Elements 10 possibilities

Does anyone have any info on whether Elements 10 will get rid of gray background (or give options), and make menus etc conform to Windows standards and become readable at high resolutions?
These have been topics of complaint for so long it really is time Adobe addressed them.

It looks like it's under consideration, but you should add a comment
to the post.
http://feedback.photoshop.com/photoshop_family/topics/my_eyes_need_help_with_photoshop
MTSTUNER

Similar Messages

Premier Elements 7 out of memory solution, but....

I finished making my first video in Prem. Elements 7. It's a 4 min long series of about 25 short clips with a few transitions and effects and cuts. I have a Dell Inspiron 1525 w/ 4 gigs of ram with Vista. I did a complete clean out of old programs, defraged hard drive, cleanup using cccleaner, turned off windows defender and all that junk, turned off screen saver, changed settings in control panel to optimum performance with no visual effects, turned off every available extra program through msconfig at startup, and shut down any non critical stuff in task manager. I still get the "running low on memory" message after a few minutes of playback or light editing and then a program shut down.
I requested help from Adobe and to their credit, they did answer promptly with suggestions about several possibilities including finding a bad or oversized clip or photo and eliminate it and many other things that did not work.
So I reverted to the old physical tape and splice magnetic tape days and split the project into 2 files. I exported each half to an avi dv file and it didn't crash in the process. Then I spliced the two mixdowns back together in a new project to make the one complete project.
I say all that to perhaps help someone in the same situation. So I think I've come up with the work around BUT....I've put two avi dv files (compressed I'm guessing) into a new project and when I export again to make a full length file, will the new file be doubly compressed losing quality from going through the process twice?
I'm using a Sanyo Exacti FH1 which has a default resolution of 1920 x 1080 60field/s - which I need to understand better. mpeg 4 files. I'm guessing if I use a lower resolution, Premier should be happier and not have to work so hard?
Thanks for your time,
Thom

Thom,
Going back some years, before FW was as widespread, as it is now, I tried the same thing. I used several brands of USB 2.0 externals, mostly in the 200-250GB range. I had two problems:
1.) Delayed Write Failures were rampant - major problem with file corruption. This was commonly reported by many, who were trying to work to/from USB externals.
2.) Speed - those things were horribly slow and this was too frustrating for me. I gave up and just used the externals for archival storage, as they were originally intended.
I began experimenting with FW-400 externals. I go no Delayed Write Failures, but the speed was still horrible. I gave up on these.
The FW-800 (IEEE-1394b) external drives came out. Most were multi-connections w/ USB, FW-400 and FW-800. With a multi-chip card, first PCMICA and then ExpressCard, I found these to be very stable, fast enough to edit to/from, and I still do this. I use a handful of 1.5-2TB FW-800's to edit to/from and shuttle Projects between computers. Note: I have the drive letter for each of these set in the OS on each computer, so that my NLE does not get confused as to where the Assets are located. If I plug in external Z:\, it comes up as Z:\ on each computer.
Now, eSATA drives and plug-in controller cards (probably only ExpressCard, but maybe some PCMICA's) are common, and eSATA externals are available. These would be even faster than FW-800. If I was not so heavily invested in FW-800 drives, I'd go fully with eSATA. [Also, my workstation is out of PCI/PCIe slots, so I'd have to take something out.]
One caveat, if you go with FW, would be to detach all FW devices BEFORE you use FW to Capture from your camera. I never have anything else attached to that controller chip, when doing Capture. Many cameras will not even be recognized, if some other device is also attached. With some others, the Capture module in the NLE will not see the camera, even if the OS does. With still other, Capture will get halted, or many frames dropped. When doing Capture - make certain that there are NO other FW devices on that chip. Note: with on-board FW connections, one might have several connectors, but are likely to have them all fed into one single controller chip.
Hope that this helps,
Hunt

