Elements 10 and pef files

I have elements 10 and I was trying to open a .pef file and it could not open. I tried to reinstall Camera Raw 6.7 and it will not reinstall. Any suggestions.

if you have lost your "open with" for all file types, correct that: http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/right-click-open-wi th-command-missing-help-please/a9c3f139-075c-4285-b87d-25e899fb8b27

Similar Messages

PS ELEMENTS and raw files

I have PS Elements 7. I cant open raw files from a memory card shot in a Canon 6D. I went to help in Elements, and under camera raw plug-in, it says my version is 4.5.0.175. Do I upgrade this, and how? Am I also going to need a DNG converter?

You need ACR 7.3 according to this list
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
So I don't think you are going to be able access the CR2 files directly from Elements. (This is actually the Photoshop forum, and we don't know much at all about Elements. You can find the right forum at Photoshop Elements)
So you are going to need to install the free DNG converter, but it is no real hassle.

Elements and gif files

I in stalled PS Elementsd 2.0 on Windows 7 2013 and gif. files stopped working. What can be done?

As far as i know, windows 7 won't play animated gifs in the stock windows photo viewer like windows xp would.
Did you install some kind of add on to make windows photo viewer play animated gifs?
Are you sure windows photo viewer was the program opening and playing the animated gifs?
XnView is a nice program that will play animated gifs and do a whole lot more.
http://www.xnview.com/en/

Elements and .psd files

Hi all....I recently paid a graphic design firm to create a product brochure for me. It was supplied to me in .psd format.
I would like to add some text, and a small logo to the file, then save the file as a .pdf type file.
Will photoshop Elements give me this ability? or do I need to purchase the full Photoshop program.
This brochure will be customized and edited over and over again by me, so I need the ability to edit it in house rather than just paying him to miodify it for me every time.
thanx in advance
shane

Great - i will confirm with the deiginer whether or not the file contains CMYK / composite laters.
Also....I can't seem to download the trial version....in the past, I had downloaded a trial version of Photoshop....now when I try to download the Element trial, it doesn't work...it keeps sending me to a "Purchase now" page for the full Photoshop program...frustrating actually. That's why I resorted to posting the question here.
Thanx for your help by the way,
shane

Adobe Premiere Elements and .MOD files - can I make them compatible?

Any advice gratefully received!.. I have a laptop running on Windows 7, I've just installed PE10 and although I can import the footage from the hard drive into the time line, it's looking de-interlaced. There is audio and picture, just not a decent picture! Does anyone know how I can work around this?? any tips would be a help. (The footage is from a Canon Legria FS200)

Thank you both - I found it, and changed the file extension to .mpg
Unfortunately the footage looks awful in the timeline. I'm trying to get Adobe to help me and they keep promising me a call back 'within an hour and half!' It's now been a week of these false promises and no-one will get back to me. I've had 2 online chats where they say they can't help with any technical issue and that I need to call the helpline, which is what I'm doing anyway!...
Might have to just send it back soon and start with some other editing software!

Photoshop Elements and RW2 Files

I have a panasonic FZ28 that shoots RW2 RAW files. I see PE7 has Camera Raw but when I try and open the file it says it can't be parsed?
Thanks
Brian

Brian, I searched for the same... had the same issue... and was tickled to find your post that said you have the same camera as me. I'm just curious, are you as happy with the camera as I am? I bought one for me and one for my husband, and it's so good that i'm tempted to buy one more & just put it in the closet for the day this one dies. OMG... how did I ever find a camera with every feature I ever wanted... easy to use interface and the lightest weight I could have ever imagined. I'm just thinking it's the best kept secret out there. Or is it?
Thanks for the post here. I am off to get the download.

Can Elements open PEF RAW files?

I have Pentax K-5 IIs, can not get Elements 10 to open its PEF files. Elements 10 will open Pentax K-20D PEF files, not the K-5 IIs RAW files.

