Elements 12 and Revel integration

...and it does really not look good so far.
1)
Created a new Revel library and album in Elements and added some photos. Nothing happened in Revel. Waited for a long while, and suddenly Elements reported that the disk where it was supposed to download photos from Revel was missing (which was not true). Suddenly my new Revel-library and Revel-album was gone too.
2)
In "All media" view I see a lot of photos from Revel, but when I go into each of the Revel libraries and albums, they are all empty.
3) When look at metadata on a photo downloaded from Revel, I see they contains keywords/tags, but they are not detected by Elements, so I can not browse for them in the Tags browser. The keywords originates from Lightroom (which was used to publish to Revel), so I was expecting Adobe to be compatible with Adobe. Or is there a difference between tags and keywords? If so - what's the difference? Seems like tags added in Elements are saved to IPTC-keywords field as expected, but this does not go the other way. Why make a mess of this?
4) Trying to edit photos from Revel in the editor, but as Revel-albums are selected, nothing happens. Most likely because Elements is downloading photos from Revel, but who knows? No indicator of this.
5) Select a photo in "All Media" that originates from Revel and go to Information and click "Complerte". The metadata is downloaded from Revel, but my photo is no longer selected and I have to browse to find it again.
6) Went into settings for Mobile Albums and turned off Revel Agent. After restarting it, it spent 5 minutes "Uploading 1 change" or something like that. This time some photos were shown in the Revel albums, but just a few in some of them, and no indicator that most of the photos were missing.

thank you. hopefully, this will be a better way of asking...
all of my pictures are in iphoto right now. I have moved them over to be in bridge as well (I just dragged the iphoto folders...please let me know if this is the wrong way to do this).
some simple edits seem like they'd be much easier and quicker to do in iphoto (cropping, red eye) and others are obviously suited only to pse. if I make an edit in pse now, but still also have the picture in iphoto, is there a way to get that edit to apply to the photo in iphoto as well? I would assume no and that I'll have to drag the edited picture from pse to iphoto and replace the original. is that the case?
also, does the picture actually lose anything if I move back and forth like that? does it get further compressed or will it be the same size if I moved it from iphoto to pse and then move it back?
thanks again!!

Similar Messages

Sync ratings/favorites between Elements and Revel

Hi,
Is there a way to select your keepers in the Revel app on your iPad so your selection somehow gets synced into PSE?
You get the idea. I would like to select my keepers on my iPad and somehow make my selections visible in PSE.
As fare as I know, the "Favorite" flag in Revel does not get synchronized with PSE.
Thanks.

See the answer by Surendra here:
Elements and Revel: Integration is not convenient

How to remove duplicate photos with Elements and Revel?

While on vacation this year, I uploaded pictures from my camera to my iPad to Revel. When I got home, I copied all of the pictures from my camera to my harddrive on my laptop and imported them into Elements 12. On my laptop I store photos in subdirectories like this: \Lisa\albums\Pictures201509. I found duplicates of most of my photos in \Users\Owner\My Pictures\Adobe\Revel\My Catalog Old. I would like to clean these up so I only have once copy of each photo on my harddrive.
I have 3 questions:
Why did this happen?
How can I clean this up and not complete mess up my Elements and Revel catalogs?
How can I prevent this in the future?
thanks,
Lisa

The folks at www.overmacs.com/photosweeper told me that they are upgrading their product so it will work with Apple Photos. It works now with iPhoto and Aperture. It has many adjustments to detect same name files, and even same or similar content images. Monitor their website for a future release. There is a small fee for the pro version, which is well worth the price.

HELP PHOTOSHOP ELEMENTS AND REVEL HELL

1. My computer has corrupt partitions. I have to erase and reinstall everything. How do I reinstall Photoshop Elements?
2. How do I back up and save and be able to open up current Photoshop Elements photos in the newly reinstalled Photoshop Elements?
3. Revel offered way to archive but computer would not accept Media downloader from Revel to back up photos bec. computer did not recognize developer? How do I archive these photos I currently have in photoshop elements?
4. How and where do you save photos in photoshop elements? And how do I retrieve them?
5.If I purchase Elements 11 will this eliminat all of these issues I mentioned here?
6. What's the difference at Revel to "migrate" my photos from photoshop elements to Revel and/or Archive by downloading them which I can do since the developer is not recognizable on my computer?
7. Do you know if the external g: drive (time machine) backs up photohop elements photos? What will and how?

