Elements 10 - How to mimic offset/gamma exposure/exposure?

Similar to what can be done in the Photoshop CS edtions?
What I am trying to do is to create a movie-like desaturated photo effect. In Photoshop CS5 this is done by desaturating, and then by adjusting the Offset in the Exposure dialogue box.
Is there a way of mimicing this in Elements? I can't really see a way of increasing the contrast and boosting the colours at the same time in the way that the CS editions do.
Thanks in advance.

Here's an example:
Before:
After:

Similar Messages

Does Elements have the Photoshop Exposure adjustments for Gamma, Exposure and Offset, and where? Is Gamma missing?

I have been a photoshop user since version 3, and am considering switching to Elements 13, as I am not a professional, but do this for home pictures. I found that the Exposure Adjustments setting is fabulous, where I can adjust Gamma, Exposure and Offset, and the the Shadow and Highlight is also great. Does Elements have an EXPOSURE (Gamma, Exposure and Offset) adjustment tool, or something close, and if not the same, how inferior? Same Question for Shadow/Highlights.

As to saving edited items in ACR Edited formats or as a JPEG, unless I Open Image and save the file as a JPG, the edited RAW image is not a portable file, as only Photoshop or Elements will compile the edits from the embedded information. I do see that moving from RAW to Elements Normal mode, I can save the files and do other forms of editing, but I may have to give up a 16bit image for an 8 bit image to do any editing in normal Elements.
When you are using only the 'Done' button with a jpeg without opening and saving in the editor, you have written the settings to the metadata without altering the pixel values. In my own case, That's enough for 80% of my shots. That means: non-destructive editing (the original is still available), parametric editing, the settings are saved, can be used for the next picture and take minimal disk space. You don't need to keep a version set. On the other hand, only Adobe software can read it. Those edits in ACR are calculated in 16 bits even if jpeg is only 8 bits.
On the other hand, if you open the file in the editor, you have the choice to open the converted version in either 8 or 16 bits. Of course, if you want to save it in 16 bits, you'll save in psd or tiff.
What do you know about Photoshop's ImageReady. It appears to offer simpler interfaces to normal Photoshop.
Sorry, I don't know anything abut ImageReady...
As to Elements, it appears that many of the more sophisticated image adjustments that exist in Photoshop are there, but in an 8 bit depth, buried in their different menus.
There are a lot of discussions about 8 or 16 bits depth in Elements. The main idea is that you can't use layers in 16 bits (except with a clunky workaround) and that you can't use local tools in 16 bits. On the other hand, nearly all global edits are available in 16 bits, including many filters and plugins. And with ACR, you can open jpegs in 16 bits... For me, even if I know that I can do nearly everything I need in 16 bits in the editor, I must say that first editing in ACR makes that unnecessary most of the time.

I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
Thanks,
Shir

sbmgrams wrote:
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
See here:
Reading PhotoDeluxe PDD Files

UI Element : MessageArea : How to I show a ALV table instead of messages

UI Element : MessageArea : How to I show a ALV table (Message Log) instead of all the messages.

Hi,
Create a View Container UI Element at the bottom of the View and Embed ALV into it. Catch the Errors and populate into ALV instead of report message.
hope this helps u.,
Thanks & Regards,
Kiran

Adobe premiere elements 12 - how to create menu bar action for my inserted image button

adobe premiere elements 12 - how to create menu bar action for my inserted image button without using their movie menu theme

forbemag
I do not think that I am completely focused into this completely, so let us see if the following is going to help.
You are going to need a base for your button. When you mention "image" button, I am assuming that you are using that term to differentiate between a text button and a thumbnail type button.
The menus (main and scene) take their origin in .psd files on the hard drive and strict nomenclature and structure for Layers Palatte. And, the buttons on the menus trace back to the menu markers on the Timeline, main menu marker and order of placement of scene markers. The scene thumbnail will only appear when there is a scene marker on the Timeline to which it.
In view of all that
Where have you already inserted this "image (button)"...into the Layers Palette of a Photoshop document or other? Is this "image (button)" in a structured Layer Group in the Layers Palette with sublayer groups, text layers, graphic/background layer"?
Let me give you an example
If you have a button (with thumbnail) on the main menu and you want that to open to a specific scene in your movie, then you use a main menu marker on the Timeline at the spot that you want that button to target.
If I am getting closer to what you seek, then please further clarify the DVD navigational envisioned scheme.
Thanks.
ATR
Add On...I did not see the exchanges between us and SG until after I had posted mine. I thought that your discussions were concluded. Please excuse the interruption.