How to block reusage of archived Project definition and WBS element numbers

Dear All,
We have archived our projects using the TC SARA and the Project definition and WBS elements numbers no more exist in tables PROJ and PRPS etc.. When I now try to create a new project, the system proposes the next open number or allows to enter a number which is the same as one of the archived projects. But in our organization we cannot reuse the Project definition and WBS element numbers (even if it is archived) as a rule.
Can anybody guide me what are the possibilities to block or avoid the reusage of the numbers of archived project definition and WBS elements in a fool-proof way?
Thanks and regards

One Workaround:
Use T code OPSJ and lock the project coding mask. Doing this you can not use this mask any more.
But you want to continue using the mask but with different numbers. Not sure how this can be acheived. lets wait for others view
Regards
Sreenivas

Premiere Elements 9 Tryout Serious Display Problem

I will confine my editorializing to "Deja vu, all over again" and describe the Premiere Elements 9 problem that sounds like I was reliving the release of Premiere Elements 8.
I downloaded and installed Premiere Elements 9 tryout, and it worked great for about 7 days. With no changes in the computer environment, suddenly when Premiere Elements 9 was loading a new project, it would stop at PlayerMediaCore.prm and pop up a message:
"We have detected an incompatible driver. To get a better and faster playback performance, please update your display driver. Display driver details: NVIDIA Corporation GeForce....." and it went on to fully name my video card driver. When I clicked on OK, the program continued to load completely and opened to the workspace where the Edit Mode Monitor performance was, best described as, wacky....Timeline content that would not present in the Edit Mode Monitor, Preview Windows that froze in the Edit Mode Monitor, etc. And, Edit Mode Full Screen Previews did not work at all. The technical irony in all this was that I have Premiere Elements 6, 7, and 8/8.0.1 all installed on the same computer, and all were still performing great when I was using them one at a time as a control.
When I went to Hardware/Device Manager and attempted to "update" my NVIDIA card driver, the "update" that installed automatically was older than what is was replacing. BUT, now Premiere Elements 9 did work as expected. HOWEVER, now my Premiere Elements 6, 7, and 8/8.0.1 were crashing at various times from loading to opening of the workspace. I am still hunting for a replacement NVIDIA driver that will fix the Premiere Elements 9 display issue and not kill my Premiere Elements 6, 7, and 8/8.0.1.
In investigating this matter, I noticed that the Premiere Elements 8/8.0.1 "Enable GPU Playback" is gone in version 9. And, now, if you right click the Premiere Elements 9 Edit Mode Monitor, you have a Playback Quality option of Automatic or Highest. That tells me that Adobe was at work making changes in the name of better. And, I am wondering if what I am encountering is related to Adobe's attempted improvements in display which was one of the issues in Premiere Elements 8.0 when it was released. Or, could this be related to making AVCHD a native format? Lots of possibilities.
The above is my long way of saying "Has anyone run into this type of situation with Premiere Elements 9, any workarounds found (other than buying a new video card just for Premiere Elements 9, ???"
At this point, I know of one other person who got a similar message from Premiere Elements 9 and resolved the problem by updating the NVIDIA card driver. But that still raises the question "Do we need a special video card driver just for Premiere Elements 9?" and "Why?"
ATR

To Vijay and A.T. Romano:
I am happy to help out any way I can. First, I do plan on installing PE9.0 on 2 other computers, both running Windows XP. Currently, both of these computers (Dell desktop and laptop) have PE2.0 running, with no problems. I will try to do these installations later on today.
The 2 new computers have Windows 7 Ultimate 64 bit. While I have installed PE2.0 on these computers, the program runs slowly. I assume PE2.0 and Windows 7 are not compatible. As I mentioned before, PE 9.0 runs fine on the Dell desktop. It does not play videos on the Sony laptop.
The contents of the text file are..
##FALSE#0#0#0
The error message when the program is launched is..
Display driver details :NVIDIA Corporation – GeForce GT 330M/PCI/SSE2 3.0 NVIDIA 188.67
I do hope this help. I can only guess that the problem is wide spread.
Thank you again.
Alan Silberlight

How to bind data from script created variable to embed element of XML schema (xsd) in "Data View"

