Elements 12 Update Problem

The latest update to Elements 12 has disabled the Editor. I have confirmed this by reinstalling the program and it ran fine until the update was again installed. My OS is Windows 7. What is going on?

See if this helps:
http://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html

Similar Messages

Photoshop Elements Update 9.0.3 problems (Vista 64-bit)

I have attempted several time to process the Photoshop Elements Update 9.0.3 but it always ends with the following message:
"Patch cannot be applied. Please Contact Product Support."
I have not had any success searching for this issue under support, and cannot figure out how to contact Product Support.   When Adobe periodically checks for updates, it always brings this update up - so Adobe thinks I need it. ...    But I am able to use the Photoshop - it just occassionally "hangs" and I need to reboot my computer to resolve the Photoshop issue (other applications continue to work).    I did use the "repair" installation options, but that did not resolve the update issue.
Has anyone else seen this problem, or have any suggestions?    My operating system is Windows Vista 64-bit.
Susan

A couple things to try first:
With all applications closed, find the downloaded update file. It's probably in a subdirectory of
C:\Program Files (x86)\Adobe\Adobe\AdobePatchFiles
(Or you can download the patch manually from the support link below.)
Right-click on the patch file and select "Properties".
At the bottom of the "General" tab, if you see a security message about the file being from another computer, click on the "Unblock" button.
Close the dialog by clicking "OK".
Log off your computer and log back on as an Administrator.
Start PSE9 and apply the patch.
If that doesn't work, Adobe support options can be accessed from this page:
http://www.adobe.com/support/photoshopelements/
Ken

Photoshop Elements Update 9.0.3 problems

I have attempted several time to process the Photoshop Elements Update 9.0.3 but it always ends with the following message:
"Patch cannot be applied. Please Contact Product Support."
I have not had any success searching for this issue under support, and cannot figure out how to contact Product Support.   When Adobe periodically checks for updates, it always brings this update up - so Adobe thinks I need it. ...    But I am able to use the Photoshop - it just occassionally "hangs" and I need to reboot my computer to resolve the Photoshop issue (other applications continue to work).    I did use the "repair" installation options, but that did not resolve the update issue.
Has anyone else seen this problem, or have any suggestions?    My operating system is Windows Vista 64-bit.

Sorry, didn't realize that Photoshop Elements was a separate forum and not part of Photoshop.

Elements 11 problem

computer notice comes up saying "Display driver has stopped responding but has been recovered............then the editor viewing frame freezes but sound keeps going.............then entire program stops.............once whole software deleted! PAID to have it retrieved!   Now it reloads but i lose the new work. Frustrating..........................has worked ok for 2 years,although i would like to push the contrast/bright/light effects further..............
if anyone knows reasonably priced better edit software i would be interested! any thoughts?
thanks.

thanks v much ............saw computer guy today and he sent me in the device manager direction but without all the detail u mention............I may forward your email to him..............
also there was a note from Dell to do a system check up which I did but then it said overall result-not supported/system tests not successfully completed...........says to shut down and try again but now I can't see where to activate test!(icon is gone)
also found an Adobe/elements 11 update device and that is currently being processed............
seems like we may be heading in a good direction...............
will have a closer read of your email.............
again.thanks...............
WEBSITE         www.kimmilesfilms.com      AND    www.innersense.com.au/mif/miles.html
AND THE BLOG      http//www.kimmilesfilms.blogspot.com/
Date: Mon, 3 Mar 2014 08:02:52 -0800
From: [email protected]
To: [email protected]
Subject: Re: elements 11 problem elements 11 problem
    Re: elements 11 problem
    created by A.T. Romano in Premiere Elements - View the full discussion
fixmyproblem
Thanks for the reply and the information that your Premiere Elements 11 is running on Windows 8 (presumed 64 bit) computer.
Because you come with a display issue, the first line of troubleshooting is targeted at the video card/graphics card that the computer uses.
This information can be found in the computer under the Device Manager/Display Adapters. And then you tell us what is listed under Display Adapters...you may find one or two names listed. Please report what you find.
In Windows 8, one way to Display Adapters listing
a. From the Metro App Screen, type Control Panel in the Search that appears to the right of the screen, and then click on Control Panel in list below.
b. In Control Panel, click on the header "Hardware and Sound"
c. Under Device and Printers, click on the Device Manager choice
d. In the Device Manager, open the Display Adapters category to find your video card/graphics card information.
There may be a keyboard shortcut to Control Panel (I know it is there in 8.1 64 bit)...Windows Key + X and selecting Control Panel from pop up at right of the screen. You can be in the Desktop App or in the Metro Screen when you do the Windows Key + X.
Once we know that, we will ask you to go to the web site of the manufacturer of the card and determine if you have the latest version of the card's driver installed.
If all this is going to be too much for you to handle, then it might be a good idea to consult with the people who installed your Premiere Elements 11 for you.
We will try to walk you through whatever we can.
Please let us know how you wish to proceed.
Thank you.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6174213#6174213
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: elements 11 problem
To unsubscribe from this thread, please visit the message page at Re: elements 11 problem. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Elements update 9.0.3 will not install

I migrated my Elements 9.0 program from a Windows 7 Laptop to a new Windows 8 laptop. As I was downloading the Elements update 9.0.3 I resieved an error message that it could not perform the install. What do I do now?

