Elements 10 will not recognize RAW files from new Canon 70D

Do i need to spend more money at upgrade to Elements 11 or 12(once released?

fotoman1951 wrote:
Do i need to spend more money at upgrade to Elements 11 or 12(once released?
Only if you want to get the new version but there is a solution to your problem. The solution is to use DNG converter and to use this video as a learning tool:
<http://www.youtube.com/watch?v=0bqGovpuihw>
Hope this helps.

Similar Messages

Elements 11 will not recognize raw files from Nikon D610

Elements 11 will not recognize raw files from Nikon D610. I have downloaded ACR 8.2 and DNG converter to no avail! Any suggestions? It does recognize files from my D600.

Support for the D610 was added in the latest release candidate version of Camera Raw, 8.3 RC. You will need to install that version or wait until it is officially released. Your choice.

My photoshop cs5 will not recognize raw photos from my canon eos 70d

my photoshop cs5 will not recognize raw photos from my canon eos 70d

No. DNG is a RAW format. There are a few small manufacturer specific items that are left out when converted to RAW (for example, Nikon's Active D lighting) that aren't maintained, as well as some Meta data and focus points, etc. Personally I never noticed the difference, but perhaps some do. There is no impact to the image quality, you have just as much post production freedom with DNG.
I did it for a couple years before upgrading to CS6. It's an extra step, but you get used to it and it's not a huge deal. I would put my card in my reader, and download to a temp file. While that downloaded I would go to the fridge and grab a beer [Edit - you can substitute the beverage of your choice ]. Then I would run the RAW to DNG converter, and drink my beer. It was usually done before my beer (if not I got another). I saved the CR2 files as a backup at first, but once I got comfortable trusting DNG I stopped doing that.
Another option is to get Lightroom and use that for your developing. You can then send over a TIFF file with the edits. But in this situation you couldn't send the image over as a smart object (I think, I assume this would use ACR?).

How do I upgrade elements 10 to open raw files from my Canon 70d?

How do I upgrade elements 10 to open raw files from my canon 70d?

Normally, if there are any updates for your version of PSE then they should be offered to you automatically. However, you can also check if there are any new updates by going to:
Help >> Updates
If your camera is relatively new then even by getting the updates you may not be able to edit raw files from the new camera because old versions of PSE are normally not updated as soon as the new version hits the market. We are currently at version 13 so version 10 was stopped long time ago. However, you can see a workaround at this link where I posted a video to get things moving:
<Why can't I open my RAW files from my Nikon D7000 ?? I can open RAW files from my old Nikon D70's but not my D7000...>
Hope this helps.

Elements 7 will not download RAW files from new 5dmarkII, ??

Got new camera for christmas 5dmark II, elements 7 will download jpegs just fine , but will not import raw files. my 40d will download both jpegs and raw with no problem ( has done so for years ). need any help I can get. thanks

John,
When I click on the link, the page appears, but my mouse is dead. Clicking on Download and other apparent links has no effect. I'm using IE 8. Other pages/links work fine. Have you actually downloaded the ACR from the link? There is something going on with that page.
I would be interested in hearing if anyone has successfully downloaded ACR 5.6 from that page.
Don S.

Camera raw does not recognize raw files from new camera

Tried downloading and installing Bridge update, to no effect. Working with Macbook Pro, OS X 10.9.4. Adobe Bridge version 4.0.5.11. Camera is Fujifilm X-E2, and is mentioned in the Camera Raw list as a file type Camera Raw should recognize.

You're wrong, reno1950.
That camera was first supported by ACR 8.3, which needs at least Photoshop CS6 to run.
Since you say you're on Bridge 4.0.5.11, you must be on Photoshop CS5.
You have two choices: either upgrade to CS6 for $200, or look for, download, install and run the Adobe DNG Converter version 8.6 on the folder(s) containing the raw files from your Fuji camera to raw DNGs that you can then open in your version of Adobe Camera Raw.
Note that neither Bridge nor Photoshop can open raw files nor raw DNGs, only Adobe Camera Raw can.

Lightroom 3 will not recognize raw files on my canon 6d-.

My question is… Do I need to upgrade to LR4 or newer? I currently use LR3. I just upgraded my camera to Canon 6d from 60d and really don't want to have to pay to upgrade. I downloaded the Adobe DNG Converter but even that won't let me convert the 6d raw files.

Camera Raw plug-in | Supported cameras
The link above will show when support was introduced. 6d support LR 4.3
The latest DNG converter is version 8.5 which is equivalent to LR 5.5. The converter is a stand alone product. After installing the program open it, then select a folder that contains the raw files you wish to convert and proceed from there.

Elements 11 will not process RAW files from my Nikon D7100

Elements 11 will not process RAW files from my Nikon D7100. Ca anyone help?

