Elements 10 function

can elements 10 do perspective function of crop or can it be upgraded to do this function like c3 etc?

It can do "something close" -- you move the sliders for vertical and horizontal perspective independently to bring the image into alignment with a supplied rectangular reference grid.
I use a free plugin that works more like what you describe -- place the 4 corners of a reference rectangle on the points of the image that should be a rectangle.
Ken

Similar Messages

Use of text element in function module

hi friends what is the use of text element i.e list headings, selection texts,text symbols in a function module. where a can see these things after giving some text into it and activated.
                                    kumar.

hi
<b>Text Symbols</b>
A text symbol is a named data object that is generated when you start the program from the texts in the text pool of the ABAP program. It always has the data type c. Its field length is that of the text in the text pool.
Text symbols, along with the program title, list headings, and selection texts, belong to the text elements of a program. Text elements allow you to create language-independent programs. Any text that the program sends to the screen can be stored as a text element in a text pool. Different text pools can be created for different languages. When a text element is changed or translated, there is no need to change the actual program code. Text elements in an ABAP program are stored in the ABAP Editor (see Text Element Maintenance).
In the text pool, each text symbol is identified by a three-character ID. Text symbols have a content, an occupied length, and a maximum length.
Examples for text symbols in an ABAP program:
ID
Contents
Occupied length
Maximum length
010
Text symbol 010
15
132
030
Text symbol 030
15
100
AAA
Text symbol AAA
15
15
In the program, you can address text symbols using the following form:
text-###
This data object contains the text of the text symbol with ID ### in the logon language of the user. Its field length is the same as the maximum length of the text symbol. Unfilled characters are filled up with spaces. You can address text symbols anywhere in a program where it is also possible to address a variable.
If there is no text symbol ### in the text pool for the logon language, the name text-### addresses the predefined data object space instead.
You can also address text symbols as follows:
... 'textliteral'(###) ...
If the text symbol ### exists in the text pool for the logon language, this is the same as using text-###. Otherwise, the literal 'textliteral' is used as the contents of the text symbol. This is only possible at positions in the program where a variable can occur. You can create a text symbol for any text literal by double-clicking the literal in the ABAP Editor and replacing the literal with the text symbol.
You should use text symbols in your program whenever they need to be language-specific - for example, in a WRITEstatement.
If you program a list whose layout depends on field lengths, you should be careful, since the field length of text symbols will be different in different languages. You should therefore set the maximum field length of the field symbol so that there is enough space to translate it into other languages. For example, the English word 'program' has seven letters, but its equivalent German translation 'Programm' has eight.
The following example shows the use of text symbols in WRITE statements.
SET BLANK LINES ON.
WRITE:   text-010,
       / text-aaa,
       / text-020,
       / 'Default Text 030'(030),
       / 'Default Text 040'(040).
If the text symbols of the above screen shots are linked to this program, the output looks as follows:
Text symbols 020 and 040 have no text symbols. For text symbol 020, the system displays a space. This is only displayed in this case because the blank line suppression has been turned off (see Creating Blank Lines).
regards
ravish
<b>plz reward if helpful</b>

WBS Element and functional area/location

Hi All Gurus here,
Can a WBS element link to functional area/location(object in PM)? or the other way round, which functional area/location link to WBS element?
Best Regards,
Elvio

Dear Elvio,
Please go through the information in the link,reward if useful.
http://projectsystems.wordpress.com/
Regards,
Naveen Dasari.

Photoshop Elements stopped functioning properly. I am unable to reinstall 64bit version.

Photoshop Elements was not functioning properly, so I tried to fix but it uninstalled and I am unable to install 64-bit version.

Do you receive a specific error message? Which operating system are you using?

Photoshop Elements Editor Function Won't Work

After upgrading to Windows 7, the Editior function on my Photoshop Elements 6 program stopped working. I have tried the following: Run as Administrator. No success. Compatibility Troubleshoot. No success. Reinstalling. No Success. Anyone have any suggestions?

Please try the below solutions-
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
3: Try launching with anti-virus off or removing PSE from conflicting list.
4. Try launching directly from the exe of editor and organizer and see if it gets launches-
Editor - c:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe

Elements keyword functionality

I have been using Elements 6 and really appreciate the keywording function; in that you can create keywords as top level or nested, drag them to a selection of photos and then just click on the keyword in the same panel and view only the photos with that keyword. I am disturbed that this functionality does not seem to be available in bridge CS4. I see that I can create nested keywords in one panel and then click on them to assign them to a selection of photos, and I see that the assigned keywords show up in a list in the filters panel, but are not nested. I understand that I can click on the keyword in the filter panel and see the photos with that keyword. This seems cumbersome to me and especially surprising considering that the elements system is so elegant, why it is not used in the supposedly more sophisticated program. I hope someone can point out to me that I am just missing something.

