Elements 12 - Software setup screen??

Where is Software Setup Screen in Photoshop Elements 12 in the trial version; purchased and now need to enter serial number.

If you are on trial application, so whenever you launch Photoshop Elements Editor, it will give you the option to serialize your product.

Similar Messages

How do I locate the Software Setup screen within Photoshop Elements trial product?

How do I get to the Software Setup screen within Photoshop Elements 11 trial product (to convert from trial to paid-up)?

If you are on trial application, so whenever you launch Photoshop Elements Editor, it will give you the option to serialize your product.

I bought acrobat after a trial run. how do I install it? Where do I find the software setup screen?

i bought acrobat after a trial run. how do I install it? Where do I find the software setup screen? I received a message that I shoul just enter the serial number in the software setup screen, but I don't see that when I open the icon.

Help --> Activate
Mylenium

My new 7th gen NANO cannot be connected on either my Windows 7 or VISTA PCs. I have updated to ensure I have the latest iTunes version. When connecting I did not get the setup screens but the NANO assumed the identity of an older IPod. I have reset

I am having problems setting up a new 7th gen IPod NAN or both my Windows 7 and Windows Vista PCs. When first connecting I did not get the setup screens and cannot sync existing media. The NANO assumed the name of a previously installed IPod touch and resetting does not clear this name. I have tried uninstalling and reinstalling iTunes.updating driver software and resetting the NANO without any success

Purchased as new at Best Buy. As far as I know it was noever formatted prior to my purchase

Wrt54g web based setup screens

After entering my password for my router, the basic setup screen
displays, but there are no buttons shown for Wireless or other options.
I can't get to any of the other configuration screens.
I get the same results with IE7 and Firefox V3.
The router functions ok but I can't make any configuration changes to
the router.

To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. The router's setup pages should work, however, you will need to setup the router again from scratch.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Photoshop Elements 9 - Setup Error

If anyone could assist me, it would be greatly appreciated. I am attempting to reinstall my Photoshop Elements 9 software that came with my Bamboo Create Pen and Touch drawing tablet. I have already contacted customer support in a chat session and they recommended I post my problem here instead since it is an older software and their support is apparently only for newer versions.
Around the end of the setup installation process, I receive an error message. Under "Adobe Photoshop Elements 9 - Setup" it says, "Error 1406. Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel."
This is not an illegal copy of the program. It was purchased legally and I have the sleeve that the disk comes in with the serial number on it. When the message appeared, there were 3 options for me to choose: "Abort", "Retry", and "Ignore". I chose the "Ignore" button, but I don't know if that was the correct choice or not. Can anyone help me resolve this issue?

There is a problem with IE10+ in that it is mistakenly seen as being IE1. To get around this either use a different browser or use compatibility view (http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10)

Serial Number Problem, software setup in CS4

I recently downloaded and installed Premiere Pro CS4. The installation was successful. When I create a new project, I get a screen for software setup that asks me if I want to continue using the trial version or if I have a serial number. I select that I have a serial number and enter the serial number provided by adobe. I then get a big red "x" next to the serial number and when I click next, the popup that appears says my serial number is invalid. How can that be since I am entering the one provided by adobe? Anybody else have this issue?

In my case adobe gave me a PC serial and I needed a Mac serial, they provided this later after some customer support contact

New Q10 stuck on Software Update Screen

I've just got a brand new Q10, turned it on and started going through the setup screens, but it's stuck on the software update screen. It'll check for updates for a few minutes and then display a message saying it can't reach the update server and direct me back to wifi setup. It's staying connected to my wifi network, which is stable and has a strong signal, but still has been unable to connect. I've tried rebooting several times by turning it off and back on, and done several battery pulls, but it continues to take me straight back to that screen and starts the whole frustrating process again.
Please help!

I recommend trying again tomorrow... or Monday
it's late right now and the servers might be down for maintenance.
10.2 is slowly rolling out and the servers may be busy right now

My Sony BDV-n9200wl home system is stuck on setup screen?

