Elements 10 doesn't see scanner Mac OS 10.9

Photoshop Elements 10 on Mac OS 10.9 doesn't find scanner (no option to get photos from Scanner).
EPSON 4870 Photo
Scanner works fine in other apps (Adobe)
TWAIN plug-in installed
Epson driver (re-)installed / up to date
Any suggestions?
Thanks

Some scanners are not compatible with the 64-bit PSE 12. Epsons have the most problems, unfortunately. There are lots of Epson customers with this problem, but so far I'm not aware of an easy solution.

Similar Messages

Networked Printer doesn't see my Mac, Running OS 10.8.2

My Envy Printer 411d all-in-one doesn't "see" my laptop (macbook pro 2012). I can print from the computer to the printer, but scanning in either direction, from the printer to the computer and vice versa is not possible. I get an error message - communications error.
The scan function shows my spouse's computer, but not mine (we both are running Mac OS 10.8.2 on MacBook Pro laptops.)
This has happened before and the only way around it, for me, was to take several hours to re-install the printer software. When you do that, HP treats you like an altogether new customer and requests re-registration and all that. We are already registered, however.
So please advise me me, I would like to know about an easier way to get the functionality I expect from this device.
Thank you.
Best,
Anne Mowat
[email protected]
This question was solved.
View Solution.

It could indeed be your router and using WEP security. WEP is not actually security as it can be broken with freeware in a few minutes.
Switch your router security to WPA with a password that you create. While you are in there, change the channel to 11 on the router's 2.4GHz mode.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Premiere Elements 3 doesn't see my DVD drives?

Hi
I have been using PE3 for a long time.
I just got a new computer running Windows 7 64 bit.
I thought that PE3 was working great until I got ready to write my production to DVD.
When I get to that point I get the "No DVD drive detected" message.
I have two DVD writers in my computer both are working normally.
I put a blank DVD in each of them but no matter what I do PE3 doesn't see them.
When I click on the drop down it is blank.
Anyone have any ideas how I can get Elements to see my drives?
If this fails, can I write the project to a folder (that seems to work OK) and then just copy the project to a DVD from there?
Any help welcome
Mike

Mike
Many considerations in your present situation, but for now I will leave you with a link to the free 30 day Premiere Elements 8.0 tryout from Adobe.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=en_us
Top of the list for getting started on the right foot with version 8.0
a. Download and install the Premiere Elements 8.0.1 Update (Patch)
b. Turn of the Background Rendering (that should be done automatically by the installation of the 8.0.1 Update) but check anyway...Premiere Elements workspace Edit Menu/Preferences/General.
c. Turn of the AutoAnalyzer Feature (See Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options)
There are users out there successfully using Premiere Elements 8.0.1.
I do not work for Adobe nor have any affliation with them. I will take another look at your Premiere Elements 3.0.2 issue and see if I can come up with any worthwhile suggestions.
ATR
Add On....If you can burn to folder successfully, take just the VIDEO_TS Folder from the saved folder and burn that to a DVD disc using a program such as Nero (Burn Video Files category, not Make Data Disc) or the free program IMGBurn (strange program but effective for the purpose) using the Write files/folders to disc category. In either case, the VIDEO_TS will be burn to the DVD disc with the right file system for DVD-VIDEO on a DVD disc.

Acrobat DC doesn't see scanner

I scan pretty regularly in Acrobat, but since upgrading to the latest version it does not see my scanner. Anyone have any ideas? I really need this to work, and right now it does not. Any assistance would be appreciated.

Hi Don ,
Could you please tell whether it is something to do with Twain Drivers of your scanner ?
If yes ,then I would like to inform that is a known issue in Acrobat DC .You could refer the following link for the same.
https://helpx.adobe.com/acrobat/kb/acrobat-dc-does-not-support-twain-drivers-on-mac.html
Or if it is something else then you can once try to remove the scanner and install it back .
Let us know how it goes .
Regards
Sukrit Dhingra

Time Machine doesn't see other macs on network

I'm just setting up Time Machine and the "Choose Backup Disk" doesn't show any options. I can see a clean hard drive through Finder, which I've set up on a Leopard G4 just for this purpose, but it doesn't appear. Do I need to set up anything on the G4 hard drive? Any suggestions, please?