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

Unable to install photoshop elements 13 on new computer. Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

In Photoshop Elements 7, how do I free up the ends of a crop box independently?

In Photoshop Elements 7, how do I free up the ends of a crop box independently?
I require the end points to move independently to fit am image crop

Thanks.
You have helped tremendously!

After opening a picture in Photoshop Elements 12 how can I copy the picture to a word processor docu

After opening a picture in Photoshop Elements 12, how can I copy this picture to a word processor document?

Open the photo. Press ctrl+A (command+A on a mac) to select it, then Ctrl+C (command+C) to copy it. Go to your word processing document and press Ctrl+V (command+V) to paste it in. (Note that for the last step the procedure may vary slightly depending on your word processor.)

In Elements 12, how do I get thumbnails to show when opening a file?

In Elements 12, how do I get thumbnails to show when opening a file?

When in iPhoto (photos, library, an album, whatever, etc.) and I try to position the thumbnails at the top of the page I am unable to do so. In the "View" menu of iPhoto, then "Thumbnails" at the bottom, then all the items in the menu are grayed out. I have tried to go to iPhoto prefences and try there, but no luck. I get the beachball turning for a few minutes, then it stops, but still no luck.
I have iPhoto 08, OS 10.5.8, anda PowerBook G4, 17"
Thanks, and sorry for the brief/incomplete question.

In Elements 12 how do I auto fix multiple pictures, then send them back to the organizer?

In Elements 12 how do I auto fix multiple pictures, then send them back to the organizer?

Hi,
You can try the batch processing, refer the below link
http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f89cffc612e28adab65-7 fff.html#WS287f927bd30d4b1f89cffc612e28adab65-7ff6

QUESTION: In Elements 12, how do I join together separate slideshows into a single integrated alideshow?

QUESTION: In Elements 12, how do I join together separate slideshows into a single integrated alideshow?

I hate to say this, but there is no way to put 1280X720 footage on a 1920X1080 sequence and upscale it to match the frame size without losing some quality. Basically, you are asking Premiere Pro to provide new pixels that were not in the original video. That is seldom a really good idea. You might want to try investing in program designed to upscale video. I have never used this, but there is a free trial, so give it a shot: http://www.infognition.com/VideoEnhancer/
Of course, it all depends on the content. Try it with Premiere Pro. Only you can judge. However, you might need to consider putting all of your 1920X1080 on a 1280X720 sequence instead, and just produce your video at that size.
Or, once again, this depends on the content, put some sort of frame around the smaller footage, either a blurred out version of the upscaled footage - lots of TV stations do this with 4:3 footage on a HD program, or purposefully make it even a little smaller, or crop it, and use parts of the same video in Picture-In-Picture. You have seen this before. A person talking on the phone in a larger frame to the left, and on the right a closeup of the mouth, or maybe a clip of the person they are talking to. Or use some B-Roll in the PiP.
Get imaginative, because you already know that you messed up, so perhaps make it look like you did it on purpose.

I've downloaded Photpshop elements 13 : how can I open the application ?

I've downloaded Photpshop elements 13 : how can I open the application ?

Thank you Kglad and John
Your question about 32 bit or 64 bit was good. In fact, before our exchanges, I downloaded Photoshop but I didn't run the application.
After our messages, I tried to click the setup
First,when I clicked "setup" in the directory ""32 bit PhotoshopElem13" I had an error message , then, I clicked the setup in the second directory, it was the good one.... 64 bit !
All is OK
"Merci" from Paris

I want to have a refund as photoshop ellements 13 is the same as photoshop elements 11 how do i get a refund

How do i get a refund as photoshop elements 13 is the same as photoshop elements 11 How do i get a refund@@

To put the album into one group, in the Albums view, select the album and right-click.
and on the pop-up menu, choose Get Info...
..."Yes"
You should also check on the Info tab and make sure that the Album Artist has "Various Artrists" in it.

In Elements 13, how do I turn off default setting that sends my usage info to Adobe?

In Elements 13, how do I turn off default setting that sends my usage info to Adobe?
Vendors of proprietary software want to track everything you do. Adobe says that it is possible to turn off sending info to them, but doesn't include any info on how to do it.

Go to the main page of adobe.com and sign in if you aren't already signed in, then click Manage Account>Sign In again>Security & Privacy>Desktop App Usage Information.

Elements 10 - How to mimic offset/gamma exposure/exposure?

Similar Messages

Maybe you are looking for