Element VS attribute in IR when we create data type.

hi guruz,
when we make data type in IR ,and while creating node ,according node we give type(Element ,attribue etc).
what is diff between element and attribute.
please help me
warm regards.

Hi,
You create complex data types using elements and attributes in the XSD editor
Element
Create structured data types. Elements that have a type cannot contain subelements.
Example Instance
<myElem>
<f1> Value of f1 </f1>
<f2> Value of f2 </f2>
</myElem>
Attribute
Add attributes to elements. Attributes cannot usually have subnodes.
Example Instance
<myElem myAttr="AttributeValue">
Element Value
</myElem>
You can flag an attribute as optional or required in the Occurrence column. These values mean the same for elements with an occurrence of 0..1 or 1. The only difference between elements and attributes is that attributes cannot have subnodes and that the same attribute cannot be used more than once in an element.
Hope this will clarify you.
Regards
Aashish Sinha
PS : reward points if helpful

Similar Messages

Why need message type when u create data type...

why need message type when u create data type...

Hi,
A message type comprises a data type that describes the structure of a message. At the following points in SAP Exchange Infrastructure you can refer to the message to be exchanged at runtime by using the message type:
· More than one message interface can use the same message type. For example, an asynchronous outbound message interface and an asynchronous inbound message interface can reference the same message type because the request message does not need to be mapped.
· When defining a message mapping you can directly reference message types to map messages from an outbound interface to messages from a receiver interface.
For technical reasons, a data type is not sufficient to describe the instance of a message. In XML schema, data types are defined as abstract types that are not yet fixed to an element. You can only describe an instance of a message when you have specified a data type as an element type. Therefore, a message type defines the root element of a message.
A message type does not define the direction of the message exchange, in other words, whether it is a request or a response. In exceptional cases you can use the same message type for both the request and the response message.
A message type has the following characteristics:
· It comprises exactly one data type, which determines the content of the message to be transferred.
· It is identified by a name and an XML namespace. The name (together with the namespace) of a message type is located in the uppermost tag of the message to be exchanged. This is an element tag.
You have defined a message type GreetingRes that references a simple data type of type xsd:string. The XML namespace of the message type is http://sap.com/xi/myExample. The corresponding payload might look like this:
<?xml version="1.0" encoding="utf-8" ?>
<ns1:GreetingRes xmlns:ns1="http://sap.com/xi/myExample"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 Hello Mrs. Miller
</ns1:GreetingRes>
You can specify how a message type is used in more detail in the description
hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

Validation while create data type

HI All ,
I have a pop-up in my report that user can create data type in didc,
There is a simple way to support validation for data types ,
I have pop-up where the user need to provide name of attribute
he need to create and the data type for it (char ,string ,int etc )
and he also need to provide the leng of the attribute he want to create
(e.g. char10 ) and also decimal places .
the issue here that i need to do some validation in the pop-up
for e.g. if user choose
case 1
name     - attribute1
datatype - string
leng   - in this case he dont need to provide leng (string )
dec - dont need to provide (string )
case 2
name     - attribute1
datatype - char
leng   - 10
dec - dont need to provide (char )
Any idea how to do this validation in a simple way (maybe to use standard functionlity)
Regards
Alex

HI Keshav.
What i did is created a popup with FM in the popup i have 4 field
the field with the data type which i want to trigger event to it is domain and not ref to FM
The ppoup have 4 field
attr name
datatype
length
decimal
so from what you are say there is not option to trigger event when the user press F4
and choose a entry from it ,
since what i want to do is that if user for instance chose string i want that the next to fields (length and dec ) will be
remove from the popup since he dont need them .
and for he choose char the the decimal field will remove from the popup
Any idea how to solve this issue ?
Regards
Alex
Edited by: Alex Dean on Oct 12, 2010 3:02 PM

Import XSD to create Data type in Design

hi,
I know that we can import XSD in Design and create data type,my question is:
1. Can i import an XSD thats been created in message mapping and use that to create my data type in design.
(or)
2.Should i have to write an XSD on my own and then import it to create my data type, and is there any standard format to write it.

