Elements 11 fails to Export to Revel

I had tried to export 50 photos (the monthly limit) to Revel of which 21 uploaded, then I received a message of export failed "try again later".  Over the next week, I have continued to try to Export a single (a test) jpg photo from Elements 11 to Revel using the Export function, but continue to get the same error message.  My monthly 50 photo limit has not been reached but I continue to be unable to Export to Revel.  What do I need to do to be able to Export the additional 29 photos?

Pattie,
I went to adoberevel.com and tried to upload the same picture directly (also several other pictures later) to get an error message that it was not uploaded because it is a duplicate.  Therefore, the problem must be at the revel level.
Any ideas of what I can do?  This photo is not uploaded and I could not find it in revel.
Thanks,
Stephen

Similar Messages

  • Error "Failed to Export PDF" with big image on CS6 (32) and CC (64)

    Hi everyone,
    I'm on indesign CS6 (v8.0.2) and when I try to export pdf with a very big image ( *.tiff, 25000*35000 pixels, ) , the action failed with this message :" Failed to export a PDF".
    To be sure that there is no any corrupted elements, I made a very simple layout (one page , and just one element for my image,I turnoff prefilgth and all  ressource intensive options, and export with no downsampling or resampling) and try to export with different size image:with 20000*30000 -or smaller -image the export works, always failed with image .The export failed to in scripting mode.
    If I diveded my image in four , the export works but this solution is not convenient (I actually made tests for a fully automatised process, and we want to be sure that the indesign  component is  enough "safe")
    I try the same action with an evaluation version of indesign CC 64 bits (v9.2) and have the same behavior.
    I can imagine that there is a memory issue there, but my config seems to be strong ( windows server 64 with  16GB ram, DD with more than 100GB free). I don't undersant why-in a "full" 64 bit environnement- it is not possible to manipulate and export very large image ?
    I'm wonder If the background task is a part of the problem, and if it 's possible to disable it in CS6 or CC as in cs5 ( creates an  “DisableAsyncExports.txt” file in  Adobe InDesign executable directoty don't seems to disable it  in CC or CS6).
    Thank you for your help and good ideas..
    DC.

    this is a .tif (not a "big"tiff) compressed in LZW or ZIP.
    I just tried with another format (png), the error is the same...

  • Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

    When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
    Error in Crystal Report:  Failed to export the report.
    This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter).  We have other subreports (within this same report) that print a sql image just fine.  But, when this subreport prints, the above error appears.
    I can run the same report on an XP machine without error.
    Exportmodeller.dll and crtsv.dll are both installed and registered to the
    C:\Program Files\Common Files\Business Objects\3.0\bin folder
    I have tried opening the report, removing the image, and then adding it back in again to the subreport.
    Still receive the same error.
    Any suggestions?

    >
    Don Williams wrote:
    > RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
    >
    > Upgrade to the .NET components and post your question to the .NET forums.
    >
    > Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
    Don,
    Can you please clarify?
    Our VB6 app that uses Crystal XI RDC runtime components.  Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer).  We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
    We can print/preview/export to excel, but the pdf creation is failing with this error.
    We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue).  Therefore, we have to rollback our .NET product and revert to the RDC code. 
    Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
    When you say  "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
    Thank you

  • Premiere elements 12 organizer blocked by revel screen

    I just installed Premiere Elements 12.  When I open the organizer, immediately a screen promoting Revel comes up, blocks organizer and there is no way I can find to close it.  Can anyone help?
    Thanks
    engelsda

    engelsda
    Could you provide a screenshot of this Revel promotion that you are seeing when you open the Elements Organizer?
    Are you using purchased or tryout Premiere Elements 12 and on what computer operating system?
    What are you doing to initiate the promotion?
    a. You open the program to the Welcome Screen and select Elements Organizer and then the Revel pops up blocking the Organizer?
    b. Something else?
    Let us start here and then decide what next.
    Thank you.
    ATR

  • Failed to export the report in Crystal Reports 2008

    I am using Crystal Reports 2008 version 12.1.0.892, when i try to export data to Microsoft Excel(Data Only) it's failing with the error "Failed to export the report.", please help in resolving this issue.

    Hi Abhilash,
    I tried suppressing the report header and page header it was working fine, but previously i used to export with all the headers. Without page headers the output file is of no use. I was facing the same issue on one of the local desktops too then i uninstalled the software and installed it again then it was working fine but its not the solution.
    -Srikar

  • My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?

    My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?
    thanks

    for windows you should have an exe and a 7z file.  put both in the same directory and double click the exe.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Failed to Export pdf despite having done so very recently?

