Elements 12 organizer error bec. Mac osx is 10.6.8 latest version available from MAC
Process: Adobe Elements 12 Organizer [17765]
Path: /Applications/Adobe Elements 12 Organizer.app/Contents/MacOS/Adobe Elements 12 Organizer
Identifier: com.adobe.ElementsOrganizer12
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [104]
Date/Time: 2013-11-04 20:25:50.660 -0500
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Error message noted above. I just bought Elements version 12. Organizer will not open, but Elements 12 works. How do I get this fixed?
How do I get this fixed?
Unlikely that you will. You're running PSE12 on an unsupported operating system.
Elements 12 requires OS X 10.7 or higher.
http://www.adobe.com/products/photoshop-elements/tech-specs.html
Similar Messages
-
How do I go from Mac OSX 10.5.8 to Latest version of Mountain Lion. I hava an iMac desktop
What do I need to do to update my computer from this version to the latest one of Mountain Lion?
Thanks for the supportUpgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion contact Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion. -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
My new Mac Air states that my " Mac OSX startup disk has no more space available for application memory" and wants to force quit Safari. I have only added MS Office to the computer and Carbonite. Any suggestions?
Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the Finder and open the Info window. What value is shown for Available (space)?
-
I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.
Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac, so I hope somebody can give me some advice.
Cheersif it's ntfs microsofts filesystem then you need a windows machine to recover them
-
What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!
Minimally you need Snow Leopard or greater:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I run OSX 10.6.8. Latest version of Safari has been downloaded in error. What is the best metod of retrieving Safari with all bookmarks etc intact?
Thank you very much indeed.
-
IMac Memory Issues: "Your Mac OSX Startup Disk Has No More Space Available"
Hi all,
I've done some extensive searching on my issue, and haven't been able to find a solid solution. I was hoping that if I shared my specific problem, it might shed some light on what is going on. My OS is current: 10.8.2 with plenty of HD space (over 250 GB) and 4 GB ram.
Over the past couple of days, my iMac has become very slow and laggy. Most times I will eventually get the message: "Your Mac OSX Startup Disk Has No More Space Available". This is after it has been lagging for quite a while, sometimes several hours.
I will restart, things will be sufficiently fast for a few minutes, but once I start working in any application (including any browser, or adobe software) it starts to slow down until it is eventually to a crawl, with the spinny wheel showing up often, even when only one application is open at a time. It doesn't take more than several minutes to start slowing down. Even simple things like hovering over the dock start to really lag, or opening my applications folder or System Preferences can take upwards of 15-30 seconds, even several minutes sometimes.
Here's some steps I've taken so far:
- Checked the activity monitor and system memory seems fine. No single app takes up more than 7% or so of memory at any given time. 1.65 GB active, 1.64 GB inactive, about 700 MB wired, free about 4 MB. VM size is 247 GB, CPU also seems OK: (%user around 10-20%, %System around 10%, Idle around 70-80%). No single app seems to be taking up an excessive amount of Real Memory.
- Permissions repair (It found some things to fix, but never completely finished, seemed to freeze after several hours, tried it several times)
- Checked disk for repair (no problems found), did the S.M.A.R.T check and ran tests again using Onyx.
- Re-indexed Macintosh HD
- I saw a suggestion to reset the PRAM, so I did that.
I do have the system backed up via Time Machine. Suggestions for further action are very much appreciated!Ok, thanks. Here's a screenshot from during when it was running to a near halt (took me a while even to take the screenshot):
Here's a second screenshot after restart. All I did was open Chrome to post this:
At this exact moment I have about 500MB of memory free, but I have been watching it slowly count down starting from 2GB free when I first restarted. So far it is running smoothly, but I am guessing that it will start to lag again once the free memory dials down.
In case there is any correlation: I happened to have a strange issue with my internet connection. My router seems to be working fine, and I have wi-fi connected around the house. However, I did have my iMac connected via ethernet cable, and the wired connection was not working (was not finding a DNS address), but when I go to Wi-fi, it works. Again, could be totally unrelated, but it started just before the slowdown. -
Hi everyone,
I'm running a late-2012 27 inch iMac - 3.4GHz Intel Core i7, 32GB 1600 MHz DDR3 with the 3TB fusion drive, OS 10.8.4. At present there is 1.92TB of available storage.
I have received this message "Your Mac OSX startup disk has no more space available for application memory" just before a full on crash multiple times in the past couple of days whilst using WeTransfer to send over some large files (500MB+). The applications I have had open at the time have been: Activity Monitor, App Store, Firefox, and Finder. Over the course of uploading the files, the active system memory has gone from 1.04GB and steadily increased until it more or less maxes out around 29GB, at which point the Page Outs rocket up to around 40GB/s and the swap memory fills up pretty quickly until the computer basically can't take any more and blacks out.
This is a pretty new thing, haven't really had an issues before. My main software used: Sibelius 7 & Logic Pro X. I've also recently started working with Final Cut Pro X, which seems to have been struggling at points. I've tried closing everything, restarting the computer and not opening anything (specifically NOT FCPX) before attempting an upload. I've even gone so far as to remove FCPX from my system, and yet the problem is still recurring. Both "kernal_task" and "WindowServer" have been running high on CPU when these problems have occurred.
