Elements 11 fails to detect my DVD burner...

This has never been an issue before, any ideas as to what is wrong?

What did you change from when it did work to now when it does not work?
Did you install something new, as discussed below?
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941

Similar Messages

ITunes 7.3 failed back up data DVD burn had error code 261(0x00000105).

Just bought a bunch of new songs and went to back them up in iTunes 7.3 and I keep getting error code 261(0x00000105).
Any ideas? Did not have this problem in prior versions. Brner works fine with other programs.
Thanks!
Home Brew Windows XP Pro

Keep getting the same error as well. Run cd/dvd diagnostics and it should tell you... "The last failed data CD or DVD burn had error code 261(0x00000105)".

DVD-Audio player does not detect any DVD-Audio sour

Hi,
I am trying to play a DVD-Audio disc on my computer using the DVD-Audio player software that came with my Audigy 2 card, but the software fails to detect my DVD-ROM dri've as a DVD-Audio source.
I can play audio CDs and DVDs with no problems using the DVD-ROM dri've.
The OS is WindowsXP Pro with SP and I have the latest patches applied to both driver and DVD-Audio player software.
I would appreciate any suggestions if someone experienced this anoying problem and solved it.
Thank a lot!

DVD Audio encryption security has unfortunately been hacked using the decoders within WinDVD from Intervideo.
As a result, DVD Audio playback using the WinDVD/Audigy combination has been suspended on "new" versions of the software.
I am a registered user of WinDVD and upgraded to WinDVD 7 Platinum in June and DVD Audio was working fine.
I mistakenly downloaded an "upgrade" to WinDVD 7 at the end of July and found all my DVD Audio discs failed to play.
Intervideo (as usual) refused to respond to my technical support queries when I enquired as to whether the DVD audio support was removed in view of the breach of the DVDA encryption.
Thankfully the previous version was still available for download (after much searching on the web) - WinDVD.Platinum.7.0.Release.2.Build 27.07Using a new activation key from the Intervideo website STILL didn't enable DVDA playback on this previous version however.......... I was able to fudge this using the original purchase activation key by changing the PC system date to within 0 days of my initial activation key supply which I had stored in an email.Hey presto - back to WinDVD DVDA support!Intervideo are being very crafty.... they have updated the WinDVD website to remove all references to DVD Audio support and then were answering my technical support queries as if I wasn't configuring my PC correctly.
What versions of DVD Audio playback software are you using?
Creative DVDAudio player? WinDVD (version?)

Premiere elements 11 does not recognize blu ray burner

Purchased Pawtec external blu ray burner. Premiere elements 11 recognizes it as a dvd burner but not a blu ray burner. How can I fix this?

Long160
There is no burn to folder for Blu-ray in Premiere Elements (any version), so we cannot use that escape route. What has been used in the past as a workaround for this "no burn to folder for Blu-ray" is creating a Blu-ray disc image with Premiere Elements in conjunction with a virtual Blu-ray burner with a virtual BD-RE disc. I have written about that in the following blog post
http://www.atr935.blogspot.com/2013/11/pe12-disc-imagephantom-burner-pe.html
But, as for the Pawtec external Blu-ray burner being recognized in the Premiere Elements 11 burner location in burn to Blu-ray,
a. you may just have an external Blu-ray burner that is not compatible with Premiere Elements
b. you could try for a Premiere Elements 11 uninstall/reinstall going the route of Deactivation with in the program (Help Menu/Deactivate), uninstall via regular Control Panel route, ccleaner run through (https://www.piriform.com/ccleaner), reinstall.
Have you tried another USB port? Does the Blu-ray burner require one or two USB connections to have enough power for functioning?
Also, do you have all you operating system updates?
More later.
ATR

Adobe Elements catalog backup fails after 3 discs. Message says something wrong with dvd writer. I bought an external dvd burner and changed disc brands, still the same results.

Full backup of catalog stops after three discs. I have changed disc brand and added a new external dvd burner but still get the same results. What is wrong?

If you have the hard drive space, see if you can complete a back up to the hard drive instead. If that works successfully, it could be a buffer or caching issue with the burner. It could be running out of space because it is not clearing after each disk burn.