I thought the Pentax K5 IIs can shoot and record DNGs ?? !
Yes, it does! See here:
Pentax K-5 IIs Digital SLR Camera 12050 B&H Photo Video | B&H Photo Video
"For the photographers who shoot primarily in RAW, the Pentax K-5 IIs offers native support for both Pentax PEF and Adobe DNG 14-bit RAW files."

Adobe Premiere Elements 10 - missing and relinking files

I have adobe premiere elements 10 and I am hoping someone can please help me with an issue I am having with unlinked files.
The problem: somehow the files in adobe premiere elements organizer have lost the link w/ the originals. Whether I manually search or allow premiere elements to search, I am unable to relink the files. I thought I had the original file structure from the camera (Canon Vixia; file structure AVCHD - BDMV - STREAM - then there are the files). However all that is in the original file structure are the .xmp files (not the .MTS files like there normally are) I will be honest and say that the computer files did get rather disorganized w/ multiple copies of things (I was having issues w/ converting files w/ the mac, and I used a duplicate finder to find duplicates about a year ago and deleted what I thought were multiple copies of things). Then left the project alone, and now trying to reorganize the videos and make a DVD.
The goal: relink the files
The importance: Everything links up except for about 4-5 months worth of videos. Which happen to be the videos of my 2nd child's birth (her first moments in the hospital, first bath, first Christmas, first everything!) So this is extremely important to me that I find the files and relink them.
What I've done: Manually searched the mac, the backup drive and the cloud backup. No luck. I also had adobe premiere elements search - no luck. I have used the mac search function looking for key words and later the file name (which shows up in Adobe premiere elements organizer - but it has the little yellow question mark prompting me to relink the files - then I can't find the original to link it to).
Fingers are crossed: that someone can tell me there is something I can do with these .xmp files to relink them? Anything that can be done at all? The premiere elements organizer even shows a picture of what the video is - not just a blank gray screen - where is it pulling these images from if they don't exist on the computer somehow?
I've learned my lesson on keeping original files separate, but please help me save and preserve my daughter's precious first memories!
Thanks so much.

Thank you so much for your reply.
-When I right click the thumbnail in Elements Organizer & go to "show properties", I see a picture of a folder and the file structure where it should be found (Macintosh HD/Users/ourfirstlastname/Videos/09 30/ 12/ ). When I follow that file structure on our macintosh HD, there is no "videos" folder in the hard drive. As a side note, the file name in Elements is 00029.MTS so it is trying to find the MTS file.
-Yes, I have Premiere elements 10, working on a mac and I work with Elements Organizer 10 as well
-Yes, the problem is that I can't find on the computer hard drive the originals for those 4-5 months of videos. All that is there is the XMP files (which dates match what I'm looking for). There aren't any .mts files that match the dates anywhere to be found. It is unfortunately very possible I over-did it with cleaning but I really am holding out hope that I'm just looking in the wrong spot. I am pretty proficient on a PC but unfortunately rather new to the mac and was holding out hope that they are hidden somewhere and it's just user error that I can't find them.
-I don't actually have a project that is missing files - it's just missing in the elements organizer. I had not yet started the 2012 project yet. I was attempting to start the project this evening when I discovered that the files I had put in organizer months ago were not linking correctly. When I click on files that are present (basically some files after November 2012) and follow the link, I am able to find them (.MTS files and some .MOV files) in the hard drive.
-I very well could have renamed source media files and folders and likely moved them around. I feel like they would have to be somewhere for there to be an image on the Premiere elements organizer (image w/ little yellow question mark on it) - unless that image is part of the .xmp file?
-I do not have the original footage on the camera's memory. We only use the internal memory of the camera & transfer to computer & back up - keeping original file structure so I figured that was enough :-( Unfortunately that footage from 2012 is long gone off the camera.
Thanks again for your help. If it was any other footage I'd chalk it up to a lesson learned, but those first moments of my daughter's life are super important so I hope I can figure this out!

