Element Set Issue ..

Dear Friends,
I have a doubt in Elment set, can any one pls let me know what is the Difference between Customised set, Run Set and Distribution set ..
thanks in advance
with regards
Swpana

Distribution Set is used for Distribution of Costing of an Element based on Other set of Elements. E.g. If Tax should be distributed based on Cost accounts and values of Regular and Bonus, then you would create an Element Set including Regular and Bonus and use the Element set while defining costing details for Tax Element (at Element Link Level)
Run Set is used for normal grouping of Elements in other Payroll processes such as Payroll Run, Retropay, BEE etc.,

Similar Messages

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
I hope that will work.

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

My nano Gen 6 just loses volume for no reason, one minute I hear the music the other it's gone, I have to raise the volume manually. Is it a setting issue or a defect? Thanks

My nano 6g just loses volume for no reason, one minute I hear the music the other it's gone, I have to raise the volume manually. Is it a setting issue or a defect? Thanks

If your ipod gets wet, it can cause the buttons to activate all by themselves. This can cause the volume to go up, down.
If you have a headset with buttons on the wire, check there first. Try a different set of headphones and see what the result is.
Finally, if the volume is changing a huge amount but only for certain tracks, there is an adjustment you can make on individual tracks in iTunes. Do a get info on one of the tracks doing this, then click the Options tab. Note that there is a volume adjustment slider. Make sure it is set to none.
i

When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice. I'm sure it's a simple setting issue. Any thoughts ???

When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice. I'm sure it's a simple setting issue. Any thoughts ???

have the same issue on my 9630 after upgrading to 624 version. It momentarily shows the previously callers information before showing the new caller's info.

Error in Element Set LOV

Hi All,
I have created Element Set with all Non Costed Earning type Element. But when I am tying to select Element Set value from LOV, it shows following error:
APP-FND-01436: List of Values cannot find any values for you to choose.
Please check following details for your reference:
Application: 12.1.3
Respnosiblity : UK HRMS manager
BG: UK Payroll BG ( Seeded )

The element set type should be Run Set
below is the query which gets you the data for the LOV.
select t.element_set_name, t.element_set_id
from
pay_element_sets e,pay_element_sets_tl t,per_business_groups_perf p
where (( e.business_group_id = p.business_group_id
) or ( e.legislation_code = p.legislation_code ) or ( e.business_group_id is
null and e.legislation_code is null ) ) and element_set_type = 'R' and
p.business_group_id = :$PROFILES$.PER_BUSINESS_GROUP_ID and
e.element_set_id=t.element_set_id and t.language=userenv('LANG') order by
e.element_set_name;Please close the thread if your question is answered.
Cheers,
Vignesh

When trying to logout, I keep getting "the application safari canceled logout" even though I am not in Safari. This only recently started happening and I'm wondering if it is a setting issue or bug. Can someone tell me what to do?

When trying to logout, I keep getting "the application safari canceled logout" even though I am not in Safari. This only recently started happening and I'm wondering if it is a setting issue or bug. Can someone tell me what to do?

You don't have to be "in" Safari for it to cancel logout.
You have several different Applications open, and any one of them may cancel logout if conditions are just right.
Quit the Applications you are no longer using and your Mac will run better and faster. And it will logout instead of cancelling.

LEAD Codec for MotionJPEG-Premiere Elements Playback Issues

There are several reports online (here and elsewhere) recommending installing LEAD Codec for MotionJPEG-Premiere Elements Playback Issues. Most, if not all, of the feedback is that it works and is only $10 USA dollars.
Today I went in search of that codec at LEAD Technologies and could not find a $10 LEAD Codec.
http://www.leadtools.com/SDK/Multimedia/Multimedia-MCMP-MJPEG-codec.htm
Instead, I found a bunch of kits priced at way over $100.00.
From the chat service at that web site, I discovered that the LEAD codec is no longer sold separately. In order to get that codec, you would have to buy the Multimedia SDF Kit (priced $595.00).
Any workaround suggestions
OR
pay the $595.00 to get the LEAD Codec
OR
go the file conversion route for the MotionJPEG?
ATR

ATR,
Great news!
On the PrPro forum, it's been 100% for MainConcept, and 99% for Morgan. One user could not get the Morgan to work on his/her system, but that could well have been OE on that poster's part. Still, those are not bad odds, and the 'cost" of the Morgan is better...
Just glad that it worked for you.
Good luck,
Hunt

Can I get a phone contact number for Adobe Premire Elements tech issue?

