Elements 12 print color dark, dull.  Epson R3000 Mac OS

Wise Adobe Community folks I need your advice.  Mac. running Yosemite, Version 10.10.1,  Elements 12.  Prints from Epson R3000 dark, dull.  Formerly this printer/Elements combination worked fine before Yosemite upgrade.  Monitor calibrated and (formerly) was accurate representation of print.  Printer heads, ink checked OK.  Paper Epson Premium Glossy.
Color handling: Photoshop Elements
Image space: untagged RGB
Printer profile: SRGB IEC61966-2.1
Color settings: 'No color management.'  Also tried 'Always optimize for printing.'
Also tried purchase and download of Elements 13 but problem persisted and conflicts with Organizer appeared so I removed Eleemnts 13 and now back to 12. 
Tried many combinations but I'm lost.
Your wisdom much appreciated!

Here are a couple of links. No idea when some of them were last updated so your mileage may vary:
Colour management problems with Epson R2400
Epson Stylus Photo R2400, News & Alerts - Technical Support - Epson America, Inc.

Similar Messages

  • Print size problems with Epson R3000 and Mountain Lion

    I am using Mountain Lion on a 2008 MBP and an Epson R3000 printer.  I can not get prints to size to my paper.  In aperture I am choosing custom since there is no option for 11.7X16.5.  I have set the print size to the same and still it does not work.  I tried both landscape and portrait but that did not work. 

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • Why will PE 11 not print with brand new Epson R3000?

    Brand new Epson R3000 printer and works fine except with PE 11. Epson spent an hour trying new drivers and setting to no avail.
    Is it the PE version? (worked fine with Epson R2880 one week ago)

    It should work. You might try uninstalling and reinstalling PSE. Sometimes that helps it to pick up a new printer. Use control panel or the uninstaller in the PSE folder in applications. This shouldn't affect your catalogs and photos, since those files are separate from the program files.

  • Lightroom prints too dark on Epson 7600 after 10.6 update

    I've been reading / trying to troubleshoot this all day.
    I've completely wiped and re-installed the printer drivers, Lightroom and the profiles.
    I've tested printing with CS3 which works just fine, so it's likely not the Epson driver.
    When I preview in Lightroom it looks correct, so does Print Preview. However the image coming out of the printer appears much darker with a noticeable color shift. Darks are way darker, light yellows with a hint of red become light yellow with a hint of grey.
    I've tried 2.3 and 2.4.
    If printing from CS3 works fine, that points to Lightroom as the culprit.
    Anyone else having similar issues?

    Because the printer still works after upgrading to Snow Leopard. As noted by the output being the same as 10.5 in all applications except Lightroom.
    I appreciate the help. But that doesn't stop all signs pointing to Lightroom. Especially when most of the Epson / LR issues are 2-3 years old and I was never afflicted with.
    The breakdown:
    In 10.5 Lightroom, CS3, etc all printed fine. All results were the same.
    In 10.6 CS3, etc still print fine, exactly the same they did in 10.5. There are no issues with the drivers, no hanging, no freezing, nothing bad coming out the printer. Everything coming out of CS3 looks the way it's supposed to and has been setup.
    In 10.6 Lightroom all of the sudden does not print normally anymore. In 2.3 nor 2.4 (both released before 10.6).
    I fail to see how that doesn't point all fingers at Lightroom. Perhaps they will release 2.5 and all will be well in the world.
    I've come to the Adobe board to try and figure out the problem I'm having with this particular Adobe product as troubleshooting has led me here.
    I'm perplexed as to how this is even an issue if LR and CS3 are supposed to use the same print routines. They should print exactly the same. If one is messed up the other should be too.

  • Photoshop CC printing is dark on Epson 2880

    I just upgraded to PS CC, and when I print the image is dark. I use an Epson 2880. I have called Epson customer service; not resolved. I have the PS CC print settings as "Photoshop manages colour". Does anyone have a suggestion?

    Epson is having a lot of problems with their printer drivers on MacOS 10.9.
    Check with Epson for updated drivers.

  • Why do my applications quit when I enter the printer setting for my Epson 10600

    why do my applications quit when I enter the printer setting for my Epson 10600

    Which Mac and OS do you have?

  • Epson prints too dark from LR on color managed MacBook Pro?