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

DVD Burn fails (Error code 0x80020022), newish drive, just applied updates

Hello,
when i try to burn a data dvd with a variety of files from finder on my power mac g5 it thinks a while and then fails with the message:
Burning the disc failed because communication to the disc drive failed (Error code 0x80020022)
I just downloaded the latest OS updates last night.
Disc utility showed permissions problems in some files on my boot drive including in a darwin folder but they repaired fine.
Two weeks ago apple replaced my superdrive and i hadn't tried burning a dvd since then, but cds did and do burn fine.
This computer is under warrantee but in case the latest software updates caused this, or if someone has an easy fix that would allow me to save the trip to the store for analysis and potential couple day wait...
i'm all ears!
Thanks, Will
Software overview
System Version: Mac OS X Server 10.4.8 (8L127)
Kernel Version: Darwin 8.8.0
SONY DVD RW DW-U21A:
Firmware Revision: AADB
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
hardware
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (2.2)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (2.2)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Power Mac G5 Mac OS X (10.4.8)

Thank you for your help!
At one point in the last few days i did run out of disk space on one drive, but i think i had 5Gig free on the short drive when i was trying it earlier, and i have upped that to 30.
My spindled HP DV-16Xs worked on the drive i had before pretty darn well.. I've tried a bunch of unlabeled ones, i've also tried burning at 1x, and i went out and bought some jewel cased verbatim dvd-r 16Xs, same problem.
I will take one more shot at finding the best media using that website, get some 8Xs if i can find them, before hauling it into apple.
without the dvd burner it's hard to backup very well, I was planning to get a external hard drive next month.

DVD Burn fail, Sense Key = Hardware Error, Sense Code = 0x09, 0x01, TRACKING SERVO FAILURE, What could be the solution?

DVD Burn fail, Sense Key = Hardware Error, Sense Code = 0x09, 0x01, TRACKING SERVO FAILURE, What could be the solution?

There is only one option and that is to replace the drive. It is not expensive to perform the replacement yourself if you so choose.

Burn to Lightscribe DVD+R media on External LaCie d2 DVD burner fails

Recently the Superdrive in my iMac G4 has failed where it would no longer burn DVD's reliably. I purchased a LaCie external firewire DVD burner and have been very impressed with its speed and overall compatibility.
I have created several DVDs from iDVD 5.0.1 (written to disk images) and then burned them to DVD-R media using "Disk Utility" with no problems. When I tried to burn them to LightScribe DVD+R media, the burn occurs with no errors and the DVD mounts and plays fine from the LaCie burner. However, trying to play the DVD from my original SuperDrive or in my home DVD players, does not work.
Is there some incompatibility I am unaware of? I believe I created one lightscribe DVD from Toast 7 where I was playing around with duplicating an existing DVD I had and it worked fine. I think the media I used in that case was one provided with the drive and I burned it from toast.
My lightscribe media is Verbatim LightScribe DVD+R media (30 pack). I don't want to consider these coasters. Any suggestions or help is greatly appreciated.

My internal SuperDrive has this profile:
PIONEER DVD-RW DVR-104:
Firmware Revision: A227
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
=======================
My external LaCie drive has this profile:
TSSTcorp CD/DVDW SH-W162L:
Firmware Revision: LC00
Interconnect: FireWire
Burn Support: Yes (Vendor Supported)
Profile Path: /Library/DiscRecording/DeviceProfiles/LaCie.drprofile
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
It identified write restrictions, but my goal was to write a playable DVD and it fails in both my SuperDrive and off-the-shelf DVD players.
Thanks for the idea, but I'm not sure that this is the issue in this case. Is there some basic compatibility issue with using DVD+R media as a playable DVD for most off-the-shelf players?

[solved automagically]dvd burner detected... but I can not burn! :(

Hi!
In the latests kernel upgrades (3 or 4 weeks) I lost my dvd burn capabilities...
it was working previously...
apparently dvd drive is detected properly, I can see dvd contents, etc... but brasero do not give me an option to burn on it (just shows .iso file)
that is happening in my desktop, and laptop too.... any idea?
Last edited by luuuciano (2009-12-14 16:09:05)

