Elementary Question about default settings

Is there any way to turn of "frame blend" and the linking between audio and video by default?  It's so annoying to have to uncheck those options everytime.  Thank you so much!

Nope, no toggles for these. But:
Frame Blend has no effect if your clips do not have any speed changes applied, or if they're used in a sequence that matches their frame rate, so no need to turn it off. You can turn Frame Blend off on multiple clips, however. If they're not in use in your sequence, select them all (or just select the bin that contains them) in the Project panel, and select Clip > Video Options > Frame Blend. If the clips are in use in a sequence, lasso or otherwise select all the clips, and either right-click and deselect Frame Blend, or use Clip > Video Options > Frame Blend.
Hold down the Alt key as you select the video or audio portion of a clip in a sequence, and you'll temporarily "break" the link. If you move the selected portion of the clip, the link will be broken permanently. Otherwise, use the "Drag Video Only" and then the "Drag Audio Only" icons in the Source monitor to put both into sequence, but be unlinked.

Similar Messages

  • Getting Started with CFBuilder - A Question About Project Settings

    Hello All,
    I'm just getting my feet wet with CFBuilder and giving it a spin after over a decade's worth of experience with Dreamweaver and I have a question about setting up my work environment.
    First of all, I have two computers that I mainly work from.  My home desktop computer, and a laptop for when I'm on the road.  I keep all of my web site project files syncronized between the two computers using Dropbox.
    I've noticed that when I create a new project in CFBuilder it stores a few files in my project root like ".project" and "settings.xml".  It looks like "settings.xml" stores information about which CFBuilder web server should be used for the project.  Unfortunately this messes things up for me a bit because on my desktop a web site project url might be:  http://desktop/myProject/ and on my laptop the project url could be http://laptop/myProject.
    The reason this isn't a problem in Dreamweaver is because dreamwevaer stores its configuration/preferences outside of my project folders so I can essentially define any testing server I want for both the desktop and laptop.
    Is there a way to configure CFBuilder to store project settings outside of the project folder?  Or does anyone have a suggestion for someone like me who syncronizes their project files from their laptop to their desktop?
    Thanks in advance for helping out a CFBuilder noob.

    I would recommend using a distributed version control system (DVCS) with a hosted service, such as using Git/Mercurial and Github/BitBucket/UnFuddle.  With Git, you can use a .ignore file to specify files/folders that you want to exclude from being stored in version control (I also exclude my CFBuilder project files from my repositories).  You would then sync your local Git repositories with your service of choice, and they would be accessible from any machine. 
    There are many advantages of using Git and a hosted service over just Dropbox:
    Each computer has a complete copy of the code repository, including all code changes over the history of your project.
    You store code modifications in "commits", or small entries in the DVCS.
    Commits can contain user-defined descriptions that help you identify what you did at each step of your development process
    You can roll back commits if you break something in your code.
    You can create "branches" of your code when you want to work on a specific feature of your application, and that branch is kept in isolation from other branches until you are ready to merge it back into the main production code branch.
    You can have public or private hosted repositories on the various services, enabling you to work with a team or participate in open-source development.
    There are Eclipse plugins available for CFBuilder that provide GUI tools for working with Git and hosted repositories (unless you are comfortable with using the command-line to do all your Git interactions).
    I don't think you can separate the project settings from the project in CFBuilder.

  • Questions about default AP group

    Hi all,
    i am trying to understand whether it is possible to have newly provisioned AP's boot up with NO SSID's assigned to them by default.
    As i understand it, all APs & the first 16 SSIDs all join the default group.
    This is a pain as it means that we will have to have an AP properly physically installed before we are able to join it to a controller. We do not want AP's on our workbenches having live clients associated to them.
    Does anyone know if this is possible?
    thanks
    Mario                  

    No, you cannot change the WLAN ID without deleting & creating it again.
    If you are using default settings (ie broadcast SSID, WPA2/AES-802.1x, QoS profile-Silver, WMM-allow, CHd-enable,P2P-disabled) you can simply use following CLI context to do that (assuming WLAN ID 1 to be deleted & recreated as ID 17)
    config wlan delete 1
    config wlan create 17 ABC ABC
    config wlan interface 17
    config wlan enable 17
    If any other features configured for this WLAN then you need to enable them via GUI or CLI. Below post should help you to understand more CLI commands to do this.
    http://mrncciew.com/2013/05/16/wlan-config-via-cli-part-1/
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • A question about monitor settings and printing?