1)
To re-install PSE on a new machine or on a new disk after the disk has been formatted - wiped clean - you first need to de-activate it by going to:
Help >> Deactivate
You do this before you wipe the disk clean or before you toss away the disk and install a new one. This is to preserve your license and rights to install on two different machines if you wish to do so.
2) You must backup not only your photos but also your other documents, emails, videos, music files etc. Anything that you don't want to lose should be backed up in a flash drive (16GB flash drive or even 32 GB flash drive). You might need couple or an external hard disk that can be mounted on a USB port.
You also need to back up your PSE catalog so that this can be retrieved on your new machine or on your new disk.
For points 1 and 2, it is a good idea to make a list of things to do in advance including making sure you have all the CDs/DVDs and serial numbers ready to install applications on a new system. Planning in advance will avoid headaches later when you are working hard to prepare the new system.
For other points about Revel, you will need to post them at this link:
<http://forums.adobe.com/community/revel?view=discussions>
G/L

Integration of Premier Elements and PS Bridge

Hi, I have PS CS5 and am thinking of buying Premier Elements 10, which looks very impressive, I thought it was all presets but am realizing now that there is a lot of freedom to the setttings.. anyway. My question is this, is there any integration between the brosers in the two aps? Can I import data like keywords, etc., from Bridge into the Premier Elements browser, or visa-versa? What about with Premier 9 or CS5, or does it even have a built in browser/catalog function?
Thanks,

The Organizer and the Bridge are supposed to use similar metadata. Unfortunately, for basic things like Keyword Tags and Albums, that's usually not the case, so I'd assume they won't use each other's data.
Likewise, Premiere Elements and Premiere CS5 use very few of the same browser functions. It's usually best to choose one or the other program. You're not going to be able to move your project easily between these two very different apps.
Or when you say CS5 are you referring to Photoshop CS5? If so, yes, you can certainly create graphics in Photoshop and use them in Premiere Elements. However, they don't, for the most part, share the same catalogs and keyword tags.

Photoshop Elements and Adobe Revel

Can you use Revel with Adobe Photoshop Elements?

Gloria,
Photoshop Elements 11 has the ability to upload and download images to Revel. If you are using an earlier version of Photoshop Elements, you can still upload image from your hard drive. Please see the following link for learing how to use Revel with Elements 11
Elements organizer/Revel Help:http://helpx.adobe.com/elements-organizer/using/revel.html
Scott