My version of ELEMENTS 11 contained an out of date Applications Manager and would not look for updates. After I discovered this (involving much trawling on different websites) I downloaded an up to date version which found Camera Raw v7.4. Happily, this works. Version 8 is not yet available.
Anyway, thanks for your help.

My Photoshop Elements 9 will not download a file from new Apple photo application on iMac (installed 4-9-15) What to do?

What to do to correct problem?

Duplicate, see:
My Photoshop Elements 9 will not download a file from new Apple photo application on iMac (installed 4-9-15) What to do?

Photoshop CS5 will not open raw files from Nikon D810. What do I need?

Photoshop CS5 (bought in 2011) will not open raw files from Nikon D810 (bought in 2014). Is there a patch? Is there something I can do?

YAY!!! Success. Thanks Jim. I have the raw file for this image. ABC OPEN: Dancing water spouts in severe weather I'm such a noob, I hadn't even set up the correct date on the camera.
ABC OPEN: Dancing water spouts in severe weatherFran McFadzen captures a once in a lifetime photo of two dancing water spouts near Rockhampton.
View on open.abc.net.au
Preview by Yahoo
From: JimHess <[email protected]>
To: Fran McFadzen <[email protected]>
Sent: Monday, 26 January 2015, 10:20
Subject: Photoshop CS5 will not open raw files from Nikon D810. What do I need?
Photoshop CS5 will not open raw files from Nikon D810. What do I need?
created by JimHess in Adobe Camera Raw - View the full discussionThank camera requires Camera Raw 8.6 which isn't compatible with Photoshop CS5. But you can download DNG converter 8.6 or newer and create digital negative (DNG) copies that will be compatible with Photoshop CS5. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7130665#7130665 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7130665#7130665 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Camera Raw by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Iv just installed cs6 and it will not open raw files from canon 5d111?

iv just installed cs6 it will not open cr2 files from my canon 5d111 ?

update your adobe camera raw files.
windows: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
mac: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

Latest version of Lightroom will not download RAW files from my D750. How does one get around this? Bought Lightroom for it's ability to manage RAW files and now very disappointed.

Latest version of Lightroom will not download RAW files from my D750. How does one get around this? Bought Lightroom for it's ability to manage RAW files and now very disappointed.

Here is the contents of a batch file which will convert whatever raws you drop on it:
"C:\Program Files (x86)\Adobe\Adobe DNG Converter" -cr7.1 -dng1.4 -p0 %*
Once you download the latest converter (release candidate from adobe labs, if necessary), and save the appropriate contents of the batch file (change path to match your system, and parameters to match your druthers, if applicable), the procedure is:
1. Drop raw files on bat file.
2. Import as usual (the DNGs).
Not too bad once you're set up (if DNG converter supports your raws).
Documentation:
http://wwwimages.adobe.com/content/dam/Adobe/en/products/photoshop/pdfs/dng_commandline.pd f
Note: on Mac, you may need to use "$@" (with the double-quotes) instead of %* (which is dos batch syntax), and you will need to use the full path to the converter executable file, e.g.
“/Applications/Adobe DNG Converter.app/Contents/MacOS/Adobe DNG Converter”
If too much, just use the GUI instead of the bat file.
Rob

Can't open RAW files from a Canon 70D

Can't open RAW files from a Canon 70D with Photoshop Elements 12. Is there an upgrade / download available. Current RAW plug in is version 8.0.0.137

What operating system are you using?
The newest version of camera raw for pse 12 is version 8.4, which should open the canon 70D files.
Have you tried Help>Updates from within the pse 12 editor?

Lr4 version 4.4.1 will not recognize nef files from my nikon d610? why?

I downloaded the latest version of LR4 (4.4.1) and downloaded the latest raw converter as well and it still will not recognize the files. I updated PSE12 with the latest raw converter and that opens fine.

Because your old version of Lightroom has no idea what a D610, or what to do with its files - the latest version of Lightroom is version 5.4, and D610 support came with Lr 5.3.
So you can either upgrade to 5.4, or convert your D610 files to DNG (which Lr 4 can read) using the Adobe DNG Converter: but Lr 4 will never, ever, natively support the D610.

Will Lightroom 5.0 or 5.3 open raw files from my Canon 70d and will I subsequently be able to work on them in Photoshop CS 5?

I don't want to convert to DNG files. I have have Lightroom 4 and Photoshop CS 5, neither of which will open my raw files from my new Canon 70d. Trying to decide between buying the education version of Lightroom 5 with update to 5.3 if that will do the trick or joining the creative cloud for $9.99/month. Would appreciate accurate advice. Thanks.

You need Lightroom 5.2 or later. The educational version should work fine.

Elements 10 will not recognize RAW files from new Canon 70D

Similar Messages

Maybe you are looking for