Elements 11 - Saturated Pictures

When opening a photograph in recently installed version of PSE11 they all appear oversaturated. I have checked all images in Canon DPP and Serif Photoplus 5 and they are fine.
PSE 11 was OK initially. The only changes I have made were to install a printer profile for my Canon Pixma IP4200 and calibrate my screen. However, printed images are fine.
Running in Vista.
Any ideas?

In Expert Mode go to:
Edit >> Color Settings
Make sure you don't have No Color Management selected.

Similar Messages

Just installed PS 13 elements and loaded pictures into organizer. after using PS editor now organizer is not reloading. I keep getting error message saying organizer unexpectedly quit, do you want to reopen. When I click on it to reopen it doesn't and I

just installed PS 13 elements and loaded pictures into organizer. after using PS editor now organizer is not reloading. I keep getting error message saying organizer unexpectedly quit, do you want to reopen. When I click on it to reopen it doesn't and I get the same message again. I rebooted computer, still did it, I uninstalled and reinstalled the program and I am still getting the same error message. This is on Mac OS with yosemite. Any Ideas Please!!!

Thread 8:
0   libsystem_kernel.dylib         0x00007fff9219f4de mach_msg_trap + 10
1   libsystem_kernel.dylib         0x00007fff9219e64f mach_msg + 55
2   com.apple.CoreFoundation       0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3   com.apple.CoreFoundation       0x00007fff97716ffb __CFRunLoopRun + 1371
4   com.apple.CoreFoundation       0x00007fff97716858 CFRunLoopRunSpecific + 296
5   com.apple.AppKit               0x00007fff8e85533b _NSEventThread + 137
6   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
7   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
8   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 9:: cr_scratch
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   com.adobe.CameraRaw           0x000000012122478b 0x120c28000 + 6277003
2   com.adobe.CameraRaw           0x00000001211ad48b 0x120c28000 + 5788811
3   com.adobe.CameraRaw           0x0000000120fad001 0x120c28000 + 3690497
4   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
5   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
6   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 10:
0   libsystem_kernel.dylib         0x00007fff9219f4de mach_msg_trap + 10
1   libsystem_kernel.dylib         0x00007fff9219e64f mach_msg + 55
2   com.apple.CoreFoundation       0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3   com.apple.CoreFoundation       0x00007fff97716ffb __CFRunLoopRun + 1371
4   com.apple.CoreFoundation       0x00007fff97716858 CFRunLoopRunSpecific + 296
5   com.apple.CoreFoundation       0x00007fff977ccef1 CFRunLoopRun + 97
6   com.adobe.ols.library         0x00000001235ebc86 OLSHTTPTransaction::Execute() + 4166
7   com.adobe.ols.library         0x00000001236174f9 OLSServiceTask::PerformMessageExchangeServerPOST(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&) + 1849
8   com.adobe.ols.library         0x000000012360958a OLSServiceTask::PerformMessageExchangeServer(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&) + 1834
9   com.adobe.ols.library         0x000000012361626c OLSServiceTask::ProcessUnhandledMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 1804
10 com.adobe.ols.library         0x00000001235c885c OLSClientSession::ProcessUnhandledMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 124
11 com.adobe.ols.library         0x00000001235c6921 OLSClientSession::ProcessMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 2593
12 com.adobe.ols.library         0x0000000123608d3a OLSServiceTask::ExecuteStateMessageExchangeServer() + 426
13 com.adobe.ols.library         0x00000001236010cc OLSServiceTask::ExecuteInternal() + 1196
14 com.adobe.ols.library         0x000000012361b22e OLSTask::Execute() + 350
15 com.adobe.ols.library         0x000000012361c874 OLSWorkerThreadTaskManager::ProcessTasks(OLSTaskThread*) + 1300
16 com.adobe.ols.library         0x000000012361b454 OLSTaskThread::Run() + 36
17 com.adobe.ols.library         0x000000012363fd88 OLSThread::ThreadProc(void*) + 54
18 com.apple.CoreServices.CarbonCore 0x00007fff9c7108dc PrivateMPEntryPoint + 58
19 libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
20 libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
21 libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 11:
0   libsystem_kernel.dylib         0x00007fff921a475a __sigwait + 10
