Elements 10  - How do I get video media imported into the timeline to be visible?

When any video media is imported into Premiere elements 10 I get a white screen (i.e. no video) and only the audio plays.   It does not matter if the files are Mpeg4 or mts.   I have routinely used Elements 9, 10 & 11.  This is a new 64bit machine and this is the only time this has occurred.

environmental analysis
If you are one of those Premiere Elements 10 users whose computer works with a NVIDIA video card, please read through the thread in which I have been compiling "what has worked for others" related to this Premiere Elements NVIDIA video card display problem. If you have NVIDIA video card and you can find it mentioned in the thread, please try the roll back information given by another version 10 user with the same card as yours.
http://forums.adobe.com/thread/1317675?tstart=30
We will be watching for your results.
Thanks.
ATR

Similar Messages

  • How can I get video media .MOD into Premiere El. 9?

    Videos from my Canon 7d camera and from my Canon ADCHD camcorder (both SD cards) are .MOD files. I open Premiere Elements 9 and click GET MEDIA and it won't recognize the files. It says it cannot open the videos because:
    "your system does not have the required compression/decompression codec installed."
    When I bought this software a service rep assured me that it would take .MOD files. Why weren't these codecs installed with the program? How can I get these videos to work with Premiere Elements 9?

    First, I apologize - I meant .MOV files, not .MOD files. I did download the Quick Time update. Then other problems arose:
    Per an e-mail from a forum member, I downloaded an update of QuickTime, which should let me open .MOV files.
    Inserted an SD memory card from my Canon camcorder. I selected FLASH, ADCHD...  Then GET MEDIA.
    Thumbnails appeared labeled MOV001.MOD and ascending numerical order. Then Premiere stopped working and a message appeared: 
    There is no disk in the drive. Please insert a disk into drive\device\Harddisk1\DR1
    So I must have picked the wrong device category?
    I couldn't close the error message or the software so used the Task Manager to get out of it.
    After a couple more tries I gave up.
    Then I tried my DSLR Canon 7d CF memory card. Selected NEW FILE. Clicked on "edit settings" and chose DSLR > GET MEDIA. The downloader began. Up came another message.
    Download failed because the files are TOO LARGE.
    These are CR2 (RAW) PHOTOS. Do I have to change the format to .jpg or .psd in Photoshop Elements first?
    Any suggestions?

  • How do I get my tabs back into the main window?

    I've had a problem with an add-on displaying a small extra window every time I open a session for some months now: I know you're supposed to try disabling and re-enabling every add-on you've got to find out which one is responsible, but this is a work computer and with all the add-ons I have, it would take too long, so I've just closed the extra window every time and got on with my work. However, for some reason today my forty-odd tabs have all opened in the small extra window, which has no tab bar, navigation bar or menu button. How do I get my tabs back into the main window of Firefox, or alternatively get that window to behave like a normal Firefox window so I can use it?

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    *http://kb.mozillazine.org/Multiple_profile_files_created
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder

  • How can I get my Nook purchases into the NOOKBOOK Library area on my IPAD mini?

    How can I get my Nook purchases into the NOOKBOOK Library area on my IPAD mini?

    Not possible. iBook will not read or even be aware of the
    Nook books.
    Also answered in your other post
    https://discussions.apple.com/thread/2738595?tstart=210

  • My iTunes downloads were made using my old gmail address.  I had to quit using this email address as it got hacked.  I created a new gmail account.  How can I get my iTunes downloads into the new gmail account?

    My iTunes downloads were made using my old gmail address.  I had to quit using this address  as it got hacked.  How do I get my iTunes downloads into my new iTunes account that was created with a new gmail address?  In my old iTunes account (with the old gmail address,  I can't 'update' my email address or even 'add an alternate address' as I had already created this gmail account and inputting the new address into iTunes gives me the 'pop-up' that 'this account is already in use.'   Advice please!

    Good luck. It took me weeks to fix this when I had to do it. Your old ID branches out in lots of places. You may have to delete app and get them again, at least that is what Apple told me. Plus, all of your settings on your iPad that required any ID, will have to be changed. My old ID kept showing up in different places for weeks. Changing it on Apple.com is just the beginning.

  • Media put into the timeline requires rerendering

    Hi. I've never had this problem before and I suspect it might have to do with either updating to Tiger and/or Quicktime 7 recently. When I drag media (video clips) from the browser into the timeline, the red render lines appear above the clips and require me to render the clips before I can view them. What am I doing wrong or what do I need to do right?
    Thanks...

    > When I drag media (video clips) from the browser into the timeline, the red
    render lines appear above the clips and require me to render the clips
    Your Sequence Setting don't match your material.
    Right Click on a clip in the browser then look at
    Properties > Format
    Look in the Compressor line and check the exact format of your clip.
    Then go to Easy Setup and make that the same as your clip's format.
    Open a NEW sequence (this will now match your Easy Setup) and drag the clip into the new sequence's Timeline.
    Andy
    G5 Quad 8GB. 250+500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • How do i reopen a project so it displays in timeline in fce?or how do i load  a saved project into the timeline?

    having saved  project, closed it.
    but then when reopening FCE although the NAME of the project appears in tabs, the  CANVAS and TIMELINE do not appear.,nor after a couple of days of
    trying (my limit with newstuff)  I cannot get the project into the timeline complete so i can start to fine edit etc.
    do i have to reload each clip again? ie start over or is there a way of reloading the closed project so i can go from where i left off?
    hope the cavalry can help....