Hello Prashanth,
For your first question: i don't know exactly what you mean that the the xsd you create in the data mapping steps. So can you explain it in details?
For your 2nd question: Sure you can write your own XSD to create a data type. And i will give you an example xsd file format. Then you can import it in the XSD tab view.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/hansteel" targetNamespace="http://sap.com/xi/XI/hansteel">
 <xsd:complexType name="CustomerInfo">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 a6c26c80000f11dac45e00096b1669b3
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:sequence>
 <xsd:element name="ID">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 dfe699c0e7bc11d9c736d51c0a0013e1
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:length value="10" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="NAME">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 dfe82060e7bc11d9b2efd51c0a0013e1
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:length value="35" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="CUSTTYPE">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 dfe82061e7bc11d9c193d51c0a0013e1
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:length value="4" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="POSTCODE">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 e93039a0e7bc11d9c7c6d51c0a0013e1
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:length value="10" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="CITY">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 f0122850e7bc11d99189d51c0a0013e1
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:length value="35" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
</xsd:schema>
Hope this will be helpful.
Eric Ma

Create Data Type from XSD

Hey guys
i need to create Data Type from and XSD,in the beginning i had an XML document which i converted to XSD using Altova ,then i imported this XSD in IR under External definition,now how should i go ahead with creating Data Type?
my sample XSD is something like this
<?xml version="1.0" encoding="UTF-8"?>
<!W3C Schema generated by XMLSpy v2007 sp2 (http://www.altova.com)>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
 <xs:element name="WorkOrderNumber">
 <xs:simpleType>
 <xs:restriction base="xs:short">
 <xs:enumeration value="10942"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="VendorNumber">
 <xs:simpleType>
 <xs:restriction base="xs:int">
 <xs:enumeration value="109845"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
Its not the complete XSD,just the first few lines.
thanx
Ahmad

