Elementry Seach help is not working as per requirement.........plsss help

Hi Friends,
Here is my query on Sap Search help.
I have created a customised elelemtary search help zclarify in the table EKKO for the field  zf_clarify.
This search help i have created under the collective search help MEKK and the included search help ASH_MEKK.
Now my probelem is whenever i am trying to seach the PO using the table by using the zf_clarify as the reference i am not getting anything.
Ex- if you to to the selection criteria screen of EKKO table and try to searhch for any particular Purchase Order by selecting the PO,that po number will display in the selection screen.Similarly if i am trying to search through clarify option i am not getting any value in the clarify field.
Please help me where i am doing wrong, I have one confusion that while creating the Data Element there is a search help option,there i have given MEKK and zclarify,but i am not getting any value in the table seletion screen.
Please give me idea how to create the search help so that my problem will solve.
Thanks a lot
mrutyu n^

Hi Raju,
The below code only triggers
FORM USEREXIT_MOVE_FIELD_TO_VBKD.
VBKD-zzfield = xxxx-zzfield2.
ENDFORM.
when there is some manual change done on the Schedule line. So the control of the program will not stop on this form. Kindly suggest.
Regards
Siddharth

Similar Messages

  • Search and replace string not work as per required

    please find the attachment. i am trying to replace the variable names but it doesnt replace the variable as i expected. Please help me in this
    Attachments:
    Replace String.vi ‏8 KB
    Replace String.vi ‏8 KB

    You haven't configured the strings to be "default". Hence, all string elements in your attached vi's are empty.
    I have no idea what you try to achieve without those strings....
    Norbert 
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • PSE 10  and Adobe CS6: When running silent install help is not working afterwards

    Hello,
    I'm not sure if this is the correct forum. If not: Please help me find the correct one.
    I have a big issue with Adobe CS6 (and former versions like Photoshop Elements 10): When installing it from DVD running GUI everything is working fine afterwards. If I install e.g. Photoshop Elements 10 using "Silent Installation" help is not working afterwards. It states that it cannot locate the URL. I have not installed AIR and also do not plan to install it.
    I have 'played' a little around with Common Files\Adobe\helpcfg and help directory. Now at least I do not get an error message but still it's not the online help which opens in the browser but the web page that is defined as 'home'.
    The same I see now in Adobe CS6. I have e.g. packaged After Effects and Illustrator and when deploying it I'm not able to open help as well and I fear that this is the same issue.
    Has anyone deeper knowledge about how "helpcfg" is working? Any example files? Any other help appreciated as well.
    Kind regards
    János

    @hannilator Have you checked the exceptions folder contents for instructions on how to push to logged off computers? Here's what I get when I package CS6 (DesignWebPrem) and excude AIR/CHC:
    After you have deployed the package, separately install the products in the exception folder.
    IMPORTANT: Before you install the products in the exception folder, refer to the following Adobe Knowledgebase article for information on installing these products and configuring the settings correctly:
    http://www.adobe.com/go/aamee_exceptions
    NOTE: The installation commands provided below will work when the user is logged in to the client machine where the package is being deployed. For the scenario where the user is not logged in, prefix the following string to the command:
    sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'`
    As an example, here is the command to install "Adobe AIR" when the user is not logged in to the client machine (assuming Adobe AIR is part of the package):
    sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'` Adobe\ AIR\ Installer.app/Contents/MacOS/Adobe\ AIR\ Installer -silent
    ###################################### Command to install Adobe Dreamweaver Widget Browser ######################################
    Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer -silent -eulaAccepted -programMenu WidgetBrowser.air
    ###################################### Command to install AdobeHelp ######################################
    InstallAdobeHelp appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=AdobeHelp.air

  • SharePoint 2013 "Help Menu" not working (Sorry, the page you're looking for can't be found)