    I have a new PC with an HD monitor, it didn't come with an HDMI cable, but a VGA one, I recently got the HDMI and I noticed that comparatively when using the VGA cable & using the default monitor settings that the darks were darker than when using the HDMI with default settings, (the colour depth looked best with the VGA) I'm using PE9 and need to make an image to have printed at the printers, I would love to use the HDMI cable, but I'm concerned that if I do (and I change the monitors default settings for contrast, hue...etc to compensate) that... it will have been edited here one way and look totally different on the print shops monitor...
    ... So, how can I be sure it will come back from the printers looking the same as I had edited it?
    Should I give up with the HDMI cable? I also have PrE 9 for video editing, so I'm a bit confused at to what is best to do...
    Thanks.

    There are no free calibration tools.  Like most things you get what you pay for.  However, the low end versions are quite good, so take a look at the Xrite Huey.
    This will get your display calibrated which ensures you see the best rendering of the image on screen.  It does not guarantee good print matching since this also requires a print colour managed process and good viewing conditions.
    Colour settings in Elements are mis-leading.  They apply to new documents being created in Elements or to images being opened that don't contain a colour profile.  Virtually all JPEG images from cameras will have a profile tagged in them.  So choose any setting but not the one that says 'No Colour Management'.  The best default in my opinion is 'Optimise for Screen'
    Colin

  • Question about default wallpaper settings on new iPhone

    The default wallpaper for the iPhone 3GS is planet Earth. I was wondering if the option for "camera roll" (to use as wallpaper) is there by default...or is it added there after you take your first photo or only after you use a photo as wallpaper the first time.
    Strange question, I know.
    Thanks

    Page 142 of the user manual:
    Wallpaper
    You see a wallpaper background picture when you unlock iPhone. You can select one of the images that came with iPhone, or use a photo you’ve synced to iPhone from your computer.
    Set wallpaper: Choose Wallpaper and choose a picture.
    Settings>Wallpaper

  • Question about FCP settings

    I must have changed something in my settings accidentally because for some reason whenever I drag a clip into the timeline, the the audio is not linked together and I always have to highlight the tracks and link the selection. What can I do to make the audio tracks be linked together by default?
    By the way, im talking specifically about audio here--not about linking audio to video, but linking two audio tracks together.
    G5 Dual 2 GHZ   Mac OS X (10.4.2)  

    You need: Modify>Stereo Pair (option + L)
    Cheers
    x
    Do your part in supporting your fellow users. If this response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered when you get enough information to close the thread.

  • FCP X, a question about camera settings

    I live in the middle of the Pacific and need some advice as there is no one here to help me answer these kinds of questions...
    My first 3 big projects were done in SD using a SONY PD 170 and FCE4.
    I just bought the Panasonic HPX 170 with a 64 GB P2 card.  I use a new iMac i7 (OSX 10.7.2) with all the bells and whistles and have now gone to the new FCP X for software.  I know the following is more of a camera question more than a software question, but I thought someone in this forum might be able to help me.
    We are about to shoot another full length feature film (roughly 90 minutes).  I have read through the manual and a book about the camera but I'm just not getting enough information to make the ultimate decision as to what camera settings I should use to shoot the film.
    In the end I expect the film to show at a theater here on the islands for a few weeks, and then a few film festivals and then ultimately, hopefully, sell DVDs to people who do not have sophisticated plasma TV/DVD setups, so I have to consider this also when shooting the film. 
    So.... I would really, really, really appreciate some opinions as to how I should go about this, i.e., 24p?  30p? 720? 1080i?    If it were you, what settings on the camera would you use to shoot this film???
    Thanks so much in advance.

