Elements 10 Checksum error

I have just purchased and downloaded Elements 10 for Mac but it won't install.  The file is PhotoshopElements_10_WWEFDJ.dmg created 13 September 2011.  When I try to open it I get a chcksum error.
One post to this forum said to turn off checksum verification in Disk utilities (seems kind of dumb) so I tried that.  the file opened and installation failed.  I tried it a second time after a system restart but it failed both  times with the following text
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 17 error(s), 1 warning(s)
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirO3AIPQCR/Assets2/Fonts/KozMinPr6N-Bold.otf" to "/Library/Fonts/KozMinPr6N-Bold.otf" Error 0(Seq 1538)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1538)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050:  - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050:  - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
Second attempt
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 19 error(s), 3 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirsFmYmern/Assets2/Fonts/KozMinPr6N-Bold.otf" to "/Library/Fonts/KozMinPr6N-Bold.otf" Error 0(Seq 1538)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1538)
ERROR: DF024: Unable to restore file at "/Library/Fonts/KozMinPr6N-Bold.otf" from backup at "/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/Cleanup At Startup/.tempiKe3LG" Error 0(Seq 1538)
ERROR: DW063: Error rolling back command ARKDeleteFileCommand(Seq 1538)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050:  - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050:  - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
I tried renaming the downloaded file and downloaded again.  Still a checksum error.  It looks like  this file is corrupt.

You've got a corrupted download.
Get a new download:  download the trial version and install that.  Use your serial number to register and activate it.
Ken

Similar Messages

  • Invalid Checksum Error for Photoshop Elements 10 installation

    I have tried installing Photoshop Elements 10 on my Macbook but I got an "invalid checksum" error (saying that the following disk images couldn't be opened).  Was there a previous solution to this type of problem?

    That response is not at all helpful.  I have no idea what you were referring to, but there is no pale yellow bar at the top of the forum when I am looking at it now.
    In the future, consider posting a URL or something else that will continue to be relevant and useful in a persistent way.  Perhaps typing a sentence or two about what's going on if you know.  If it seems obvious to you, that doesn't mean it will be in the future to others having the same problem.

  • Checksum Error after downloading

    Hi, I purchased as a bundle both Adobe Elements 10 and Photoshop Elements together at the half price special. Adobe Elements 10 installed just fine with serial number provided for me...however
    Photoshop Elements downloads and upon completion a pop-up window states that "unable to verify, checksum error" and only thing I can do then is to cancel the whole thing. I've tried both download procedures with the same result, failure to get my Photoshop Elements installed due to checksum error...any suggestions?
    thanks

    All you can do is try downloading again from the Adobe Web site.  Use IE, if you're using a different browser.
    Ken

  • CMOS Checksum Error on MSI 785GM-E51

    Hi, I have 2 years old MSI 785GM-E51. Approximately 2 - 3 months ago, my PC just go hang without any reasons, even the mouse / keyboard won't respond to anything.
    After I reset, sometimes it's fine, but sometimes it's hang again, the interval is random. Sometimes it even hang when in the POST or when i enter BIOS setting.
    After several restart, it's sometimes gives me CMOS Checksum Error, so I decided to reset the CMOS using jumper method. After that my PC just works normal.
    Until a week ago, my pc start to hang randomly again, the symptom is similar but this time sometimes it's not hang, but the PC just restart immediately with black / white / blue random pattern
    displayed momentarily on the screen. And it always display CMOS Checksum Error. I already tried reinstalling Windows, and updating BIOS via flash disk from Live Update 5, no use.
    I already tried to plug out my VGA and using the onboard one, still crash / hang randomly. I also test Memtest overnight with passing 11 pass without error.
    Is it my motherboard already dead? or it's my PSU? CPU?
    Here is my complete specs:
    AMD Phenom II X4 955BE
    MSI 785GM-E51
    DDR3 Dual Channel 4GB RAM (corsair, forgot the model)
    Radeon 5770
    WDC 1TB
    WDC 1.5TB
    Amacrox Free Style 650W
    Thanks in advance.