Homeplugs as in Powerline? Yes, it can ABSOLUTELY affect the backup. I believe that many powerline protocols are better at one way transfer than bidirectional. Since I had a powerline set lying around, I attempted to see if I could improve on the wireless access. With the powerline adapters, I could not. I ended up reverting back to a direct ethernet connection to the Time Capsule. Can't beat 1000 Base-T.

Adobe Photoshop Elements 11 doesn't install on Mac OSX 10.10.2

Long story short: reinstalled OSX 10.10.2, lost Adobe Photoshop 11 in the process. Tried to reinstall the program via direct download via Adobe and various websites, as well tried to install via disc, only to receive the error: Installer failed to initialize. Please download Adobe Support Advisor to detect the problem. Is there anyway to get this program that I purchased to work on this? Or am I doomed to update?

DITTO...!
After this : "
How to perform a "clean install" of Flash Player in Mac OS X
I got this message :
Geez, what's the problem here...?

Mac Doesn't See External Drives on WinPC, PC Doesn't See Mac

I'm trying to transfer some files that are on an external drive connected to a Windows PC to my new Mac Pro.
On the Mac, in Finder, I can see the PC, but I can only see it's internal Hard Drive; the external drive don't show up in Finder.
On the PC, I'm not seeing the Mac Pro at all. In Tiger, it seems to me, there was check box under the "sharing" preferences for "Windows sharing," but I can't find that in Leopard. So, the PC doesn't see the Mac at all.
It does suddenly dawn on me that I could just detach the external drive that I'm trying to copy from the PC and plug it into the Mac, but... that would be too easy. I would still like, at least, to be able to see the Mac from the PC.
Any suggestions?
Thanks,
--PS

My recommendation is to format the drive as FAT32 via OSX's Disk Utility, this will allow you to read/write from both the Mac and PC environment.
Like I said, I don't think that's the issue, because my MacBook shares everything with the PC just fine (except the externals on the PC). And of course, I don't want to reformat the external drives until I've got the data off of them.
I just checked, and Tiger has a "Windows sharing" checkbox under the "Sharing Preferences" that allows the MacBook to show up in "My Network Places" on the PC. The problem I'm having is getting the MacPro to show up on the PC; the Pro has Leopard, and there's no "Windows Sharing" in Leopard that I can see.
Thanks again,
--PS

PSE 12 for Mac doesn't see my scanner

PSE12 for Mac refused to work with my scanner. In preferences I checked "Additional Plug-Ins Folder" and selected the Optional Plug-Ins Folder which contains the TWAIN.plugin. I restarted the PSE and the File> Import... command remains dimmed out. Tried resstarting the iMac and PSE still doesn't see the scanner. PSE 11 used to recognize the scanner right away. I hope this isn't a permanent change in PSE 12!
Thanks for any help!
OS X 10.8.5
Canon 8800F Scanner
TWAIN.plugin v12.0.4x001

Hi Barbara - I reinstalled PSE 11 on my iMac and verified that it still works with the Canon 8800F scanner. I also installed PSE 12 on my Macbook Air, moved the Twain plug into the right spot, and found that it doesn't see the scanner either. Preview on the Macbook does see the scanner OK so it's not a connection problem there either.
I noticed that the Twain plugins in PSE 11 and 12 are the same version but different sizes. The get info windows for the two versions of PSE on the iMac (Kahawalu) and the PSE 12 on the Airbook (Niumalu) are below. Would you be able to let me know the PSE 12 Twain file version and file size that is working with your Canon scanner? It might help narrow this thing down.
Thanks again for your assistance! William

Help! Acrobat XI Pro for MAC doesn't see my HP 4780 scanner.

I know the scanner part of my HP C4780 works, both with Windows Acrobat 9 Pro and with all the other scanning functions on the Macbook Pro.
I don't know what to do. This is one of the major functions I use Acrobat for, and now I can't get it to work.
Help!

Hi Barbara - I reinstalled PSE 11 on my iMac and verified that it still works with the Canon 8800F scanner. I also installed PSE 12 on my Macbook Air, moved the Twain plug into the right spot, and found that it doesn't see the scanner either. Preview on the Macbook does see the scanner OK so it's not a connection problem there either.
I noticed that the Twain plugins in PSE 11 and 12 are the same version but different sizes. The get info windows for the two versions of PSE on the iMac (Kahawalu) and the PSE 12 on the Airbook (Niumalu) are below. Would you be able to let me know the PSE 12 Twain file version and file size that is working with your Canon scanner? It might help narrow this thing down.
Thanks again for your assistance! William

Photoshop elements 13 doesn't recognize my Epson scanner

I have a Epson Workfoce 545 wireless printer/fax/scanner and newly installed Elements 13 doesn't recognize the scanner. Do any of you in this community have a suggestion?