Can I get a phone contact number for Adobe Premire Elements tech issue?

If your issue is about purchasing or downloading or installing a product, then Adobe Support is available via Chat.
If it is about how to use the product to do something then the forums and web and video tutorials are the ways to get your questions answered.

Incorrect embedded if test result on matrix element set to -0.0

For a matrix declared with:
public enum RotAxis
ALPHA,
BETA,
GAMMA;
float GetVectorElement(Vector3f v3fIn)
{return (this==ALPHA?v3fIn.z:(this==BETA?v3fIn.y:v3fIn.z));}
private Matrix3d axisM3d[] = new Matrix3d[RotAxis.values().length];
and set via:
private void SetAlphaRotationMatrix()
int amIndex = RotAxis.ALPHA.ordinal();
axisM3d[amIndex] = new Matrix3d();
axisM3d[amIndex].setRow(0, new Vector3d(1.0, 0.0, 0.0));
double radians = PIO180*aRotAngle[amIndex];
axisM3d[amIndex].setRow(1, new Vector3d(0.0, Math.cos(radians), -Math.sin(radians)));
axisM3d[amIndex].setRow(2, new Vector3d(0.0, Math.sin(radians), Math.cos(radians)));
private void SetBetaRotationMatrix()
int amIndex = RotAxis.BETA.ordinal();
axisM3d[amIndex] = new Matrix3d();
double radians = PIO180*aRotAngle[amIndex];
axisM3d[amIndex].setRow(0, new Vector3d( Math.cos(radians), 0.0, Math.sin(radians)));
axisM3d[amIndex].setRow(1, new Vector3d( 0.0, 1.0, 0.0));
axisM3d[amIndex].setRow(2, new Vector3d(-Math.sin(radians), 0.0, Math.cos(radians)));
private void SetGammaRotationMatrix()
int amIndex = RotAxis.GAMMA.ordinal();
axisM3d[amIndex] = new Matrix3d();
double radians = PIO180*aRotAngle[amIndex];
axisM3d[amIndex].setRow(0, new Vector3d(Math.cos(radians), -Math.sin(radians), 0.0));
axisM3d[amIndex].setRow(1, new Vector3d(Math.sin(radians), Math.cos(radians), 0.0));
axisM3d[amIndex].setRow(2, new Vector3d(0.0, 0.0, 1.0));
The following statements:
System.out.println("Rotation axis: "+raIn.name());
int amIndex = raIn.ordinal();
System.out.println("m12 = "+axisM3d[amIndex].m12);
System.out.println("m12 < 0.0 is "+(axisM3d[amIndex].m12<0.0?"true":"false"));
resulted in the following output:
Rotation axis: ALPHA
m12 = -0.0
m12 < 0.0 is false
Rotation axis: BETA
m12 = 0.0
m12 < 0.0 is false
Rotation axis: GAMMA
m12 = 0.0
m12 < 0.0 is false
The question is why did the embedded if statement fail for the ALPHA m12 element set to -0.0; yet, generate a -0.0 string for display? This behavior makes it hard to align values when testing for a minus sign.

Hi Eugene,
i suggest you raise an SMP ticket for these.
Looks like a bug at first glance.
regards
Phil

Elements 12 version set issue in Organizer

The inclusion of edited versions in the Elements 12 Organizer inexplicably stopped working with in the last 3 weeks (I've had the software since June 2014). If I navigate to the edited photo in Windows Explorer, it is there but I cannot see it in the Organizer media window or folder view. It's as if it is invisible to the Elements 12 program. I have tried importing into the Organizer but it tells me the file all ready exist. To which I say, duh? I know that. I have not downloaded any new software, only standard updates, and to my knowledge, nothing has changed on my PC. Any suggestions as to what the issue is?