Hi, i have got another problem with livecycle designer scripting.
I have got script line which is defining of string variable:
var aaa = "this is my string";
and i have got embed XML schema like this (it`s only short part of whole file):
... xs:element name="bbb" type="xs:string"/ ...
After saving data to XML i would like to get "this is my string" as a value of my "bbb" XML element.
To save this data i`m using submit button which is connect with submit.php file on my server.
How to connect script created variable and embed XML schema element which is present on my "Data View" tab.
Please help me a bit becouse i don`t know even where to search answer of it...
Of course i know possibilities to create fake unvisible text field object and bind it with 'bbb' and than put "this.rawValue = aaa" to connect those two variables but i think that is not a good idea to solve it in that way. It`s too primitive

i solve it, i should write this:
xfa.datasets.data.bbb.value = aaa;

WBS element updation through MASS transaction

Hi,
I am trying to update WBS element in Sales order - Item data (Account Assigmanent Tab) using MASS transactiomn, After executing MASS transaction it is updating the same.
Can any one help in this??
Regards,
Srikanth

Hi Mr.Srikky,
I am not sure but try to do the following things
1) Change the WBS manually and save the order, see whether the system allow you to save the order or not.
2) If 1st point is ok then might be you are not executing the MASS correctly, Try MASS for any other feild like payment term.
Please dont mind, I am just looking for possibilities.
Please also cross check the MRP details of your materials.
Regards,
MT

Complete export of SAP XI elements to an external, readable format i.e. XML

Within the scope of a project regarding Dependencies of Applications within the company the data, saved in the Integration Directory as well as in the Integration Repository, have to be exported in an external, readable format which can be processed in another application. My question is concerned with the extraction possibilities I have concerning the different components:
Integration Repository: Here we need the data about Message Interfaces, Message Types as well as Data Types. As this information are formally described using WSDL: Does a possibility exist to export all WSDL Documents automatically?
Integration Directory: Here we are interested in the elements: Receiver Determination, Interface Determination, Sender Agreement etc. Does any possibility exist to export these data to i.e. a XML File? Is ABAP necessary?
Your help will be greatly appreciated.
Kind Regards,
Sebastian Grunow

You can read, alter and load objects with the APIs of the WebServicesNavigator. To browse to there open your browser and go to http://url:Port/index.html
There you can select the Web Services Navigator. Browse through the services for the desired objects. Use the query function to read out all existing objects by key values and as a template to use the read-function of these APIs.
Make sure you have the Java-Roles SAP_XI_API_DEVELOP_J2EE and/or SAP_XI_API_DISPLAY_J2EE

New Element in the Container of PFAC

Hi ,
I have new requirement in my Project. When the User is creatign support message instead of going to the central team it should be routed by Region wise , As my client has the requirement based on the Component with Region Support Team should be determined.
For the same i have check the possibilites in PFAC - Though there is the possibility of creating new Element Like Region and Country . After maintaining Attibute values for it. Still system is not determing right Support Team.
Any body who have an idea on this . Especially on Containers in PFAC.
Please provide your valueable inputs. Thank you.
Regards,
Amrita

hi Amrita,
1. copy the rule
the best is to copy the rule 14000141 with PFAC_RESPO (the container contains the info you need) into a new rule.
you need to assign the new rule to your package (Z_ERP for example)
2. change the rule you created
you go in change mode
in the responsibilities tab of the rule you need to create all the filter that will lead to different teams
you click on the create button to create the filter you want and then you need to assign (right click on the line you have created) the corresponding support team
3. schedule the action with the right parameter
Once this is done you need to schedule the action SLFN0001_JR_FIND_PARTNER with the corresponding condition (you just created ) and the partner_fct SLFN0003
pay attention the user interface is not very obvious and sometimes you are quicked out from PFAC_RESPO
I hope it helps
feel free to ask
br Xavier

How to open jpg, tiff files in camera raw from elements 10 organizer

How to open JPG, TIFF files in camera raw from Elements 10 organizer.

