Elements 10 and the AAMEE_2_1 installer

Hi
I have Photoshop Elements 10 and am trying to customize it using the AAMEE 2.1 installer tool.
When i point the tool to the "Product Install Folder" location and choose "32-bit Package" it says "A Valid installer could not be found"..if i point it to the 64-bit Package it is ok.We have a 32-bit Win7 OS so this will not work.Is it a simple case of going back to our purchasing team and getting then to download a 32-bit version..?
Thanks
Gary

I believe so, for Enterprise software silently installed via the Command Line. That’s provided the system infrastructure supports it.
I’ve no personal experience but this document may help unless you have already seen it.
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html

Similar Messages

  • Any Reports show PM Orders Number, GL Number, Cost Element and the amount?

    Hi Experts,
    Are there any reports that display the PM Orders Number, GL Number, Cost Element and the amount?
    currently i have to use IW32 and click the COSTS tab then click button REP.PLAN/ACT. to view these information.
    Please Advise
    Thank you
    Regards

    There is no single report to show all the data. You have to use different reports or develop custom report.

  • I have tried to reinstall Photoshop Elements 9. The disc I own and the download installation program from Adobe both do the same thing. "Shared Technologies" failed to install and undoes installation.  Any ideas to get it to install?

    I need help getting Photoshop Elements 9 to install inspite of my "Share Technologies" failing to install.  Any ideas?

    Hi,
    See if this document helps - there are a few things that can clash with the installation.
    Install rollback and Shared Technologies | Windows
    Good luck
    Brian

  • Premier Elements was installed and not Elements on the download installation.

    How do I complete the installation of Elements by downloading?

    Try downloading again.  It is not clear what your problem is since you say Premiere Elements was installed.

  • During a error updating, I had to reinstall iTunes. When proceeding to install iTunes, the installer chooses M:// I dont have a M drive, I click change and the iTunes installer crashes. I've tried everything, help!

    Seriously no idea whats going on, and I'm usually pretty good with figuring an issue
    Heres the isse:
    When updating iTunes, after the restart I booted up iTunes and it crashed. I was prompted with iTunes had been updated incorrectly and to uninstall and reinstall iTunes. After downloading the installer from itunes.ca. I opened up the application, and clicked Next. Under the directory it says M Drive, I dont have an M drive at all, I click change and a prompt pops that says, "The volume M:/ is currently unavailable. Please select another." with "ok" being the only selection.
    After hitting ok, it says "itunes installer completed" "Errors occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation, run the installer again. Click Finish to exit the installer." Finish is the only selectable, and upon restarting the installer the same thing happens. I hope theres someone who can help me out with this.

    Hello Fix88,
    Thank you for the details of the issue you are experiencing with installing iTunes.  I found a couple of resources that I think will help with this. 
    I recommend reviewing the following articles:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    When uninstalling iTunes, it is important to remove iTunes and all related components in the order listed.
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Using xs:all element and the Weblogic provided SAX Parser

    I am trying to validate XML documents against an xsd schema which has within it
    the xs:all element to indicate that certain elements should be present but the
    order in which they appear is not important. I have found that when I try to parse
    a document against this schema using the SAXParser that is provided with Weblogic
    the xs:all element seems not to be supported.
    Has anybody else experienced this?
    I have tried the same code but using a different SAX Parser (Apache provided)
    and this no longer seems to be a problem.
    Any advice would be appreciated.

    Hi Jonathan,
    I took a quick look through our problem reports and did not see anything
    related to this issue. Is this with WLS 8.1SP1? I'd suggest creating a
    small reproducer and open a case with our award winning support group:
    http://support.bea.com or [email protected]
    Thanks,
    Bruce
    Jonathan Davison wrote:
    >
    I am trying to validate XML documents against an xsd schema which has within it
    the xs:all element to indicate that certain elements should be present but the
    order in which they appear is not important. I have found that when I try to parse
    a document against this schema using the SAXParser that is provided with Weblogic
    the xs:all element seems not to be supported.
    Has anybody else experienced this?
    I have tried the same code but using a different SAX Parser (Apache provided)
    and this no longer seems to be a problem.
    Any advice would be appreciated.