Hey Prabhu
my XSD looks like this
<?xml version="1.0" encoding="UTF-8"?>
<!W3C Schema generated by XMLSpy v2007 sp2 (http://www.altova.com)>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
 <xs:element name="WorkOrderNumber">
 <xs:simpleType>
 <xs:restriction base="xs:short">
 <xs:enumeration value="10942"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="VendorNumber">
 <xs:simpleType>
 <xs:restriction base="xs:int">
 <xs:enumeration value="109845"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="UnitPrice">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="MonetaryAmount"/>
 <xs:element ref="UnitOfMeasureCode"/>
 <xs:element ref="CurrencyCode"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="UnitOfMeasureCode">
 <xs:simpleType>
 <xs:restriction base="xs:string">
 <xs:enumeration value="EA"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="TotalLineItems">
 <xs:simpleType>
 <xs:restriction base="xs:byte">
 <xs:enumeration value="6"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="TaxTypeCode">
 <xs:simpleType>
 <xs:restriction base="xs:string">
 <xs:enumeration value="GoodsAndServicesTax"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="TaxReference">
 <xs:simpleType>
 <xs:restriction base="xs:string">
 <xs:enumeration value="GST"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="TaxAmount">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="MonetaryAmount"/>
 <xs:element ref="CurrencyCode"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="Tax">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="TaxTypeCode"/>
 <xs:element ref="TaxAmount"/>
 <xs:element ref="TaxReference"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="Requisition">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="Number"/>
 <xs:element ref="LineItemNumber"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="Quantity">
 <xs:simpleType>
 <xs:restriction base="xs:decimal">
 <xs:enumeration value="1.0"/>
 <xs:enumeration value="2.0"/>
 <xs:enumeration value="6.0"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="PrimaryCurrency">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="CurrencyCode"/>
 <xs:element ref="ExchangeRate"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="Pricing">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="UnitPrice"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="PaymentTerms">
 <xs:simpleType>
 <xs:restriction base="xs:string">
 <xs:enumeration value="NT30"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="Number">
 <xs:simpleType>
 <xs:restriction base="xs:string">
 <xs:enumeration value="Q173849"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="MonetaryAmount">
 <xs:simpleType>
 <xs:restriction base="xs:decimal">
 <xs:enumeration value="1.98"/>
 <xs:enumeration value="12.48"/>
 <xs:enumeration value="12.63"/>
 <xs:enumeration value="16.75"/>
 <xs:enumeration value="24.96"/>
 <xs:enumeration value="240.0"/>
 <xs:enumeration value="33.84"/>
 <xs:enumeration value="43.83"/>
 <xs:enumeration value="5.64"/>
 <xs:enumeration value="74.81"/>
 <xs:enumeration value="87.66"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="LineItemTotal">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="MonetaryAmount"/>
 <xs:element ref="CurrencyCode"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="LineItemNumber">
 <xs:simpleType>
 <xs:restriction base="xs:byte">
 <xs:enumeration value="10"/>
 <xs:enumeration value="20"/>
 <xs:enumeration value="30"/>
 <xs:enumeration value="40"/>
 <xs:enumeration value="50"/>
 <xs:enumeration value="60"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="LineItemMaterialNumber">
 <xs:simpleType>
 <xs:restriction base="xs:string">
 <xs:enumeration value="108739"/>
 <xs:enumeration value="192740-A"/>
 <xs:enumeration value="380495"/>
 <xs:enumeration value="43998"/>
 <xs:enumeration value="54727S"/>
 <xs:enumeration value="5746"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="LineItemInformation">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="LineItemMaterialNumber"/>
 <xs:element ref="LineItemDescription"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="LineItemDescription">
 <xs:simpleType>
 <xs:restriction base="xs:string">
 <xs:enumeration value="ABSRBT PAD 17 IN X 19 IN X 3/8 IN UNIV P"/>
 <xs:enumeration value="BSHG HEX 1 IN X 1/2 IN THD FS A105N"/>
 <xs:enumeration value="GGE 4 IN 1M / 7000 DL SCALE 1/2 IN LM WI"/>
 <xs:enumeration value="PEN REC RD MED GRAPHIC 39-202"/>
 <xs:enumeration value="PL ORF 3 IN .5 IN ORF SER 500 316 SS"/>
 <xs:enumeration value="WPR F-200 FLC NOV LABEL 20"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="Invoices">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="Invoice"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="InvoiceTypeCode">
 <xs:simpleType>
 <xs:restriction base="xs:string">
 <xs:enumeration value="ProductOrService"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="InvoiceTotal">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="MonetaryAmount"/>
 <xs:element ref="CurrencyCode"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="InvoiceSummary">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="TotalLineItems"/>
 <xs:element ref="InvoiceTotal"/>
 <xs:element ref="Tax"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="InvoiceQuantity">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="Quantity"/>
 <xs:element ref="UnitOfMeasureCode"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="InvoiceProperties">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="InvoiceNumber"/>
 <xs:element ref="InvoiceDate"/>
 <xs:element ref="VendorNumber"/>
 <xs:element ref="InvoiceTypeCode"/>
 <xs:element ref="PrimaryCurrency"/>
 <xs:element ref="PaymentTerms"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="InvoiceNumber">
 <xs:simpleType>
 <xs:restriction base="xs:int">
 <xs:enumeration value="98815236"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="InvoiceLineItem">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="WorkOrderNumber"/>
 <xs:element ref="LineItemNumber"/>
 <xs:element ref="InvoiceQuantity"/>
 <xs:element ref="LineItemInformation"/>
 <xs:element ref="Pricing"/>
 <xs:element ref="LineItemTotal"/>
 <xs:element ref="Requisition"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="InvoiceDetails">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="InvoiceLineItem" maxOccurs="unbounded"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="InvoiceDate">
 <xs:simpleType>
 <xs:restriction base="xs:date">
 <xs:enumeration value="2007-01-25"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
 <xs:element name="Invoice">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="InvoiceProperties"/>
 <xs:element ref="InvoiceDetails"/>
 <xs:element ref="InvoiceSummary"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="ExchangeRate">
 <xs:complexType/>
 </xs:element>
 <xs:element name="CurrencyCode">
 <xs:simpleType>
 <xs:restriction base="xs:string">
 <xs:enumeration value="CAD"/>
 </xs:restriction>
 </xs:simpleType>
 </xs:element>
</xs:schema>
can you please tell me how to nest the structures,i m fairly new to XSD and stuffs
thanx
ahmad

Creating data types

Hi
How do u create a data type when u get an input file.
How do u know when to create header , footer n all?
Can some one tell me or send a url on how to create data types. would be of great help!
Thanks!