Windows 8 Elements 11 Problem with DNG and CR2 files

Have a Windows 8 machine with Elements 11 which has Camera Raw 7.4 installed and showing correctly in the editor. The Browser shows thumbnails of the DNG and CR2 files, but when an attempt is made to edit them, the editor opens but does not open the file. Same thing happens if I try to open the file using the File Open from the menu.
Also I have been through the help and forums and found an article about opening jpeg files as Camera Raw files (http://blogs.adobe.com/pselements/open-jpeg-files-in-adobe-camera-raw-in-photoshop-element s/) and this does not work either.
Help please !

Disclaimer: The following applies to WINDOWS EXPLORER. I don't use Bridge so I don't know if it's applicable at all to Bridge.
Adobe does not provide a codec for viewing Canon raw files as thumbnails. Canon has one for free but it only works on a 32 bit Windows system.
Early this year I found a free download for displaying raw file thumbnails that works on an x64 Windows system. Since that time the author realized there's a real demand for this software and has started charging for it. In any case, I find it works very well.
http://www.fastpictureviewer.com/codecs/
-Noel

How do I expand a ActiveDirectorySubnetCollection so I can view all elements and export to a CSV file?

Hello,
In the following, I list SiteName, Location, Subnets, and Severs, however I don't see all the servers or the subnets, presumably because Subnets are an ActiveDirectorySubnetColletion and Servers are a ReadOnlyDirectoryServerCollection. So I want to
expand this property so I can see all the elements of the collection, or array. I've tried the Select-Object -ExpandProperty, but I get an error due to -ExpandProperty looking for a string.
Any suggestions on how to expand both the Subnet and Server collections so I can see all elements and I can export to a CSV file?
[cmdletbinding()]
param()
$MyArray = @()
$Sites =[System.DirectoryServices.ActiveDirectory.Forest]::GetCurrentForest().Sites
foreach ($Site in $Sites) {
$obj = New-Object -Type PSObject -Property (
"SiteName" = $Site.Name;
"SiteLocation" = $Site.Location;
"SubNets" = $Site.Subnets;
"Servers" = $Site.Servers
$Obj | Sort $Site.Name | FL
$MyArray += $obj
$MyArray | export-csv -path $env:HOMEPATH\SitesSubs.csv -NoTypeInformation
Thanks for your help! SdeDot

I've got a script that might help you out:
http://gallery.technet.microsoft.com/scriptcenter/Convert-OutoutForCSV-6e552fc6
Blog reference:
http://learn-powershell.net/2014/01/24/avoiding-system-object-or-similar-output-when-using-export-csv/
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

Making file desin with elements and attributes implementation

hello
this is an FILE to IDOC
I have an xml file that need to be enter to the XI. the XML has attributes and elements.
I would like to know how can I make an element with some attributes and below there should be a subelement.
for example, in delivery there will be all the attributes, and I would like to make it an array so there will be below subelemnt in the name of carrier for example.
(if any one has other ways to implement this file feel free to suggest.)
- <delivery number="1234567890" shipment-type="Y014" shipping-point="1910" ifm-reference="125" status="final">
- 
<carrier>123456</carrier>
- 
<scheduled-departure>200810011000</scheduled-departure>
- 
<scheduled-arrival>200810031600</scheduled-arrival>
- 
<actual-departure>200810011015</actual-departure>
- 
<actual-arrival>200810031545</actual-arrival>
- 
</delivery>

>>that what I thought, but after I do the attributes for the element, I dont have the option to write for the element sub-element.
I guess the current row that is selected would be an attribute thus the option insert subelement is disabled. Always select the element and insert either attribute or subelement to it.
Thanks
SaNv...