My Sony BDV-n9200wl is stuck on setup screen? I can't do anything with it? It is like it has frozen. A message does come up about updated software available and to update it but I can't cause I can't get passed the setup screen! I have hardly used it, may 6 times at most! I was told to try changing the batteries in my remote but this made no difference

Hello Kerry-h, thank you for your message. Welcome to SONY Community!
The home theater system (HTS) will stop responding duing the system software (firmware) update if the BD/DVD function was not set before starting the update. Follow these steps if the HTS has stopped responding after trying to perform a system software (firmware) update using the Network update feature.
Unplug the HTS from AC power. Plug it back in and turn it on.
Press the BD/DVD function button.
Re-attempt the Network Update process.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hopefully this post helps you.

Does not open setup screen

Downloaded Firefox setup exe file will not run. When i choose to run as current user nothing happens, it just does not open the setup screen.

Hello janetrhyder, any luck if you try from the next :
ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/23.0.1/win32/
also, disable firewall and every security software for a while and try to install firefox.
thank you

Fields Missing in Parameter Setup Screen

Using Crystal XI
I want to set up a filter for a specific field that is on the report. I right click on Field Explorer/Parameter Fields and click "New...". Then I try to select the field, but it's not in the list available to me (see linked images). It doesn't matter whether I select Static or Dynamic. In the linked images, "Cost_Centers" is what I'm attempting top create the parameter field for. As you can see in the image, it is in the Database Fields list, and the green check means that I am using it in the report. It is a simple text field, nothing special about it, The database is validated and up to date. For whatever reason, "Phase_Codes" is also missing from the Parameter setup screen..
http://i130.photobucket.com/albums/p269/clif001/CR_Parameter_Issue_1.jpg
http://i130.photobucket.com/albums/p269/clif001/CR_Parameter_Issue_2.jpg
Any help?
TIA

It is, but that aparently doesn't really matter. If you look at the images I posted in my OP, the parameter type is shown as being String (Text) and yet there is a date field (Create_Date) listed. However the field that is on the report, and is a String (Text) is not part of the list.

"Software setup" asking for registration number, and saying it is invalid

I registered my CS4 with Adobe in August 09 and have been using it ever since. Until today when trying to open InDesign I get a window that says Software Setup wants my registration code. It says I have two options - Use this on a trial basis, or enter registration code, which I did and it says it's invalid.
It seems that InDesign is the only app that won't open and gives me this window. It doesn't say it's an error, just that I need to enter my reg code.
I didn't buy from Adobe, but if it was pirated wouldn't they have been able to tell when I registered it?
I started a case with Adobe support, but from what I'm reading I don't expect much!
Any Ideas?

Thanks Michael,
I have tried this tool three times and no luck. Adobe says my software came with a pc/laptop that I purchased and I need to get help from the vendor I bought it from. Only I didn't buy a pc or laptop from the vendor. I have emailed the vendor, it's an online store, and they haven't responded, yet.
I have reopened the case with Adobe. Just hope I don't have to buy ID again!

Had to buy a new laptop and am trying to install XI (current and active licensee)....registration setup screen indicates ("Invalid Serial Number")

had to buy a new laptop and am trying to install XI (current and active licensee)....registration setup screen indicates ("Invalid Serial Number")? Account is active.

Is it by any chance asking for a "qualifying serial number"?

I bought my iphone less a month, with a week warranty to be replaced should there be any problem, after a week, while im talking or using any of its softwares, the screen just disappear and i had to restart all over before i can operate it. Please help.

I bought my iphone on 23 June 2011, a week after the warranty period, I noticed that, each time I am on line or using it's software, the screen just disappear and offline just like that, and I had to re-start my iphone.
I have been facing this problem numeral times and not sure what is wrong with it.
Went back to Celcom to report, they asked me to deposit to their technical department and to come back after 2 weeks. (2 weeks) is way too long to wait.
Please help.
Thank you.

Do you live near an Apple Store? If so, pop in and see a Genius, if they discover a fault they may replace the phone there and then, for free as part of your 1-year warranty.

Windows XP Setup screen on Macbook Air

Hi,
once on the WIN XP setup screen, l do not see the option Select “C: Partition3 <BOOTCAMP> [FAT32].”
it only to press enter to install it.
do l just go ahead and do it, or is there something l missed.
l followed everything from bootcamp, and the WIN XP SP2 CD is genuine and for full installation.
Thanks, Marcel.

more information needed
1. on power?
2. move the monitor while powered on, does it flicker / change?
3. Reset SMC
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
4. plug into power an re-verify if same

Elements 12 - Software setup screen??

Similar Messages

Maybe you are looking for