yep, I tried wodim --scanbus with the same result (as root too)
here, the lshw output:
# lshw
azuloidesk
description: Desktop Computer
product: System Product Name
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2 uuid=A0C9C96D-8DFE-D511-98A0-001D60839382
*-core
description: Motherboard
product: M2N-MX SE
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev x.xx
serial: MS6C79B33905155
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 0403 (08/20/2007)
size: 64KiB
capacity: 448KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu:0
description: CPU
product: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+
vendor: Advanced Micro Devices [AMD]
physical id: 3
bus info: cpu@0
version: 15.3.2
serial: To Be Filled By O.E.M.
slot: CPU 1
size: 1GHz
capacity: 2600MHz
width: 64 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp x86-64 3dnowext 3dnow extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy cpufreq
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 128KiB
capacity: 256KiB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 1MiB
capacity: 2MiB
capabilities: pipeline-burst internal varies unified
*-memory:0
description: System Memory
physical id: 29
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-cpu:1
physical id: 4
bus info: cpu@1
version: 15.3.2
size: 1GHz
capacity: 1GHz
capabilities: cpufreq
*-cache:0
description: L1 cache
physical id: 0
size: 128KiB
*-cache:1
description: L2 cache
physical id: 1
size: 1MiB
*-generic UNCLAIMED
physical id: 123
bus info: parisc@123
*-memory:1 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:00.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration: latency=0
*-isa
description: ISA bridge
product: MCP61 LPC Bridge
vendor: nVidia Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
resources: ioport:900(size=256)
*-serial
description: SMBus
product: MCP61 SMBus
vendor: nVidia Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0
resources: irq:10 ioport:dc00(size=64) ioport:600(size=64) ioport:700(size=64)
*-memory:2 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: 1.2
bus info: pci@0000:00:01.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-usb:0
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:20 memory:dffff000-dfffffff
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.31-ARCH ohci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=8 speed=12.0MB/s
*-usb
description: Keyboard
product: USB Keyboard
vendor: CHESEN
physical id: 4
bus info: usb@2:4
version: 1.10
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=1.5MB/s
*-usb:1
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:21 memory:dfffec00-dfffecff
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.31-ARCH ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480.0MB/s
*-pci:0
description: PCI bridge
product: MCP61 PCI bridge
vendor: nVidia Corporation
physical id: 100
bus info: pci@0000:00:04.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pci ht subtractive_decode bus_master cap_list
resources: ioport:e000(size=4096)
*-multimedia
description: Multimedia audio controller
product: SB Live! EMU10k1
vendor: Creative Labs
physical id: 6
bus info: pci@0000:01:06.0
version: 0a
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=EMU10K1_Audigy latency=64 maxlatency=20 mingnt=2
resources: irq:19 ioport:ec00(size=32)
*-input
description: Input device controller
product: SB Live! Game Port
vendor: Creative Labs
physical id: 6.1
bus info: pci@0000:01:06.1
version: 0a
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=Emu10k1_gameport latency=64
resources: irq:0 ioport:e880(size=8)
*-multimedia
description: Audio device
product: MCP61 High Definition Audio
vendor: nVidia Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm msi ht bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:dfff8000-dfffbfff
*-ide:0
description: IDE interface
product: MCP61 IDE
vendor: nVidia Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
*-bridge
description: Ethernet interface
product: MCP61 Ethernet
vendor: nVidia Corporation
physical id: 7
bus info: pci@0000:00:07.0
logical name: eth0
version: a2
serial: 00:1d:60:83:93:82
size: 100000000
capacity: 1000000000
width: 32 bits
clock: 66MHz
capabilities: bridge pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 duplex=full ip=192.168.0.33 latency=0 link=yes maxlatency=20 mingnt=1 multicast=yes port=MII speed=100MB/s