    Quote
    Yesterday i desperate enough and change some BIOS settings, and
    surprisingly, the CPU is much cooler!
    Try entering bios, hitting f6 for optimized defaults then save and exit. See if problem persists.
    Quote
    As far as I remember, no, the crash / hang time i remembered is when POST / boot / startup / browsing / install app / playing games / copy file.
    And one more thing, when it hangs, it really hangs, not just the windows, sometimes it even not respond to reset button, so i have to power it off. But sometimes it respond
    to reset button, but with quite a long delay, it could half a minute i think.
    Have you tried re-seating the cpu,memory and all of the power connectors etc?
    What are the amp ratings on the 12v rail of the PSU? I found this on thier website but dont have time to dig furthur: Quote
    4-Channel 12V Rails Design
    Although the VGA you list only needs 24a on a 12v rail.
    Quote
    what's cpuid / ram timings / spd? where i can look at it?
    http://www.cpuid.com/
    When the program opens, take a screen shot of the tab that describe how your ram is running, It will show the current timings,speed, single or dual channel. Also take a ss of the spd tab, which will show the jdec standards that apply to that ram and the xmp profile. Then post the SS's to imageshack or the link and link them.

  • How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

    According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
        Integrity can be enabled when the system is not running on Storage Spaces. When
        integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
        fails the read operation by default. If you don’t want the read operation to fail, you
        can configure ReFS to continue with the read operation. A related event will be logged
        regardless.
    So then how do I configure it to do that???
    (And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
    with integrity streams enabled, via format E: /fs:ReFS /i:enabled
    For those who want more details, here's the situation: 
    I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
    And an event ID 133 from ReFSv1 gets logged in the System log:
    Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
    This is indeed the correct default behaviour.
    What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
    been able to find anything.

    Hi Tommy,
    >>How can I configure ReFS to NOT fail read operations when a checksum error is detected
    We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
    -Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.  
    Regarding this point, the following article can be referred to as reference.
    Set-FileIntegrity
    https://technet.microsoft.com/en-us/library/jj218351.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Could not validate SPNEGO token.java.lang.Exception: Checksum error.

    Hello consultant:
    We are trying configurated SSO usind SPNEGO  module
    We have a portal 7.0 ehp1 and Active Directory Microsoft versión 2003 native
    we have followed the steps described in note Sap 1457499"Note 1457499 - SPNego add-on"
    When we have logged with user Active Directory and we try access to portal we obtain following error:
    Authorization check user error
    We have Deploy the Web diagtool from SAP Note 1045019 on the J2EE server, run it and perform the
    following steps:
    1. Select "Component" = "security" and "Activity" = "all"
    2. Click the "Go" button, followed by the "Add All" button
    3. Select "Component" = "All" and in the "Search pattern" field write "com.sap.security.spnego"
    4. Click the "Go" button, followed by the "Add All" button
    5. Start the tool
    Then we have reproduce the problem and stop the tool. The generated zip file will contain following error:
    15:45:20:078 Error J2EE_GST_PRD SAPEngine_Application_Thread[impl:3]_15 ~p.security.spnego.krb5.crypto.DesCrypto Checksum error! checksum: 0xc46bfed8d0dbc54221ee75405c8cd5ac; calculated checksum: 0x6ead7e801608b729a6957597327f2ba5
    15:45:20:078 Error J2EE_GST_PRD SAPEngine_Application_Thread[impl:3]_15 ~m.sap.security.spnego.SPNEGOLoginModule Could not validate SPNEGO token.
    java.lang.Exception: Checksum error.
    at com.sap.security.spnego.krb5.crypto.DesCrypto.decrypt(DesCrypto.java:43)
    at com.sap.security.spnego.krb5.KrbEncryptedData.decrypt(KrbEncryptedData.java:81)
    at com.sap.security.spnego.krb5.KrbApReq.decrypt(KrbApReq.java:67)
    at com.sap.security.spnego.SPNEGOLoginModule.parseAndValidateSPNEGOToken(SPNEGOLoginModule.java:234)
    at com.sap.security.spnego.SPNEGOLoginModule.processAuthorizationHeader(SPNEGOLoginModule.java:385)
    at com.sap.security.spnego.SPNEGOLoginModule.login(SPNEGOLoginModule.java:102)
    at com.sap.engine.services.security.login.LoginModuleLoggingWrapperImpl.login(LoginModuleLoggingWrapperImpl.java:185)
    at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:70)
    at java.security.AccessController.doPrivileged(AccessController.java:246)
    at com.sap.engine.services.security.login.FastLoginContext.login(FastLoginContext.java:181)
    at com.sap.engine.system.SystemLoginModule.login(SystemLoginModule.java:90)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
    at java.lang.reflect.Method.invoke(Method.java:391)
    at javax.security.auth.login.LoginContext.invoke(LoginContext.java:699)
    at javax.security.auth.login.LoginContext.access$000(LoginContext.java:151)
    at javax.security.auth.login.LoginContext$4.run(LoginContext.java:634)
    at java.security.AccessController.doPrivileged(AccessController.java:246)
    at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java:631)
    at javax.security.auth.login.LoginContext.login(LoginContext.java:557)
    at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:912)
    at com.sapportals.portal.prt.service.authenticationservice.AuthenticationService.login(AuthenticationService.java:367)
    at com.sapportals.portal.prt.connection.UMHandler.handleUM(UMHandler.java:126)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:181)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)
    at java.security.AccessController.doPrivileged(AccessController.java:246)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(AccessController.java:219)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Could you help us?
    Many thanks for your collaboration

