Elements 10  won't recognize O/S system

Shows up as  XP and not windows 7 which is the correct system ??

Katleen2 wrote:
Shows up as  XP and not windows 7 which is the correct system ??
Where exactly is this showing?  All I am seeing in my PSE10 is this (click on this image to get a bigger one):
Good luck.

Similar Messages

  • Erased mac book pro (2009), how can i reinstall osx?  it won't recognize any old system disc

    erased mac book pro (2009), how can i reinstall osx?  it won't recognize old system discs

    Did you try:
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    If you don't have the original discs that came with the computer, then you can install the retail version of Snow Leopard:
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.

  • Elements 3 won't recognize a camcorder

    Have version 3 installed. It won't recognize a Sony digital camcorder which it has in the past. Used both USB and firewire. Firewire works with Microsoft Movie Maker Using Windows XP.
    Also have version 4.0 but didn't install it because of the negative comments I read on forums such as this one.
    May have to reinstall version 3 to solve problem. Other question is, should I reinstall 3 or install 4? Or should I just buy the new version 7 bundle?
    Any suggestions on how to get version 3 to recognize the camcorder? Or, if not, which version is the most stable, etc. I have not progressed to HDV or Blue Ray yet and have no need for this capability. At least, I don't think I do.
    Thanks for your input.

    Using only the FW connection, as PE cannot work with the USB connection, if WMM can see your camera (is that what comes up, when you plug it in, and turn it on?), it does sound as though something is getting in the way with PE.
    I've seen instances, where the exact order of things seem to affect the operation of a Capture operation. These seem to be camera and system specific.
    Try plugging in (FW only) the camera, turning it on, letting the Windows pop-up come up and exit out of that. THEN, start PE. Does this help? If not, power-off the camera and unplug it. Cancel any pop-ups about hardware unplugged, should you get any. Start PE. Plug in the camera, and then power it up. Exit any pop-ups, and put PE into Capture Mode. Does this work?
    If still no go, then try plugging in the camera, but NOT turning it on yet. Start PE, go into Capture Mode, and THEN turn on the camera. Exit out of any pop-ups. Does this work?
    Note: always plug/unplug the camera with the power OFF. Though there has been discussion on this (as most camera FW ports are 4-pin and unpowered), but be safe. No power on, when you plug/unplug. I even turn off power to the computer, when doing the plug/unplug operation, but then one could not have PE going, without always having the camera plugged in, but powered off. Just be careful with the plugging of the FW into the computer. We do not want a fried FW port on either your camera, or your computer. Yes, there is a little "catch-22" involved with my above suggestions.
    Steve's suggestion to use WinDV is a good one, and might save you bothering with the test. Most folk do not have a problem with a FW-attached mini DV tape camera and Capturing via PE.
    Good luck,
    Hunt

  • ITunes won't recognize High Def system.

    I have a PC running Windows 7 and the computer says it is HDCP compliant.  I have 25 inch high def monitor.  My cable company sends everything in high def but ITunes refuses to recognize it and won't let me download anything in high def or play anything in high def.  Is there a setting I need to put on ITunes to get past this or what can I do?
    Thank you.

    Type "iphone not recognized in itunes" into the search bar at the top of this page by "Support" and read the resulting help articles.

  • Elements 10 won't recognize my RAW files from my new Canon T5i.  What can I do?

    need help with RAW and Canon T5i in elements 10

    Which operating system are you using?
    Other than upgrading to photoshop elements 12, you could use the adobe dng converter 8.6 to convert the files to dng copies, which pse 10 should then open.
    windows
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
    mac
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
    how to use the dng converter
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Elements 2 won't recognize IE version

    My Win XP computer that was running Photoshop Elements 2 crashed and I'm trying to move the program to another XP computer. When I try to install, I get a message that I must have Internet Explorer 4 or higher and the installation quits. It fails to recognize IE7 on the pc. Any workaround? I would upgrade Elements, but my wife is comfortable with using 2 and doesn't want to change.

    You could try re-setting preferences -- as you start Elements press and hold Alt+Control+Shift (hope I'm remembering that right) and follow through the dialog box.
    Bob Warren

  • Elements 10 won't recognize my printer

    I have printed many times with the current printer, Epson XP 810, and recently paused it in the middle of a job.  Now I get the error message that I have to install a printer. I changed the printer name to a shorter one and I still get the message.
    Thanks.

    Which operating system are you using?
    Other than upgrading to photoshop elements 12, you could use the adobe dng converter 8.6 to convert the files to dng copies, which pse 10 should then open.
    windows
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
    mac
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
    how to use the dng converter
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Adobe Photoshop Elements 9 won't recognize HP Photosmart Premium C410

    My HP Photosmart Premium C410 works with all my applications except Adobe Photoshop Elements 9 - which is great for an imaging program!!  The printer is defintely selected as default.  However, there are two options avilable on the "print" page of PSE and they are very similar - perhaps indicating an issue.  The first on the drop-down is "HP Photosmart Prem C410 series fax", while the second (which I have selected) is "HP Photosmart prem C410 series".  Every time I try to print from PSE, it starts up the fax process.....!!  Anyone any ideas - all advice gratefully received.  
    This question was solved.
    View Solution.