Thank you for the reply, MichelBParis.
I have done as suggested. Adobe Application Manager says my "applications are all up-to-date as of 1 minute ago."
Below is a copy of system info.
Elements Organizer 12.0.0.0
Core Version: 12.1 (20140303.12.1.49334)
Language Version: 12.0 (20130903.r.43239)
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: Not installed
Adobe Acrobat Version: Not installed
Are there any other suggestions as to what could cause version set feature to stop working properly?

Elements 9-cant edit, save and replace original like i used to. Setting issue?

I have had Elements 9 for a few years and ive always been able to edit and save and replace original if I wanted.... now when I save, my organizer shows the same file # twice. (example: DSC325)
but one is the orginal and one is the edited version.
If I delete the orginal picture, it now also deletes my edited version.
The only way to avoid is to "save as" on EVERY picture and then go back and delete the orginal unedited version.
Did I accidentally change a setting????

Yes I have 9.03
I use Fix... Full Photo Edit
I used to be able to hit SAVE... reaplce photo? Yes... and then the orginal was gone and the newly edited picture was now named the original file #. But now when I do that I get two pictures named THE SAME. So I have to do SAVE AS , change file name, and then go and delete the orginal photo.
Here are settings when SAVING.
Here is what DSC_0523 now looks like in organizer: it shows 2 of the edited picutre with the same name... instead of replacing it and showing only ONE file.

WSDL, custom datatypes, fault element name issues

Hello all,
I am having a LOT of problems with BEAs webservices. I am posting
this here in the hope that someone can help me and tell me what I am
doing incorrectly. I am running
WebLogic Server 7.0 SP1 Mon Sep 9 22:46:58 PDT 2002 206753
WebLogic XMLX Module 7.0 SP1 Mon Sep 9 22:54:41 PDT 2002 206753
Background:
My goal is to make my company's product web services aware. I take an
EJB, try to run it through the standard ant tasks and generate a web
services accessible EJB. Sounds pretty easy, but complex types seem
to make this quite difficult.
I have been able to create a web service accessible EJB (only since
7.0.1), but I am quite unhappy with the quality of what I am able to
produce.
I have a datatype which acts as a key, but it does not follow the
javabeans idiom - i.e. it does not have a default constructor or
accessor methods and I am not in the position to change it. I have
created a codec for this class which works and an xml schema (both by
hand). Its name is AgentKey. I have also had to use the autotyper to
create codecs and typemapping entries for java.util.Properties,
I can connect using the WebLogic classes and I am now trying to
interact using MS Excel and Apache's Axis as my test clients.
Issues:
My first question deals with generating a client. There seem to be
two ways to generate a client. Firstly via the <client> subtask of
<servicegen><service>, the second way via <clientgen> task. Since I
am using a custom data type (AgentKey) I have to manually insert the
AgentKey schema into the web-services.xml file generated by
servicegen. When I try to generate a client via the
servicegen/service/client task there is no opportunity for me to
insert this datatype schema information and I therefore get the
following messages (lots of them, but I'm only including one):
[servicegen] WARNINIG: Unable to find a javaType for the xmlType:['java:net.agentis.apml.runtime']:AgentKey.
Make sure that you have registered this xml type in the type mapping
[servicegen] Using SOAPElement instead
BTW: I am also receiving the same problem with java.util.Properties.
BTW: WARNING is misspelt
If I attempt to generate a client class via the <clientgen> task, I
need to supply either a wsdl or ear file as a parameter. I cannot
supply a wsdl file because I haven't deployed the EAR yet (and I don't
want to until the EAR has the client classes in it), and I can't
supply the EAR because I want the ear to include the client classes.
It is a bit of a catch 22 situation. Is there a solution I can't see?
NOTE: it would be very, very nice if you added a schemaMapping
attribute to the <servicegen/service> task so the web-services.xml
file didn't have to be manually hacked. Something similar to the
typemapping attribute already in the servicegen/service task would do
it.
My next problem deals with the validity of the WSDL. I am seeing that
the WSDL created has exceptions defined multiple times. I saw a
message from Manjo saying that it looked like a bug. I agree and
would like to get a copy of the patch. On a more significant note,
when is either SP2 or 7.1 due for release?
Another problem with the WSDL (once you have cleansed the multiple
exception messages) is that the fault elements of the
binding/operation elements require names and they don't have any. For
example, this is straight from the deployed EJB WSDL file:
<binding name="ExampleAgentPortSoapBinding" type="tns:ExampleAgentPort">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="serviceWithPrimitiveDatatypes">
<soap:operation soapAction="" style="rpc"/>
<input>
<soap:body use="encoded" namespace="http://sillyurl.com/reallysilly"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
<output>
<soap:body use="encoded" namespace="http://sillyurl.com/reallysilly"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
<fault>
<soap:body use="encoded" namespace="http://sillyurl.com/reallysilly"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</fault>
</operation>
<operation ...
The schema definition at http://schemas.xmlsoap.org/wsdl/ says the
fault element require a name attribute:
<complexType name =" tBindingOperationFault">
<complexContent>
<extension base="wsdl:tExtensibleDocumented">
<attribute name="name" type="NCName" use="required"/>
</extension>
</complexContent>
</complexType>
The name of the fault should be the same name as the fault in the
portType definition. In my example the name is "AgentisException" as
evidenced by this snippet:
<portType name="ExampleAgentPort">
<operation name="serviceWithPrimitiveDatatypes">
<input message="tns:serviceWithPrimitiveDatatypes"/>
<output message="tns:serviceWithPrimitiveDatatypesResponse"/>
<fault name="AgentisException" message="tns:AgentisException"/>
</operation>
Once these changes have been made then the WSDL will validate. Are
there plans to fix these bugs?
On a different note, when I try to interact with a method that uses a
custom data type, such as AgentKey, via the "WebLogic Webservice
standard testing home page" the custom data type without a default
constructor cannot be rendered correctly. For instance, the AgentKey
value is:

