Elements 11 Preference setting hung up while loading

I just bought elements 11 and just imported my photos from folders. I was then following directions from adobe re setting preferences and the program got hung up (Loading prompt never ended) with edit-preferences-folders. FYI I have a pentium quad core 2.80 GHz processer, 64 bit operating system and 4 GB of RAM

Similar Messages

FCP4 gets hung up while loading audio filters, then quits

I have only very cursory knowledge of Final Cut Pro. It is installed on my G4, and has been used successfully in the recent past.
Upon opening FCP4 without my iLok in, I am prompted to purchase or cancel using all of my Waves plugins for ProTools, one by one. When I use the iLok, then FCP4 gets hung up on loading the audio filters, and subsequently "unexpectedly" quits. I have tried shutting down and rebooting with the ILok in place - no luck there.
I was unaware that Waves even operated as a plugin inside FCP, yet opening FCP seems to require my Waves authorization, but when I give it, FCP crashes. What could my problem be?
This problem just started last evening after sporadic but successful use of FCP, as well as fully operational use of Waves plugins within ProTools.

AudioUnit Manager 1.1 will let you create default sets of AudioUnit plugins.
Third party components are usually to blame with FCP failing to start up.
With this free app you can create sets which are specific to a particular program.
For example, create a set for FCP with the all offending plugins disabled.
When you boot up, they are placed in a "disabled" folder and stay disabled until you launch a set that includes them.
Get AudioUnit Manager 1.1 here (free- donation ware)
http://www.grantedsw.com/aum/

TS1702 App hung up in "loading" mode while updating

I've got an app (Inkflow) that hung up while loading.
I can't open the app, restart it, or delete it by the usual procedures.
Any ideas?
Thanks.

From the article that your statement was posted from:
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

ORA-12709: error while loading create database character set

I installed Oracle 8.05 on Linux successfully: was able to login
whith SQLPlus, start and stop the db whith svrmgrl etc.
During this install I chose WE8ISO8859P9 as the database
characterset when prompted.
After that I installed Oracle Application Server 3.02, and now
I'm getting the
ORA-12709: error while loading create database character set
message when I try to start up the database, and the database
won't mount.
Platform is RedHat Linux 5.2.
NLS_LANG set to different settings,
e.g. AMERICAN_AMERICA.WE8ISO8859P9
but without success.
Anyone any clue?
Thanks!
null

Jogchum Reitsma (guest) wrote:
: I installed Oracle 8.05 on Linux successfully: was able to
login
: whith SQLPlus, start and stop the db whith svrmgrl etc.
: During this install I chose WE8ISO8859P9 as the database
: characterset when prompted.
: After that I installed Oracle Application Server 3.02, and now
: I'm getting the
: ORA-12709: error while loading create database character set
: message when I try to start up the database, and the database
: won't mount.
: Platform is RedHat Linux 5.2.
: NLS_LANG set to different settings,
: e.g. AMERICAN_AMERICA.WE8ISO8859P9
: but without success.
: Anyone any clue?
: Thanks!
You can create the database with WE8DEC character set
and to use the WE8ISO8859P9 on the client or even on Linux.
The NLS_LANG setting doesn't effect the database, but the
interface with the database. The same setting can be used in de
windows 95/98/NT registry.
null