    The Sequence icon looks like this:
    You may have to trash your FCE Preference files.
    This will reset FCE to it's default installed settings.
    Searching this forum will tell you how.
    Al

  • How do I get a logo (jpeg) into the Pages header?

    I can´t manage to get a jpeg into the papers header. How do I do?

    When the dialogue box pops up to Insert Page Number, ignore it, and select Media from the Toolbar, or select Insert > Choose >

  • How can I get Lightroom 5.7 into the "Open With" menu on an external Harddrive?

    Using Lightroom 5.7, I imported photo images as a .dng.  I edited the images in lightroom.  Then I dragged the file from the local Disk (C) to an external Hard drive (left panel of Library).  When I look in the External harddrive, I would like to see thumbnails of the images. I think I would like to open the images in Lightroom but I cannot get Lightroom into the "Open With" dropdown menu.  Photo shop, Adobe Reader and a bunch of Windows photo editing stuff is in there but I cant seem to get Lightroom into this menu. 

    The "open with" command is used to open images that are already in Lightroom in another external editor such as Photoshop or Photoshop Elements or some other photo editing program. And you are opening an image that you are already seeing in Lightroom. So Lightroom won't be on the list and cannot be on the list because you are already looking at the images in Lightroom.
    Concerning the images that you moved to the external hard drive, if you actually moved them using Lightroom then you should be able to see that external hard drive in the library module library tree and be able to choose that folder. Then the images will be in Lightroom and you can continue working on them. There doesn't need to be any "open with" to do that. If you moved those images some other way, please explain.

  • How do I get iTunes 11 back into the taskbar player?

    I had the taskbar player for iTunes 10, and it was perfect. I'm using Windows 7, and now that I've updated to iTunes 11 I can't get the taskbar player back.
    The mini player is just not at all as useful as the taskbar player is, and I want the taskbar player back!! How do I get it to do it? I've followed all the steps that worked for iTunes 10.
    All the threads in the forums are years old, and not helpful to me.

    It's worth noting that the program ONLY minimizes to the taskbar player when you use the minimize button in the upper toolbar - a ridiculous thing now, since it didn't have a problem realizing that I wanted it to minimize to the taskbar player in 10 even when I minimized it by clicking on the program icon in the taskbar.
    Is it always going to stay this finicky?!

  • How do I get internet addresses typed into the Run dialog box to open in Firefox and not IE?

    I'm a mechanic and my parts supplier brought me this promotion USB button which takes me directly to their special offers page.
    Basically it's a preprogrammed USB keyboard that presses the Windows key + R, then types their internet address in.
    However, even though Firefox is my default browser, this link opens in Internet Exploder. IE is verboten on any PC I use!
    How do I set the PC to use Firefox for EVERYTHING, including/especially addresses typed into the Run command box?
    WIndows Vista on this one (I know, it's not my choice, it came with it).

    Thanks. That fixed it. I use WIndows XP on all of my own machines - but this one is the boss's.
    On XP, once you set a default program, it stays like that. Vista seems to have a mind of it's own.

  • How do I get videos to play in the browser?

    I get sound when I try to play a video in the browser, but I don't get any video playback. A lot of the time, I just get a spinning circle or whatever "processing/wait" icon the video player uses. I am running FF 33 for Android on an LG Optimus G Pro. I have Ghostery and AdBlock Plus installed, but Ghostery is disables, because it's practically unusable on this phone.

    Is it a Flash video? as you likely need the old Flash 11.1 plugin from Adobe.
    https://support.mozilla.org/kb/how-do-i-watch-flash-videos-firefox-android

  • How do I get missing photos back into the Organizer?

    Just a few days ago I had about twelve folders of photos in my Organizer. Now I have only two folders that have content. When I click on the other ten folders I see this message in the Media Browser, "No media to be displayed."
    I have both Adobe Premiere Elements 11 and Photoshop 11 which I got three weeks ago. The only thing new on my computer is the software that came with my Nikon camera - NX2 - a photo storage and photo editing program. My photos are still in my Windows Pictures program.

    You must have moved files outside of Organizer using Explorer or Finder.
    Try using File >> Reconnect >> All Missing Files
    otherwise use
    File >> Get Photos & Videos >> From Files & Folders
    Then navigate to the new location.

  • My screenshots have stopped going to my clipboard. How can I get my screenshots back into the clipboard?

    I use Command (⌘)-Shift-4 to grab screenshots of diagrams to make flashcards with on a daily basis. But now my screenshots have stopped going to my clipboard - and they don't paste into my flashcards.
    Dropbox popped up and asked me if I wanted to use it to save my screenshots and I said No Thanks, but then right after that my screenshot function stopped working. I can still save shots to my desktop, but I'd love to not clutter my desktop.  The screenshots are not going to dropbox either, I checked.
    Can someone tell me how to get my screenshots to go back to going into my clipboard?
    Thanks!

    Thanks Lanny! I actually typed in the wrong command into my question - I meant to type what you mentioned. But I did end up figuring it out: for some reason the shortcut to screenshot into my clipboard changed. I was able to restore all my shortcut commands back to default and it worked again!
    Thanks!

  • If I import a CD onto iTunes with tracks that have more than one person on (eg Rihanna ft Drake), it puts these tracks in a separate album. How do I get them all back into the same album?

    It's done it with a load of cds, so then I can't even get the album artwork to work. Please help! It's starting to bug me haha

    In iTunes select all songs you want in the same album, right click the selection, choose "get info", type the album name in the album field, click OK.

Maybe you are looking for