<agentKey/>
Since I can't deploy a valid WSDL, I can't get either Axis or Excel to
connect to my web services.
When I attempt to invoke Axis' (beta 1.1) wsdl2java I recieve the
following message.
java.io.IOException: ERROR: Fault is missing a name= attribute in operation
"serviceWithPrimitiveDatatypes", in binding {http://sillyurl.com/reallysilly}ExampleAgentPortSoapBinding.
This seems understandable considering the issues I mentioned earlier.
Unfortunately Excel doesn't really give me anything to go with. If I
type in the WSDL URI then it will give me a list of methods I can
invoke, but if I try to add the service I get the very unhelpful "The
Web Service References Tool could not generate the requested code.
Any changes that were made to your project have been rolled back."
Any help with those two issues would be greatly appreciated also.
One final issue is that I cannot seem to fix is taskdef'ing
<servicegen> properly from Ant. I can do the actual taskdef but then
it cannot find classes from within the weblogic.jar. If I run the
setExamplesEnv.cmd first the I don't need to do the taskdef and
everything works fine. Has anyone else had this issue? (we can't run
that command on our clients desktops before we build our build scripts
- anyway, I've put it down to one of those weird Ant classpath
issues.)
In summary:
Problems I can see and would like some help on are:
- multiple exception messages
- fault operations with no name
- the ability to generate client code with complex data types before
the EAR is deployed.
Could the product team add
- a clean way to add in schema datatypes without having to manually
hack the web-services.xml file.
I know this has been quite a long email, but it has been months in the
making. Anyone's time would be greatly appreciated.
Mark Mansour
Agentis Software
[email protected]