ORA-12709: error while loading create database character set after upgrade

Dear All
i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
current application version 12.0.6
please help me to resolve it.
SQL> startup;
ORACLE instance started.
Total System Global Area 1.2831E+10 bytes
Fixed Size 2171296 bytes
Variable Size 2650807904 bytes
Database Buffers 1.0133E+10 bytes
Redo Buffers 44785664 bytes
ORA-12709: error while loading create database character set
-bash-3.00$ echo $ORA_NLS10
/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_SID=PROD
-bash-3.00$ pwd
/u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
-bash-3.00$ ls -lh |more
total 56912
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
-rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
-rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
-rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
-rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
-rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
-rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
-rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
-rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
-rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
-rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
-rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
-rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
-rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
-rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
-rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
-rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
System name: SunOS
Node name: proddb3.zakathouse.org
Release: 5.10
Version: Generic_147440-19
Machine: sun4u
Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
System parameters with non-default values:
processes = 200
sessions = 400
timed_statistics = TRUE
event = ""
shared_pool_size = 416M
shared_pool_reserved_size= 40M
nls_language = "american"
nls_territory = "america"
nls_sort = "binary"
nls_date_format = "DD-MON-RR"
nls_numeric_characters = ".,"
nls_comp = "binary"
nls_length_semantics = "BYTE"
memory_target = 11G
memory_max_target = 12G
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
log_archive_format = "%t_%s_%r.dbf"
log_buffer = 14278656
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
db_recovery_file_dest_size= 14726M
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = "AUTO"
undo_tablespace = "APPS_UNDOTS1"
db_block_checking = "FALSE"
session_cached_cursors = 500
utl_file_dir = "/usr/tmp"
utl_file_dir = "/usr/tmp"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
utl_file_dir = "/usr/tmp"
plsql_code_type = "INTERPRETED"
plsql_optimize_level = 2
job_queue_processes = 2
cursor_sharing = "EXACT"
parallel_min_servers = 0
parallel_max_servers = 8
core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
audit_file_dest = "/u01/oracle/admin/PROD/adump"
db_name = "PROD"
open_cursors = 600
pga_aggregate_target = 1G
workarea_size_policy = "AUTO"
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4M
diagnostic_dest = "/u01/oracle"
max_dump_file_size = "20480"
Tue Jan 15 16:16:02 2013
PMON started with pid=2, OS id=18608
Tue Jan 15 16:16:02 2013
PSP0 started with pid=3, OS id=18610
Tue Jan 15 16:16:03 2013
VKTM started with pid=4, OS id=18612 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Tue Jan 15 16:16:03 2013
GEN0 started with pid=5, OS id=18616
Tue Jan 15 16:16:03 2013
DIAG started with pid=6, OS id=18618
Tue Jan 15 16:16:03 2013
DBRM started with pid=7, OS id=18620
Tue Jan 15 16:16:03 2013
DIA0 started with pid=8, OS id=18622
Tue Jan 15 16:16:03 2013
MMAN started with pid=9, OS id=18624
Tue Jan 15 16:16:03 2013
DBW0 started with pid=10, OS id=18626
Tue Jan 15 16:16:03 2013
LGWR started with pid=11, OS id=18628
Tue Jan 15 16:16:03 2013
CKPT started with pid=12, OS id=18630
Tue Jan 15 16:16:03 2013
SMON started with pid=13, OS id=18632
Tue Jan 15 16:16:04 2013
RECO started with pid=14, OS id=18634
Tue Jan 15 16:16:04 2013
MMON started with pid=15, OS id=18636
Tue Jan 15 16:16:04 2013
MMNL started with pid=16, OS id=18638
DISM started, OS id=18640
ORACLE_BASE from environment = /u01/oracle
Tue Jan 15 16:16:08 2013
ALTER DATABASE MOUNT
ORA-12709 signalled during: ALTER DATABASE MOUNT...

ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
Please see these docs.
ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
Ora-12709 While Trying To Start The Database [ID 311035.1]
ORA-12709 when Mounting the Database [ID 160478.1]
How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
Thanks,
Hussein

Error while loading create database charecter set

Hello,
I have completed instalation Oracle 9iV2 on Redhat 7.3 without any problems.
After I reboot the system, and try to start database, I have got error mesage:
ORA-12709: error while loading create database character set
Could anyone help?
Thanks

ORA-12709 error while loading create database character set
Cause: This is an internal error.
Action: Contact Oracle Support Services.

Premiere Elements 11 crashes while loading ImporterQuickTime.pm

Hi all!
I'm facing a problem with Adobe Premiere elements 11.0 whenever I launch it (even launched directly without passing the organizer's launch screen) it stops while loading ImporterQuickTime.pm.
Here's my PC specifications:
Windows 7 32bit
Ram 2GB
Intel Dueo CPU 2.20GHZ
SIS Mirage 3 Graphics adapter
QuickTime version: 7.7.4 (latest)
Is there a troubleshooting steps or logs where I can find the culprit?
Thanks for any help.

