Elements 11 change position & scale at the same time

I have Premiere Elements 11. Can I change position and scale of the same clip over time using keyframes? I have figured out how to zoom in and out and how to pan using keyframes, but when I try to do both, the the first effect applied gets reset.

ShaneRoney
Are you in Applied Effects Tab/Applied Effects Palette/Motion Panel expanded and the Position and Scale properties there? Or are you trying to do keyframing at the Timeline clip's rubberband level?
Assuming the Motion Panel expanded route....
After you hit Toggle Animation with your Timeline Indicator at the start of your segment with Position and Scale at the start values, move the Timeline Indicator right to the next spot, set the Position fields to where you want them, move the Scale to where you want it, and then move the Timeline Indicator right to the next spot as you move across the clip in this routine.
At a fixed Timeline Indicator position do both sets before moving the Timeline Indicator to the next spot.
Assure yourself that you can keyframe Position property by itself and Scale property by itself. Then start again and do both at the same time as suggested above.
If there are still glitches in the process, please describe further, and we will work out the details where we are differing.
Thanks.
ATR

Similar Messages

  • My Apple ID and rescue email are reversed. How can I change them both at the same time

    My Apple ID and rescue email are reversed. How can I change them both at the same time?

    I'd already used this standard tool (exhaustively!), but for the problem encountered it operated in Catch 22 mode - you had to do two things but neither order was permitted. I did find an answer eventually, but am not sure what it was I did that solved it! Thanks, anyway.

  • Is it possible to enqueue multiple elements in a queue at the same time

    I want to know that is it possible to add mutiple elements in a queue at the same time, i am able to do one element at a time if i want iw ill be using for loop, but is it possible without for loop????
    nilesh

    You can't, but if you may redefine the  queue datatype as an array.
    Paolo
    LV 7.0, 7.1, 8.0.1, 2011

  • AddressBook - Is there a way to change multiple addresses at the same time?

    To be clear....I have 25 contacts at 1 company and that company moved.
    Is there a way to link the cards together so that when I change the address on one card it automatically updates the other 24 cards?? Rather than having to change each contact individually, which is time consuming and annoying.
    I have created a "Smart Group" for the company and all of the contacts place themselves in the group but it still won't sync the addresses.
    Can someone tell me how to do this, if it's even possible? And if it's not, I really wish it was!!
    Thanks!

    Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

  • Coupled contacts - change both at the same time.

    I have contacts on my iPhone that are related to my Exchange e-mail accounts. They synchronize just fine.
    I also have, mostly the same, contacts on my iPhone, imported from Outlook. They just synchronize one way (FROM outlook TO iphone, not the other way around). By the way, if anybody knows how to sync both ways, I'd be very happy to hear that.
    Similar contacts are coupled (I don't know the exact English phrase, in Dutch it's "gebundeld"), so you don't see any duplicates in the Contacts list.
    Unfortunately, when I change a "coupled contact", it just changes one of the two contacts that are coupled.
    I would love to be able to change both contacts at the same time.
    Can this be done? If not, could this be made possible? Please?
    With kind regards
    Repelstale

    Hi and  welcome to the forums!
    How about a move! :
    http://crackberry.com/blackberry-101-lecture-6-how-install-microsdhc-card-your-blackberry
    If this anwers your question please resolve the post, if not please ask more!
    Thanks!
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Two different Resultsets for the same query (running at the same time)

    I am using the Thin Driver for Oracle 8.1.6. I am invoking queries in multithreading mode (each thread has his own connection to the oracle DB). If i am invoking the same SQL-Statement in two different threads nearly at the same time, only the ResultSet of the first query is complete. The ResultSet of the second query is not complete (the number of tuples differs each time I run the program). Principally the two ResultSets should be the same (no changes are done at the same time in the DB), but they are not.
    Anybody knows this problem and knows how to solve it? Principally read accesses on DBs should not make such trouble ...
    I hope anybody can help me.

    Pranav,
    As this BADI is having option checked 'Multiple use'. You can implement multiple implementations.
    You need not to deactivate the existing implementation.
    Reddy

  • How can I change the length of multiple lines at the same time?