No volume control elements and/or devices found

Hi, I recently installed Arch Linux and I followed the tutorials on how to configure it. At this moment I have Gnome installed and it is working fine, I only have one problem.
Every time if I try to access volume control I get the following error:
"No volume control elements and/or devices found"
I'm relatively new to Linux so it might be me just being stupid(Maybe I just don't have the right packages installed) but I've searched the web and I didn't find anything that could help, I also searched this site but there are only a few things about sound problems. I think the problem is caused because Linux is not detecting my sound card (its an on board sound card) or maybe I have not given the command to detect it/activate it. In Google I've found that 'lsmod' and 'lspci' commands are for detecting drivers, so I executed those in my terminal and put them here, I hope this might help fixing my problem.
Module Size Used by
ipv6 252608 8
nvidia 6828532 22
jfs 172540 1
ext2 57352 1
snd_seq_oss 29184 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46672 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
ppdev 7556 0
eth1394 16772 0
lp 9604 0
snd_intel8x0 28828 0
rtc 10416 0
ppp_generic 23444 0
snd_pcm_oss 39072 0
snd_mixer_oss 14464 1 snd_pcm_oss
sg 26652 0
usbhid 34592 0
hid 25088 1 usbhid
slhc 6272 1 ppp_generic
shpchp 29588 0
pci_hotplug 27976 1 shpchp
ff_memless 5256 1 usbhid
parport_pc 35940 1
tsdev 6336 0
parport 31176 3 ppdev,lp,parport_pc
i2c_sis96x 5124 0
i2c_core 17792 2 nvidia,i2c_sis96x
snd_intel8x0m 14476 0
snd_ac97_codec 91940 2 snd_intel8x0,snd_intel8x0m
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 68484 4 snd_intel8x0,snd_pcm_oss,snd_intel8x0m,snd_ac97_codec
snd_timer 18820 2 snd_seq,snd_pcm
snd 43492 10 snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_pcm_oss,snd_mixer_oss,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
pcspkr 2816 0
evdev 8192 0
ohci1394 31920 0
ieee1394 84056 2 eth1394,ohci1394
sis_agp 6404 1
agpgart 26200 2 nvidia,sis_agp
soundcore 6496 1 snd
snd_page_alloc 7816 3 snd_intel8x0,snd_intel8x0m,snd_pcm
8139too 22912 0
mii 4992 1 8139too
ext3 119688 1
jbd 55336 1 ext3
mbcache 7044 2 ext2,ext3
ehci_hcd 30092 0
sr_mod 14372 0
cdrom 34464 1 sr_mod
sd_mod 16768 5
ohci_hcd 18948 0
usbcore 115464 4 usbhid,ehci_hcd,ohci_hcd
ata_generic 5380 0
pata_sis 10508 4
libata 94100 2 ata_generic,pata_sis
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:09.0 RF controller: Advanced Micro Devices [AMD] Am 1771 MBW [Alchemy] (rev 04)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
Any help would be appreciated because this is getting very frustrating >_>
Last edited by NomenNescio (2007-04-28 10:50:10)

ryurhrt wrote:
NomenNescio wrote:
Thanks for the help, didn't get the sound to work but yet because I kinda broke my linux(wont boot)>_>
Gonna reinstall it, things usually go better the second time.
make sure u have adding the user to audio group in order to access sound device.
gpasswd -a user audio
Yes, I think that was the problem. Anyways, I reinstalled Arch Linux and everything is working fine now.

Error while XI and xMII integration (Plain HTTP as sender)

Dear Friends,
   I am doing the scenario XI and xMII integration. While sending the input file from plain HTTP adapter the result comes as follows in *sxmb_moni* :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1/>
<SAP:P2/>
<SAP:P3/>
<SAP:P4/>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: <xMII server name></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack/>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In HTTP Client Adapter for XI 3.0 it is shown as follows:
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL
</SAP:Code>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: <xMII server name> </SAP:AdditionalText></SAP:Error>
Please show the way to rectify this error.
Regards,
Jagan.

Dear Sudharshan,
   I'm doing the scenario which is in the following blog.
/people/dhanabal.thangavel/blog/2008/02/07/xi-and-xmii-integration--part-1 ==> XI and xMII Integration - Part 1
This is a synchronous one. So I set QOS as BE in Client Http Adapter for XI 3.0.
Scenario is HTTP <--> XI <--> xMII
The following errors are I found:
1) In RWB -> Message Monitoring
Status : Canceled with Errors
Message Details:
SOAP : call failed
SOAP :error occured: java.net.UnknownHostException: <HOST>
Exception caught by adapter framework: <HOST>
Delivery of the message to the application using connection AFW failed, due to: <HOST>. Setting message to status failed
The message status set to FAIL.
Returning synchronous error message to calling application: <HOST>.
2) Error coming in the Client Http Adapter for XI 3.0 as follows:
*URL:*
http://xxxxxx07:xx10/sap/xi/adapter_plain?namespace=http%3A//www.xxxxxxx.com/XIBatch3/10099/xMII_Integration&interface=xMII_Integration_Sync_Outbound&service=BS_BATCH3&party=&agency=&scheme=&QOS=BE&sap-user=xxxxx&sap-password=xxxxx&sap-client=xx1&sap-language=EN
*Result:*
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException:<HOST></SAP:AdditionalText></SAP:Error>
*Input XML file:*
<?xml version="1.0" encoding="UTF-8"?>
<ns1:XacuteRequest xmlns:ns1="http://www.lighthammer.com/Xacute">
   <ns1:LoginName/>
   <ns1:LoginPassword/>
   <ns1:InputParams>
      <ns1:ProductName>ProductA1</ns1:ProductName>
   </ns1:InputParams>
</ns1:XacuteRequest>
*WSDL file (Which is generated using the xMII transaction):*
<?xml version="1.0" encoding="UTF-8"?><definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.lighthammer.com/Xacute" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.lighthammer.com/Xacute">
    
