Elements 11 not reading .CR2 files

I just purchased and installed PS Elements 11 and it seems to be unable to read the .CR2 raw files from my Canon 6D although according to the website this camera is supported.

Make sure your camera raw plug-in is up to date.
From Expert Mode click:
Help >> Updates
Install ACR 7.4 if available.

Similar Messages

Photoshop CS4 not reading .CR2 files with Yosemite

I just updated my computer to a new iMac with Yosemite. I transferred the data using Time Machine. I uninstalled and then reinstalled Photoshop CS4. Now when I try to open my .CR2 camera files, I get an error message in Photoshop: "Could not complete this request because Photoshop does not recognize this type of file." Any help would be greatly appreciated. I have thousands of .CR2 files...

In Photoshop, click Photoshop > About Plug-Ins > Camera Raw
Which version of Camera Raw is shown?
Try manually updating to 5.7
Adobe - Photoshop : For Macintosh : Camera Raw 5.7 update

Photoshop CS3 Not Reading CR2 files ( Suddenly stopped reading!)

Hi All...
      I have been using photoshop CS3 for years now to work on CR2 Camera Raw formats ( Canon 40D). After months of not working on any photos
      now that i try to open any CR2 file i receive the message that says :
      "Photoshop Does not recognize this type of file"
        I have OS 10.5.8
        I searched Adobe website and did download Camera Raw 6.6 convertor but i think it is not a correct application for CS3.
        I would appreciate if you can provide the link for the correct upgrade for me or let me know how can i fix this problem. thanks

Photoshop CS3 can take only up to Camera Raw 4.6. Camera Raw 4.6 DOES understand Canon 40D files.
I don't know why it would have stopped working for you, but a good start would be to make sure you have 4.6. Go to the Help - About Plug-in... menu (might be in a different place than Help on a Mac; I'm a PC guy) and look for Camera Raw.
If you don't have Camera Raw 4.6, go to this page:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
If after ensuring you have Camera Raw 4.6 you still see the problem, I would worry that somehow your photo files have become corrupted, or that something else is wrong with your system. Let us know here if the problem persists.
-Noel

Elements 9 reading CR2 files

Elements 9 has been opening CR2 files just fine with my Canon 7D. But I get "wrong type of file" error with my new Canon 5D Mark III. I have searched all over the Adobe website to get a new plugin, and am totally unsuccessful.
Can anyone tell me what the problem is?

Perhaps you need a DNG converter from the official site:
Windows:
<http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5694&fileID=
5707
<http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5694&fileID=5707>>
MAC:
<http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5695&fileID=
5706
<http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5695&fileID=5706

PS will not open .cr2 files

PC crashed. After re-install my CS3 version of Bridge and PS will not open .cr2 files whereas they did open theses files prior to crash. Lightroom still able to open same files. Please guide me to answer as am doing wedding for daughter's friend in 2 weeks and now am sweating bullets. Is it drivers, camera (Canon 50D) or something else?
TIA

The Camera Raw plug-in does not follow the rules of computer literacy.
I should have advised you to read the instructions on the download page.
You have to delete or move out the original plug-in from:
C:\Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats
And then place the downloaded version 4.6 in there.
It will not overwrite the old one, which has to go!
(To be certain of success, do a search for other instances of the file Camera Raw.8bi and delete them.)

Photoshop CS4 stopped reading CR2 files. Update failed.

My Photoshop CS4 quit reading CR2 files from my Canon EOS 5D Mark II. Photoshop update with new raw version failed. Please advise.
And many thanks!

This screen shot shows the correct path to the appropriate folder in CS4 on the Mac, which is not called "ACR folder" (that must be a Windows thing).
The version of ACR in the image is older (5.2, obsolete by now), because it's a screen shot from many moons ago.
The important thing is to start the path in the ROOT LEVEL Library, not your username or home Library:

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files. I have downloaded iMac library manager and can see them. can someone shed some light please ?

i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?

So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

Adobe 11 will not read my files.

I have downloaded Adobe 11 several times, with and without the anti-virus set, and though it recognises my files Microsoft reports it had 'encountered a problem and is closing it down' when I try to open them. When I restore the system to Adobe 9 it opens my old files but, obviously, not those in '11' format. Any ideas?

Well, it's like this. Someone sends me some printed information. A bill.
A report , It downloads. I try to open it and it tells me I need Adobe
Reader 11 to do so and gives me a link. . I download from the link. It
takes an age but in the end it tells me I have successfully downloaded Adobe
Reader 11. When I try to open the file Microsoft tells me they have
encountered a problem and are closing it down. When I try to open any of my
saved Adobe Reader files I then get the same message. I have to use System
Restore to get the facility of Adobe Reader 9 back. Then it opens my saved
files again.
In a message dated 04/11/2012 02:36:32 GMT Standard Time,
[email protected] writes:
Re: Adobe 11 will not read my files.
created by Pat Willener (http://forums.adobe.com/people/pwillener) in
Adobe Reader - View the full discussion
(http://forums.adobe.com/message/4821557#4821557)

Illustrator files cannot be opened: Could not read the file because an error has occurred.

I cannot open some files from Illustrator which contain PNG files placed. When I try to open the file, I get a message saying: "this png contains addtional data for Adobe fireworks, which will be discarded upon save." When I press "ok" I get the same screen again. When I press "cancel" I get: "coulld not read the file because an error has occured". I am currently working on a Mac Mavericks. Using Illustrator cc and Fireworks CS6.

Eliana,
If you have some file corruption, one thing often tried first is to create a new document and File>Place the (PDF contents, if any of the) corrupted one to see how much may be rescued that way.
Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
http://www.illustrator.fixtoolbox.com/
As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html

Adobe Reader will not read pdf files on internet

I have lastest version of Adobe reader on a new mac running OS 10 Maverick. This has latest safari (7.0.1) as my internet browser. My adobe reader reads pdf files already present on my desktop, but will not read pdf files from the internet even after I allow "trust" this site. Can anyone help me to resolve the issue please. Is it a bug that Adobe has not solved??

Sorry if you did not understand my instructions.
Regarding bullet point 4: Check Reader >Preferences > Internet > Web Browser Options> The blessed app should be " /Applications/Adobe Reader.app"
You specified that you don't see the path, then it might be some problem in your installation.
Please see the attached image and let me know what you see on your system.
Regarding bullet point 5: Load PDF in Safari.
This means open any PDFs in Safari web browser.
Please make sure the below highlighted plug-ins are installed on your system by going to the specified path. And make sure the version of the below two plug-ins are 11.0.06. You can find the version by selecting the plugin and hit Command+i.
Go to your Main Hard Disk/Library/ Internet Plug-Ins/ AdobePDFViewerNPAPI.plugin
Go to your Main Hard Disk/Library/ Internet Plug-Ins/ AdobePDFViewer.plugin
Please let me know if these help.
Thank You

Why my device not read pdf-files in mail messages?

Qq
why my Nokia device not read pdf-file on mail message?

What is the operating system on that device?
Do you have Adobe Reader installed?
What exactly means "not read"?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

"could not read the file because the plug-in could not understand the file."

"could not read the file because the plug-in could not understand the file."
I keep getting this error when trying to open some of my illustrator files. Usually after trying 5 or 6 time it will mysteriously open without a problem. I've reinstalled Illustrator and that didn't work. I've uninstalled and reinstalled CS3 and that didn't work.
Why does it sometimes open and sometimes not???
I've lost I don't know how many hours screwing around with this and REALLY pissing me off!!!
AURGH!

I think this has something to do with the PNG plugin.

Elements 11 not reading .CR2 files

Similar Messages

Maybe you are looking for