1   com.adobe.ElementsOrganizer13 0x000000010dce1a84 0x10cc7e000 + 17185412
2   com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
3   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
4   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
5   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 12:: com.apple.NSURLConnectionLoader
0   libsystem_kernel.dylib         0x00007fff9219f4de mach_msg_trap + 10
1   libsystem_kernel.dylib         0x00007fff9219e64f mach_msg + 55
2   com.apple.CoreFoundation       0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3   com.apple.CoreFoundation       0x00007fff97716ffb __CFRunLoopRun + 1371
4   com.apple.CoreFoundation       0x00007fff97716858 CFRunLoopRunSpecific + 296
5   com.apple.CFNetwork           0x00007fff8fcfac80 +[NSURLConnection(Loader) _resourceLoadLoop:] + 434
6   com.apple.Foundation           0x00007fff90df190a __NSThread__main__ + 1345
7   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
8   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
9   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 13:: com.apple.CFSocket.private
0   libsystem_kernel.dylib         0x00007fff921a43fa __select + 10
1   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
2   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
3   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 14:
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   com.adobe.ElementsOrganizer13 0x000000010dce02fd 0x10cc7e000 + 17179389
2   com.adobe.ElementsOrganizer13 0x000000010cd34e19 0x10cc7e000 + 749081
3   com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
4   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
5   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
6   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 15:
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   com.adobe.ElementsOrganizer13 0x000000010dce02fd 0x10cc7e000 + 17179389
2   com.adobe.ElementsOrganizer13 0x000000010cd34e19 0x10cc7e000 + 749081
3   com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
4   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
5   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
6   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 16:: JavaScriptCore::BlockFree
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   libc++.1.dylib                 0x00007fff8fb2ad2e std::__1::condition_variable::__do_timed_wait(std::__1::unique_lock<std::__1::mutex>&, std::__1::chrono::time_point<std::__1::chrono::system_clock, std::__1::chrono::duration<long long, std::__1::ratio<1l, 1000000000l> > >) + 126
2   com.apple.JavaScriptCore       0x00007fff99593aaa JSC::BlockAllocator::waitForDuration(std::__1::chrono::duration<long long, std::__1::ratio<1l, 1000l> >) + 170
3   com.apple.JavaScriptCore       0x00007fff993828f4 JSC::BlockAllocator::blockFreeingThreadMain() + 84
4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 17:: JavaScriptCore::Marking
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   libc++.1.dylib                 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2   com.apple.JavaScriptCore       0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3   com.apple.JavaScriptCore       0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 18:: JavaScriptCore::Marking
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   libc++.1.dylib                 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2   com.apple.JavaScriptCore       0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3   com.apple.JavaScriptCore       0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 19:: JavaScriptCore::Marking
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   libc++.1.dylib                 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2   com.apple.JavaScriptCore       0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3   com.apple.JavaScriptCore       0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x00000000000000b0 rbx: 0x00006080000b4460 rcx: 0x00007fff52f7da08 rdx: 0x00007fff52f7d8c0
rdi: 0x00006080001d31a0 rsi: 0x0000000000000000 rbp: 0x00007fff52f7d860 rsp: 0x00007fff52f7d830
   r8: 0x00007fff52f7d9d8   r9: 0x00007fff52f7d9a0 r10: 0x0000000000000000 r11: 0x0000000110825b90
r12: 0x00007fff52f7d9a0 r13: 0x00007fff52f7e0e8 r14: 0x00007fff52f7d8c0 r15: 0x00006080000b4460
rip: 0x0000000110825ba6 rfl: 0x0000000000010206 cr2: 0x0000000000000000
Logical CPU:     1
Error Code:      0x00000004
Trap Number:     14

Hola! How do I move an element of one picture to another? PSE10, Windows 7.