    << Do not post the same question across a number of forums >>

  • Apex 2.2.1- error in editing a report withIE 6: ORA-20001- Checksum error

    Hi all,
    I'am getting an Error when I try to edit a report with Internet Explorer 6: ORA-20001-...- Checksum error.
    With Firefox it works fine.
    Customer is using IE as standard browser and Firefox is not available here.
    Any Ideas?
    Kazim

    I had to apply Patch 4554072, provided with APEX.
    This patch is available in the directory patch\bug4554072.
    Kazim

  • Copy files between pcs - checksum error

    Scenario:
    - Two PCs (A and B) in a small LAN.
    - Computer A runs a NFS and a FTP server. I can transfer file from A to B mounting the nfs exported directories or downloading them via FTP.
    - The files can reside in ext3 or xfs partitions, on different drives, in A and they are being copied to B in ext3 or xfs partitions, again on different drives.
    - Drives and filesystems are healthy (knock on wood).
    I download a given file along with its checksum file (md5 or sfv format), from internet on A: the checksum check using cfv (tried even md5sum) says it's allright.
    Then I copy the file on B (via FTP or NFS - it doesn't matter), check it again and I have an error ("bad crc"). Sometimes for the file I download, there's a torrent: if I use the torrent file and check the integrity of the downloaded file (with ktorrent or gtorrentviewer), I find that there's a missing piece.
    The above happens random, not always and not with all files.
    A really strange thing is that, if I mount A's exported directory in B and if I run the checksum check from B, I also get an error (as said above, if I check the file directly on A, it's good).
    I can't remember when this started - in your opinion, where should I look for solving this?

    I dont really understand the torrent part of the story.
    Sorry - I wasn't that much clear and my english doesn't help
    A torrent file can be used for an integrity check of the file: not only it reports if the checksum is right or wrong, but - in this latter case - it can tell you that there are missing pieces in the file and how many.
    Hmm and it sounds like pc B isnt that healthy
    I checked for filesystem sanity in both PCs, and I also run the Seagate diagnostic tool on both of them. The chance that 4 hard disk are failing at the same time in the same PC is negligible. Anyway, I'm open to suggestions here - maybe it's an hardware issue, but I don't think it's related to the hard disks.
    what if you try it with an usb stick ??
    I'll try copying files to an external drive and to another PC - thanks for the idea
    try to check the size of the file you copy if there are both equal.
    They aren't - otherwise I won't get that checksum error. The difference is usually small, though - only a few kbytes: it seems to me that the copy process doesn't end properly.