Numerdiaweb
This type of issue does not seem unique to Premiere Elements 11, and I am not certain that this is one answer to a fix.
The person with this type of issue is usually put through the drill
http://forums.adobe.com/thread/951360
which includes
a. Is latest version of QuickTime installed? If you have the latest version, have you tried uninstalling reinstalling it?
b. Is your video card driver up to date according to the web site of the manufacturer of the card?
c. Do you have the latest Windows Updates and was all working before the Windows Updates?
I ran into this issue with Premiere Elements 11 on Window 7 64 bit. The only thing that worked everytime to get beyond this block for me was to go to the Task Manager/Processes and End Process for a Process named ElementsOrganizerSyncAgent.exe. The irony of it was that this .exe was located in the Premiere Elements 8.0/8.0.1 files on the hard drive. I have since deactivated, uninstalled, reinstalled Premiere Elements 8.0/8.0.1 and the problem has not reappeared.
With the possibility of undefinited corrupted files, you might want to look at"
a. Deleting the Adobe Premiere Elements Prefs file or the whole Folder that it exists in Windows 7 64 bit...(you may need to translate these details into 32 bit system...please ask for help if you need that...
Local Disc C
Users
Owner
AppData
Adobe
Premiere Elements
11.0
and in the 11.0 Folder is the Adobe Premiere Elements Prefs file that you delete. As I mentioned, if just the Prefs files has no impact, then try deleting that 11.0 Folder that it exists in.
Remember to have Folder Options Show Hidden Files, Folders, and Drives on so that you can see the path involved.
That 2 GB installed RAM caught my attention, but I would think that you would be able to get beyond that QuickTime message even at that. But do look into increasing that 2 GB RAM to at least 4 GB (which is the maximum supported for 32 bit system).
Let us start here and see if any of the above leads to the solution.
Thanks.
ATR
Add On...I was unaware of SG's post in your thread until after I had posted mine.

Help : error while loading create database character set

SQL> startup
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 2022600 bytes
Variable Size 180355896 bytes
Database Buffers 411041792 bytes
Redo Buffers 6365184 bytes
ORA-12709: error while loading create database character set

ORA-12709 error while loading create database character set
Cause: This is an internal error.
Action: Contact Oracle Support Services.

My Macbook Air keeps hanging on Desktop and Screen Saver of System Preference Setting indicating "loading Photos"

My MacBook Air keeps hanging on Desktop and Screen Saver of System Preference Setting indicating "Loading Photos".
Why is that ???

Welcome to the Apple Support Communities
Open Finder, select Go > Go to Folder, type ~/Library/Preferences and delete com.apple.desktop.plist

What does "Error 10" mean? "An error occurred while loading your project. 10"

Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digi

Thanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet.

Error while loading hierarchies

Dear all
I am faicng the following errors while loading hierarchies from R/3
1.Error"Error in the hierarchial structure"
When i open the logs i can see the follwing analysis,but not able to understand
Analysis
The node with the technical name 0000104 appears more than once under the node with the ID 10400011. A node must be hung only once under its direct predecessor (parent). The nodes with the same technical name have the IDs 10400017 and 10400012.
When one of the nodes is an interval, this means that the other node is contained in this interval. When both nodes are intervals, this means that both interlap.
Possible solution
Remove the Duplicate Nodes
Can anyone explain this please
2.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
I am trying to load the hierarchy for the Info object ZH_LONKLA
Can anyone kindly help me out in these
Regards
Veena.

1.Error"Error in the hierarchial structure"
the hierarchy does have duplicate values. the possibility is that you are loading a set from R/3, where the system allows to have duplicate values in different nodes, but that doesnt hold true in the case of BI. so ask ur functional folks to nake the set unique and the load should go fine.
.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
I am trying to load the hierarchy for the Info object ZH_LONKLA
Not sure whats the relation between ZH_LKSTOM and ZH_LONKLA

Error while loading WSDL File in Eclipse

Hi Experts
We are getting the following Error while Loading WSDL File in Eclipse.
IWAB0399E Error in generating Java from WSDL: WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL: Encountered unexpected element 'Policy'.:
Please advice how to resolve it.
Regards
Prashant

It seems that your WSDL is not well defined, you need to test your wsdl via WS-I compliance in order to check if the wsdl is well created, you can do this via soapui, just create a new project, import the wsdl file or set the URL, left click in the project and select check WS-I compliance, this tool will test your wsdl and gives you a detailed report of what might be the problem.