Please let me know how to move an element of one picture to another. PSE10, Win. 7.

Jona Lewa Koola wrote:
Please let me know how to move an element of one picture to another. PSE10, Win. 7.
Select the "element" you want to "move" using any of the selection tools available in PSE and then either copy it using CTRL+C or Edit >> copy or cut it using CTRL+X or Edit >> Cut
Now go to the other image and paste it using CTRL+V or Edit >> Paste
if you cut it then it will "move" your "element" and remove from the original but if you copy and paste it then both images will have that copied item.
After pasting it, you may need to move it to the correct location on the target image.
Hope this helps.

Premiere Elements 8 - Still pictures in PE are blurred compared to original

My system is Intel Q6600 CPU, Windows 7 64bit, 6GB memory, 1TB C: drive, 2TB E:drive, NVIDIA GeForce GT 220 video card, Premiere Elements 8, using Microsoft Office Picture manager to look at still originals.
The Premiere Elements 8 project settings include editing mode = DVNTSC and Frame size = 720H x 480V.
My issue is the still picture in PE is blurry compared to the picture viewed in MS Picture Manager. The pictures are either scanned or downloaded from web pages. Here is a list of pictures with their file size and pixels count:
Scaned Pics not as good in PE as original
Cecil about 1921 - 1.5KB - 954x1440 pixels
Stephson & Nancy Shirey - 147KB - 480x720 pixels
Cecil about 1927 - 678KB - 768x870 pixels
Cecil about 1928 - 736KB - 696x948 pixels
Cecil 193X - 1MB - 1044x1608 pixels
Ceceil HS basketball team - 2.4MB - 2070x1416 pixels
Cecil 1941 at gas station - 250KB - 924x1482 pixels
Cecil Marian 1942 gas station - 336KB - 1092x1746
pixels
Web Pics not as good in PE as download
Cotton_field 1928 - 372KB - 1600x960 pixels
Cotton plant 17KB - minor degrade - 350x304 pixels
Turner School 1919 - 22KB - 450x275 pixels
Douglas Aircraft Front - 299KB - 720x587 pixels
I burned a trial DVD to see if the picture quality would be better after processing onto DVD but it was not.
What can I do to improve PE picture quality?

Use Photoshop or Photoshop Elements to scale the pictures before you import into PreElements
Photo Scaling for Video http://forums.adobe.com/thread/450798
Also, do be aware that photo dpi (dots per inch) does NOT translate to video... I don't have the exact number handy, but I think a DVD resolution video is "about" 72 dpi (BluRay is higher, but since I don't do BluRay I have not even a guess at picture resolution)

Photoshop Elements 3 trashing pictures

Hi everyone,
I have been using Photoshop elements 3 on my G4 as shown below. It works fine and does exactly what I want except when I quit Photoshop it puts up all the pictures I have processed and I have to click Do not save for each of them. Is there an easier or quicker way of doing this.
Regards from England,
Alan

Hello Barbara,
Thanks for your reply.
PE is working fine except when I have finished working on my pictures and saved the results to where I want them and then click on Quit PE because I have finished, all the original pictures appear in the Quickfix work space one at a time and I have to click Do Not Save on each one until the work space is clear and then it quits. This is annoying if I have worked on 50 pictures. Is there some way that when I have finished with each picture the original can be deleted or I can delete the lot at once at the end.
Regards from England,
Alan

How can I create this special frame/shadow in Photoshop Elements? (see picture)

Hi there, I'm completely new with Photoshop Elements and want to create a certain shadowed frame for some website pictures... can you tell me if there's a ceratin technique, plugin or other freeware (mac) which lets me act this way?
The frame/shadow should look like the picture lays on the ground, creating some clean yet lively 3D effect.
Thanks for your help!
Tobias

Now it could be at my end, because my normally rubbish connection has suck into the depths of barely usable tonight, but I am not seeing a picture, just a frame. And this is not actually the Elements forum, even if I could see the image.

