Elements 13 - top menu causes mouse to become erratic

when clicking on a top menu item (ie file or edit or image, etc.) the mouse pointer becomes erratic until the menu is closed.  It is so bad as to be unusable.  This only happens with Elements 13.  Any suggestions?

HI,
It would be helpful if you could provide us with the following information:
1. Which OS are you working on?
2. Are you using wireless of wired mouse?
3. Please try clearing preferences of PSE13 editor (keep pressing Ctrl + Alt + Shift while launching editor) and see if the issue still exists.
Thanks,
Anwesha

Similar Messages

  • Photoshop Elements 8 top Menu bar?

    Hi everyone,
    I have just bought Photoshop Elements 8 after using PSE5 for about 18 months or so.  I am having difficulty in reading the top menu bar where the black text is shown against a very dark grey (dark sea grey in model aeroplane terms). Can any one tell me if it is possible to change the colour/shade of this top menu bar to some more easily visible combination, say something like PSE5, with which I had no problems?
    Many thanks in advance.
    Dr. How.

    Unfortunately, your only options are that, or the white on black (preferences>general), which is actually less awful for most people (a bit more contrast), but still  not good.

  • What causes my synaptics mouse to become uncontrollable in Photoshop elements?

    What causes my synaptics mouse to become uncontrollable and keep scrolling in Photoshop elements?

    This appears to have been due to a bad video card.

  • Photoshop elements 11 just after installation in the editor the mouse does not even scroll top menu

    HI guys
    Very dissapointed so far by this adobe soft, that I just installed a few hours ago. At this point it is worthless and no way I can use it like that . After installation I went directly into the editor and right away I saw that the software was very sluggish with my cursor dragging . After clicking on a top menu (File) the menu bar open  (5 sec.)and if I scroll it down  I do not see the blue color following my cursor, and if I click at the location in the bar of my cursor it takes a few second before it respond. I am also using the following adobe softwares that works flawlessly : Photoshop CS5.5 extended; Bridge; Camera Raw; Lightroom 4.2. My computer uses an Asus P7P55-E Premium motehrboard with Win 7 pro 64 bits with an intel I 860 2.8 mhz and 8 gigs of RAM. All my adobe softs are 64 bits, except for  elements 11. After seeing that,  I installed the upgrades without any visible problems. Even after that nothing has improved.
    I have to say that I have quite a few softwares installed that all work perfectly  such has Topaz bundle; Photomatix pro, etc.  In fact of all my softwares this is the only one that is giving me troubles.
         I hope somebody has a solution for this extremely poor behavior.
    Thanks
    Luc

    I think you are using Win7, if yes please try the following
    Right click on the PSE icon and select Run as administrator
    Now try to use it, check if there is any change or not.
    Harshit

  • Attempted to alter security settings and the result is that password no longer works.  Tried CMD R but mouse inoperative and cannot access top menu for utilities

    I tried to alter security settings resulting in rejection of my password.  Tried booting using CMD R but non operating mouse pad means I cannot access top menu to select "utilities"

    jmcg60,
    which security settings did you try to alter? Do you have a USB mouse that you could use in place of your non-operating trackpad?

  • Premier Elements 13 crashing whenever I try and use the top menu? Why?

    Recently purchased Premier Elements 13. I am in the middle of a project and although I can edit the timeline if I try to do anything from the top menu it simply crashes and closes the programme down. Any ideas?
    I am using a PC Windows 7. Have all the updates and installed Quick Time. What else can I do?

    Vince
    Sort of a check list to make sure that nothing got overlooked by me along the way...
    1. Did you double check the video card/graphics card's and its driver's control panel offered you in the computer to determine if there are some settings there that you could fine tune?
    2. Have you created a new User Account with Administrative Privileges and installed and tried to run the program from there? I think that we mentioned that but
    I am not sure of the outcome on that - whether it was put off temporarily or done and found not to matter.
    3. Did you ever work with new source of installation files?
    http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
    Remember to read and carry out carefully the web site's "Note: Very Important Instructions" to avoid an Access Denied message.
    Do you have any video editing or special programs on your computer (maybe even special plug-ins or codecs that you installed) that
    might be candidates for interfering agent.
    ATR

  • 64 bit Ubuntu 10.10 FF 3.6, top menu does NOT function nor does mouse right-click, all other applications O.K.