    <types>
        <s:schema elementFormDefault="qualified" targetNamespace="http://www.lighthammer.com/Xacute">
            <s:complexType name="InputParams">
                <s:sequence id="InputSequence">
                <s:element maxOccurs="1" minOccurs="0" name="ProductName" type="s:string"/></s:sequence>
            </s:complexType>
            <s:element name="XacuteRequest">
                <s:complexType>
                    <s:sequence>
                        <s:element maxOccurs="1" minOccurs="0" name="LoginName" type="s:string"/>
                        <s:element maxOccurs="1" minOccurs="0" name="LoginPassword" type="s:string"/>
                        <s:element maxOccurs="1" minOccurs="0" name="InputParams" type="s0:InputParams"/>
                    </s:sequence>
                </s:complexType>
            </s:element>
            <s:complexType name="Rowsets">
                <s:sequence>
                    <s:element maxOccurs="1" minOccurs="0" name="FatalError" type="s:string"/>
                    <s:element maxOccurs="1" minOccurs="0" name="Messages" type="s0:Messages"/>
                    <s:element maxOccurs="1" minOccurs="0" name="Rowset" type="s0:Rowset"/>
                </s:sequence>
                <s:attribute name="StartDate" type="s:dateTime" use="required"/>
                <s:attribute name="EndDate" type="s:dateTime" use="required"/>
                <s:attribute name="DateCreated" type="s:dateTime" use="required"/>
                <s:attribute name="Version" type="s:string"/>
            </s:complexType>
            <s:complexType name="Messages">
                <s:sequence>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Message" type="s:string"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Columns">
                <s:sequence>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Column" type="s0:Column"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Column">
                <s:attribute name="Name" type="s:string" use="required"/>
                <s:attribute name="Description" type="s:string" use="required"/>
                <s:attribute name="SourceColumn" type="s:string" use="required"/>
                <s:attribute name="MinRange" type="s:double" use="required"/>
                <s:attribute name="MaxRange" type="s:double" use="required"/>
                <s:attribute name="SQLDataType" type="s:int" use="required"/>
            </s:complexType>
            <s:complexType name="Rowset">
                <s:sequence>
                    <s:element maxOccurs="1" minOccurs="1" name="Columns" type="s0:Columns"/>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Row" type="s0:Row"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Row">
                <s:sequence id="RowSequence">
                <s:element maxOccurs="1" minOccurs="1" name="Quantity" type="s:long"/><s:element maxOccurs="1" minOccurs="1" name="ProductName" type="s:string"/></s:sequence>
            </s:complexType>
            <s:element name="XacuteResponse">
                <s:complexType>
                    <s:sequence>
                        <s:element maxOccurs="1" minOccurs="0" name="Rowsets" type="s0:Rowsets"/>
                    </s:sequence>
                </s:complexType>
            </s:element>
        </s:schema>
    </types>
    
    <message name="XacuteSoapIn">
        <part element="s0:XacuteRequest" name="parameters"/>
    </message>
    <message name="XacuteSoapOut">
        <part element="s0:XacuteResponse" name="parameters"/>
    </message>
    
    <portType name="XacuteWSSoap">
        <operation name="Xacute">
            <input message="s0:XacuteSoapIn"/>
            <output message="s0:XacuteSoapOut"/>
        </operation>
    </portType>
    