Premiere Elements 10 - Moving Pictures to Time Line

Have version 10 and no manual is available yet, so a simple question im sure.
I have say 100 pictures that I want to move into my movie, making a slide show of sorts.
Is there a way to move them all and set the time (or number of frames) that each picture is shown.
So select all 100 pictures and move to time line and set the time to display each one to 1 second as example.
Is there a way to select multiple pictures on the time line and set them all to be shown for a specific time.
I know that a silgle item can be selected on the time line and manualy dragged to make it a specifice time,
but can this time be entered by entering a time/frames value? I'd like to change the time on all 100 at the same time.
My objective is to make a fast moving slide show from pictures, being able to set the on screen time for each one to
the same value, all at once, not having to select each one on the time line and manually adjust it picture by picture.
Dave

Sure is.
First, before you load the photos into Premiere Elements, go to Edit/Preferences and set the duration for each still. You must do this before you import your pictures because it only affects stills added after you make this change.
Then, before you bring your pictures in, open them in a program like Photoshop Elements and make sure they are all no larger than 1000x750 pixels. Photo Elements has a batch change feature under the File menu called Process Multiple Files.
Then use Get Media/From Files and Folders and bring your pictures into your project. If you've got them named in alpha numeric order, they'll appear in the Media panel in the right order and you can grab them all at once and drag them to the timeline. Voila!
All of this and more is in my books, by the way -- for better or worse, the ONLY manuals for Premiere Elements and the Photo Elements/Premiere Elements combo (aside from Adobe's Classroom in a Book). You can read about it and see some walk-throughs of its new features here:
http://Muvipix.com/pe10.php

Photoshop Elements 12 removed pictures from iPhoto

I installed Photoshop Elements 12 then imported photos. Now iPhoto has no pictures. I have a backup on an external drive using Time Machine, but clicking "restore" did not solve the problem. Only a boundary box appears. When I scroll quickly through the pictures, I can see them, but when I stop scrolling, only a box appears. What to do?
Thanks very much

I installed Photoshop Elements 12 then imported photos
It sounds like you had Adobe Bridge move the orignal photos out of iPhoto to its own folder system. That's not how you use PSE with iPhoto.
Once you get the iPhoto library back together, either by restoring the backup copy made just before this happended or creating a new library and importing the photos Adobe Bridge moved out you can setup PSE to work within the iPhoto Library as follows:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Screenshots are from PSE 10
Note 1: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
Note 2: editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.
OT

Photoshop elements 8 printing picture package stops working

When attempting to print a picture package, I get eratic results. Sometimes when selecting one or two photos it complete printing. I get the message that "elements has stopped working."

Hi
Being specific ... can you tell me what plateform on you are using PSE and the way you are trying to print.
Or you can do one thing easily : delete preferences of PSE and then try to use it for your purpose.
For deleting prefrences Launch PSE holding alt+shift+ctrl keys on windows or coomand+option+shift key on mac until you get the following message
Delete the settings and please lemme know if the problem exists.
Cheers,
sam

Photoshop Element 11 import picture file

While editing pictures on Photoshop Element 11, I can only import and edit one picture AT A TIME, but I CAN NOT IMPORT my entire picture file for editing, why is that.
I can drag and drop each picture to the field for editing, but NOT the ENTIRE PICTURE FILE?
Mark Moradoff

you need to stop emailing me and go back to India. We are talking apples and oranges. I don't. Need your products

Elements 9-saving picture

I just bought a Wacom that came with an photoshop elements 9,but when i save the picture that i had edited --the whole window of the photoshop elements 9 gets saved too--why is it like that? (i mean it isn't just a picture when i open the files where i saved it--it open the whole window of the photoshop.

If you saved the image in a format that is set to open in PSE, it will open PSE when you open it. Try right clicking the closed image and choosing open with... and navigating to another program if you don't want to use PSE.