  • Premiere Elements 12, Error 1

    Hello
    I have installed on my PC Windows7 and Adobe Premiere 12 since April this year. For some days I can not use Premiere Elements. It comes following message: “Please uninstall and reinstall the product. The error code shown of the Screen is “Error.1”.
    I have reinstalled the entire program today but unfortunately is still the same error message: Error: 1
    What can I do to fix the error? Please be so kind and take Your help in simple words because my English is not so good.
    Thank you very much in advance.
    Gernot Gall

    Gernot Gall
    Premiere Elements 12 on Windows 7 (assumed 64 bit)....
    Very pleased to see that you have resolved your Premiere Elements 12, Error 1 issue, using an uninstall/reinstall.
    Just two questions....
    1. Was the solution doing the uninstall and reinstall, but with the antivirus and firewall(s) disabled?
    2. Have you updated 12 to 12.1 Update, using an opened project's Help Menu/Update? If not, please do so.
    Best wishes as you move forward with your Premiere Elements projects. Great job.
    ATR

  • Problem with Adobe Premiere Elements 10 : error DW046

    Dear community members,
    I have bought Adobe Premiere Elements  10 and installed it from the DVDs on my MAC OSX10.5.8 on december 27, 2013
    When creating a new project , I get the following message :
    following a serious error, Premiere Elements 10 must stop
    Then I click OK and I get a new message :
    The Premiere 10 application has closed suddenly after having been rebooted
    Then I end up to the error report window. I have sent the error report  to Apple  ( I can send it to you if you want)
    I have also got the following error message :
    DW046 : following conflicting process were running, block : dynamiclinkmanager
    Notice : it seems this problem is occuring since I underwent a power failure while working on a project. When I want to open an existing project I get the following message :
    it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
    When I say YES, I save it and it comes back to the welcome menu and I cannot see this project.
    I have tried to deinstall and reinstall Premiere 10 : this is impossible since I am required to deactivate dynamiclinkmanager that I cannot find.
    Notice that Adobe AIR is unable to find a solution whilst it recognizes there is a problem.
    Thanks you for your help

    AT Romano,
    The various links you have provided were very helpful. I could kill the dynamiclinkmanager.
    It seems that it is now working.
    Thank you, your reply was very quick and your advices very good
    Kitaguchi38
    Date: Wed, 1 Jan 2014 19:39:00 -0800
    From: [email protected]
    To: [email protected]
    Subject: problem with Adobe Premiere Elements 10 : error DW046
        Re: problem with Adobe Premiere Elements 10 : error DW046
        created by A.T. Romano in Premiere Elements - View the full discussion
    kitaguchi38
    When you get the message
    it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
    Do you go to the last AutoSave to open that or do you go to the save location of the project file (project.prel) to open that file?
    Are you getting message to close the dynamiclinkmanager so that you can move forward?
    If so, please check out dynamiclinkmanager location in the following link
    http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations -photoshop-elements.html
    Have you seen this Photoshop Elements Forum thread with the same DW046?
    http://support.muse.adobe.com/message/4771879
    More later.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972397#5972397
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972397#5972397
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972397#5972397. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Premiere Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • XML document must have a top level element. Error processing resource