HI,
Generally identifying the structure from the input file need some analysis work.
You may refer some of the below tips while creating the data types
1. List down the input structure of data fields from input file.
2. Decide the Header and detail information based on the data and go for sub-structure.
3. With File adapter try to maintain the structure level max. upto 2.
i.e. Root>Header>Fields etc.
4. Try to avoid the substructure for the internal fields.
5. Decide the Occurances fo every root and sub structures and fields.
6. Identify if there any relations within Header and detail fields.etc.
Check with SAP Help for various activities
http://help.sap.com/saphelp_nw04/helpdata/en/a5/04623c4f69b712e10000000a114084/content.htm
Thanks
Swarup

Error while creating data type

Hi
I am creating data type for the scenario from File to IDOC
Namespace urn:xiworkshop:groupxx:legacy is not defined in the software component version NEWPRODUCT , 100 of sap Object Message Type Vendor | urn:xiworkshop:groupxx:legacy references the inactive object Data Type Vendor | urn:xiworkshop:groupxx:legacy
Please help me

Hi;
First activate your namespace and then create the data type.
Namespace + default datatypes should be activated together.
Then your data type
Mudit

Why should we create data type

Hi all,
I have a basic question!
why do we create data type and then wrap it as message type?
why dont we directly create a message type and use that ?
please give the answers. Thanks in Advance.

Hi Seshu,
Please go through below links, you get answer
message type and datatype
Difference between Data type and Message type - Process Integration - SCN Wiki
Regards,
Krupa

Problem in creating data type

hi..
i've problem in creating data type in xi after importing idoc from the R/3 sender
plz tell me the basic steps for creating data type in the receiver i.e xi.....
thanks in advance

Hi,
You don't need to create a data type after importing the IDOC.
Idoc itself acts as message type and message interface.
check this for creating a data type..
http://help.sap.com/saphelp_nw70/helpdata/en/2d/c0633c3a892251e10000000a114084/frameset.htm
Thanks,
Vijaya.

How create data type for coulmn name having special characters in IR

hi ,
any idea how to create how to do create data type for coulmn name having special characters

Hi Amit,
Can you ellaborate ?
Actually if you are reading a file(or anything else) which contains special characters, the data type can be created as done for other interfaces. But it is in the adapters that we actually take care of handling these special characters.
ShabZ

Create data type string

HI
There is a way to create date type string using the command
Create data type "string"...
I know that I can create data type C but string dont have any restrication so how I can hanlde it ?
Regards
Joy

Hi,
You can use the create data statement:
DATA: lo_data TYPE REF TO data.
FIELD-SYMBOLS: <str> TYPE ANY.
CREATE DATA lo_data TYPE string.
ASSIGN lo_data->* TO <str>.
Here <str> will be of type string.
Kr,
m.

Db hangs when we create a type

hi,
1. In db i have a type created with:
CREATE OR REPLACE TYPE type_parent AS OBJECT (
f_parent_name VARCHAR2 (100)
NOT FINAL;
2. There are many objects (type_child1, type_child2...) which extend this type
3. There is a Queue defined in the db with type: type_parent and its started
4. When i create a new type as:
CREATE OR REPLACE TYPE type_child under type_parent(
f_child_name VARCHAR2 (60),
The db hangs for indefinite time.
We tried stopping the queue still the same is the issue.
When we restart the db the new type is being created fine.
Any idea what could have gone wrong? any ideas / pointers would be appreciated.
regards,
ravi

Hi,
As you stated the DB hangs, AFAIK, try to stop the queuing the Parent type for while, since the type is inuse with respect to the Queue (with respect to Table which dependent on that). Until that Sessions which using the Queue is not Cleared it would would hang. Since there would be Enqueue created on the Object. So, when you restart the DB or instance the Enqueue will get cleared and new child type is created with out any Issue. That might be internally happening (I doubt it). Try to Check that
Further Reference : http://www.akadia.com/services/ora_advanced_queueing.html
- Pavan Kumar N

How to give the length , cardinality and format when creatin a data type?