    Hi all,
    I have a newish MacBook Pro, calibrated with Spyder2, and printing to an Epson 2200. The prints are too dark, and don't really come close to matching the screen in LR. I've brought the images into PS2 for soft proofing, but the prints are still far too dark. It's not just out of LR, but DPP as well. I found this topic:
    http://www.adobeforums.com/cgi-bin/webx/.3bc44027/28
    Tthat seems to describe my problem, but it seems to be Adobe-specific. Doug doesn't say if he's tried printing from other apps. I use Epson's custom profiles, which actually seem to be worse than the standard profiles that come with the driver.
    A new twist seems to be that profiled jpg images with sRGB profiles exported from LR also print too dark when I had them sent out for printing, which leads me to think that my screen is not profiled correctly, or there's some weird flaw in the Mac's color management engine that skews everything.
    My first question: When I profile my screen using Spyder2, I have the brightness set at maximum. Should I bring it down, and if so, how far? The Spyder2 help says use "Factory Defaults", but the MBP ships with brightness set on auto-adjust based on ambient light levels.
    My second question: Are there others who have this issue? Have any of you resolved them successfully, and if so, how?
    Thanks!
    Timmy

    Time for a reality/sanity check for those who complain that "the "prints are too dark from my Epson printer"!
    If you will just reduce your monitor's white-point luminance to the range of 80-90 cd/m2 when you edit your images, it's almost certain that the problem will be solved (assuming you're not making some other error in color management setup). Many people conclude that their problem must be a generic failure or defect of Epson printers (i.e., compared to HP, etc)-- or that the Epson paper profiles are defective. Well, perhaps there's some element of truth to that conclusion--to the extent that Epson printers have evidently been designed with typical professional editing environments in mind (i.e., the low brightness levels to which "serious" printers adjust their monitors and ambient lighting). Why would they do that: Well, who wants to spend many hours each day looking at the glare of a 200 cd/m2 monitor screen (and the reflections from a brighly lighted room)?
    So, for getting "monitor-matching" prints from printers such as the SP 2200, you simply need to work (edit) with your images in a more-or-less "dimly lit" room using a monitor that is properly adjusted for such a low-light environment--(i.e., the screen luminance not higher than 90-100 cd/m2). Of course even with such a reduced screen luminance, the light used for print-viewing must be sufficiently bright(**)
    It's possible that your monitor cannot be adjusted to the necessary (low) luminance level--or that you haven't any means to measure the luminance level. Those are correctable hardware issues, although may require $$.
    (**)please note that a fairly bright viewing light is needed for prints (made as suggested above) to appear to be a reasonably close "match" to the monitor image.
    Phil

  • Color Management for Epson printer using Photoshop Elements 6

    I have consistently dark prints when using my new Epson workhorse 1100. It prints fine from iPhoto but not from Photoshop Elements 6. The Epson people say it's an Adobe problem. The Adobe people won't help, as it's not under warranty. I am interested in settings in PSE6 or on my Mac OSX. Or, what's a profile and how do I set it? Thanks!!

    Yes, I've tried all of the options: Printer manages color, PSE manages color. All are the same dark prints.
    On another conversation on this forum, I read the following. Very discouraging to think that Adobe knows of this problem but won't give me any tech support because too much time has lapsed.
    I don't know what "plugs" are--sounds like this user figured out a way around it.
    Any advice?
    Thanks!
    Fran
    Re: Color mismatch EpsonR800 and Elements 6
    Adobe has admitted that there is a color management issue with PSE 6 for Mac. I have an Epson R1900 and I am now getting acceptable color-managed prints by allowing the Epson Printer driver to manage color management (ie; color management in PSE 6 turned off). The Epson Photoshop Plug In also works well with PSE6 and ICC profiles; however, I have yet to solve 2 problems with this particular plug in: (1) How to get the program to capture 3rd party ICC profiles and (2) how to print borderless prints. If anyone has seen a user guide for this particular plug in, I would be grateful to know how to download it.