    Hi,
    I am trying to send a XML file to a web browser from a servlet. I read the contents of the XML file into a string and I am sending it to the brower. Before I do this I set the 'Content-type' header of the httpResponse to "application/xml" . Embedded in the XML file is an xml-stylesheet elemetn indicating which *.xsl stylesheet to use to parse the XML content.
    I get the following error:
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    XML document must have a top level element. Error processing resource 'http://127.0.0.1:8080/testReplyingXML/xml-to-html.xs...
    Now, if I take the stylesheet element out of the XML string I sent, then the browser stores the content into and *.xml file. I manually run the "xml-to-xsl " stylesheet mentioned in the error output above, and there is no problem, the xml content gets successfully transformed in a viewable HTML .
    It is only when I embed the "stylesheet" element into the XML content that I get this error.
    So the browser is receiveing valid XML.
    I am not sure if the above error is complaining about the XML content I send or the stylesshet .
    Does anyone have an idea of what am I doing wrong?
    For your information here are my servlet code and the XML file:
    servlet:-
    package webapps.testReplyingXML;
    import java.io.BufferedReader;
    import java.io.IOException;
    import javax.servlet.ServletException;
    import javax.servlet.http.HttpServlet;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    import java.io.FileReader;
    import java.util.Enumeration;
    import java.util.StringTokenizer;
    import java.io.PrintWriter;
    public class ReplyXML extends HttpServlet {
              static int transactionCount = 0;
              public void doGet(HttpServletRequest req, HttpServletResponse res) throws ServletException ,IOException {
                   String Q_PARAM = "query";
                   String requestString = req.getQueryString();
                   for ( Enumeration en = req.getParameterNames() ; en.hasMoreElements() ; )
         String k = (String)en.nextElement() ;
         String[] x = req.getParameterValues(k) ;
         String s = null;
         String DATA_PARAM= "";
         for(int i = 0 ; i < x.length ; i++ )
         s = x[i] ;
         //System.out.println("s = " + s);
         if (k.equals("query")){
              try {
                             //res.setHeader("Content-Type", "application/xml");
                             //res.setHeader("Transfer-Encoding", "chunked");
                             //res.setHeader("Cache-Control", "no-cache");
                             //res.setHeader("Server", "Jetty/5.1.10");
                             //res.setHeader("Pragma", "no-cache");
                             //res.setHeader("X-Joseki-Server", "Joseki-3.0-dev");
                             res.setStatus(res.SC_OK);
                             StringBuffer fileData = new StringBuffer(1000);
                        BufferedReader reader = new BufferedReader(new FileReader("sparql_results.xml"));
                        char[] buf = new char[1024];
                        int numRead=0;
                        while((numRead=reader.read(buf)) != -1){
                        String readData = String.valueOf(buf, 0, numRead);
                        fileData.append(readData);
                        buf = new char[1024];
                        reader.close();
                        String xmlMsg= fileData.toString();
                        System.out.println("XMLMSG= " + xmlMsg);
                             PrintWriter outresp = res.getWriter();
                             outresp.println(xmlMsg);
                             outresp.close();
              }catch (Exception e) {
                   e.printStackTrace();
              public void doPost(HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException {
                   doGet(req, res);
    XML FILE:
    <?xml version="1.0"?>
    <?xml-stylesheet type="text/xsl" href="xml-to-html.xsl"?>
    <sparql
    xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
    xmlns:xs="http://www.w3.org/2001/XMLSchema#"
    xmlns="http://www.w3.org/2005/sparql-results#" >
    <head>
    <variable name="book"/>
    <variable name="title"/>
    </head>
    <results ordered="false" distinct="false">
    <result>
    <binding name="book">
    <uri>http://example.org/book/book6</uri>
    </binding>
    <binding name="title">
    <literal>Harry Potter and the Half-Blood Prince</literal>
    </binding>
    </result>
    <result>
    <binding name="book">
    <uri>http://example.org/book/book5</uri>
    </binding>
    <binding name="title">
    <literal>Harry Potter and the Order of the Phoenix</literal>
    </binding>
    </result>
    <result>
    <binding name="book">
    <uri>http://example.org/book/book4</uri>
    </binding>
    <binding name="title">
    <literal>Harry Potter and the Goblet of Fire</literal>
    </binding>
    </result>
    <result>
    <binding name="book">
    <uri>http://example.org/book/book3</uri>
    </binding>
    <binding name="title">
    <literal>Harry Potter and the Prisoner Of Azkaban</literal>
    </binding>
    </result>
    <result>
    <binding name="book">
    <uri>http://example.org/book/book2</uri>
    </binding>
    <binding name="title">
    <literal>Harry Potter and the Chamber of Secrets</literal>
    </binding>
    </result>
    <result>
    <binding name="book">
    <uri>http://example.org/book/book1</uri>
    </binding>
    <binding name="title">
    <literal>Harry Potter and the Philosopher's Stone</literal>
    </binding>
    </result>
    </results>
    </sparql>

    Error processing resource http://127.0.0.1:8080/testReplyingXML/xml-to-html.xs...
    Well, if one more character had been deleted from that message then you would have a problem. But as it is, the error message says there's an error processing a resouce whose name ends with "xml-to-html.xs" followed by something. That would be the stylesheet if I'm not mistaken. Most likely the browser can't find it at the URL mentioned in the error message.

  • Solaris 10 express developer ed. dvd checksum error

    Hi,
    I downloaded the solaris 10 express developer ed. dvd. I used Sun Download manager for the download. the file e had checksum error. Hence the DVD contains checksum error. Is there any way we could correct the download without the need re-download the entire file. Other files ending a,b,c,e dont have this problem. Am i the only one getting this problem or is it a known issue?
    with regards,
    ashwin

    Sorry there is no real way to solve this other than downloading the last segment of the file.