Does anyone know what might be the issue and how it could possibly be resolved?
Really appreciate any help, I'm in the middle of a fairly sizeable project and the deadlines are just around the corner.
Thanks,
TomThere is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
Can i install mac osx back again after installing windows 7 on my mac book a1181?
i have apple mac book a1181 white, but i had problem logging on as it was secured by a password, and i allready lost my recovery dvd, so i installed windows 7 on my mac book a1181 by deleting its partition from GTP to NTFS but i experienced problems after installing windows 7 as sound was not comming as i could not find sound drivers for macintosh, so now i plan again to restore my apple macbook a1181 back by reinstalling mac osx 10.5.8, how can i again install mac osx on my notebook and is it possible to re-install mac on my notebook? please give me some help.
Insert your OS X install disc and restart holding the C key, hold it down until you see the Apple logo and spinning gear. Choose your language and at the next screen from the top menu bar select Utilities-Disk Utility. Select your internal hard drive, click on the Partition tab and select 1 partition. Click on the Options button and select GUID partition scheme. Click OK. Choose to format the drive as Mac OS Extended Journaled. When Disk Utility is done and your drive is properly partitioned and formatted quit DU and go back to the installer screen and reinstall OS X. When you're up and running run software update a couple times to get everything up to date as far as you can with 10.5.8. Then consider upgrading to OS X 10.6.8 Snow Leopard for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
-
This started for me 1/17/2011 on the savingsbank.com website:
Firefox (latest versions) on both Mac 10.6 and Windows 7 show "this Connection is Untrusted" on my bank site https://www.savingsbank.com
NO other browsers - Explorer, Chrome, Safari - give this error box on this site. Please advise if this has to do with the bank site? or Firefox compatibility.
Saw in a forum someone else having this problem and they were told it had to do with their Date and time being off?? I've been on several computers, all with the correct date and time and they've all shown this Insecure Certificate statement on my bank site with Firefox and no other browser.I've looked at the banking site with IE8 and it does NOT show me that "This connection is Untrusted" window. (please see attached screen shot of viewing the site with IE8) It opens fine and has "Identified by Network Solutions" showing on the address bar as it always does.
The latest version of Opera (not earlier ones) does show a problem with the website's security certificate.
We've contacted the bank about this, and they say there's no problem with their certificate but are looking into it.
My question remains, why only Firefox and one version of Opera claim this and NO other browser? -
I have always been able to create playlists on itunes, then drag them to my ipod when it is plugged into the mac. I recently downloaded the latest version of itunes, and now am unable to do that. I can drag songs and albums to the ipod, but not my playlists. It used to be so easy, am I missing something here?
Plug your iPod into your computer, it will begin to sync. Now check to see if the playlists have been added.
If not, go to the songs tab under your iPod when it is connected to iTunes, Unless you have checked "Sync all songs (or something to those words)" you should have an option on what you can put on your iPod. Make sure to check the playlists that you want on your iPod. -
Hi,
I have lost all data on my iphone by mistake. I needed to restore the phone and I didnt realize my back-up was 1yr old, and now the phone is restored and I've got a year old contact list and iMessage chat history. Luckily my iMessage on the Mac is still valid and has all the chat history. My question is how can I restore iMessage chats on my iPhone 4 from my Mac? I have all the chat history on my Mac, but there seems to be no sync function from Mac to iphone. Please advice.If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
http://support.apple.com/kb/ht1766
Don't worry! Everything should be back to normal if you follow these steps. -
We have several licences of Adobe Photoshop Elements V9 can we use the same licence key for latest version or what version can we install is this key???
We are Gouvernment and we use Windows 7 64 bits edition with office 2010.
Thanks.Hi Denis, if you have license of Photosho Elements V9 then you can only install V9, please check the download link: Download Photoshop Elements products | 9, 8, 7. Please also check System requirements | Adobe Photoshop Elements
Atul_Saini -
my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?
Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.
Maybe you are looking for
-
I am writing an application that responds to a mouse click in a JLabel. This Icon has to move as the window resizes (as default in GridLayout). Despite this I need to be able to translate clicking on the top corner of the ImageIcon to clicking on (0,
-
Data Modeler How to display the "relationship name" vertically
Is there any way to display the relationship name vertically. In Designer, it used to be like that.
-
Server Cannot Be Contacted on Port 143
I am trying to send a message from Mail on the same computer as the OS X Server. How can it not contact itself? The message I get is: "Unable to Connect - There may be a problem with the mail server or network. Check the settings for the account 'wbe
-
Where is the CoverFlow in the ios7?
I have already known that in iOS6
-
Have a look an tell me what went wrong
Ok so im creating a website and im basically using this for a CSS style for the background image: <style type="text/css"> <!-- body { background-image:url(images/background.jpg); background-attachment: fixed; background-color: #fff000; background-rep