    <binding name="XacuteWSSoap" type="s0:XacuteWSSoap">
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
        <operation name="Xacute">
            <soap:operation soapAction="http://www.lighthammer.com/Xacute" style="document"/>
            <input>
                <soap:body use="literal"/>
            </input>
            <output>
                <soap:body use="literal"/>
            </output>
        </operation>
    </binding>
    
    <service name="XacuteWS">
        <port binding="s0:XacuteWSSoap" name="XacuteWSSoap">
            <soap:address location="http://<XMII_SERVER_NAME>/Lighthammer/SOAPRunner/Jagan/SDN_Fetch_Product_Qty"/>
        </port>
    </service>
</definitions>
Regards,
Jagan.

Asset and PS INTEGRATION

Hi Expurts
where is the integration betwwen Asset and Project Systems please explain with examples.
Regards
Ragini

Hi,
Assets and PS will be integrated with the WBS elements,
All the Project systems are created in to WIP and moved to WBS element which is linked to cost code and settled to Final Assets.
Project will be created as WBS elements and PS is also used for opex POs.
Regards,
Padma

Status gui, text elements and screens in Abap in Eclipse

Hello everybody,
Today i start using AiE, but i see that i can't create status gui, text elements and screens, the only method to achieve this is open sap gui (from eclipse) and create this directly there. I don't know if i am doing something wrong but i can't see how to create this objects in eclipse.
Is SAP working to implement this options directly in Eclipse without having to go to sap gui?, if that's right, when are we going to see this options directly in eclipse?.
In advance thank you very much.
Best regards.
Jhon Jairo Teran.

Hi Jhon Jairo Teran,
you are right, some development objects are currently only supported in AiE using the SAP GUI integration. However, with each release more and more features become available. For example, editing message classes was added in a recent release. The best way to keep up-to-date with the features of AiE is to follow the AiE space on SDN (ABAP in Eclipse).
On thing to keep in mind is, that the availability of some features depends on the version of the backend system. Thomas Fiedler created a blog that contains the information which features are available with which backend version: ADT Feature Availability Matrix for AS ABAP Releases.
Christian

Lightroom upload to Adobe Revel no longer supported?!? Future of Lightroom and Revel?!?

Hi,
currently I'm Pro-User of Adobe Revel and I upload all photos with Adobe Lightroom 4 to my Revel account.
I googled a little bit around because I'm not able to upload videos via Lightroom and i found this link:
https://forums.adobe.com/thread/1162795.
On this page it is said that Adobe will not continue plugin support for Lightroom and Revel.
Could somebody (or anybody - sorry for my english) tell me more about the future of Adobe Lightroom and Adobe Revel?!? Would be great and helpful....
Thanks in advance
Stephan

Stephan hi
yes, there is no way to use the revel plugin from LR anymore.
i am also finding this very strange as both are adobe products & no integration anymore?
i use LR as a database for all my images
and was exporting to revel, only the ones that i need to share
this is very frustrating and unexpected from adobe
maybe they will come up with a new revel plugin
but no official word from adobe yet
i have been exploring various options for sharing like smugmug, flickr etc
but have more faith in adobe, as i have been a LR and photoshop user for many years
just started using revel on free trial account, certainly wont take their PRO service without the LR/REVEL integration
i also feel that revel has been around for couple+ of years
but they lack many basic features, compared to others like smugmug
i understand a new service/app takes time to develop, but by now, they should have nailed it
for eg: if i webshare an album with a friend, he can download the individual 50 pictures one by one
there is no option to download the entire album in one go, very frustrating and very basic feature
seems like this is a hobby project for adobe and they aint investing much into this service
though their annual subscription charges are at par with others like smugmug and probably more than some others
the revel forum is also not very active from adobe's side
they should realise that people like you & me, and many others explore first and then finalise a service for good and stick to it
what if i go towards smugmug and upload all, i wont be changing back to revel, as its a lot of hassel organizing and re-uploading again
if anyone listening/monitoring these threads on adobe forum
please reply

Photoshop/Elements to Revel Photo Migration Problem!