  • Checksum error in Manual Tabular Form

    Hi everyone,
    I have created 2 (manual tabular forms) on a same page but i am getting checksum error for one of the tabular form.
    Here is my code:
    1 st Tabular Form:
    select
    x.del,
    x.ECGEXST_ID,
    x.LEAD_CD,
    x.ST_ID,
    x.ENTERED_DTS,
    X.ENTERED_BY_NM,
    X.UPDATED_DTS,
    X.UPDATED_BY_NM,
    x.cks
    from (
    select
    htmldb_item.checkbox(1,ECGEXST_ID) del,
    htmldb_item.hidden(2,ECGEXST_ID) ECGEXST_ID,
    htmldb_item.select_list_from_query (3, LEAD_CD,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
    htmldb_item.select_list_from_query(5,ST_ID,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 17',25) ST_ID,
    wwv_flow_item.display_and_save(6,to_char(ENTERED_DTS,'MM/DD/YYYY')) ENTERED_DTS,
    au.LAST_NM || ', ' || au.FIRST_NM ENTERED_BY_NM,
    wwv_flow_item.display_and_save(7,to_char(UPDATED_DTS,'MM/DD/YYYY')) UPDATED_DTS,
    au1.LAST_NM || ', ' || au1.FIRST_NM UPDATED_BY_NM,
    htmldb_item.md5_checksum(ECGEXDT_ID,LEAD_CD,ST_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
    from ECGEXST,
    app_user au,app_user au1 where au.MSPR_ID(+) = ECGEXST.ENTERED_BY_MSPR_ID and au1.MSPR_ID(+) = ECGEXST.UPDATED_BY_MSPR_ID
    and ECGEXDT_ID = :P65_ECGEXDT_ID
    union all
    select
    htmldb_item.checkbox(1,null) del,
    htmldb_item.hidden(2,null) ECGEXST_ID,
    htmldb_item.select_list_from_query (3,null,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
    htmldb_item.select_list_from_query(5,null,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 17',25) ST_ID,
    wwv_flow_item.display_and_save(6,null) ENTERED_DTS,
    null ENTERED_BY_NM,
    wwv_flow_item.display_and_save(7,null) UPDATED_DTS,
    null UPDATED_BY_NM,
    htmldb_item.md5_checksum(null,null,null,null,null) cks
    from dual) x
    UPDATE PROCESS:
    declare
    l_cks wwv_flow_global.vc_arr2;
    j pls_integer := 1;
    val1 varchar2(100);
    val2 varchar2(100);
    begin
    -- Get original MD5 checksum
    select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,ST_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
    BULK COLLECT INTO
    l_cks
    from ECGEXST where ECGEXDT_ID = :P65_ECGEXDT_ID;
    -- Compare the original checksum, l_cks,
    -- with submitted checksum, htmldb_application.g_fcs.
    -- If they are different, raise an error.
    for i in 1..l_cks.count
    loop
    if htmldb_application.g_fcs(i) != l_cks(i) then
    rollback;
    raise_application_error(
              -20001,
         'Current version of data in database has changed '||
              'since user initiated update process.');
    -- return;
    end if;
    end loop;
    -- update ECGRSTST
    for i in 1..htmldb_application.g_f02.count
    loop
    if htmldb_application.g_f02(i) is not null then
    update ECGEXST
    set
    ECGEXDT_ID = :P65_ECGEXDT_ID,
    LEAD_CD = replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
    ST_ID = replace(htmldb_application.g_f05(i),'%'||'null%',NULL)
    where ECGEXST_ID = htmldb_application.g_f02(i);
    else
    if htmldb_application.g_f03(i) is not null then
    insert into ECGEXST
    (ECGEXST_ID ,
    ECGEXDT_ID,
    LEAD_CD,
    ST_ID)
    values
    (ECGEXST_SEQ.nextval,
    :P65_ECGEXDT_ID,
    replace(htmldb_application.g_f03(i),'%'||'null%',NULL),
    replace(htmldb_application.g_f05(i),'%'||'null%',NULL));
    end if;
    end if;
    end loop;
    end;
    The first tabular form is working fine.But for the second tabular form i am getting the checksum error.I have created a test table and checked the checksum values.The checksum values are changing.