The scanner is NOT present in the network. The "all in one printer" that the scanner is a part of is listed, however.
Dave
From: bridge_mastero <[email protected]>
To: David Gross <[email protected]>
Sent: Wednesday, February 18, 2015 9:09 AM
Subject: Photoshop elements 13 doesn't recognize my Epson scanner
Photoshop elements 13 doesn't recognize my Epson scanner
created by bridge_mastero in Photoshop Elements - View the full discussionHi , Please see in network that your scanner is present in the network list or not ?type Network on file explorer. https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-7206081-729762/900-234/networ k.png If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7206081#7206081 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7206081#7206081 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Scanner (Epson Perfection 1670) doesn't *see* document on flatbed

My Epson 1670 just started exhibiting where it scans but doesn't see a document. I took it off the hub and connected directly but no difference. It doesn't appear to be the bulb as I can see light move along as it previews.
All I get is an all white image.
THis scanner has its own power cable. It just worked a few days ago. I'm not sure what I could of installed recently that would cause this.
Any Ideas?
Ed

I just purchased a MacBookPro 17" and moved my Epson 1670 optimistically to the new laptop.
I HAVE THE IDENTICAL PROBLEM (a blank/white document as the scanned image)! Epson has been less than useless (so far).
On the Epson website the following (similar, but not exact problem) FAQ is answered. I cannot understand what they mean. Does anyone have any understanding or, better yet, a solution to this problem.
Epson FAQ:
Epson Perfection 1670 PHOTO
Q:
I just installed the Epson Scan software for Mac OS X 10.4.x, but it will not run. It just pops up in the Dock and then disappears. What should I do?
A:
If you're using a Power PC or Intel-based Mac with OS X 10.4.x, your hard drive may be partitioned for Mac OS Extended (Case-sensitive/Journaled) or Unix File System. These formats are not supported. You will need to use Mac OS Extended or Mac OS Extended (Journaled) when formatting the partition.

I have prepared a book on iPhoto, ready to buy book. There is amessage above about half the pages that says "drag photo to place in background" as if it doesn't see the picture there. Its a MAC 08X 10.6.8 and iPhoto '08 7.1.5. I have made iBooks before b

I have prepared an 82 page book on iPhoto, ready to buy. There is a message over about half the photos saying "drag photo to place in background" as if it doesn't see the photo already there. I have spent over 20 hours getting to this point and can't bear to start over! Its a Mac 08X 10.6.8 and iPhoto 08 7.1.5. I have made other iBooks on this software and computer with no problems. Help please!

Look for a page that has a similar layout:
The one photo per page layout is the easiest to miss. Just click on a background color to remove the problem.
OT

Migration Assistant problem? : New iMac's iTunes doesn't see the catalog or playlist of my old Mac's songs on an external drive

So I just migrated from a 10.7.5 iMac 27" from 2009 to 10.9.4 on a 2013 27" iMac with Fusion Drive.
I don't use Time Machine. There are no backups involved here.
Used Ethernet. Only took 20 hours... (BTW, it stayed on "less than 1 minute left" for like 12 hours but luckily I was away and just left it going in hopes it would work... and it did!)
Anyway, back on my OLD iMac, I kept all of my songs on an external drive because my internal drive was too small. So iTunes looked at that drive for the music it was playing. I turned that drive off, even disconnected it, during the migration process because I thought it was confusing it during the first attempt which took 10 hours and nothing happened.
So now it worked, finally. On my new iMac, running Mavericks, I now have two user accounts... the one that was set up when I started the computer the first time, and the new one that transferred over via Migration Assistant. No problem. I can live with that. The only thing is, I would still think the old XML files and library stuff would migrate over... but iTunes doesn't see it. When I open up iTunes, in *either* account, iTunes behaves as if it's brand new. Repeat: the old and new account on the new iMac, both, do not see an old iTunes library which IS on the old iMac. Only the music is on the external drive from what I understand.
I've done this before so I know it's possible. I remember upgrading a long time ago and got iTunes to see my old library... even though some of the music was no longer there. It just puts "!" marks wherever there is no link. I was hoping that that's what I would find when I launched iTunes, but no luck. Even connecting the old hard drive to the new Mac (via USB) doesn't make iTunes all of a sudden "see" the old library. That data doesn't seem to be there. It didn't transfer over. Did it not transfer over because the songs weren't on the internal volume? Should I have left my external hard drive on?
So.... now that I've spent almost 3 days total trying to get this to work, and everything is running... I don't want to have to start over in order to get iTunes to work. Is there a way I can just drag over some XML files or something from the old computer? I don't want to lose all of the ratings and personal notes and everything.
I should add also that I have like only four songs I've ever actually bought through iTunes. I'm still a bit old fashioned and buy CDs and rip them to Apple Lossless. So I hope it's not an authorization / reauthorization issue because I have like 1400 albums ripped.
Thanks in advance for any help.
--Jeff