Thanks for that Damead, I agree with you that Organiser is real pain (there is a total lack of intuitiveness if that is the correct word).
For my own work I use 'Lightroom' for around 90% of the time, only going into PSE10 for the 10% difficult bits the Lightroom can't handle.
I only needed to sort out the JPEG file opening method within PSE10 for some freinds in a small Photo Group that I run in Woodhall Spa, UK. 50% of the 12 members are beginners & a number of them do not have Raw capability on their Camera's, but now they can get their JPEG's into Camera Raw within PSE10 they have the same simple tabular form of adjustment sliders (not as many as in Lightroom of cause) but it gets over the labourious problem of going thru the PSE10's individual tool selection process each and every time since we are trying to get everyone in the Group working with individual Tools rather than the 'Auto' functions. We do this so that they learn what they are doing rather than staying 'dumb&happy' within Auto all the time & they also learn how to get more detailed control for each photo.
Ref. your comments on file handling/usage, I agree with your comments. Its far and away much more preferable to set up a file structure in 'Finder" (or in 'Explorer' if still using Windows) that you understand so you always know how to find the files. Also, I also never ever use the Camera Auto Load programme but physically 'drag & drop' photo files direct from the 'card' into the file system so I always know thier place (ie: they go into the location I want, not that which the Auto Loader wants).
As regards your comment about 'Lightroom', I don't have any problems at all since I just imported the whole of my photo file structure into the Lightroom Library Catalouge and then it automatically shows up on the LHS of the screen, still in that format, so you can search it direct within Lightroom and display all of the photo's in variuos arrangements and sizes; everything is as easy to find as it is in 'Finder' plus of cause you have all the 'Tagging' possibilities to use as well. As you add more new files into the 'Finder' structure, all you need to do in Lightroom is reimport, starting 1 level up from the new files and Lightroom will find the new files that need loading (ignoring the older ones already in the Library at that or lower levels) then 1 click and its done.
Your comments about getting others to follow a set file structure is very pertinant and also applies to evrything else that one ever does apart from just photo work; the times I have had to help others find info/files etc on their PC's because they don' know the location of anything is too many to contemplate.
Regards

Adobe Premier Elements DVACORE.DLL Crash

Premier Elements 12 keep crashing on startup or shortly after startup with the same error message. Here's the problem details:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe Premiere Elements.exe
Application Version:    12.0.0.0
Application Timestamp:    523cd4d5
Fault Module Name:    dvacore.dll
Fault Module Version:    11.0.0.0
Fault Module Timestamp:    523cc5bf
Exception Code:    c00000fd
Exception Offset:    00000000000698b6
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
System:
Windows 7 64 bit with 16GB RAM.
Processor is an Intel Core i7-2760QM 2.4GHz
Display is an NVIDIA NVS 315
Here is what I have done so far:
1. Updated the latest graphics card from Nvidia website directly (manufacturer)
2. Tried installing older legacy versions of the driver (11 or 12 previous versions)
3. Uninstalled antivirus (McAfee)
4. Reinstalled antivirus and checked instances for programs
5. Checked Nvidia control panels and changed stereoscopic and 3D settings
6. Running in msconfig (safe boot with minimal resources) I did this to see if a service or process would be causing the crash
After reading this software's forums and a several other suggestions (spend probably over 40 hours on reading and trying fixes) there doesn't seem to be a fix for this. What is the cause of this crash?

Technician907
Thanks for the follow ups. Sorry that the news were not better.
I am not sure how worthwhile it might be, but here are some possibilities
a. create a new User Account with Administrative Privileges and try to install and run Premiere Elements 12 there.
b. Download and install a new set of Premiere Elements 12 installation files...or for 13 for that matter...
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
or
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
When you go this route, you need to read and carry out carefully the web page's "Note: Very Important Instructions"
in order to avoid an Access Denied message.
The history on the dvacore.dll is encouraging. But, please review and consider.
Please update us on your progress when your schedule permits.
Thank you.
ATR