Hi Mark,
From your base post:
My next problem deals with the validity of the WSDL. I am seeing that
the WSDL created has exceptions defined multiple times. I saw a
message from Manjo saying that it looked like a bug. I agree and
would like to get a copy of the patch. On a more significant note,
when is either SP2 or 7.1 due for release?I would recommend starting here with support since getting valid WSDL seems to be the root of most of
your issues.
Concerning the upcoming release, I believe it is scheduled for late this quarter; contact Michael
([email protected]) for more information.
Also, at the bottom of this post:
I would just like to see an automated way to do this (I've had to write my own
utility to do this for me :(Does the autotype ant task help in this situation? Have you taken a look at this?
http://e-docs.bea.com/wls/docs70/webserv/anttasks.html#1080062
Thanks,
Bruce
Mark Mansour wrote:
Hiya Bruce,
I will try and get some time to follow this up with the support people too.
In response:
Problems I can see and would like some help on are:
- multiple exception messages
In your client code, you can set the following property to avoid the exceptionmessages so that the typemapping
registry can be setup.
//dont parse wsdl till we set the typemapping
System.setProperty( "weblogic.webservice.servicenamechecking","false" );
This is not a client issue. The WSDL is generating incorrect WSDL. Here is a
little snippet :
<message name="AgentisException" >
<part name="AgentisException" xmlns:partns="http://www.w3.org/2001/XMLSchema"
type="partns:string" />
</message>
<message name="setTraceLevel" >
<part name="agentKey" xmlns:partns="java:net.agentis.apml.runtime" type="partns:AgentKey"
/>
<part name="intVal" xmlns:partns="http://www.w3.org/2001/XMLSchema" type="partns:int"
/>
</message>
<message name="AgentisException" >
<part name="AgentisException" xmlns:partns="http://www.w3.org/2001/XMLSchema"
type="partns:string" />
</message>
As you can see the AgentisException is defined twice (in my real WSDL it is redefined
every time a method has the AgentisException in its interface (which in my case
is 5 times))
- fault operations with no nameI believe the fault issues that you have raised have been addressed in the upcomingrelease that will be
available for beta testing shortly. Contact [email protected] if you
want to participate in the beta.
great. Is there any ETA on the final release date?
- the ability to generate client code with complex data types before
the EAR is deployed.
There is an example to show how to do this: http://dev2dev.bea.com/direct/webservice/dyncmplx.zip
Unfortunately this doesn't solve my problem. I still don't have an EAR or WSDL
file from which I can generate a client to be included in the final EAR file that
gets deployed to the server. My original post explains this a bit better.
Could the product team add
- a clean way to add in schema datatypes without having to manually
hack the web-services.xml file.
Take a look at http://dev2dev.bea.com/direct/webservice/wswa.html#qz50 and others
in this area.
This was more in reference to the building of the web services in the first place
rather than registering custom datatypes at runtime. The manual procedure is
documented at http://edocs.bea.com/wls/docs70/webserv/customdata.html#1058102,
I would just like to see an automated way to do this (I've had to write my own
utility to do this for me :(
Hope this helps,
Bruce
Thanks Bruce.
Mark