    1080i/60 is your best choice.
    (This is assuming there's not a great deal of fast action, or slow motion in the movie. If there is, you may want to consider 720p 60).
    You really need to research frame rates and the difference between interlaced and progressive footage before you commit yourself. To be honest, the difference between 720 and 1080 is so tiny, I doubt many people could tell it apart if they didn't already know which was which.
    Andy

  • A question about Performance Settings

             Dear all.
                           Hi all,I want add a performance poller about Environmental Temperature.
                            There is an error as shown in the figur:
                            The device is Nexus 7010.  Is it support  this poller ?
                              If support,how to setting ?
                             Thank you very much

    Peanuts
     Thank you for your time and help.
    Dumb question  Reflash the firm ware
    Means Install the new firm ware list on this web site
    my old is v3.0.02 build 003 june 4, 2009
    The new one is v3.0.02 build 4 12/10/09
     The MTU thing  Ican figure out. click save OK. But what the heck  is
    Power cycle the router
    Un-plug it ?
    Sorry to  a pain.  Ready to throw this out the window.  It works good/great then very poor or not at all. In wireless mode.
     The other day on the lap top  a  friend was connected to a inter-active training video. for about 30 minutes, worked great.
     Then today the Dell with windows 7 lost the wireless conection.
    Thanks

  • Usage question about Default Display Value based on calculation

    Hi,
    I read on page 3-70 of the devguide about using EL for Default Display Values.
    I want to something similar as the defaultSalaray based on some kind of calculation. There is stated to store the value on the request or session (request is fine for me).
    I'm only wondering how I can put some infromation like this on the request using JHS.
    Regards,
    Marcel

    Marcel,
    This requires custom code in a JhsDataAction subclass. For example, you can overwrite method handleLifeCycle, and before calling super you can add a request attribute:
    actionContext.getHttpServletRequest().setAttribute("defaultSal","23000");
    Alternatively, if you have a business service method that calculates the default salary, you could create a separate DataAction, drag and drop this method on the data action, and add a success forward to your data page action. In the DataAction you can configure the method result location (requestScope, sessionScope). This way, you do not need to write java code.
    Steven Davelaar,
    JHeadstart Team.

  • Simple beginner question about default tables (LOGMNR, etc.)

    Hi all, I just installed SQL Developer and the Express server. I have worked with other SQL databases and with remote Oracle databases. But never been a DBA for an Oracle DB. I tried searching on LOGMNR and AQ$_, but couldn't find anything, hence this question.
    If there is some online documentation that covers these particular tables and my question, then a pointer to that would be appreciated.
    Anyway, I created a connection per the instructions and it seemed to work. But when I look at tables listview, I see a whole slew of tables. I assume these are all housekeeping/meta data tables (eg. information_schema in MySQL). Is this correct?
    Also, short of manually creating a filter for each of the file types ("%$%"help", "LOGMNR%", "SQLPLUS%", etc.), is there an easy way to ignore these tables and just see the tables I want to create for testing purposes?
    And I am curios why these all show up by default. Could it be that I am expecting something because of experience with other databases and am actually doing things the "wrong" way? Or is this just because I am using the Express Server? Or is there another (very good) reason for these tables to exist?
    Thanks,
    justme

    The complete oracle documentation is at http://tahiti.oracle.com. There is a lot of it, but Log Miner and Advanced Queuing have their own manuals. You should also consider starting with the Concepts Manual followed by one of the "2-day" tutorials such as "2-Day DBA"
    What user are you connecting as? It sounds as if you are connecting as SYS or SYSTEM if you can see the dictionary tables.
    You should create a separate user to connect as.
    (create user myuser identified by mypassword;
    grant connect,resource to myuser;)

  • Question about video settings

    Hey, I have music videos and tv specials on my ipod and was putting them under the correct settings recently instead of them all being listed as movies. The tv specials were fine under movies, but the music videos are another story. While they do show up on the music video listing, they also show in my music listing- its really annoying because I expect the video and all I get is a preview shot of what is in the video and i do hear the music playing. My question is this due to me changing the equalizer settings in the info on these music videos to music videos and putting the artist name on or what?
    5th Gen 30 gb iPod,Dell 5100 Inspiron Laptop   Windows XP  

    Kristina, it might be worth checking to see if you're running afoul of this problem:
    Videos labeled TV Shows in iTunes don't appear on iPod
    (but i'm not sure that's it, given the symptoms you're describing.)
    there are some other possibilities that might be worth checking on here:
    iPod plays audio but not video of movies

  • Re: Satellite L350-170 - Question about webcam settings and microphone

    HI,
    I would like to know the webcam resolution of my laptop as it shows preety bad out put. Also where is the inbuilt mic locates? I would also like to know about screen brightness settings. How can I register my laptop? kindly help
    Since this is my secondhand computer, is there any software which can detect the settings and confirm everything? My product details are as below.
    Back to support homepage
    Switch models Satellite L350-170 Part Number : PSLD8E-00D008EN Key Features - Intel Pentium Dual-Core Processor
    - Genuine Windows Vista Home Premium Edition (pre-installed, Toshiba-HDD recovery)
    - DVD-RW SuperMulti drive (Double Layer)
    - 2048 MB (1024+ 1024) DDR RAM (800MHz)
    - 17" Widescreen TruBrite XGA (1440 x 900) High Brightness display
    please help.