    This just seems like it should be a no-brainer, but obviously for me it isn't.  I'm trying to change the length of multiple lines, that are at different angles, at the same time, in CS4.  Basically, I design the face of dials used for airplane instrument gauges (like RPM, Torque, etc), and they have gradiation marks (lines) located all around, similar what a clock looks like with the hour and minute gradiation marks (lines).  Is there a way to select all the lines, that I know are the same length, and change it to a different length, that's accurate to the 1/100th of an inch?  It would just be like selecting multiple lines that have all the same stroke, then using the stroke box to change the stroke weight from .025in to .030in.
    I've used the transform box to change the 'height' of a line before, but the line has to be at 90 degrees (straight up and down), and that won't work for the lines that are at, say, a 45 degree angle.
    I hope i'm explaining this in a way that someone will understand. If not, I can sure try to clarify more, or insert the picture so you could see what i'm talking about.
    Thanks for any help you can give!

    OK, after fiddling around with everyone's ideas, I think I finally got it. I knew there had to be something with proportions between W and H, but couldn't figure out the math, until Jacob answered with:
    "If each line must be strecthed from the inner/outer end, you may select each and use the Transform palette, choosing the right Reference Point, multiplying by the proportion in W or H (1.75/1.5), and Ctrl/Cmd clicking."
    Now, I basically did everything above, (but I couldn't figure out what you were talking about with the Ctrl Clicking thing), except after figuring out the right proportion (which ends up being so small you guys would die if I told you the number; the numbers I gave earlier were just an example and much larger than what i'm really working with) I just clicked the little chain next to the W and H boxes to constrain the proportions. I then put the new number (multiplied proportion by whatever was in W) in the W box. The line lengthened perfectly toward the center of the dial, keeping the correct angle!
    And Harron-Thanks for the link to Teri's, It is going to help with some things I do, but most of the dials I design don't have equal distances between each gradiation mark, and the blueprints I work off of usually have exactly what distances that the grad. marks are supposed to be. So, after selecting one of my grad marks that is already at it's correct place, I then use the rotate tool and Alt-Clicking the very center of the dial, I can then put in exactly what distance I want the next grad. mark to be at, I hit copy (instead of OK) and there will be a new grad. mark exactly the correct distance from my original. Then if I want to have the 3rd grad. mark I just hit Ctrl-D and it will copy another mark to the next position. I don't know if you necessarily wanted to know all that, but i thought i'd explain why I like doing it that way.
    A BIG thanks to everyone! I'm really a AI newbie and am the only one at my company that knows how to use it, so I don't have anyone close to ask stupid questions to. So I appreciate all your help!

  • How can I change the font to multiple titles at the same time?

    Hey guys, quick question. I have a bunch of titles and lower thirds in my project and my producer decided that he didn't like the font we were previously using and wants to change it to a new one. He seems to do that pretty often. Is there a way to "globally" change the font to multiple title cards at the same time instead of clicking on each one separately and doing it manually for each one? And if there is no way to do that does anyone have any ideas on how to make it easier?

    If you have any idea of design and fonts you would understand that "Title Cards" are not "exactly the same" if you change the font... because all fonts are not equal! Lower thirds are probably even more restrictive because they have design elements in them.
    If you work with "change their mind producers"...the deal that goes with that is suck up their changes. (on a salary or otherwise)
    I was just saying there is no way without scripting ..to change a title ( graphic) en masse ( in Premiere) and get it working because of font differences.

  • Work on more clips at the same time (premiere elements 11)

    Question: is het possible to change the colour / ad the tool videostabilisation on 2 or more clips at the same time?

    Gentlemen,
    I will try to explain what happened to me when I tried to paste effects.
    I copied the keyframe effects from the first clip, (selected the clip, right click, copy)  Then selected the target clip and didn't pay attention to the postion of the timeline indicator which was about 1/3 of the way into it.
    Subsequently, when I then selected "paste effects and adjustments" to this target clip, it did so, but the effects then began at that point where the timeline indicator was at.
    So for a timing eg:  Say the both clips are 10 seconds long with all the effects at the beginning within the first 5 seconds.
    The indicatior was at about the 4 second mark in the target clip when pasting and that's where the 5 seconds of effects from the first clip started.  (about 4 seconds in)
    Since I didn't know about the shift key technique, I just discovered that moving the timeline indicator to the beginning of the target clip (first frame) and re-do the procedure, it resulted in the correct position and timing etc.