Need help installing premier elements 10

I installed the adobe photoshop elements 10 no problem. But once I tried installing the premier elements 10, I kept getting an error message half way through the installation progress. Here is what it says. Can someone please help. Thanks for your time.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 7 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failed

troythorngolf
Lots of conflicting information, but let us see if any can be sorted out.
1. You have a new Mac Book Pro computer, and you are trying to install Premiere Elements 10 Mac on it.
a. Is the installation disc an Adobe installation disc that specifically says "Adobe Photoshop Elements 10 & Adobe Premiere Elements 10" and is further labelled DISC 3 OF 5? If not, then I am guessing that you have an unauthorized copy. Did the sale to you go through Adobe with regard to transferring the license from the "someone" online seller to you?
b. Adobe allows a purchased serial number for the product to be used on no more than 2 of the users computers. So, a possibility might exist where the seller did not deactivate the product from his/her computer before sending you the product. But, if that were the case, I suspect you would be blocked by a message about too many copies of the serial number on your computers.
c. When you said that the "Photoshop CD installed perfectly", are you referring to Photoshop Elements 10? And, please confirm whether you installed this Photoshop Elements 10 from the same installation disc as the one that you are using for the Premiere Elements Install.
d. In the absence of any of the above possibilities, there are special issues to be addressed with installing Premiere Elements 10 Mac. Those are defined in the link that I have cited already.
e. Besides all the rest, Premiere Elements 10 and QuickTime need to be run under Administrator Privileges. So, you need to set that up. Unless someone steps forward here to detail how to do that with your Mac Computer, please check this out with the Best Buy people. I am strictly an Elements Windows user otherwise I would be giving you a step by step on that aspect of the matter. But, check out the following online link to see if it is helpful with regarding to setting these permissions
http://kb.eset.com/esetkb/index?page=content&id=SOLN2592
f. Do no presume that your video card is up to date. Verify that at the web site of the web site of the manufacturer of the video card, the computer manufacturer, or Best Buy Geek Squad. Since you purchased the computer there, they should be very helpful with these details of Administrator Privileges and video card/graphics card update. Do you know how many video cards/graphics cards your computer has and at least one is NVIDIA?
g. You will need to explain how an "Elements 12" got into the mix. If you want to update Premiere Elements 10, then you need to purchase a serial number for Premiere Elements 12. All the Premiere Elements versions are standalone programs. "Upgrading" related to them refers to a pricing matter rather than updating the existing software.
Please review and then we can decide what next.
Thank you.
ATR

Photoshop Elements 4 won't open, Mac Leopard

Photoshop Elements 4, OS X 10.5.7
Been using Photoshop Elements 3 and 4 with iPhoto 6 for years. Recently, when I tried to open Photoshop from iPhoto, Photoshop crashed.
Since then, I have been unable to open Photoshop from this, my home user account. The load pane opened, Photoshop started loading stuff, got to "loading settings" and crashed. After all preferences and settings have been deleted it gets to "reading workspace modes" and crashes.
Photoshop *does run* from other accounts on this computer. I twice trashed Photoshop Elements 4.0.app and every Adope file I could find and then reinstalled from DVD. That doesn't help.
It appears to me that there must be a pathological item in Photoshop's input queue in this account. If so, I have been unable to find where the input queue is lurking.
The iPhoto entry that caused the problem was not at fault. It gave no trouble when I booted from a SuperDuper clone and used the copy of Photoshop on the clone. I have reported this to Apple as an iPhoto bug.
Can anyone tell me where to find the input queue to Photoshop so that I can purge it?

John Varela:
Your post was emailed to me. I replied by mail, interleaving my comments with yours. Evidently the web site doesn't like that.
A couple of things to beware of when posting to Adobe forums by email:
A line containing 'wrote:' (and perhaps variants of this) will be removed along with anything below it
anything following a string of five underscore characters will be removed
brackets other than curved parentheses (i.e. square, curly or angle) will have unexpected consequences.
Prefixing a paragraph with a 'greater than' symbol and a space will cause it to appear in a 'quote' box. Some other formatting possibilities are given at
http://forums.adobe.com/servlet/JiveServlet/download/2024949-10091/Text%20Markup%20Syntax% 20Help.htm
Did I spot you over in AUE?
Noel

Camera Raw in Photoshop Elements 12

Hello,
I read on chip.de that camera raw is freeware if you use a Adobe product. But the camera raw version in my photoshop elements 12 has only very few possibilities compared to the complete version. And there is also no update higher than 8.5. Is that correct?
So I need to buy Lightroom to have the full function of camera raw? Photoshop is to expensive for me as a hobby photographer.
Greetings, Nina

Those are Lightroom tools for those who don't want to use a regular pixel editor like Photoshop or Elements which have much more powerful tools to do that.
The idea with the reduced set of feature in the ACR version of Elements is that features available in Elements are not necessary in ACR. You need to use the Elements editor more frequently than if you are working with Lightroom.

