
    My other one lasted nearly two years and this one that I've been taken care of has not even lasted six months.
    Are they really that poor quality? I feel like something else has to be wrong here.

  • USB port stopped working in macbook pro

    Hi, i bought a macbook pro, OS X lion, version 10.7.4 a month ago. one of my USB port suddenly stopped working. i am a new mac user, so i have very less idea about mac. i would appreciate if someone could give me step by step solution to this problem. thanks in advance

    Try Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, you have to take the MBP to the Apple store for evaluation.
    You have 90 days of free tech support from AppleCare from the date of purchase.
    AppleCare: 1-800-275-2273.
    Best.

Maybe you are looking for

  • Conditionally Color a row based on the Day of the Week for that row ?

    Hi, I have a Table containing some timing entries for each day. I have been trying to format some rows depending on a value in one of the columns for that row. What I would like to achieve is color the cell background gray for every row where the Dat

  • How to Insert Multiple Icons in a Canvas?

    Hi All I am new to MIDlets so I need some initial help related to UI generation in MIDlets. I have to Insert multiple Icons in a canvas. These Icon should behave like button i.e. all Icon must have key-pressed event separately(i.e. when any particula

  • Quicktime: Sound off during movie recording and preferences won't open

    Ever since I updated to Snow Leopard I can't open Quicktime preferences anymore. In addition, when I try to record a video+sound, the sound is always off and not recording in real time. Does anyone know how resolve these issues? Thanks in advance! Me

  • How do you create Client Data Model Definition (cpx) in 10.1.2  struts proj

    I recently upgraded to 10.1.2 and am starting a new project with a BC4J model project and a struts view project, for the life of me I can't see how to create a New Client Data Model Definition in 10g! Searching through the help I couldn't find a clea

  • Delivery Address in Despatch Advice

    Hi all, Where in despatch advice, we can enter delivery address? My client use to maintain one dealer in system but the delivery address changes every time depends on the client. Best Regards, AI.