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

PhotoShop Elements 10 doesn't recognize my slide scanner

I have a Minolta Dimage Scan Dual III for my 35mm slides. The drivers are updated for Windows 7. But PhotoShop Elements 10 does not see it let alone recognize it's existence. My Paint Shop Pro Photo app. sees it and works with it.....as does my old, old Paint Shop Photo Album program. But not my brand new PhotoShop Elements 10. It sees and works with my HP All-in-one scanner/printer but not with the slide scanner. What is the problem here? Any suggestions?

Yes. I had downloaded this info. back when I purchased my Win 7 64 bit desktop PC last year and used the updated driver because, of course, Minolta was no longer doing that. I found these comments regarding the legacy TWAIN driver that is buried in PhotoShop Elements 10 but is not useable unless copied to another folder in the program files. I performed this action and much to my pleasure.....it worked. My PSE 10 now works perfectly with my Minolta slide scanner. I discovered this after I submitted my question to the forum earlier this evening. AND I really appreciate the answer which validates my actions. I'm up and rolling again. Thanks again.

Mac Pro doesn't see third monitor

Guys:
My Mac Pro doesn't see all three of the monitors that I have hooked up...what am I doing wrong?
I previously came to you for your expert advice about video cards...I went and upgraded my Radeon 4870 which was running two monitors (Eizo and NEC) to a ATI Radeon 5870 in order to run three monitors (my new Cintiq)
When the Cintiq was not hooked up yet, the Mac saw the Eizo and NEC. When I connected the Cintiq...the Cintiq and the NEC show up but not the Eizo.
I went and upgraded the video card so I could run all three monitors because I didn't want to plug and unplug the Cintiq whenever I needed it. I believe I did my due diligence as far as research was concerned to ensure this would all work together...I'll be pretty bummed if this configuration can't do three monitors not to mention the financial cost.
Any help would be appreciated...as always.
Thanks!

I read your links, if I understand correctly, it may work with Dual Link DVI adapters?
My monitor connections are:
Eizo: DVI with the cord that came with the monitor (unsure if DVI single or dual link)
NEC: VGA to mini display
Cintiq: DVI to mini display (think it is a single link DVI)
Thanks!...so what do I need to go buy?
Here's a partial answer (need more info to answer about single vs. dual link, more about that later).
In the Mac Pro (Mid 2010)... document I referenced above there's a key note:
Note: The Apple Mini DisplayPort to Dual-Link DVI adaptor and Apple Mini DisplayPort to VGA adaptor are considered active adaptors.
So if you get the apple mini-displayport to VGA adaptor that will count as one of the active adaptors. I use one of those incidentially but I am not sure but it may be that all mini-displayport to VGA adaptors are consider "active".
Now for the single vs. dual link DVI question. It depends on the max resolution of those monitors (or the max you want to run them at). Single link DVI has a max resolution of 1920 x 1200, while dual link DVI can display a resolution of 2560 x 1600. So that's why I cannot answer this part of your question (you didn't specify the max resolution). If you only need single link active adaptors they will certainly be a lot cheaper than dual link.
Also note, you should only need two active adaptors on the card to support 3 monitors. So only one of the remaining connections needs to be an active adaptor. The other can be passive (much cheaper).

Elements 10 doesn't see scanner Mac OS 10.9

Similar Messages

Maybe you are looking for