    The Built in SharePoint 2013 Help Menu (?) on our Enterprise Farm for both the sites and Central
    Admin does not work.
    On Central Admin help the error comes back as: "Sorry, the page you're looking for can't be found".
    The site collections Help menu gets the error :
    "Unfortunately, help seems to be broken...
    There aren't any help collections in the current language for the site you're using."
    We have installed on all servers in the farm:
    December 9, 2014 Cumulative Update for SharePoint Server 2013 package (build 15.0.4675.1000)
    as well as the latest SharePoint update KB2768001 1/15/2013.
    I have checked:
    Get-SPHelpCollection
    Title                                                                                              
    Name
    SharePoint Help                                                                                    
    WSSEndUser.1033.15
    SharePoint Foundation 2010                                                                         
    WSSEndUser.1033.12
    Central Administration Help                                                                        
    WSSCentralAdmin.1033.15
    SharePoint Server 2010                                                                             
    OSSEndUser.1033.12
    SharePoint Help                                                                                    
    OSSEndUser.1033.15
    SharePoint Foundation 2010 Central Administration                                                  
    WSSCentralAdmin.1033.12
    Teacher Help                                                                                       
    EDUTEACHER.1033.15
    Central Administration Help                                                                        
    OSSCentralAdmin.1033.15
    Student Help                                                                                       
    EDUSTUDENT.1033.15
    SharePoint Server 2010 Central Administration                                                      
    OSSCentralAdmin.1033.12
    PerformancePoint Dashboard Designer 2010 Help and How-to                                           
    DashboardDesigner.1033.12
    The URL for the site collections is https://servername...../_layouts/15/help.aspx?Lcid=1033&Key=HelpHome&ShowNav=true
    We are only using Default English (US) language packs.
    In the directory of
    Directory of C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\HCCab\1033
    there are cab files.
    There are no pending upgrades on any SharePoint or SQL server, all other SharePoint components are working
    normally.
    Any ideas or suggestions?
    Thanks.
    John
        

    I'm interested in getting the local help to work while this is offline, I saw the following in an article, did you do this and it still does not work for you?
    "However the help won’t show up in
    SharePoint 2013 sites. You need to change the Help Collection item property SharePoint
    Version to15 to
    make it work."

  • " help me please"  I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

    " help me please"  I have Windows 7  32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
    I have to boot with a Windows
    When I use the Mac operating system not have a problem  and DisplayPort to VGA Adapter Working properly
    why does not work with windows ?
    What should I do؟
    I'm grateful to give advice
    tanks
    [email protected]

    Someone in another section answered this. Thanks.

  • WBS element field in transaction CS71-F4 help is not working in ECC 6.0

    Hii
    In SAP, while working in SAP 4.7, tcode cs71, WBS element is coming via F4 Help. But after upgradation to ECC 6.0 EHP 5, this F4 help is not working. I can enter value manually.but F4 help is not working.
    Please Help.

    Hi,
    You can do it manually too
    1.  Choose function group 'CSDI' via Transaction SE80.
    2.  Choose screen '0260'in the 'Screens' area and switch to change mode
    3.  Choose the 'Element list' tab index.
    4.  In this area, choose the 'Reference' tab index and enter the value
        'PRP' in the 'Search help' column in the line for field
        'RC29N-PSPNR'.
    5.  Save your change and regenerate the screen.
    6.  The correct input help for the WBS element is now available in the
        initial screen of Transaction CS71/72/73.
    I hope F4 helps works for "Existing WBS BOM's" in CS71 after this
    Refer to Note : 714824 as well , it has reverted back the changes done by note : 422265
    Regards
    Gaurav

  • The 'Content, index, search' section of my help is not working in Mozilla

    Dear All,
    The 'Content, index, search' section of my help is not working in Mozilla.
    I am using robo8 and mozilla 8. Any idea? please help...
    Regards,
    Jobin.

    Dear William,
    It is a webhelp
    It is working in all other browsers except Mozilla.
    It is a merged help...
    waiting for your reply..:)
    Regards,
    Jobin.

  • F4 help is not working in IAC Iview

    Hi,
    There is IAC iview for transaction PA61
    F4 help is not working for the iview
    it workes in backend SAP PA61
    kindly give any hints what can we check
    thanks in advance
    b

    Hi,
    This might be due to the JRE version of the browser. We faced such issue and the update of JRE version in the browser helps to get the pop-up of F4 help. Check in the internet broswser Tools -> Internet Option -> Advanced. Check whether the JRE applet is checked or not. it has to be checked. if it is checked and even if you dont get the F4 help, upgrade the JRE version.
    Thanks,
    Mahendran B.

  • Help is not working in Hyperion System 9 WebAnalysis

    two months back we have installed Hyperion System 9.2.0.3 BI+ server and is working fine. however recently one user complained that WebAnalysis help is not working.<BR><BR>we are getting "page cannot be displayed" when clicking on Help --> contents and index from WebAnalysis -- <a target=_blank class=ftalternatingbarlinklarge href="http://hostname:19000/WenAnalysis">http://hostname:19000/WenAnalysis</a><BR><BR>this is the direct link to the webanalysis help <BR><a target=_blank class=ftalternatingbarlinklarge href="http://hostname:19000/workspace/docs/en/wa_user/frameset.htm?/workspace/docs/en/wa_user/launch.html">http://hostname:19000/workspac...n/wa_user/launch.html</a><BR><BR><BR>Do you know how to fix this?