    I'm currently putting together a 60 page book and for weeks previously, I've been able to export it as a high quality pdf for test prints and analysis but for some reason last night, when I put in the final image for the book, it gives me this 'Failed to Export Pdf' message, despite me making a pdf of the final-imageless version a half hour ago. When I removed the final image from the document, it still gives me the same error message. When I tried to hunt down what page is giving it the most problem, it seemed to be a page that was previously just fine according to inDesign? And when I tried to work with an older version of the document to see if I can work from that one, it gives me the same problem. It SHOULD be fine but for some reason it isn't.
    I use Windows 7 and I have inDesign CS2.

    Asiide from CS2 not being supported on Windows 7, so you're pretty much on your own, see Adobe Community: File Crashing on Output - printing/PDF/other for troubleshooting tips.

  • "Failed to Export PDF"

    Dear Friends,
    when trying to export a document in Indesign CS4 as PDF-file, I get an error message:
    Adobe InDesign
    Failed to Export PDF.
    OK  
    After dismissing this dialog, the export-process quits and no PDF-file is created.
    There aren't any further notice-, warning- or error messages.
    The document itself should be valid, no links are missing or update-needing and all in used fonts are available on the system Indesign is running.
    I had already searched for a solution, or at least a reason for this error message, and found the following pages, dealing with that error message:
    "Failed to Export PDF" when you downsample large images while exporting to PDF (InDesign)
    I disabled downsampling in PDF-export dialogue as it is mentioned in the help file, but the error message still occures.
    InDesign error "failed to export the pdf file"
    I ungrouped everything by selecting all objects on each of these two pages and ungrouping as many times as the option was available as it is described on the page, but the error still stays.
    Interestingly, removing the second sheet (=page) of this originally two sheet consisting Indesign document leads to a successful PDF-document export.
    But I want to export both sheets, not only the first one, into one single PDF-document.
    So there must be probably something on sheet number two which prevents a successful PDF-document export resulting in the error message mentioned above.
    Because there are no further informations provided except that the export failed, it is not very easy to track down the reason for this problem.
    Is there a log file for export or general application issues?
    Maybe you have also experienced this error during the past and maybe even know some walkaround or hint which could lead to the reason?
    Thank you for your answers in advance!
    With best regards
    Inno

    Thank you for your answers!
    Exporting page 2 alone leads to an PDF-export-error.
    The error happens when PDF-file finalization is in progress.
    I found out that embedded PSD-files caused the problem.
    After un-embedding them, the PDF-export worked well, also for both pages.
    Now however, there are still some questions open:
    Why do embedded PSD-files cause an export-failure during PDF-export?
    Why aren't any information given to user about this failure?
    With best regards
    Inno

  • Failed to export the JPEG file

    When I attempt to export a jpeg from InDesign I get the following error message, please help:
    "Failed to export the JPEG file: File cannot be written.
    Disc may be locked or full."
    The disc it is writing to has 90Gb of memory free and I've tried knocking the quality of the export down with no success.
    I am running CS6 on a fully updated Macbook Pro.
    Thanks.

    I'm trying to export to the hard drive on the Mac as usual, and have never had this issue before?

  • InDesign CS6 "Failed to export the JPEG file. File cannot be written. Disk may be locked or full."

    I get this error "Failed to export the JPEG file. File cannot be written. Disk may be locked or full." when sending small (3"x3") and large (40"x60") files to a printer hot folder. Sometime if I close the program and restart it will let me export. What could be causing this to happen?
    I am on Windows 7 with 4GB RAM PC.

    I guess the printer is grabbing the file before it is entirely written…
    Workaround: Do not save to a hot folder. Move the files after exporting to the hot folder.
    Uwe

  • Content generation error. [Error: Failed to Export the PDF file.]

    Hi;
    Everytime i try to update an article within a folio in DPS folio builder i get this error :
    Content generation error.
    [Error: Failed to Export the PDF file.]
    My colleague next to me is running exactly the same set up and doesnt get the error. in fact his update anf sideloading is fast as lightning.
    the ONLY difference is that im running v28 tools and he is on v27, however wehave another colleague running v28 and his updates work perfectly.
    Any ideas lovely community?
    Scott

    Hi Bob;
    Have tried that one. And again on your suggestion....no luck.
    Scott

  • "Content generation error. Failed to Export the PDF file"

    Building a multi-folio in InDesign 6 Folio Builder V30. Received "Content generation error. Failed to Export the PDF file" on several of the spreads. I have tried reducing the original pdf files sizes, but that did not help.
    Any suggestions on other possible causes or way to fix.?
    thanks
    Christopher Huber
    MMN

    I'm very new to DPS so I hope the following description makes some kind of sense.
    My magazine is in the process of doing trial runs for an iPad edition. I'm setting some templates up for us to work off so the process from magazine to iPad will run a lot smoother month to month.
    So far I've set up some dummy stock pages in an InDesign CS6 document, currently 15 pages long.
    All images are linked and all fonts have paragraph styles applied to them.
    I'm at the stage I want to check the document on my iPad to test run font sizes and their legibility.
    We have successfully been able to export the document as a jpg file but we really need the PDF format. When attempting this we get the above message.
    Sonia.

  • Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the

    Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the problem
    Please some one help on this

    You need to try exporting the first half of the book.
    If that exports ok then export the other half of the book.
    Whatever half it fails on - keep dividing the book in half to find the culprit page or pages.
    For example if your book is 128 pages long:
    1. Export pages 1 - 63
    2. If these Fail to Export then
    3. try exporting1-32
    4. If these Fail to Export
    5. then try exporting1-16
    If it doesn't fail (step 2)
    Then export pages 64-128
    and 64-90 etc.
    until you find the pages causing the issues.

  • How to transfer the photo captions from Photoshop Elements 12 organizer to Adobe Revel albums ?

    How to transfer the photo captions from Photoshop Elements 12 organizer to Adobe Revel albums ?

    Thks for the contribution. However, it seems I cannot solve my problem with the kindly proposed solution.
    Let me rephrase my problem:
    I off-line prepare, organize photos and also add manually individual photo captions with PE12 Organizer. In the properties panel, I can check that the photo properties (including captions) are properly associated with the photo.
    However when I upload on Revel -directly with PE12 Organizer (selecting Share/Private Web Album)- these individual (accordingly captioned) photos or albums, I cannot find the photo captions (i.e. the photo caption did not directly show up with the photo in Revel). This obliges me to a double work by copying  and pasting each photo caption.
    Is there any plan to get rid of that ?
    Let me add that I am using the French version of PE12
    De : 99jon 
    Envoyé : jeudi 8 mai 2014 00:03
    À : Michel ROUSSEAU
    Objet :  How to transfer the photo captions from Photoshop Elements 12 organizer to Adobe Revel albums ?
    How to transfer the photo captions from Photoshop Elements 12 organizer to Adobe Revel albums ?
    created by 99jon <https://forums.adobe.com/people/99jon>  in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6363397#6363397>

  • Failed to export using the options you specified. Please check your options

    Hi..
    i was using crystal report10.5 with visual studio 2008(c#)..
    now im migrated to visual studio 2010....and i have installed these setups http://www.sdn.sap.com/irj/boc/crystalreports and http://www.sdn.sap.com/irj/sdn/crystalreports-dotnet ...
    when i open my project it will ask to convert crystal reports and i have converted ...reports are working fine but in tool bar if i click and select a pdf format to export it will display a error message Failed to export using the options you specified. Please check your options and try again. and if i click on print button it is not working(i have set printmode=pdf)...when i was working on vs2008 both were working fine but in vs2010 it is not working..

    Hello,
    What type of app you are using? A win app will not have this option. Also what FW are you using? Have you made changes to the viewer(after migrating) and ensure that you are using the 13.0.2000.0?
    Take a look at [this|Export and print problem; thread, also.
    Thanks.

Maybe you are looking for

  • Print iCal Calendar - ? Portrait View

    Is there a way to print my iCal Calendar in Portrait View other than saving it as a .pdf file & then printing? I cannot find the Portrait - Landscape options when printing in iCal. Many thanks! ...John

  • Having trouble with 10.4.6 update - ipod and isight issues

    Hi everyone. Got my first mac a few weeks ago, and ran a host of updates all at once, so to be honest, I'm not sure which one is causing the problem. However, since running the following, my built in isight no longer works, telling me "no camera is a

  • What can OS X 10.3.9 users do?...

    What can OS X 10.3.9 users do?... An error appears at http://maps.bpl.org > You are trying to install Adobe Flash Player on an > unsupported operating system. For system requirements, > please visit: > Flash Player System Requirements http://www.adob

  • Missing Pre-order DLC for Bloodborne

    Hi, I pre-ordered Bloodborne for PS4.  I did it online with in-store pick-up on release.  I searched the receipt, emails, account info on my online account and don't see a code anywhere.  I put a link to the item I was supposed to get below: http://w

  • How to create Activity to a Service Call

    Hi, how can i create an activity to a service call? i have to create an activity first and then add a line in the activities collection of the service call, right? but i always get an error message, when i want to create the contact. Error-Message: "