    Here is the code of my 2nd tabularform:
    select
    x.del,
    x.ECGEXT_ID,
    x.LEAD_CD,
    x.T_ID,
    x.ENTERED_DTS,
    X.ENTERED_BY_NM,
    X.UPDATED_DTS,
    X.UPDATED_BY_NM,
    x.cks
    from (
    select
    htmldb_item.checkbox(11,ECGEXT_ID) del,
    htmldb_item.hidden(12,ECGEXT_ID) ECGEXT_ID,
    htmldb_item.select_list_from_query (13, LEAD_CD,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
    htmldb_item.select_list_from_query(15,T_ID,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 18',25) T_ID,
    wwv_flow_item.display_and_save(16,to_char(ENTERED_DTS,'MM/DD/YYYY')) ENTERED_DTS,
    au.LAST_NM || ', ' || au.FIRST_NM ENTERED_BY_NM,
    wwv_flow_item.display_and_save(17,to_char(UPDATED_DTS,'MM/DD/YYYY')) UPDATED_DTS,
    au1.LAST_NM || ', ' || au1.FIRST_NM UPDATED_BY_NM,
    htmldb_item.md5_checksum(ECGEXDT_ID,LEAD_CD,T_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
    from ECGEXT,
    app_user au,app_user au1 where au.MSPR_ID(+) = ECGEXT.ENTERED_BY_MSPR_ID and au1.MSPR_ID(+) = ECGEXT.UPDATED_BY_MSPR_ID
    and ECGEXDT_ID = :P65_ECGEXDT_ID
    union all
    select
    htmldb_item.checkbox(11,null) del,
    htmldb_item.hidden(12,null) ECGEXT_ID,
    htmldb_item.select_list_from_query (13,null,'select lead_cd , lead_cd from lslead order by display_seq ',15) LEAD_CD,
    htmldb_item.select_list_from_query(15,null,'select lkup_dsc,lkup_id from lkup where lkup_grp_id = 18',25) T_ID,
    wwv_flow_item.display_and_save(16,null) ENTERED_DTS,
    null ENTERED_BY_NM,
    wwv_flow_item.display_and_save(17,null) UPDATED_DTS,
    null UPDATED_BY_NM,
    htmldb_item.md5_checksum(null,null,null,null,null) cks
    from dual) x
    UPDATE PROCESS:
    declare
    l_cks wwv_flow_global.vc_arr2;
    j pls_integer := 1;
    val1 varchar2(100);
    val2 varchar2(100);
    begin
    -- Get original MD5 checksum
    select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,T_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
    BULK COLLECT INTO l_cks
    from ECGEXT where ECGEXDT_ID = :P65_ECGEXDT_ID;
    -- Compare the original checksum, l_cks,
    -- with submitted checksum, htmldb_application.g_fcs.
    -- If they are different, raise an error.
    for i in 1..l_cks.count
    loop
    if htmldb_application.g_fcs(i) != l_cks(i) then
    -- val1 := htmldb_application.g_fcs(i);
    -- val2 := l_cks(i);
    -- insert into test2 (val_1,val_2) values (val1,val2);
    rollback;
    raise_application_error(
         -20001,
         'Current version of data in database has changed '||
         'since user initiated update process.');
    return;
    end if;
    end loop;
    -- update ECGRSTST
    for i in 1..htmldb_application.g_f12.count
    loop
    if htmldb_application.g_f12(i) is not null then
    update ECGEXT
    set
    ECGEXDT_ID = :P65_ECGEXDT_ID,
    LEAD_CD = replace(htmldb_application.g_f13(i),'%'||'null%',NULL),
    T_ID = replace(htmldb_application.g_f15(i),'%'||'null%',NULL)
    where ECGEXT_ID = htmldb_application.g_f12(i);
    else
    if htmldb_application.g_f13(i) is not null then
    insert into ECGEXT
    (ECGEXT_ID ,
    ECGEXDT_ID,
    LEAD_CD,
    T_ID)
    values
    (ECGEXT_SEQ.nextval,
    :P65_ECGEXDT_ID,
    replace(htmldb_application.g_f13(i),'%'||'null%',NULL),
    replace(htmldb_application.g_f15(i),'%'||'null%',NULL));
    end if;
    end if;
    end loop;
    end;
    please help me in solving this.The same code its good for one tabular form and for the other it giving the checksum error.
    Thanks in advance
    phani