I have recently purchased a new computer and photoshop element. It looks like its downloaded it but I don't know how to access it. it says file are ready...down load files have been extracted and saved to folder....launch PS elements and open specific fol

I have recently purchased a new computer and photoshop element. It looks like its downloaded it but I don't know how to access it. it says file are ready...down load files have been extracted and saved to folder....launch PS elements and open specific folder. it looks like it downloads. It then keeps taking me back to this page. Im not sure where to go next

if you have a win os you should have dl'd an exe and a 7z file.
put both in the same directory and double click the exe.

How to delete all projects and accompanied files from Adobe Premeiere Elements 13

I would like to delete all projects and files and start anew, but I cannot find a clear enough instruction how to do it. Please help'

vitprod
Same other versions as well.
There is no one delete button that wipes away the project file (.prel) and the project's assets. You need to go to the save locations of the project file (.prel) and its assets and delete
each one by one wherever they are saved UNLESS you pre-plan and, before the project is created, set up a particular project so that the project file with assets goes to its own folder instead of each component of the project going into a common place for Premiere Elements files and folder where you have to pick out the materials for deletion one by one by name.
Answers
Default type situation
If left at defaults and if your Premiere Elements 13 is running on Windows 7, 8, or 8.1 64 bit, go to Libraries/Documents/Adobe/Premiere Elements/13.0 and, in the 13.0 Folder, delete standalone files with your target project's name and delete files with your target project's name in the folders found in the 13.0 Folder.
Plan Ahead
Edit Menu/Preference/Scratch Disks - Set all to Same As Project.
Create a new folder at a hard drive location of choice.Then point the project file to that folder for the Save In.
Tip: When the Expert workspace of the new project opens, go to File Menu/Save As. Name the project and set the new folder created as the Save In of the Save Project dialog.
Please review and consider and then let us know if any of that worked for you.
Thanks.
ATR

Photoshop Elements 9 and CR2 files.

I have Photoshop Elements 9.0.3 on a Windows 7 laptop and I can't open CR2/RAW files. Is there something I can do to open CR 2/RAW files in PE9?

You need camera raw 7.3 for your camera. It is only compatible with PSE11 to 13. Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.6
Mac download (.dmg file) click here DNG Converter 8.6
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Will Elements and Lightroom open RAW files fro the Sony DSCRX-100 camera?

Will elements and l;ightroom open RAW files from the Sony DSCRX-100 camera ?

202daansn wrote:
Will elements and l;ightroom open RAW files from the Sony DSCRX-100 camera ?
I have the RX100 and confess to be an Adobe fan. You did not say which Lightroom or which elements you want to use. You need the latest versions.
Photoshop Elements 11 comes with Adobe Camera RAW (ACR) version 7.0 in place when you install it. Under the help menu, there is a choice to check for updates. If you do, ACR 7.2 installs. The RX100 is included in 7.2. Previous versions of Photoshop Elements will not udate to 7.2. When you open a RAW photo, a screen pops up that lets you adjust, convert and save to something Photoshop Elements can handle.
You have to have Lightroom 4.2 to get RX100 usefulness. Lightroom uses, but hides, the ACR engine. Instead the slider controls are built in the user interface. When you buy it, it installs as 4.0. The help menu also has an update choice so that you can get to 4.2 from 4.0.
You didn't ask, but Premier Elements 11 is a good choice for video because it is he first version that "officially" supports the high quality 1080p60 or "PS" setting in the RX100.
On T day, I shot RAW photos of my granddaughters dancing to a Wii game in terrible light. Yesterday I "adjusted" the batch of RAW shots taken with the RX100 in Lightroom and saved them as .jpg files. Today, I wll make a video in Premier Elements from those .jpg images, put in some pan and zoom effects, add a sound track and put it on Vimeo.
My view is that an RX100 owner needs PSE 11, PrE 11 and Lightroom 4 to take advantage of the camera's capabilties. Setting it on "fine" .jpg and uploading snapshots to Flicker leaves an awful lot on the table!
Bill

Elements 10 and pef files

Similar Messages

Maybe you are looking for