    Running 64 bit Ubuntu 10.10 upgraded from 10.04
    Running latest 3.x.x Firefox
    On rebooting this morning the top menu does not function at all, nor does mouse right-click.
    Did 'complete removal' in Synaptic and reinstall to no avail.
    Thunderbird and Google Chrome functioning fine.

    Fixed!
    open a new instance of Firefox (ctrl-N). You will notice all is working now. Close the old instance, so whatever Firefox remembers as your last instance is the new, good one. Worked for me. This problem seems to have been around a while already, this fix dates from November 2010...

  • Top menu bar becomes blotchy on my macbook air

    When the computer is fresh from start up the top menu bar of my macbook air is fine but as soon as I open any applications such as Safari, the menu bar goes blotchy as if it has some shadowy effect on the words.
    It started happening just yesterday and my air is pretty new- like a little more than a month old?

    You may try this applescript program.
    log "  --- Starting on " & ((current date) as string) & " --- "
    -- percent
    set volume output volume 35 without output muted
    Start the AppleScript Editor
    /Applications/AppleScript/Script Editor.app
    In Snow Leopard it's at: /Applications/Utilities/AppleScript Editor
    Copy the script text to the Applescript editor.
    Save the text to a file as an application and do not check any of the boxes below.
    If you want access to the script from your Script Menu, move the script (the saved script application file) to your
    ~/Library/Scripts folder. You can also drag it to your Dock or make an alias for it on the Desktop.<br><br>
    To debug, run the script within the Applescript Editor. Click on the event log tab at the bottom of the window. Click  on the run icon.  The results from the log statement will be shown at the bottom of the screen.

  • Accessing the top menu without using the mouse

    i just switched from a pc and am trying to figure out how to use the keyboard most efficiently. how do i get to the top menu (file, edit, etc.) off of keystrokes? once i'm up there i can just use the arrow keys to move from menu to menu.

    dre1973
    I deffinitly saw this and tried it. It is possible to do. I just don't use it and I forgot how. I saw it during the first months of last year on the Apple start up page under something like hot new tips for using Tiger or some such.
    I copied this from an entry by someone else:
    get a book called "The Missing Manual: Mac OS X, Leopard Edition" this book is the greatest information source for a mac I have ever seen. It tells you step by step how to basically do anything you want on a mac. For a 25-30 dollar investment, 900 pages of information, i felt it was well worth it. it can be picked up online and at your local barnes and noble or borders.
    It is probably in this book if we can not find it in "key board short cuts" here in apple support.
    hope you find it

  • Dreamweaver menu widget mouse over

    Hi
    I'm trying to get my head around the menu widget in CS3 and thing are progressing ok.
    Things are progressing, but I have two small questions relating to this screenshot: http://www.violetmount.com/August/menu.png
    1. How can I only make the menu appear when I move the mouse over to it?
    2. Is there any way to have the top menu cell transparent?
    The first one is probably the most urgent at the moment! All the examples I've seen have the menu sitting there all the time, whereas I could do with it working like the menu bar in applications.
    Thanks
    Alexis

    Is it the roof or the driver's side window?It's where the 2 meet - it's a t-bar roof
    If is the window, try to determine if the seal
    between the window glass and the door frame is
    somehow messed up- bent, dirty, something that
    prevents a tight seal. You'll need to fix that, if
    that is the cause.There is no door frame!
    Like I always say, you can never have enough
    lubrication. Use some clear silicone spray on the
    window seal. Same with the door-to-frame seal.Ah, interesting. Thanks
    (this is actually the cure for said woes, so you've inadvertently set a dangerous precedent here!)
    If it is the roof itself, you'll have to perform
    similar investigations to determine the source of the
    leak.
    Hope that helps.It has, thanks!