Elements uses a a table for keywords which makes what you describe easier to acomplish. With Bridge the keywords are written to each photo. So it would seem to a non-programer like me what you are asking for would be more difficult.

WBS element hirearchy function module

Hi All
Is there any function module in R3 that accepts WBS element as input and gives its hirearchy? I would like to know the function module name that accepts WBS elements in the internal table as input and gives all associated hirearchies as output in the internal table.
Please advise
Thanks
Vennela

Hi,
we can see WBS Hierarch from cj20n tcode.
Can you please give us an idea about what you are trying to do with WBS, extracting into Bi or other use in R/3 itself.
Regards,
Vamsi.

Does Photoshop Elements 4 function in Leopard on Intel Mac?

I am aware that it is not at all supported by Adobe, but has anyone been successfully using Photoshop Elements 4 on Leopard and Intel macs of any sort?
thank you

I had PE4 installed and it was painfully slow and laggy that's why I tried pixelmator and I was so surprised at how wonderful it was.
mcgrover wrote:
I'm repeating a little from above, but at the Apple store they told me PE4 was the latest and most compatible, but when I called Adobe support, the Adobe guy told me there were compatibility issues with PE4 and Leopard, though note that some posters here seem OK with 4 and Leopard. I suggest talking to Adobe support, but they may tell you PE6 is the fix for Leopard, in which case why does 4 work with Leopard? When I told the Apple store that Adobe said that 4 had problems with Leopard, Apple said that Adobe never communicated that to them. I have no more to offer as I don't have 4 to try it. I can say that 2 is dead in the water. Still looking at Pixelator.

Web Elements Dynamic functionality

Hello Jamie,
I am in great hopes that you wil help me overcome my problem in regards to webelements. I've been going through lot of WE samples for crystal and have seen them working well. However I have noticed that most of the examples have hard coded the data within. Currently I am working on a project which has a requirenment to display interactive and dynamic content through crystal, I am using WE functions to achieve the functionality.
Example: I am trying to build a checkbox which should display dynamic content based on the users promtp selection. Like if a user selects country then the chkbox should display all the countries from the DB. The syntax for the chkbox goes something like this:
Stringvar values:= "1|2|3|4";
Stringvar displays:="some values";
stringvar defaults:=(?user prompt)
Wecheckbox("user prmpt",values,displays,defaults,rest of the parameters..........)
In this if i hard code the value the checkbox works fine.
My questioni is, how do I program this to show me the dynamic content in the report, I've been struggling a lot on this issue but unable to figure out. I want my syntax to be like:
stringvar values:="|";
stringvar displays:=({My database table name or formula})
stringvar defaults:=(?user prompt)
I have tried doing the above but I receive only one value or rather only the first entry of the database along with few array error messages,
while declaring the stringvar for values and displays,how should I specify the database entries, I cannot hard code all the country names here and tht too which are dynamic, it could be country today, may be produt tomorrow and so on....Also how would the value variable would know the count of countries
Please let me know a solution out of this. I have more confusions in regards to WE functions, I would post my rest of the questions on a different thread.
I would appreciate your help on this.

hello,
as you've found out if you put the functions on the report header you get the first record...on the report footer you get the last record. webelements are the same as crystal formulae in that they take the records available to them at that time.
first off, have a look at the webelementsDCP (dynamic cascading prompt) report...this is an example of a report using dynamic / database driven values for the functions.
in order to get a list of values from your database, you need to roll them up into a long text string while the report is reading the records from the database. in crystal reports, this happens top to bottom on the report. in the subreports in the DCP report, values are rolled up and then passed to the main report via a shared variable.
if you put a formula on your report details section that reads something like
whileprintingrecords;
stringvar s1:= s1 + + "|"
you will see the values roll up.
if you have a webelements report where you have the option of putting the controls at the report footer, then there's not as much work involved.
if you need the controls at the top of the page then you can use the technique like in the DCP report. look at the "select..." formulae on the webelementsDCP report and you will see that they use the shared variables created in the subreports.
cheers,
jamie

Does Photoshop Elements 11 function with Windows 8.1 operation system? How to get it properly installed?

I have a problem with Photoshop Elements 11, which i bought last week. Installing was completed according the instructions. When I started to use the program my one year old HP-computer with Windows 8.1 informed that there a failure in the Photoshop program and the did not open.