  • Lightroom printing problem Epson R1800, XP SP2, colors dark

    I'm having no success with printing from Lightroom 1.3.1, with a quite new Epson R1800, on an IBM R51 with Windows XP SP2.
    Printing is fine, using Epson's Easy Photo Print, and PhotoShop Elements 2.0. In fact, the results with Epson's Easy Photo Print and Elements 2.0 are almost identical.
    I played with ICM on, off, downloaded new Epson icc profiles for glossy paper, loaded new cartridges, cleaned nozzles, etc.
    And I searched this users forum and the general web. Sounds like printing problems with Lightroom is pretty normal.
    Any other clues or hints to solve the problem? Seems pretty stupid that Lightroom can't be used to print.
    ...Vick

    Vick,
    I'm new to printing on my Epson 1800 and am sure others know more than I do, but this might be a start since I had the same problem printing from Photoshop CS3 on a R1800 and R200. I think the problem is in the printer properties/printer dialog setup and since the problem is the same maybe the solution is also the same.
    In Lightroom click File - Print Settings or, to get to the same place, click File - Print and click the Page Setup or Print Settings or Print button. Whichever, it takes you to the print setup for the 1800. Click Properties which takes you to the Epson Stylus Photo 1800 Properties window. In the bottom right, click Advanced button. A "note" warning about making changes pops up. Click continue. Under the Main tab, color management make sure ICM is NOT selected. I have "Color Controls" selected. Click OK (twice I think) to get back to the Lightroom print window. This corrected the dark colors problem I was having. When printing in PS3 it asks, "Did you enable color management in the printer dialog?" Somewhere else I found the suggestion to disable ICM color management when printing from PS3. So much to know!! Hope this helps.
    Allen Round

  • Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

    Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

    In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

  • Elements 10, windows 8, 64 bit, epson artisan 835 printer: prints are really dark even after using enhancements like adjusting lighting. Prints are darker than photoshop edit screen. Prints are acceptable using paint, windows photo viewer, or gallery.

    Elements 10, Windows 8, 64 bit, Epson Artisan 835 printer: Prints are really dark even after applying enhancements, like adjusting lighting. Prints are darker than Photoshop Edit Screen. Prints are acceptable using Paint, Windows Photoviewer, or Photo Gallery.

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • Accurate color print workflow IDCS6 to Epson R2400 w/X-Rite Custom Profiles - Mac OS X 10.8.1?

    Hello Folks,
    I am trying to get accurate color out of InDesign CS6 on an Epson R2400 using custom created profiles with X-Rite i1 Profiler in Mac OS X 10.8.1. on Epson Papers. Has anyone had luck with this workflow? I am also looking for the same with the Epson R3000.
    I have been scouring the web for more than a week for updated info and some insight but have been having a hard time finding solid step by step settings I can follow and get accurate output. I end up with either too light/washed out prints or too dark and saturated prints. I've already blown a complete set of inks and tons of paper and time toiling with this one.
    I'm looking first for how to verify that Colorsync settings are accurate for my needs, updated color settings in InDesign CS 6 and Epson printer driver settings with Epson inks, Epson papers and their downloadable profiles at least. If I can get that to be semi close I can then attempt to use recently created custom profiles for individual papers to really nail my output.
    I have used the most recent X-Rite i1 Profiler (1.3.1)/Gretag MacBeth i1 Proof UV-Cut spectrophotometer with new and older iMacs, Mac Pros with Cinema displays, the new Retina Macbook Pro's and CS6, 10.8.1, Xerox 7760 and Xerox 8570 and have accurate color. I have calibrated the monitors/screens, the Xerox printers with different papers and no problems with output.
    For some reason the Epson workflow is being a complete tool. I have completely removed the Epson printer folder etc. as per Epson's uninstall information and downloaded and reinstalled to to present. Any help would be extremely appreciated. My wallet and sanity thank you!

    Here are a couple of links. No idea when some of them were last updated so your mileage may vary:
    Colour management problems with Epson R2400
    Epson Stylus Photo R2400, News & Alerts - Technical Support - Epson America, Inc.

  • Print Color Management Problem w. Photoshop Elements and Tiger/Leopard

    Has anyone tried printing with ICC profiles through Photoshop Elements 6 for Mac? Apparently, it does not work on Tiger nor Leopard? My prints look very dark and over-saturated.
    The Datacolor folks, who make the Spyder3 calibrators I'm using, say my prints look like they are being "double color managed," possibly once by PSE and once by the printer driver (even though it's turned off).
    Over at the Adobe Forums some say it's a problem with Leopard. I'm not so sure, because I found that printing color management works fine on a Mac with Photoshop Elements 4.01 and Tiger. Any comments? Thanks.