Premiere Elements 13 poor picture quality

Hi Folks
I recently bought Premier Elements 13 as a Christmas present for myself. I decided I wanted a stable program that would produce good quality video, and I was prepared to pay for it.
However, my first couple of videos have been disappointing.
I have Elements installed on my Windows (7) PC.
I use MP4 video files from my camera which play well on my PC.
However once imported into PE13, the video files lose picture quality, and the final edited product looks awful. I have tried publishing as MPEG, AVI and MP4 with the same poor results.
I guess I must be doing something wrong as I thought PE13 was supposed to be good!
Any advice (in very basic language) would be gratefully received.
Thanks very much
Adrian

Adrian
Great news that you were able to produce an excellent .mp4 file with your Premiere Elements 13.
The keys to success are getting a match between the project preset and the properties of the source video (whether you do that manually or the project does it automatically).
The project will take over this task unless you intervene. Sometimes the project does it right, sometimes not...for the not, that is when you set the project preset manually.
You have to evaluate the description in the Publish+Share/ area in making your choices there. Some of the choices require customization of the preset under the Advanced Button/Video Tab/Audio Tab/Multiplexer Tab. That is because the default settings of a preset may be for a lower resolution than your source video. And, you can generate .mp4 under Publish+Share/Computer/Mobile Phones and Players as well as under Publish+Share/Computer/AVCHD.
The above is an assortment of miscellaneous information. If you decide to want to explore settings other than for .mp4, then we can discuss them in details when your
schedule permits.
Best wishes
ATR.

Elements 11--putting pictures in shapes

How do i create a shape and stick part of a picture in it? i.e. if i create a star shape (to look like and ornament) and then i want to put a few faces in the star. i sure this is elements 101, but i can't understand the manual and trial and error is getting me no where.

The easiest way is to use the cookie cutter tool, which will crop your photo to any of the elements shapes. In PSE 11 it's just below the crop tool in the toolbox:

Photoshop Elements 4 and picture resolution

I just got PSE4. Problem printing pictures bigger than 72dpi. I import a picture from iPhoto (1.4meg), do the PSE4 changes and print. The print (Epson RX700) is at 72 dpi. When I ck in PSE4, I am losing resolution on the import. I am not cropping. Doing layers though.
*where can I go for more information?
*any obvious problems in importing?
*how to I work with two file sizes? Large to print and small to work on?
Thanks,
Don

Don:
Regarding the dpi of your image make sure you're not getting confused with how the resolution is reported. As long as the pixel dimension doesn't change you haven't lost resolution. For example the photos coming out of my camera are 1600 x1200 x 300 dpi. When I open them with PS (it's the same as with PSE) the size is usually reported as 1600 x1200 x72 dpi. What is different is the size in inches. Opening and checking the size of the file before importing into iPhoto it would be 1600 x1200 x 300 dpi and the size in inches 5.33" x 4". After in and out of iPhoto the the size in inches has changed to 22.2" x 16.66". It's all smoke and mirrors. Just change inches to the size you want in PSE and the dpi will change accordingly. It's all smoke and mirrors.
As far as the color difference that's much more complex and what you're doing is on the right track. I've set PS up to manage color and set sRGB as the default color profile. Also set it for my monitor, etc. The printer is a different animal and I've not mastered it quite yet. My Epson printer is very good just as it came out of the box. My Canon printer I've never gotten it really close.

Premiere element 10 ; no picture only sound

I have a big problem. I have Premiere Element 10. It has worked without any problem for many months, but now i have a prob...
All the files are i n the project. When i try to play them i can´t see the pics anymore i only hear the sound. Also the safe frame is visible but i can´t take it away.
When i double click on some scenes there is no pics it´s only a white frame, men ljudet fungerar

Welcome to the forum.
With PrE 10, what OS version are you running?
Do you have an nVidia graphics card?
If so, please see this thread: http://forums.adobe.com/thread/1317675?tstart=60
Good luck, and please let us know a bit more.
Hunt

Elements 11 - Saturated Pictures

Similar Messages

Maybe you are looking for