resources: irq:27 memory:dfffd000-dfffdfff ioport:d480(size=8)
*-ide:1
description: IDE interface
product: MCP61 SATA Controller
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
logical name: scsi2
logical name: scsi3
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list emulated
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:23 ioport:d400(size=8) ioport:d080(size=4) ioport:d000(size=8) ioport:cc00(size=4) ioport:c880(size=16) memory:dfffc000-dfffcfff
*-disk:0
description: ATA Disk
product: ST380013AS
vendor: Seagate
physical id: 0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: 3.18
serial: 3JVBP8E2
size: 74GiB (80GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=2d172d17
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: e4ab96d3-fb4d-4eb6-b1ab-3349147e44a3
size: 14GiB
capacity: 14GiB
capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2008-10-30 13:28:14 filesystem=ext3 modified=2009-11-24 14:14:40 mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback mounted=2009-11-24 14:14:40 state=mounted
*-volume:1
description: Windows FAT volume
vendor: MSDOS5.0
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
logical name: /mnt/winxp
version: FAT32
serial: 2ce5-cee4
size: 5141MiB
capacity: 5145MiB
capabilities: primary bootable fat initialized
configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,nosuid,nodev,noexec,relatime,fmask=0111,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,errors=remount-ro state=mounted
*-volume:2
description: Linux swap volume
physical id: 3
bus info: scsi@2:0.0.0,3
logical name: /dev/sda3
version: 1
serial: b5b78777-7852-4575-a8c2-7b8e57283778
size: 1027MiB
capacity: 1027MiB
capabilities: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@2:0.0.0,4
logical name: /dev/sda4
size: 53GiB
capacity: 53GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux filesystem partition
physical id: 5
logical name: /dev/sda5
logical name: /home
capacity: 53GiB
configuration: mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback state=mounted
*-disk:1
description: ATA Disk
product: WDC WD1600JS-55M
vendor: Western Digital
physical id: 1
bus info: scsi@3:0.0.0
logical name: /dev/sdb
version: 02.0
serial: WD-WMANM1362942
size: 149GiB (160GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=013e1410
*-volume
description: Windows NTFS volume
physical id: 1
bus info: scsi@3:0.0.0,1
logical name: /dev/sdb1
logical name: /mnt/enos2005
version: 3.1
serial: c8bfcbc3-28a7-5d4a-b1f4-ef372f1b6da6
size: 149GiB
capacity: 149GiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2005-12-12 22:57:50 filesystem=ntfs label=ENOS2005 mount.fstype=fuseblk mount.options=rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 state=mounted
*-pci:1
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: 9
bus info: pci@0000:00:09.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:24
*-pci:2
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: b
bus info: pci@0000:00:0b.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:25
*-pci:3
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:26
*-display
description: VGA compatible controller
product: C61 [GeForce 6150SE nForce 430]
vendor: nVidia Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a2
width: 64 bits
clock: 66MHz
capabilities: pm msi vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:22 memory:de000000-deffffff memory:c0000000-cfffffff(prefetchable) memory:dd000000-ddffffff memory:dffc0000-dffdffff(prefetchable)
*-pci:4
description: Host bridge
product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: K8 [Athlon64/Opteron] Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: K8 [Athlon64/Opteron] DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: K8 [Athlon64/Opteron] Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=k8temp
resources: irq:0
and, looking at that, the k8temp do not work properly, it shows an error at startup (that happened in the latests kernel upgrades too, I guess)
Currently I have this in my fstab (as it was working previously)
/dev/cdrom /media/cdrom auto iocharset=utf8,ro,user,noauto,unhide 0 0
/dev/cdrom1 /media/cdrom1 auto iocharset=utf8,ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
but I tried commenting those lines without not luck
Last edited by luuuciano (2009-11-24 21:34:49)