    Kellerrolf,
    Please try to rename the "HP Photosmart Premium C410 series Fax"  to "PS C410 Fax". You can change it by:
    Open "Printers"
    Right click the HP Photosmart Premium C410 series Fax and selecting rename
    If it still is loading the fax when you printer there are few more steps that we can try.
    Andrew
    Please know that I work for HP but my posts and replies are my own.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Elements 8 for Mac.  Won't recognize RAW

    Hi.  I installed Elements 8 on my Mac last night.  All of my RAW images in Bridges were just a blank page with a folded corner.  When I tried to open my cr2 images it told me Photoshops cannot recognize that file format.  I went to the online support and found the Camera Raw version 5.6 download and followed the instructions to load it.  As far as I can tell it is where I was told to put it.  I now have images in Bridge but Elements still won't recognize that type of file.  Raw is also NOT listed as a plugin in the Camera Raw preferences  list, although when I look in Finder it is listed there under file formats for CS4...  I don't know where to go from here.  Any help with be greatly appreciated!

    I shut everything down and when I tried again it worked!!  Thanks!

  • Premiere 12 won't recognize Cannon ZR960 and allow capture

    Premiere Elements 12 won't recognize my Cannon ZR 960 video camera so I can capture video from mini cassette to my Mac computer

    RGI
    Thanks for the reply.
    Premiere Elements (any version) classically works only with a firewire connection between the camera and the computer to the Premiere Elements Capture Windows for DV and HDV data capture firewire.
    I am unfamiliar with this "lightning outlet". I see some say Thunderbolt = Lightning and other say Thunderbolt is not the same as Lightning. Whatever the case, I suspect that computer port is at the core of your issue with Premiere Elements which has been firewire requiring. Have not tried it, but I do not think that a firewire adapter for the lightning port would work. Have you tried that?
    But, good news that iMovie recognized the Canon ZR 960. Can you import the DV.mov and MPEG2.mpg (assumed iMovie capture formats) from save location  into Premiere Elements 12 Mac?
    ATR

  • After OS Upgrade, System Preferences won't recognize audio input/output.

    When I got an iPhone, I had to upgrade to OS 10.5.8, as well as upgrade Safari (to 4.0.3) and iTunes (to 9.0.1) for everything to run smoothly, and it does.
    However, since I went though the motions last week with these upgrades, System Preferences or Utilities doesn't want to recognize my audio input/output jacks. It won't recognize when I plug in my stereo or my headphones. I hook up my computer to my stereo all the time to listen to music in the living areas of my apartment, and now I can't because it isn't reading the jack.
    Any suggestions? How can I get the system to fix this problem?

    Check your Audio MIDI Setup settings.
    These are user-to-user forums where everyday folk post questions and offer answers to each other. Apple does not contribute to this message board. None of us has any idea what Apple is going to do until they do it.
    If you feel it's a "problem" did you post in the Product Feedback area?

  • New ipod, system won't recognize ipod

    My sister already had an ipod on this computer. I got one over the weekend and put some music on it using another computer than my home computer. I came home and plugged my ipod in but the system won't recognize it. Every few tries it recognizes it and says its corrupt. Any info is appreciated. Thanks and happy holidays.

    HI.... I just gt a new video iPod.... I already had
    iTunes and music from the music store from a previous
    iPod, so I just downloaded the latest iTunes
    software... I downloaded the atest iPod updater
    software too... So, I plug in my iPod, and the "DO
    NOT DISCONNECT" screen comes up, and my iPod is
    recognized in My Computer, but is not recognized in
    iPod Updater OR in iTunes... has anyone else had this
    problem??? if so, have you fixed it. if you did...
    HOW?!?!?!?!
    SOMEONE PLEASE HELP ME!!! IM UPSEETTTT AHHHHHH
    Hi there
    I have a possible solution.
    Justre-install your iPod updater
    This worked for me, and I hope it works for you too!
    Sincerely
    Matthijs

  • OS X 10.6.8 was playing DVD now won't recognize store bought discs.  Normal Discs no HD and the same discs work on imac.  Any thoughts?  Is there a patch or a way to reload possibly or a system utility that I can run?  Thanks anyone

    I don't know what changed but it just won't recognize a disc any more.  The DVD player itself seems to open up, but the disc just spins in the case and after 20 seconds it spit it back out like nothing ever happened.  The same disc plays fine on the imac.

    In this thread, the link is in CMCSK Dec 31, 2011 6:04 PM post.

  • TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

    I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

    Same question Wish someone had replied!
    I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

  • Deskjet 3050 won't recognize wireless network anymore.

    Product:  HP Deskjet 3050
    Operating system:  Windows 7-64 bit
    Printer quit printing wirelessly.  Using the control panel on the printer, I restored defaults.  Now it won't recognize any wireless networks.  I have unplugged computer, but that didn't help.  I don't want to unplug my router, because I will lost all my DVR items (we are on AT&T uverse).  Any tips?

    Run a Wireless Network Test from the Network menu of the front panel.  What does it say?
    If everything is OK (which I suspect), re-install the printer with the temporary use of a USB cable just as you did originally when you installed it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for