    Aha! Got it. Adobe has confirmed that the problem is on their end. PSE 6 is double color managing the images. Here's what one user got in reply from Adobe on the subject. There are two separate answers:
    Thank you for contacting Adobe Technical Support.
    After consulting with my colleagues about the issue you raised, I can let you know the following:
    The issue is both on our as well as the driver software side and the workaround we have given is the best available at this time. This issue is affecting all printers, not just Epson or Canon.
    The soft proofing effect that you are seeing in the print preview is indeed an attempt at soft proofing. However since Photoshop Elements managed prints are incorrectly double colour managed it is not as useful as it was initially designed.
    As to the exact details of why this occurred, we have no official information.
    We believe that this will resolve the issues you are experiencing, however, should the reply not help solve the problem, please contact us again, quoting the case number given above, and we will re-open the case.
    Answer # 2
    We have had word back from our engineers regarding your issue.
    The Photoshop Elements team are aware of the problem and are working with Apple and the printer manufacturers to get this to work correctly. In the meantime, the only workaround is to switch off colour management in Photoshop Elements and let the printer handle the colour management.
    Unfortunately we can not make an estimation as to when a fix will be provided. We will close the case for the time being as there really is nothing more we can do about this issue besides offering the suggested workaround. Closing this case does not mean that the research will stop however and the engineers are working on a solution to this.
    As the tech noted, let the printer handle the color instead. Tell PSE not to manage color so it is the step sending the data unaltered. When the print dialogue comes up, under the Color Correction heading, change the pull down menu to "ColorSync". In the menu below that, choose the correct profile for the paper you're using. If the Brightness menu is still active, look for any choice that allows you to turn it off. If none exists, leave it on Normal. If the options below that for Color Balance and Intensity are not grayed out, make sure they are at the center positions (no effect).
    These steps are the same as before, except you're doing them in reverse. Photoshop is doing nothing and the print driver is handling the ColorSync chores rather than the other way around.

  • Prints too dark in elements, ok in easy photo print

    Hi,
    I have been treading around trying to find an answer to my question.
    I´m using Epson PX720WD and Photoshop elements 10.
    When I´m printing with the correct paper settings "premium glossy photo" in elements, my prints gets too dark. If I print them on normal paper and choose "plain paper" they seem better. And they are "perfect" if I print them in easy photo print - Epsons software.
    I read that I have to calibrate my screen and all, but I edit my pictures in elements, save them and open in easy photo print they are ok. There must be a way around, that I don´t have to calibrate my screen.
    Thank you in advance for answers.
    Btw, I´m completly new to this, so please don´t use too complicated words:)
    Brgds,
    Cecilie

    I found something that helped, I let the printer control the colors, and the pictures turned out like I wanted them.
    I found help in this document:
    http://files.support.epson.com/pdf/r2880_/r2880_mc.pdf

  • All my prints using: Lightroom 5, printer color management turned off, and non-generic ICC profile (e.g. Epson Premium Glossy) have magenta tint or cast

    I'm using PC with: Windows 8.1, 64bit, Lightroom 5.4, Epson R3000, 6.75 (latest) driver, color management turned off in printer settings, Lightroom configured to manage color.  If I use a generic ICC profile such as Epson sRGB, the prints look OK.  But when I use any ICC profile dedicated to my paper and printer combination, such as Epson Premium Glossy, or one created using ColorMunki print profile, the prints all have a medium to heavy magenta tint or cast.  The effect can be seen before I even print in the Epson Print Preview.  Yet when I soft proof, I don't see this effect.  I suspect the problem lies somewhere in the CMM process, but I can't pin it down.  Any tips or suggestions are appreciated.

    Thank you kindly for your insightful response.  As it turns out, the answer is half correct.  I've found others who'll say the same thing, that double color management will lead to a very magenta result.  I believe this was certainly the case when I first started playing with the settings,  Where I went wrong, is that after I corrected my settings by turning off printer manages color and letting Lightroom do the color management, is that the Epson Print Preview was still showing magenta with certain profiles.  Not wanting to waste more money on paper and ink, I used the preview to gauge whether I was going to get a normal print or not.  Then one day I ignored the print preview's magenta cast as a 'warning' and I went ahead printed the photo anyways.  Because I used a profile that I created with ColorMunki Photo, the picture came out perfect (i.e. a very good match to what I was seeing in Lightoom on my monitor).  The lesson learned is that for judging the final color correctness, the Epson Print Preview can be way off target and your best bet is to ignore it.

Maybe you are looking for