What happened to my Photoshop/element photos? They were supposedly migrated, but I don't see them! I have no albums in my Revel account.I had a paid subscriiption and it was cancelled back in or around February, and told that the photos would be moved over to REVEL...Can anyone help me to get them back?

First, thanks Pattie for following up with me. I am going to check my backed up hard drives to see if my photoshop materials are on them. It will take me a few days, as I have only small amounts of time to research it at this time. maybe a break will come in a day or two for a determination.
Date: Mon, 12 Aug 2013 09:45:52 -0700
From: [email protected]
To: [email protected]
Subject: Photoshop/Elements to Revel Photo Migration Problem!
    Re: Photoshop/Elements to Revel Photo Migration Problem!
    created by Pattie F in Photoshop.com Sharing and Storage - View the full discussion
Michael-
Is it possible you logged into Photoshop.com with a different email, or is it possible that you did not set up your Elements to sync with Photosho.com? These are the two main reasons users can not find their files.
The Photoshop.com account created in 2009 with the email you use to log in to this forum has no files in it, and therefore, nothing migrated to the Revel account with the same login. You do have a Revel account with the same login, but it is also empty since nothing migrated.
Pattie
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5587690#5587690
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5587690#5587690
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5587690#5587690. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop.com Sharing and Storage by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Will I be able to up load video slide shows from Elements to Revel?

Please let me know if I will be able to up load video slide shows from Elements to Revel? I currently enjoy photoshop.com because I can share photo albums and video slide shows from Elements with my family. I am worried because I don't see any home page or tool bar on my new Revel account. It's like there's nothing there?? Am I missing something?
Help !!! Robert [edited out phone number to protect user's privacy] USA Please call me, I can't find any phone number for me to call for customer service.
Thanks !

Currently, Revel supports jpg files only. We are adding many enhancements so this may change in the future. Reading some of our FAQ's might be helpful for you to get some more information, so I will include some here for you. Only version 11 of elements has connectivity with Revel, but you can upload files from your computer as well.
Pattie
forums.adobe.com/community/ps.com_sharing_and_storage
forums.adobe.com/community/ps.com_sharing_and_storage/faq
forums.adobe.com/community/revel
http://www.photoshop.com/misc/membership-faq
http://www.adobe.com/products/revel/faq.html
http://helpx.adobe.com/elements-organizer/using/revel.html

Sharing files between Adobe Premiere Elements and Adobe Photoshop Elements

This question was posted in response to the following article: http://help.adobe.com/en_US/premiereelements/using/WS72D069B5-1663-44a9-BB4E-8182DB2EE6C6. html

msnexplorer
I suspect that this latest set of details is clouding the way to success.
Typically we would be looking at integrated Photoshop Elements and Premiere Elements set. I thought that we were working with Photoshop Elements 8 and Premiere Elements 8.0/8.0.1 which would considered an integrated set.
Let approach this from a different angle.
Have you any idea what version of Premiere Elements your project.prel came from? Reflecting back, the concept of integrated combos of Photoshop Elements and Premiere Elements did not appear until the combo of Photoshop Elements 5 and Premiere Elements 3.0/3.0.2. Along with that came the perk of the Premiere Elements' Break Apart Elements Organizer Slideshow to do just that for the slideshow that it received from the Photoshop Elements side.
Unless you have additional details that would support us getting to the goal, I think that the path of least resistance might be:
a. if you can open the project.prel in question in Premiere Elements 10, then do so.
b. After you have the slideshow on the Timeline, then use the Split Clip (Scissors Tool) to cut the slideshow at the spots where you want to insert additional pictures. You may have to add back transitions and such.
The Break Apart Elements Organizer Slideshow would have been perfect for you to make your edits of the slideshow in Premiere Elements. But that command is only available in Premiere Elements under certain condition:
a. You must be dealing with integrated combos of the programs, example, 5/3, 6/4, 7/7, 8/8, 9/9, 10/10, 11/11. There are a few loopholes in all that but I do not see them helping us at this time.
b. You would have had to Output the Photoshop Elements to Premiere Elements with the Photoshop Elements Slideshow Editor "Send to Premiere Elements or Edit with Premiere Elements Editor".
Bottom line: if your task is going to involve more than the version 8 combo, then I think it best to try to open the project.prel that you have and break it apart yourself with the Split Clip Tool of Premiere Elements.
And, did you say if this project.prel does open in Premiere Elements 10 without any missing media (Media Offline) messages?
We will be watching for further information and developments. Please let me know if I have misinterpreted any of your information.
Thanks.
ATR