Fault element name issues

Back in January I noticed a post concerning generated WSDL files and fault
element not containing a required attribute "name".
I seem to be having the same problem in WLS8.1
Can this be possible since it was fixed in version 7SP2?
After I generate the web service, when I try to generate a JAXRPC client
(via the JavaSoft web services toolkit), it complains that the WSDL file is
invalid because there are <FAULT> elements without name attributes.
Also, I'm having a problem using the clientgen Ant task, its having an error
generating types. This worked 2 days ago when I was running 8.1beta, but
since I upgraded to 8.1 it no longer works.
M
"Bruce Stephens" <[email protected]> wrote in message
news:[email protected]...
Hi Mark,
From your base post:
My next problem deals with the validity of the WSDL. I am seeing that
the WSDL created has exceptions defined multiple times. I saw a
message from Manjo saying that it looked like a bug. I agree and
would like to get a copy of the patch. On a more significant note,
when is either SP2 or 7.1 due for release?I would recommend starting here with support since getting valid WSDLseems to be the root of most of
your issues.
Concerning the upcoming release, I believe it is scheduled for late thisquarter; contact Michael
([email protected]) for more information.
Also, at the bottom of this post:
I would just like to see an automated way to do this (I've had to write
my own
utility to do this for me :(Does the autotype ant task help in this situation? Have you taken a lookat this?
http://e-docs.bea.com/wls/docs70/webserv/anttasks.html#1080062
Thanks,
Bruce
Mark Mansour wrote:
Hiya Bruce,
I will try and get some time to follow this up with the support people
too.
>>
In response:
Problems I can see and would like some help on are:
- multiple exception messages
In your client code, you can set the following property to avoid the
exception
messages so that the typemapping
registry can be setup.
//dont parse wsdl till we set the typemapping
System.setProperty(
"weblogic.webservice.servicenamechecking","false" );
>>>
>>
This is not a client issue. The WSDL is generating incorrect WSDL.Here is a
little snippet :
<message name="AgentisException" >
<part name="AgentisException"xmlns:partns="http://www.w3.org/2001/XMLSchema"
type="partns:string" />
</message>
<message name="setTraceLevel" >
<part name="agentKey"xmlns:partns="java:net.agentis.apml.runtime" type="partns:AgentKey"
/>
<part name="intVal"xmlns:partns="http://www.w3.org/2001/XMLSchema" type="partns:int"
/>
</message>
<message name="AgentisException" >
<part name="AgentisException"xmlns:partns="http://www.w3.org/2001/XMLSchema"
type="partns:string" />
</message>
As you can see the AgentisException is defined twice (in my real WSDL itis redefined
every time a method has the AgentisException in its interface (which inmy case
is 5 times))
- fault operations with no nameI believe the fault issues that you have raised have been addressed in
the upcoming
release that will be
available for beta testing shortly. Contact [email protected]
if you
want to participate in the beta.
great. Is there any ETA on the final release date?
- the ability to generate client code with complex data types before
the EAR is deployed.There is an example to show how to do this:
http://dev2dev.bea.com/direct/webservice/dyncmplx.zip
>>
Unfortunately this doesn't solve my problem. I still don't have an EARor WSDL
file from which I can generate a client to be included in the final EARfile that
gets deployed to the server. My original post explains this a bitbetter.
>>
Could the product team add
- a clean way to add in schema datatypes without having to manually
hack the web-services.xml file.
Take a look at http://dev2dev.bea.com/direct/webservice/wswa.html#qz50
and others
in this area.
This was more in reference to the building of the web services in thefirst place
rather than registering custom datatypes at runtime. The manualprocedure is
documented athttp://edocs.bea.com/wls/docs70/webserv/customdata.html#1058102,
I would just like to see an automated way to do this (I've had to writemy own
utility to do this for me :(
Hope this helps,
Bruce
Thanks Bruce.
Mark