Premiere Elements 11 Does Not Launch

Hello -
I've recently installed Premier Elements 11 on Windows 7 (64 bit). I'm having a very similar problem to what the user in http://forums.adobe.com/message/5499536 has been going through. When going to Video Editor->New Project the app simply fails to launch. The thread referenced is painful to read with way too many possibilities for errors along the way. Is there a way to start things up in debug mode or in some other way so the program can tell us what's wrong? The guessing game is tough and knowing that things are fragile when there are changes to the system means this is an exercise that many will have to endure.
Steve

Steve
Let us go through this for your specific situation.
Windows 7 64 bit. How much RAM do you have installed and how much free hard drive space? Overall what is the processor description, dual core, ?GHz
Do you have the latest version of QuickTime installed? And, do you check permission, either running program from a User Account labelled for Administrative Priviledges or by right clicking the destop icon and selecting Run As Administrator?
Have you been able to open any Premiere Elements 11 project on that Windows 7 64 bit computer to date?
Rather than have you go through deactivate, uninstall, reinstall at this time, let us see what happens if you delete the Adobe Premiere Elements Prefs file or the whole folder in which it exists.
Make sure that you are working with Folder Options Show Hidden Files, Folders, and Drives selected.
Local Disk C
Users
Owner
AppData
Adobe
Premiere Elements
11.0
and in the 11.0 Folder is the Adobe Premiere Elements Folder that you delete. And, if that does not do it, then delete the 11.0 Folder in which it is included.
Another candidate for creating problems with the program is the antivirus program. See if disabling that in Action Center, has any impact on your Premiere Elements 11 performance on Windows 7 64 bit. Temporarily remove the check mark next to virus protection.
It might be easier to go through the thread that you mentioned and work through the possibilities than it would be to do otherwise.
Another prime candidate is the video card driver and whether or not it is update to date according to the information at the web site of the video card manufacturer.
All quick enough to do in a systematic troubleshooting plan.
Under Window Menu in the project, there is an Event category.
And, there is an Adobe troubleshooting scheme using Logs to troubleshoot installation issues.
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html
See how you do on the above. Then, if you have not done it already, I would suggest that deactivate the program (in the project Help Menu/Deactivate), close the program, and then go the Control Panel route to uninstall the program. Then reinstall the program. All this with the antivirus and firewalls disabled for this time period.
How did you do resizing that photos? Did your friend help you with that or is the meeting with the friend still to come. I ask since perhaps the friend could get a first hand look of the situation and perhaps from that perspective target the issue. If not, it is a process of going through the typical troubleshooting schemes systematically to rule out or in what we can.
Please take it one step at a time and let us see if we can work through this.
Thanks.
ATR

Trial version of elements have question

Hello. After trying to load premiere elements 8 on my old pentium 4 machine and not working, I tried loading Premeier elements 7 trial version and it works fine. I have one question. The trial version banner is covering my screen when I'm watching videos. Can I take it off?
Thanks Gib

You're most welcome. We'll be interested in seeing the details on your laptop, and also what you find with Event Viewer. It is most likely that you will have a bunch of error and warning messages, just before the BSOD. Some will just have useless code, but some should have links. Hopefully, a few of those links will unlock the mystery of exactly what is happening to cause your BSOD. Do follow all links, but know that some might also be useless code. Do not ignore any of the error, or warning messages and patiently read all info contained within.
One likely culprit for the BSOD is a major driver conflict, though that is just one of possible causes. There are many, many more possibilities.
Hunt

Elements 10 possibilities

Similar Messages

Maybe you are looking for