Oracle Portal and Discoverer Integration

Portal Version: 9.0.2.0.1
RDBMS Versjion: 9.0.1.3
OS/Vers. Where Portal is Installed:: Suse 7 SLES
Error Number(s)::
Oracle Portal and Discoverer Integration
We're trying to integrate Discoverer with Portal unsuccessfully.
We made many things in accordance with oracle's documentation until add discoverer portlets (worksheet and list of workbooks) in a test page.
In view mode, the worksheet portlet shows the error:
"The portlet has not been defined. The publisher must define the portlet by clicking on Edit Defaults for the portlet on the edit mode of this page. Please contact the publisher of this page."
We think we have to edit properties before. Is this? Anyway edit worksheet portlet crashes between step 1 and 2. The error is: "The listener returned the following Message: 500 Internal Server Error".
We have a public conection created in EM and a discoverer application which can be viewed using plus or viewer.
Furthermore, it's not possible delete the added portlets neither the page that contain it. The error at delete is:
Error: An unexpected error occurred: User-Defined Exception (WWC-44082)
(WWC-00000)
An unexpected error has occurred in portlet instances: User-Defined Exception (WWC-
44846)
An unexpected error occurred: User-Defined Exception (WWC-43000)
The following error occurred during the call to Web provider:
oracle.portal.provider.v2.PortletNotFoundException
at oracle.portal.utils.v2.ContainerException.fillInStackTrace(Unknown Source)
at java.lang.Throwable.<init>(Throwable.java:78)
at java.lang.Exception.<init>(Exception.java:29)
at oracle.portal.utils.v2.ContainerException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletNotFoundException.<init>(Unknown Source)
at oracle.disco.portlet.provider.DiscoPortletPersonalizationMgr.destroy
(DiscoPortletPersonalizationMgr.java:65)
at oracle.portal.provider.v2.DefaultPortletInstance.deregister(Unknown Source)
at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.deregisterPortlet
(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.doMethodCall(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter
(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke
(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal
(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest
(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
(WWC-43147)
Edit properties for portlet List of Workbook works but in view mode we have the error in the portlet area:
"Failed to refresh portlet. Please verify that the information used to create the
portlet instance or customization is still valid. Otherwise, please contact your
iAS administrator. oracle.discoiv.controller.FatalControllerException:
DiscoNetworkException - Nested exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor
code: 0 completed: No null"
Any ideas?
Thanks

Hi there,
Have you applied any patches to 9ias since it was first installed? We had the same problem and had to apply a couple of patches to get the portlets working.
1. Apply the 9.0.2.53.16 one-off patch for Oracle 9iAS Discoverer which takes Discoverer up to 9.0.2.53.16. This patch appears to be password protected and you need to get someone at Oracle support to give you a password.
2. Apply the Discoverer Portlet Provider: 9.0.2.53.00c patch (patch no. 2595444) which gives you a new discportal.xsl file that actually works. It's this second step that solves your problem but you need to do step 1 before this. This is password protected as well.
3. As you've upgraded Disco on the server to 9.0.2.53, you'll need to upgrade Disco Admin & Desktop within your 9iDS installation using patch no. 2555265. This is because Disco 9.0.2.53 uses an upgraded EUL that Disco Admin & Desktop need to be patched to use.
This was the course of action Oracle support advised us about nine months ago. Of course they may have released a further patch to Disco that does 1 & 2 in one go, but we regularly carry out steps 1 and 2 on servers we use and we can use the Disco portlets successfully.
Hope this helps
Mark Rittman
[email protected]

Elements 12 and Revel integration

Similar Messages

Maybe you are looking for