What error message are you seeing when you run into the installation problem?
This Apple article might help ya out -> Trouble installing iTunes or QuickTime for Windows

Update problem - VBDATA table

Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico

Chart x scale update problem

LabVIEW 8.5.1
Sweep Chart Problem
The x scale values do not update until after the 2nd sweep. The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
It appears to be a problem with the chart, since it happens with any vi with a sweep chart. I've used versions 6 through 7 for years and never seen this. I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
I've included a simple example.
Thanks much,
JSC321
Attachments:
Chart Sweep Scale Update Problem.vi ‏32 KB

You have a typical race condition!
There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
(Execution order is enforced even if the wire value is not even used inside the loop )
Try it!
Message Edited by altenbach on 12-23-2008 11:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HistoryRace.png ‏10 KB

Updating problem...I have a update that starts out going through but then does not finish just keep running

also with the update problem it says software update and below the running bar it says connecting to the server

Please do the following: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

10.5.7 update problems

After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

jjtopspin wrote:
Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

Cache update problem in Integration Directory

Hi all,
We have a cache update problem in our PI development server.
If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
We have tried:
1. Clearing the SLD Data Cache.
2. Did SXI_CACHE complete refresh.
3. Did CPA cache refresh.
4. Did a complete cache refresh of the server.
5. Restarted the server.
But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
Thank you very much.
regards,
Jack Nuson

HI Jack ,
first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
Perform a full cache refresh using the URL
http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
Regards,
Saurabh

Twitter Update Problem

Seems I have a Twitter Update problem. 1. I have no pirated software on my computer either from the App Store or anywhere else. 2. I did buy a set off templates for iWork through the App Store with my Bosses Apple ID (it's for work). Is that really the problem. That's ridiculous. The apple ID is mine, as is much of the software, but it's a computer use for work. If this is true it makes the App Store a lot less useful.

my apologies I was so annoyed. I didn't bother to state my issue. The issue is: Twitter is constantly asking to be updated. Even after it's updated. Even if it's deleted. I looked at the forums for a solution and found that people were having this problem who installed pirated app store apps.
I am logged into the app store on my account. All but one of the apps on my machine that come from the app store are on my account. However there is one piece of software on my account that I purchased, by logging out and logging in with her ID, purchasing it, installing and logging out, and again logging in as myself. I don't have an issue with that app. However Twitter, which was installed under my username, constantly says it needs to be updated. Hope that makes it clearer.

HT4623 Update problem

Hello
How do i solve problem when i'am doing my update from 5.1 to 6.1.2 the massage (3194) occured. Please help me to solve this update problem.
I'am using iphone 4

See this support document http://support.apple.com/kb/ts4451

TS3694 im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to r

im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to restore?

Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.

Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!

Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

Jelly Bean Update Problems on Xperia S Tablet

I think we need a new topic for Jelly Bean update problems and fixes.
Solved!
Go to Solution.

small fonts and icons blurry pixelated in notification or google agenda widget
browser crashes a lot.
Missing jelly bean home launcher
Wifi disconnecting for no reason.
Animations aren't smooth tough tablet is more responsive then android 4.0.3 release6b

Photoshop Elements 6 Problem

habe unter "Anzeigen" die Taste:
Fotos nebeneinander anzeigen und vergleichen - gedrückt und kann diese Funktion nicht mehr rückgänig machen. Es werden bei mir jetzt statt bisher
18 000 Bilder weit mehr als doppelt so viele angezeigt - stört mich sehr !!!!
bitte helfen Sie mir !
D a n k e !!!

Thema
Photoshop Elements 6 Problem
Ingrid237 - 07:34am Jun 10, 2008 Pacific
habe unter "Anzeigen" die Taste:
Fotos nebeneinander anzeigen und vergleichen - gedrückt und kann diese Funktion nicht mehr rückgänig machen. Es werden bei mir jetzt statt bisher
18 000 Bilder weit mehr als doppelt so viele angezeigt - stört mich sehr !!!!
bitte helfen Sie mir !
D a n k e !!!

Elements 12 Update Problem

Similar Messages

Maybe you are looking for