My DVD burner is not recognized by Premier Elements. Burns fine in Nero.

Premier Elements will not find my DVD burner. It works fine in Nero. I have been to tons of help site. Removed registry filters, uninstalled and reinstalled. Same problem.

A Nero module MAY be your problem
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
Set your Premiere Elements DVD output to a folder on your hard drive and then use the FREE Imgburn to burn the folder to disc for DVD... Premiere Elements 13 WILL write a DVD or BluRay to an ISO (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons... Set Imgburn to use the slowest burn speed your drive and media will use... I set my burn speed to 1x and let Imgburn adjust to the actual minimum

A slide show with audio created in PSE 9 plays fine in edit. When brought to Premier Elements for dvd burn, the audio no longer plays. It appears in the edit, but no audio is played. This happens consistently. What setting might be wrong?

A slide show with audio created in PSE 9 plays fine in edit. When brought to Premier Elements for dvd burn, the audio no longer plays. It appears in the edit, but no audio is played. This happens consistently. What setting might be wrong?

H-SPhoto
That Photoshop Elements 9.0.3 Update has generally been discouraged by the Photoshop Elements gurus. But, I am not going to factor that into this at this point.
This is what I would ask you to look at in the Elements Organizer 9 accessed from the Photoshop Elements 9 or Premiere Elements 9.
a. Create your slideshow in the Elements Organizer 9/Create/Slideshow/Slideshow Editor. Then use the Output option of Edit with Premiere Elements.
From your description, you are probably using the Output Option of Burn to Disc DVD which will take your slideshow directly in the Disc Menu section of Premiere Elements 9. The preferred transfer of the Elements Organizer 9 slideshow to Premiere Elements 9 Editor is by the non wmv route "Edit with Premiere Elements" not the wmv route of Burn to Disc DVD.
Let us explore if any of the above is involved in your issue and then we will decide what next if necessary.
Thanks.
ATR

I have purchased Adobe premiere element 12. Why can't I burn a CD or DVD? Do I need an additional program?

I have purchased Adobe premiere element 12. Why can't I burn a CD or DVD? Do I need an additional program?

See here:
Adobe Premiere Elements Help | Sharing to DVD or Blu-ray Disc

T500 dvd burner fails hl-dt dvdram gsa-u20n

my dvd burner has failed strangely -- the dvd-r and dvd+r fail to burn. However I can burn cd-r and dvd+rw.
I have tried many blank disks(dvd-r) . I reloaded to device driver.
I tried the lenovo diagnostics which give an error code for dvd-r of 2102H
and an error code of 0c00h for dvd+r
Any help on figuring whether the burner hardware is broken or there is some other problem software etc.
The firware level is HX10 and the driver is usoft, date 7/1/2001, version 5.1.2535.0

I did finally burn the disk. However, I am going to close out the problem. I borrowed an external burner and was able to burn a a blank dvd that failed to burn previously.
Somebody suggest to me that I reseat the dvd burner from my laptop. I puled it out pushed it in then it worked one time
before failing. I then tried puling it in and out several times and it seems to be working. I know this may not be a perfect solution as it indicates that the contacts may have a problem.
My ultimate thought is to buy an external burner and use the ultra bay(which has the dvd burner) for more storage.
Thank you for your diagnostic suggestions.
I'll carry the pcdoctor disk in case I have future problems.

Premiere Elements 11: DVD Burn horrible quality.

Hello!
I am having issues with getting a decent playback on a video I cut together for a friend.
It involves video shot with some high resolution images inserted in the bottom corners.
When I save as a .mpg file the quality is great, but when I choose burn to DVD with high quality both the video and images are extremely blurry and look to have been made low resolution.
There is only about two minutes of video so available space is not a concern. I've also unchecked "Fit Contents to available space". Is there a fix or work-around for getting a better quality DVD burn?
Edit: After more research I seem to have come across a common problem in that Premiere Elements cannot burn a decent quality DVD without using certain settings that unfortunately can only be played on Blu-ray players. I'm still hopeful that someone, somewhere, has found a way to get it to work with better results than sub-par.

DaVeachi
Problems with the same symptoms can (often do) have different causes. The answers are in the details.
On what computer operating system is your Premiere Elements running on?
A just in case note at the onset....DVD-VIDEO on DVD disc has a frame size of 720 x 480 (NTSC) or 720 x 576 (PAL) whether
DVD-VIDEO standard 4:3 or standard widescreen 16:9. "HD video" can have frame size of 1280 x 720, 1920 x 1080, or 1440 x 1080 HD anamorphic 16:9 which is stretched to 1920 x 1080 for display after encoding.
What are the properties of the source media on that Timeline - video and audio compression, frame size, frame rate, interlaced
or progressive, file extension, pixel aspect ratio?
What is the project's project preset that you or the project is setting? See Edit Menu/Project Settings/General Editing Mode, Timebase,
Frame Size. The program does not always give the "right" setting and defaults to 1080i which may not be a good match for your source.
Then you set the project preset yourself and then import the source.
If interlaced video source, field order may enter into the equation since DVD-VIDEO on DVD disc is characterized by interlaced video, lower field first.
You talk about what sounds like picture in picture. What are the pixel dimensions of these photos that you are using for the picture in picture. How many of them are there in this Timeline?
You are not doing yourself any favors leaving "Fit Content to Available Space" unchecked. More on that later and advise put a check mark for that option. Important...when you are in the burn dialog for your typical project, what does the Quality Area there show for Space Required and Bitrate (with and without a check mark next to "Fit Content to Available Space"?)
What are selecting for your preset standard 4:3 or standard widescreen 16:9 type, and is your program install for NTSC or PAL.
Let us start here and then decide what next.
Thank you.
ATR

Elements 11 fails to detect my DVD burner...

Similar Messages

Maybe you are looking for