Running 11 on two HP computers running win 8.1 - one older desktop and a new laptop.
Can't say what your problem might be.

Will Adobe Premiere Elements 8 Function Properly on MS Windows XP Pro x64 editionV2003 SP2

I am running
MS Windows XP
Professional x64 edition
V2003
SP2.v4666
Dell Precision PWS670
Intel Xeon CPU 3.20GHz
3.19GHz. 3.93 GB of RAM
I import SD video from Canon FS 200
Considering the hardware, software and camera I have will "Adobe Premiere Elements 8" allow me to export edited product to use as streaming video in Dreamweaver 8?
Thank you.

With a Duo-core Xeon, you should be fine with SD material.
With the MOD files, this ARTICLE and its links, might prove useful. Be sure to follow all the links to other articles, and especially see the replies in those by Chris at JVC, as he knows those files intimately, and uses PrE to edit them.
As for OS, Win7 would be the way to go. It seems to have proved to be better than Vista, in almost every instance. The question is then - 32-bit, or 64-bit. Things to think about: PrE is not yet a 64-bit program, so cannot fully take advantage of a 64-bit OS. Win7-64 still seems to have some driver issues, but the people writing the drivers are catching up, and there is hope that by SP1, those will no longer be an issue. Also, one needs more RAM installed, to take advantage of a 64-bit OS, and your MoBo probably cannot take any more RAM. Also, the speed and connection of the RAM can be important, and your BIOS (and MoBo sockets), probably cannot take advantage of this newer RAM. If you are not planning on upgrading the MoBo and your RAM, then you will probably be much happier with a tuned Win7-32-bit OS. However, some programs are being released for 64-bit ONLY, like PrPro CS5. They will not run on a 32-bit OS. With the 32-bit OS, you do lock yourself out of some programs. It becomes a tough call, and only you can make it.
Good luck,
Hunt

Photoshop Elements Stacking function not working

I have downloaded and installed Elements 12 and when I opened it I discovered that it would not stack a series of pictures - gave me an error message saying "create stack failed." Also when I tried to crop a pictures, it did not save it to the Catalog. It did save to the hard drvie but did not put it in the Catalog. I am wondering if this copy of the program has a bug in it?
M L Brown

Most probably that bug:
http://forums.adobe.com/thread/1328850
See the workarounds you can try.

PS Elements Crop function is defective!

HI all,
When I crop a photo in PSE 13, the saved version has a black bar at the bottom (or side) of the photo. It looks terrible! Why is this black bar being saved as part of the photo? Is it just something I'm not doing right? I only bought it today, but the cropping was very self explanatory..
Ant advice would be appreciated

Hi,
Are you cropping in the organizer or in the editor?
If you are cropping in the editor, are you using crop pre-selection?
Are you moving the crop outside of the image?
As there more than one way to crop, it might help if you describe what you are doing. A screen shot of your image just before you commit the crop might help.
Brian

Layout - not recognize the element when i call the function write_form

Hi experts,
I got a layout(se71) that not recognize the element that i add in the MAIN window when i call the layout from a program.
what could it be?
i add the element in se71.
any help will be appreciated.
Michal.

Hi!
the write form that u are calling should be as below....
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
      element                  = 'ELEMENT'
      window                   = 'MAIN'
    EXCEPTIONS
      element                  = 1
      function                 = 2
      type                     = 3
      unopened                 = 4
      unstarted                = 5
      window                   = 6
      bad_pageformat_for_print = 7
     spool_error              = 8
      codepage                 = 9
      OTHERS                   = 10.
IF sy-subrc <> 0.
    MESSAGE 'MAIN window not called properly'(006) TYPE 'E'.
ENDIF.                               " IF SY-SUBRC NE 0
in the layout see if the code there with data element is proper as...
/E ELEMENT
   &var&
Also this write_form FUNCTION MODULE should be called b/w OPEN_FORM and CLOSE_FORM Function Modules.
Regards

Elements 11 Divide Scanned Photos Function, can it work with scanner cover open?

I do a lot of scanning of where three items fit on the platen at one time. In the previous versions of Element this function worked, not automatically, but it worked with the cover open or closed, and it is much faster to scan with the cover open.
Is there some way I can adjust the sensitity of this function to be more sensitive or less senstive to backround color?
Thanks in advance,
jj

Hi ,
There is no option of changing sensitivity of Background color option in Divide scan photos In E11.
But one thing - Divide scanned photos works based on image resolution, so if your scanner output resolution is high , it works too sensitive and if output resolution is low it works less sensitive.
thanks,
earth-star

Elements 10 function

Similar Messages

Maybe you are looking for