  • File changes from more than one user at the same time

    Hi,
    two of  my colleauges opened a photoshop file at the same time and both could make changes. Saving the file kills one person's changes, which actually shouldn't be possible. How can this be avoided?
    Thank you
    FriedaLee

    This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
    See: 
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
         Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.   It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • Moving apps, their data from one ipad to another AND changing/deleting at the same time!

    Hi,
    I would like to get ready for my new iPad. Over time I have accumalated a LOT of Apps which I don't use or  would like to organize differently.
    Others (games or internal documents/settings) I would like to leave intact. Is there a way to choose what to import and maybe already pre-sort?
    I know of the restore feature from a specific backup (used that in the past) that DOES keep the data intact but does not allow for my organizing/spring cleaning scenario...
    I was thinking directly of the new Apple configurator tool. I could import my iPad profile, and based on that choose apps to keep (and their data) or delete in a first step. Even better would be if I could then group them in folders or screens BEFORE I sync this new profile to my new iPad.
    This would also be ideal to manage backups and different setups for family members when we do the family shuffle.. I upgrade, hand my old device to my better half, she hands her to X family member etc., etc.
    My issue is that the help menu of the configurator toll indicates it works only for volume bought applications. Is this right? Why the restriction?
    Main concern of course is not installing the application on a specific device BUT to copy the app (AND internal data) exactly to another one!
    I'm surprised that Apple hasn't adressed these issues better but maybe they did with this new tool (or another way) and I just don't see/understand it.
    Thanks for any and all input,
    Philly

    Thanks Rudegar
    My problem is a little different. I would like to selectively sync apps and maybe change/add/delete folders and app screens.
    I know how to "clone/restore" the iPad. I was hoping that I could maybe use the Apple confugurator for this purpose and customize my apps based on an import from the old iPad. As such weeding out old apps and not having to use the cumbersome iTunes method but at the same time protecting my backed up data.
    It could also simplify data transfer if I could create multiple profiles/people from which I can choose who to sync/transfer to a specific iDevice.
    But thanks for taking your time and providing a solution to transfer all files from one device to another.
    Philly

  • In Elements 7.0, how can I delete multiple photos at the same time?

    In Adobe Photoshop Elements 7.0, how can I delete multiple photos at the same time?   Please be a little specific so I can follow your instructions as I'm not real smart at computers; I'm an intermediate user.  Thank you.

    Shift-click the photos or Ctrl-click them to select them, then right-click one of them and choose Delete from Catalog. They will all go together.

  • How do you change multiple songs genre at the same time

    How do you change multiple song's genre at the same time with out during them one a time in ITunes  on Windows 8?

    You can select a range of songs by selecting the first, then holding shift when clicking on the last. You can ctrl+click to add or remove from the selection. Once you have a selection press Ctrl+I to Get Info. Type in the new Genre and press OK.
    tt2

  • How to change keyword in many pictures at the same time?

    I gave a big series of pictures the wrong keywords. Now, I can't figure out how to change them (besides one by one...).
    If I select e.g. 10 pictures in Library-mode, how to change keywords on them all at the same time?

    Make sure you are in Grid View, primary monitor (if you have two), select 10 pictures and type (or delete) the keywords in the Keywording panel in the left upper corner.
    Make sure the Metadata->Show Metadata for Target Photo Only is unchecked in the menus. Otherwise your edits will only apply to the primary selected (most selected) image.

  • Can I have two projects open on Premiere Elements at the same time? (Elements 13 for Windows)

    Hi there.
    Can I have two projects open on Premiere Elements at the same time?
    The reason I wanna do this is because I've trimmed many hours of clips in one project (One timeline) and I want to start a new project where I have a "clean" timeline and can add clips from the
    first project (Cut and paste). Or how do I bring a trimmed clip from one project into another in a easy way?
    Thanks
    -Dan-

    Your question is in the Photoshop Elements forum.  There is another forum for Premier Elements and this will probably be moved.
    That said, the answer is that Premier Elements has not be designed with the ability to cut and paste from one project to another.  The only "work around" is to "Publish&Share" to a best quality format that matches your project settings.  You can control the output clips with the "work area bars".  You can then add the new clip to the second project.   The output rendering process can, at least in theory, reduce the picture quality.  Depending on formats, settings and footage, it may not be noticeable.
    There is a third party product called Clipmate that some say works, but not always with good results. 

Maybe you are looking for