  • Just purchased Photoshop Elements and the serial number shows as invalid

    Whenever I enter my serial number a message appears : "This serial number is not valid for Adobe Photoshop Elements 12"
    How do I solve this? The live chat has not been working as well so I don't know who to contact about this issue.
    Thank you!

    Hi,
    The original poster or yourself gave no indication of which operating system you are running on.
    Around the time of the original post there was a problem with the Adobe server and a note was put out which may have answered the original posters problem.
    You don't tell us anything about your problem - any error message?
    By the way, this is a user to user forum where other users try to help - Adobe staff only occasionally look in.
    Brian

  • When I start de application, I get two messages at once. The first one tells me that there are two upgraded elements and the second one tells me that a customer of mine has made some online changes on the website. Then I can do nothing more.

    Beste forum,
    Ik heb een groot probleem met Muse.
    Als ik het programma opstart en een bestaande website open, krijg ik twee meldingen te zien: de eerste zegt dat er twee geupsamplede bestanden zijn. De tweede dat er online een wijziging heeft plaatsgevonden. Beide vensters zijn vervolgens niet aan te klikken en het programma doet niets meer.@

    The message tells that published version of the site includes some changes which you can synch to your Muse file, is that after sync Muse hangs ? is it with a specific file or any file ?
    If you try to undo the changes , are you able to open the site and work ?
    Thanks,
    Sanjit

  • Bridge and the cloud installation

    I'm installing Photoshop CC on a computer that has PS 5.1; a message tells me to close Bridge before it can continue, but Bridge is not open. Please help.

    Hi jillbuhler,
    Please check Task Manager in Windows and Activity Monitor in Mac for Bridge or any Adobe Application and close if it is running. Try reinstalling Photoshop CC and it should work fine.
    regards,
    Abhijit

  • I downloaded the new upgrade for Premier Elements 13 the other day, and now my program will hardly operate and will not do basic functions.  What can I do?

    I downloaded the new upgrade for Premier Elements 13 the other day, and every since then my program will hardly operate and cannot do most functions.  What can I do?

    Bill
    I went to the Premiere Elements 13 tryout page at the Adobe web site and downloaded the tryout. I used the Firefox browser (latest version).
    These are the details according to what was presented to me today
    1. In choice of download, I selected Multiple LanguagesIWindows 64 bitI 1.67 GB. I do not have a Windows 7 or 8 32 bit computer.
    In your case, you would expect that you used used Multiple LanguagesIWindows 1.50 GB (which would have been the 32 bit version
    in agreement with your Windows 7 or 8 32 bit computer.
    2. When I pressed the Download button, there appeared
    Akamai Download Manager
    Browse For Folder dialog - (where I designated Desktop as my save location for the saved file/folders from the download)
    3. The first file to download was the .7z which is named Premiereelements 13_LS26_win64.7z (in my case, in yours it should be ...._win32.7x)
    File 1 of 2.
    The second file to download was the .exe which is named PremiereElements 13_LS26_win64.exe (in my case, in yours it should be..._win32.exe)
    4. When "3" is finished, automatically the Install Now comes up with a dialog regarding the .exe with an Open button. Click on the Open button.
    5. Next there is a Folder Location dialog which I had set
    C:\Uses\Owner\Desktop\Adobe Premiere Elements 13
    I clicked next in this Folder Location dialog.
    6. Next there was an Adobe Premiee Elements 13 dialog "Preparing Files" with mention of "Extracting Files".
    When the extraction process was complete, there was the automatic appearance of the Files Are Ready with a check mark next to
    "Launch Adobe Premiere Elements 13. There I clicked the Finished button.
    7. Next up was the Adobe Installer dialog and the "Initializing Installer" message.
    8. Next came the Welcome dialog with choices of Install or Try. I selected Try.
    If you have a purchased serial number already, I assume that you can click install and use your purchased serial number.
    9. Next came the sign In Required dialog where I click the Sign In button.
    10. Next the Adobe Software License Agreement to which I clicked Accept.
    11. Next the Options dialog -
    Adobe Premiere Elements 13 4.1 GB
    Language English (North America)
    Location C:\Program Files\Adobe
    to all of 11 I clicked Install.
    and said Yes to User Account Control pop up.
    12. Automatic Install from there on.
    When I looked at my desktop I found saved there
    a. the .exe file
    b. the .7x file
    c. an Adobe Premiere Elements 13 Folder
    any of which I believe I could have installed from as I have described to you previously.
    If you cannot get the above to work, then you can try going through the process of getting the Adobe Premiere Elements 13 tryout
    from
    Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
    There you will end up with the .exe and .7z downloads. After you download and save these two to your desktop, then you begin the
    process by double clicking the exe and following the on screen instructions.
    Please review the above and determine how much of it you have been through before and the choices that you have made along the way.
    ATR