    Hi shahchin,
    I think you should check this Toshiba document:
    [How to change the settings for the integrated webcam if the image is very dark or black |http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]
    Furthermore the microphone is located on near the microphone because its a part of the webcam.
    Regarding the picture quality of webcam you could also try reinstalling the webcam driver from Toshiba website.

  • Question about transferring settings between profiles

    I'm having a problem transferring settings between profiles. The following procedure replicates the problem:
    Launch Firefox with an existing profile and reconfigure the navigation toolbar so that the Stop and Reload buttons are separate.
    Using Profile Manager, create a new profile; DON'T launch Firefox.
    Copy file localstore.rdf from the old profile to the new profile.
    Launch Firefox with the new profile and observe that the Stop and Reload buttons in the navigation toolbar are in their default, combined configuration.
    Close Firefox and copy file localstore.rdf from the old profile to the new profile AGAIN.
    Relaunch Firefox with the new profile and observe that the Stop and Reload buttons in the navigation toolbar are separate.
    The same thing happens with bookmarks menu tweaks and file places.sqlite (I'm referring to tweaks to the menu itself, not the bookmarks).
    It seems that Firefox doesn't honor some of the settings in localstore.rdf and places.sqlite the first time it is run with a new profile. Running Firefox the first time over-writes the custom settings, requiring that the files be copied a second time. Then it works as expected.
    I stumbled across this while trying to pre-install Firefox v9.0.1 and my custom settings on several systems running Windows XP.
    Does anyone know a work-around?

    Maybe create a default template folder and place the files in that folder.
    *C:\Program Files\Mozilla Firefox\defaults\profile\

  • A question about project settings..FCP 7

    I am using FCP 7 and I'm a little overwhelmed with the myriad of project settings options.
    I use a Canon T3i and film in full HD (1920x1080 i think).  All my footage I transcode in compressor to Apple ProRes 422 before importing to FCP projects.
    I installed another computer and reinstalled FCP 7 and lost my old templates and importing some footage, I get the red line indicating unrendered footage.
    Is there a standard setting that Compressor and FCP use to make it easy to just transcode, import, and edit?  I'd like all my projects to look the best possible in full HD and there's hundreds of preset project settings and I'm a little unfamiliar with all the options.
    Anyone have any quick tips, pointers, or thoughts?

    If you drop a clip into the timeline, it means the sequence settings don't match the clip settings.  Make a new sequence, add the clip. FCP should ask "do you want the sequence to match the clip settings?" Click YES. If you don't see that, you might need to trash your preferences...or it might be an older version that doesn't support ProRes formats (FCP 5.1 and earlier).
    Another way is to choose an EASY SETUP that matches your clip settings, and then make a new sequence.
    And your camera shoots 1920x1080p...not i.

  • Newbie question about default Constructors

    I have this simple class with a constructor:
    ============================================================
    public class ScopeTest {
    public static void main(String[] args) { ScopeTest tst = new ScopeTest(); }
    public ScopeTest(String a) { System.out.println("ScopeTest(String a) : " + a); }
    ============================================================
    This class generates these errors when compiling:
    ScopeTest.java:3: cannot find symbol
    symbol : constructor ScopeTest()
    location: class ScopeTest
    public static void main(String[] args) {ScopeTest tst = new ScopeTest();}
    ^
    All the books and tutorials I read say that the compiler invokes the constructor of the super class (Object in this case)
    if it can't find one with the right signature in the class. Yet if I comment out this class's constructor it compiles and works.
    Can anyone explain???

    so u hv to put a default constructor...
    public class ScopeTest {
    public static void main(String[] args) { ScopeTest tst = new ScopeTest(); }
    public ScopeTest(String a) { System.out.println("ScopeTest(String a) : " + a); }
    public ScopeTest() { System.out.println("Default Constructor"); }
    }

Maybe you are looking for