    Hi patrick,
    Thanks for the reply i am getting the checksum error even if i used my primary key in the select statement of the MD5 checksum.
    My primary key in the second tabular form is
    htmldb_item.hidden(12,ECGEXT_ID) ECGEXT_ID
    so i changed the process to:
    for i in 1..htmldb_application.g_f12.count
    loop
    if htmldb_application.g_f12(i) is not null
    then
    select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,T_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
    BULK COLLECT INTO l_cks
    from ECGEXT where ECGEXT_ID = htmldb_application.g_f12(i);
    -- Compare the original checksum, l_cks,
    -- with submitted checksum, htmldb_application.g_fcs.
    -- If they are different, raise an error.
    if htmldb_application.g_fcs(i) != l_cks(i) then
    -- val1 := htmldb_application.g_fcs(i);
    -- val2 := l_cks(i);
    -- insert into test2 (val_1,val_2) values (val1,val2);
    rollback;
    raise_application_error(
         -20001,
         'Current version of data in database has changed '||
         'since user initiated update process.');
    end if;
    end if;
    end loop;
    It's not possible to use BULK COLLECT to get the MD5 checksum of all >>>rows. Because the index positions in the MD5 array and the >>>apex_application.g_fxx array index will probably not match, especially if you >>>don't order or if you are on a second page.How come the first tabular form is running i used the bulk collect in the first tabular form
    HERE IS THE CODE FOR THE FIRST TABULAR FORM:
    -- Get original MD5 checksum
    select wwv_flow_item.md5(ECGEXDT_ID,LEAD_CD,ST_ID,ENTERED_DTS,ENTERED_BY_MSPR_ID) cks
    BULK COLLECT INTO
    l_cks
    from ECGEXST where ECGEXDT_ID = :P65_ECGEXDT_ID;
    -- Compare the original checksum, l_cks,
    -- with submitted checksum, htmldb_application.g_fcs.
    -- If they are different, raise an error.
    for i in 1..l_cks.count
    loop
    if htmldb_application.g_fcs(i) != l_cks(i) then
    rollback;
    raise_application_error(
              -20001,
         'Current version of data in database has changed '||
         'since user initiated update process.');
    -- return;
    end if;
    end loop;

  • HELP - Boot Checksum error

    when i boot (or try to)  i get an error that says checksum error system defaults loaded...and then i can get into bios...after i restart the computer just spins fans and nothing else happens...i dont understand this because i just built two identical computers and one of them works...my psu is 400w...
    mobo - k7n420
    cpu - athlon xp 2100+
    psu - 400w
    ram - 128ddr kingston (Value bleh...)
    geforce 4 4200
    turtle beach santa cruz

    ya - but half the time i cant get into the bios...
    the leds in the back are on chipset initializing...and it just freezes there...
    i dont get this i built the identical computer for my cousin and his works perfectly... :(

  • Checksum error

    I have been running a dbxml database for about 18 months now and recently (in last 2 weeks) I have been getting the following error message:
    dbxml- getDocument c0104
    1 documents found
    dbxml- print
    checksum error: page 4950: catastrophic recovery required
    PANIC: DB_RUNRECOVERY: Fatal error, run database recovery
    projectDatabase.dbxml: pgin failed for page 4950
    stdin:3: print failed, Error: DB_RUNRECOVERY: Fatal error, run database recovery
    dbxml- exit
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    PANIC: fatal region error detected; run recovery
    Container - DB error during database close: -30974
    File handles still open at environment close
    Open file handle: projectDatabase.dbxml
    Open file handle: log.0000025440
    PANIC: fatal region error detected; run recovery
    db_recover -c -P 0625g7Ui3 -f
    recovery 85% complete
    Running recovery does not make a difference. The only way to recover is to copy the replication client DB (which does not have these errors) to the master and restart the application. It only seems to affect random documents in the DB. All of the ones affected have not been modified in many weeks to months (they have been read but not written to in this time). Has anyone encountered this before? Does this indicate a hardware issue?
    Doug

    A check of our raid disks found parity errors at the time of the failures.
    Thanks for your help.
    Doug

Maybe you are looking for