(Class cast Exception)Problem while loading data fro database in java class

Dear all,
Please help me...to solve this
I have a database having two columns of String and Date Types.
In my java code i was trying to load the data to a UI.
I am successfull in loading the String type value.
But while loading date field value,is showing Class cast Exception.
What i am doing is Getting the values from database to a String[] array.
So my question is how to
get the Date field as date field itself,Then convert it to a String..Then put it in to String[] array...
Any body please help...If any one want more clarification in question i will give......

Hi,
I am using GWT to display my data in a Grid.
So it will accept a Single two dimensional String array....Here i have one as String and other as Date.
So i was trying to get each row in a sindle dimensional array array[] then store it in a list.
Iteration goes up to 10 rows.After i am setting it in to a list
ie list.add(array);
Now while returning this list i am doing this
"return (String[][])list.toArray(new String[0][]);"
When i tried to get the date element to String array it is showing class cast exception. When i tried with toString() method it is showing the same problem.

How to know whether the javascript is disabled or not while loading the jsp

Hi,
My query is like how to know whether the javascript is disabled or not while loading the Application main JSP in Mozilla browser.
I want some Java code or JavaScript code.

To the point, just let JS fire a specific HTTP request inside the same session.
This can be done in several ways. 1) Create a hidden <img> element and set the `src` attribute so that it will request a (fake) image from the server. The server just have to intercept on this specific request. 2) Fire an ajaxical request and let the server intercept on it. You can use a Filter for this which sets a token in the session scope to inform that the client has JS enabled.

MainPage.xaml throws an error while loading designer.

Hello,
I am new to WIndows store app development.
I am creating a sample windows store App using VC++ UAP using Visual Studio 2015 CTP5.
MainPage.xaml throws an error while loading the designer:
"The element [Grid] could not be displayed because of a problem with WIndows..UI.Xaml.Control.Grid"
Exception:
NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.VisualStudio.DesignTools.WindowsXamlDesigner.WindowsStoreXamlPlatform.get_ThemeResources()
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ClrObjectInstanceBuilder.FindInstantiatedResource(IInstanceBuilderContext context, ViewNode viewNode, DocumentNode documentNode, DocumentNode keyNode)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ClrObjectInstanceBuilder.UpdatePropertyOrChildValue(IInstanceBuilderContext context, ViewNode viewNode, IProperty propertyKey, Int32 childIndex, DocumentNodeChangeAction action, DocumentNode valueNode, ViewNode& childViewNode, IInstanceBuilder& valueBuilder, Boolean& isNewInstance)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ClrObjectInstanceBuilder.UpdateProperty(IInstanceBuilderContext context, ViewNode viewNode, IProperty propertyKey, DocumentNode valueNode)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.DependencyObjectInstanceBuilderBase`1.UpdateProperty(IInstanceBuilderContext context, ViewNode viewNode, IProperty propertyKey, DocumentNode valueNode)
at Microsoft.VisualStudio.DesignTools.WindowsXamlDesigner.InstanceBuilders.FrameworkElementInstanceBuilder.UpdateProperty(IInstanceBuilderContext context, ViewNode viewNode, IProperty propertyKey, DocumentNode valueNode)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ClrObjectInstanceBuilder.InstantiateProperties(IInstanceBuilderContext context, ViewNode viewNode, DocumentCompositeNode compositeNode)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ClrObjectInstanceBuilder.Initialize(IInstanceBuilderContext context, ViewNode viewNode, Boolean isNewInstance)
at Microsoft.VisualStudio.DesignTools.Platform.InstanceBuilders.ViewNodeManager.InitializeInstance(IInstanceBuilder builder, ViewNode viewNode, Boolean isNewInstance)
The default contents of MainPage.Xaml for windows 8.1 project is :
<Page
x:Class="HelloWorld.MainPage"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:HelloWorld"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
mc:Ignorable="d">
<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
</Grid>
</Page>
The windows Phone 8.1 project loads the MainPage.xaml correctly. What is wrong with MainPage.xaml of Windows 8.1 project ?
Thanks,
Kunal

There is nothing wrong with the code.
>> using Visual Studio 2015 CTP5.
You're using a beta version of Visual Studio. Try using VS2013 instead. There's probably a bug.
It could also be a problem with your Visual Studio install. Try repairing and/or reinstalling.
Does taking out the Background property fix the issue? (i.e. just leave a completely empty grid)
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

Elements 11 Preference setting hung up while loading

Similar Messages

Maybe you are looking for