Hi,
I am new to XI and i wish to know how to give the cardinality ,format and length when creating a data type .Also please let me know how to give the following?
cardinality --repeating and required
non repeating , optional
thanks and regards

When you are defining the elements of the datatype there are columns where you can do what you need:
column type: here you choose the type of data of the element
it can be a standard type or a user defined one (if you click one time only it should appear an icon in the right for input help: click there and choose the type you need)
column occurence : in a similar way of column type here you define the cardinality of the element (min occurence and max occurence)
setting min occurrence: 1, max occurrence 1 or unbounded --> required
mmin occurrence 0, max occurrence 0, 1 or unbounded --> optional
about the attributes there are directly the choice between required or optional.
 column details : here you define the length of the element if it is a string or a lot of other things if the type is a different one.
I hope this will help you

NWBC:CREATE DATA:Type WDR_APP_PROP_DISP_LOADINGPAGE is no valid data type

HI Experts,
We want to access our servers through NWBC. All setting and configuration related is done also services in SICF are activated.But when we are in to NWBC it shows following error. Kindly help to resolve this
Error when processing your request
What has happened?
The URL https://hpi-dev.domainname.local:44301/sap/bc/webdynpro/sap/powl was not called due to an error.
Note
The following error text was processed in the system ERD : CREATE DATA: The specified type WDR_APP_PROP_DISP_LOADINGPAGE is no valid data type.
The error occurred on the application server HPI-DEV_ERD_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONVERT_XML_TO_STRING of program CL_WDR_CONFIGURATION_UTILS====CP
Method: CONVERT_XML_TO_STRING of program CL_WDR_CONFIG_APPL_PARAM======CP
Method: READ_DATA of program CL_WDR_CONFIG_APPL_PARAM======CP
Method: INIT_DATA of program CL_WDR_CONFIG_APPL_PARAM======CP
Method: GET_DATA of program CL_WDR_CONFIG_APPL_PARAM======CP
Method: CONSTRUCTOR of program SAPLWDR_RUNTIME_REPOSITORY
Function: WDR_GET_REPOSITORY of program SAPLWDR_RUNTIME_REPOSITORY
Method: IF_WDR_RUNTIME~GET_RR_APPLICATION of program CL_WDR_MAIN_TASK==============CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system ERD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server HPI-DEV_ERD_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server HPI-DEV_ERD_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-https -c: 100 -u: SRAUT -l: E -s: ERD -i: HPI-DEV_ERD_01 -w: 0 -d: 20111220 -t: 003857 -v: RABAX_STATE -e: CREATE_DATA_UNKNOWN_TYPE
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi,
Regarding the issue reported by you kinly refer in detail the solution section of the following SAP Note:
1432358 - Starting application with Loading Animation
It seems that the data element WDR_APP_PROP_DISP_LOADINGPAGE is not created in your system.
This note should help you out.
Regards,
Abhishek

How to do create data type for coulmn name as QS$FGD .

hi ,
In my database i have a column as QS$FGD.
How do i map it in XI , since $ is not accepted when u create a data type.
One way is to give alias at the databse level for the column . is there any other way to slove it .
Thanks
amit

Hi Amit,
Were you able to solve your issue? I'm facing the similar issue now. My DB table contains field names with '.' i.e. say xyz.abc. How to solve this??
I feel SP could be an alternative??
Thanks,
Hussain.

Element VS attribute in IR when we create data type.

Similar Messages

Maybe you are looking for