  • How do i initialise the installation of elements 12. the installer fails

    I purchased elements 12. I have downloaded the virtual disc. I open it and the 5 packages appear. I click the Install. the installer fails to initialise. ..my machine is up to date. Support advisor says that there are no issues. ..??

    Thanks for that kglad but I have been a mac user for some years and have
    installed numerous programs, though I must admit that I am not up to speed
    with the tec terms. I am in no doubt that there is an issue with the
    installation - I also get a popup that tells me that the installer failed
    to launch. I wonder is there any issues installing elements and the new mac
    10.9 maveric  - it was released not so long ago and thus experience with it
    has been limited.
    I can add that I am running Lightroom and it works fine.
    thank you once again

  • Programs won't allow login after installer of new Elements and Premiere.

    I've download both Photoshop Elements and Premiere new installs with alot of difficulty. Finally got through installer to launch then to login. But, login just sat there spinning. Yet, outside of these programs, I can login into my Adobe account. I'm so frustrated with this purchase. Please help.
    Suzyj

    You're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content

  • PS-Relationship between the system status in wbs elements and activities.

    Relationship between the system status in wbs elements and activities.
    We have the following requeriment with the system status in PS. We have a project with complete technically status and we want to undo the complete technically status in one activity without changing the complete technically status in the WBS element or the project.
    The reason is that after putting the complete technically status, users have to change the values in the P.O. We don´t want "open" all the project and we only need to "open" the activity where the P.O. are in.
    Is that possible? How is connected the system status between activities, wbs elements and the project son I can change the status in the below step without changing the higher steps?
    Thanks in advance.

    Hi Bala
    Yes, you have put it rather correctly.
    We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
    I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
    I hope it's clearer now.
    Vinitha.

  • Is there any fix for the flashplayer installer not working on a windows 7, 64-bit, using firefox?

    I Hit the download link, get the permission windows, and the flashplayer installer window comes up, but doesn't do anything. i left it up all day when i went to work, come home 12 hours later and it was still just sitting there not installing. Is there a fix for this? i have looked everywhere and nothing that i have found has worked. even the suggestions on the adobe help page doesn't work..

    And you used the offline installers from the link that Andy posted:
    Flash Player for Internet Exporer - ActiveX
    Flash Player for Firefox - NPAPI
    If yes, please post the contents of the FlashInstall.log file in C:\Windows\system32\Macromed\Flash

  • Would like to create a script for list all elements and structure of an indesign document

    Hello everybody,
    I'm a very beginner in indesign scripting.
    I would like to create a script in order to list all elements and the inner structure of a n indesign document.
    The aim for me is to understand how elements are sorted and arranged into indesign, and be able to find an specific element by its item name.
    The output document could be an xml or txt document with a treeview structure.
    I would like have a rough idea of which kind of javascript code I should use for that.
    Thanks for answers.

    Hi Ossydoc,
    You can use Muse to create such a website. All you need to do is, create links in Muse for the sermons and select  " link to File " in the hyperlink option and link to those Mp3 files.
    Please refer to this screenshot :- http://prntscr.com/4xvdup
    Now, when you publish your site,  Muse would automatically upload those files onto the server and the users would then be able to listen as well as download those sermons using the links on your site.
    Hope this helps
    Regards,
    Rohit Nair 

Maybe you are looking for