    Hi Friends,
    I am working on Sandbox Server, in that Help (F1) is not working. When i try to click F1 system is opening the popup and showing the following message-
    The page cannot be displayed
    Plz help
    Regards
    Goutham

  • With input disabled field search help is not working.

    Hi Web dynpro abap Gurus
    Please help me on below requirement.
    If i make a input field disable then the attach search help is not working. Is there is any way by which
    I can make input field disabled and search help will also work for this field.
    I really need help on this, Please help me.
    Many thanks in advance.
    Sandeep Sharma
    09971995045

    Hi
    I dont think that a field can be disabled and allows to choose data using f4 simultaneously. you can enable the field and allow the user to select whatever he/she wants.
    Then in any action like on press of save or submit button which the user will trigger after entering the values, get the value entered by the user in that perticular field and fire a query on the table/view, which you have used as selection method of your search help, it help is coming from data element then look for check table in domain. if sy-subrc comes 0 than go ahead else give error that value selected is modified.
    Thanks
    Vishal

  • After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

    After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

    Izit software or hardware? Confuse:(
    Only can use wifi now.
    Any way thanks guys for ur suggestion:) amishcake and simes

  • F1 help does not work in transaction SE80

    Hi Experts!
    A strange error occurred in our ECC 6.0 SR3 system (Windows 2003 SE 64 bit based, MaxDB 7.6.03.009). F1 help does not work in transaction SE80. Either nothing is shown when a keyword as SELECT is marked and F1 key is pressed, or a strange popup appears with title u201CABAP Keyword Documentationu201D and root u201CHit List of Index Searchu201D - [screenshot|http://i43.tinypic.com/aox7d.jpg]. No matter what I choose in the tree it always closes, no help is displayed and SAP GUI returns in the main screen in transaction SE80.
    I found this thread [Re: SAP F1 Help and SE80 issue|Re: SAP F1 Help and SE80 issue] but it did not help me. This is my system information:
    SAP PC VERSION INFORMATION: saplogon.exe
    MAIN MODULE INFORMATION:
       saplogon.exe
       SAP Logon за Windows
       Final Release 710
       7100.3.12.1042
       1046700
    SYSTEM INFORMATION:
       Operating system: Microsoft Windows XP 5.1 (2600) Service Pack 3
       Internet Explorer v. 7.0
    Application help works perfect - I checked the configuration in transaction SR13 too.
    Any ideas will be appreciated!
    Thanks!

    Hi Presu,
    As it is seen from my previous post SAP GUI version is 7.10 SP 12. I downloaded the last SP 13 and installed it. Now SAP GUI information looks like this:
    SAP PC VERSION INFORMATION: saplogon.exe
    MAIN MODULE INFORMATION:
       saplogon.exe
       SAP Logon за Windows
       Final Release 710
       7100.3.13.1045
       1063164
    The problem is not resolved.
    This happens from different workstations with different versions and sub-versions of SAP GUI, so the problem is not caused from the GUI I think. It happens using different logon users and in all SAP system cliens.
    Any other suggestions?
    Best regards,
    Pit

  • Photoshop CS4 Extended ...Program's 'Help' does not work

    I have PS CS4 Extended ... the Help command does not work ... I get a message saying "there was an error launching th eAdobe Help application. You may need to reinstall the application and Help component.
    IK have un-installed the program completely and then reinstalled it. Still, the Help does not work, although the rest of the program seems to perform ok.
    I'm rather at my wits end.
    Has anyone any suggestions.
    Thansk.

    This won't fix your problem, but it might help as a workaround...
    This is the page that normally opens when you click Help - Photoshop Help... in Photoshop CS4:
    http://help.adobe.com/en_US/Photoshop/11.0/index.html
    -Noel

  • Why does my webcam not work with Skype - can anyone help?

    Why does my webcam on Mac Book air not work with Skype - can anyone help?

    Did you set the Skype Audio/Video preferences to use the camera?

  • I have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!

    i have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!

    Hi pystyke,
    Welcome to Apple Support Communities.
    You may find these links helpful with troubleshooting the audio issue you're experiencing:
    iPhone Assistant
    http://www.apple.com/support/iphone/troubleshooting/
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Best,
    Jeremy

Maybe you are looking for