Please try 8.1 sp1, it is strictly wsdl spec complaint. It generates
<fault> with name.. Clientgen requires fault name to correctly parse wsdl.
thanks,
-Neal
"Mark Fine" <[email protected]> wrote in message
news:[email protected]...
Back in January I noticed a post concerning generated WSDL files and fault
element not containing a required attribute "name".
I seem to be having the same problem in WLS8.1
Can this be possible since it was fixed in version 7SP2?
After I generate the web service, when I try to generate a JAXRPC client
(via the JavaSoft web services toolkit), it complains that the WSDL fileis
invalid because there are <FAULT> elements without name attributes.
Also, I'm having a problem using the clientgen Ant task, its having anerror
generating types. This worked 2 days ago when I was running 8.1beta, but
since I upgraded to 8.1 it no longer works.
M
"Bruce Stephens" <[email protected]> wrote in message
news:[email protected]...
Hi Mark,
From your base post:
My next problem deals with the validity of the WSDL. I am seeing that
the WSDL created has exceptions defined multiple times. I saw a
message from Manjo saying that it looked like a bug. I agree and
would like to get a copy of the patch. On a more significant note,
when is either SP2 or 7.1 due for release?I would recommend starting here with support since getting valid WSDLseems to be the root of most of
your issues.
Concerning the upcoming release, I believe it is scheduled for late thisquarter; contact Michael
([email protected]) for more information.
Also, at the bottom of this post:
I would just like to see an automated way to do this (I've had to write
my own
utility to do this for me :(Does the autotype ant task help in this situation? Have you taken a
look
at this?
http://e-docs.bea.com/wls/docs70/webserv/anttasks.html#1080062
Thanks,
Bruce
Mark Mansour wrote:
Hiya Bruce,
I will try and get some time to follow this up with the support people
too.
In response:
Problems I can see and would like some help on are:
- multiple exception messages
In your client code, you can set the following property to avoid the
exception
messages so that the typemapping
registry can be setup.
//dont parse wsdl till we set the typemapping
System.setProperty(
"weblogic.webservice.servicenamechecking","false" );
>
This is not a client issue. The WSDL is generating incorrect WSDL.Here is a
little snippet :
<message name="AgentisException" >
<part name="AgentisException"
xmlns:partns="http://www.w3.org/2001/XMLSchema"
type="partns:string" />
</message>
<message name="setTraceLevel" >
<part name="agentKey"xmlns:partns="java:net.agentis.apml.runtime" type="partns:AgentKey"
/>
<part name="intVal"
xmlns:partns="http://www.w3.org/2001/XMLSchema" type="partns:int"
/>
</message>
<message name="AgentisException" >
<part name="AgentisException"
xmlns:partns="http://www.w3.org/2001/XMLSchema"
type="partns:string" />
</message>
As you can see the AgentisException is defined twice (in my real WSDL
it
is redefined
every time a method has the AgentisException in its interface (which
in
my case
is 5 times))
- fault operations with no nameI believe the fault issues that you have raised have been addressed
in
the upcoming
release that will be
available for beta testing shortly. Contact [email protected]
if you
want to participate in the beta.
great. Is there any ETA on the final release date?
- the ability to generate client code with complex data types
before
the EAR is deployed.There is an example to show how to do this:
http://dev2dev.bea.com/direct/webservice/dyncmplx.zip
Unfortunately this doesn't solve my problem. I still don't have an
EAR
or WSDL
file from which I can generate a client to be included in the final
EAR
file that
gets deployed to the server. My original post explains this a bitbetter.
Could the product team add
- a clean way to add in schema datatypes without having to manually
hack the web-services.xml file.Take a look at
http://dev2dev.bea.com/direct/webservice/wswa.html#qz50
and others
in this area.
This was more in reference to the building of the web services in thefirst place
rather than registering custom datatypes at runtime. The manualprocedure is
documented at
http://edocs.bea.com/wls/docs70/webserv/customdata.html#1058102,
I would just like to see an automated way to do this (I've had to
write
my own
utility to do this for me :(
Hope this helps,
Bruce
Thanks Bruce.
Mark

How does Photoshop Elements set the histogram pixel count (Y value)?

I use histograms a lot to evaluate the quality of an image. But I've noticed that some histograms have "flat peaks". I don't think that indicates real clipping is taking place, but it does raise the question as to what the maximum count is set to. I can find nothing that discusses this issue.

Hallo,
vielen Dank für die kurze Antwort. Eigentlich schade, für so ein mächtiges Programm...
Was also tun, zurück zum Mitbewerber...?
Nein, erst mal die harte Tour versuchen.
Win 8.1, Notepad mit Administratorrechten.
C:\Program Files (x86)\Adobe\Elements 12 Organizer\Assets\locale\de_DE\fontmap.txt
geöffnet.
Originalinhalt auf meinem System:
Myriad Web Pro
9
12
Myriad Web Pro
7
10
Angepasst in
Myriad Web Pro
15
18
Myriad Web Pro
13
16
und schon sind die Schriften im Organizer größer... ;-)
Allerdings fehlen jetzt auch Teile des Texts auf diversen Schaltflächen :-(
Muss man also noch ein wenig optimieren.
Achtung Nachahmer: Ich übernehme keine Verantwortung für eure Änderungen an euren Systemen und mögliche Fehler.
Grüße
JPFe

Element Set Issue ..

Similar Messages

Maybe you are looking for