  • May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

    May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

    Or you can actived the right button on your magic mouse and click on they icon in the dock. then you select "stop" and it's out of your dock.
    Greetings
    *update: Sorry, my mistake! I didn't read your message correct! Sorry for the inconvience!

  • Please Help SL - Everything 'quits unexpectedly' and top menu bar flashing

    Please Help. Snow Leopard - Everything 'quits unexpectedly' and top menu bar flashing.
    Basically, I have been using snow leopard for about 1-2 weeks now without any problems, apart from the strange trackpad expose glitch, but I can live with that. But a new problem has arisen that I CANNOT live with. Basically I plugged in my MiniDisplay > VGA adaptor and a Wacom internet tablet for the first time. And when it booted up rather than just the usual spinning gear, their was a progress bar as-well. Then it booted into Safe Mode.?
    Everything was fine in safe mode apart from spotlight didn't work properly so I rebooted and this time it loaded normally. EXCEPT about 5 minutes after I logged on the top menu bar started to flash on and off about ever 1-2 seconds and virtually every single application would quit unexpectedly before even loading. I haven't really looked into it apart from a quick search on google which doesn't seem to bring up anything similar, but atm I am having to use my bootcamp partition with windows installed (shock horror :D) just so I can browse the internet.
    Additional details -
    I have tried resetting PRAM + NVRAM with no joy
    While logging on (before it crashes), menu items (e.g. Airport, Battery Indicator, Facebook Notifier) all load up on the far right BEFORE the clock, which never happened before the problem, don't know if this will help isolate the problem, but its worth mentioning..
    Don't really want to go down the fresh install route if possible, as I did this with leopard about 2 months before Snow Leopard was released

    I noticed it some weeks after installing Snow Leopard, and didn't think much about it since I have a Wacom mouse, and the Wacom driver often has some little peculiarities at startup with the Mac OS--sometimes everything is perfectly ordinary, there will be an OS update and a little oddness shows up, the driver eventually gets updated and the oddness disappears until some other OS update, and so on. I just figured that was what it was until my brother asked about the missing the menu bar after startup, which reappears with a click. He doesn't use a Wacom mouse, but he does have some other 3rd party mouse. I don't know whether 3rd party mouse drivers are at fault or not. But it is not a problem with the SystemUIServer.....the entire menu bar is missing, not just a goof-up on the Spotlight end, where SystemUIServer is in charge of things. Since simply clicking the mouse brings the menu bar up I've never even bothered to check the logs to see if anything is noted there.
    Francine
    Francine
    Schwieder

  • Mixed bag  1.     I have a security app on my computer, Flashbrief.  I have it checked in the hide column but whenever I turn on the computer it appears in the top menu line.  2.     Whenever I turn on the computer, a new blank document window in MS Word

    mixed bag
    1.         I have a security app on my computer, Flashbrief. I have it checked in the hide column but whenever I turn on the computerit appears in the top menu line.
    2.         Whenever Iturn on the computer, a new blank document window in MS Word 2011 appears.  I do not have this listed in the login items.
    3.         I have a current model of Apple wireless mouse. It keeps getting stuck in text or e-mails and I have to somehowotherwise move the cursor to break it free.
    Help with any of these will be appreciated.
    BF

    1.         I have a security app on my computer, Flashbrief. I have it checked in the hide column but whenever I turn on the computerit appears in the top menu line.
    I've never heard of this software, and cannot find any reference to it online, which is a bit concerning.  What is it supposed to do?  There really isn't much need for security software on a Mac.
    2.         Whenever Iturn on the computer, a new blank document window in MS Word 2011 appears.  I do not have this listed in the login items.
    In Mac OS X 10.7, any applications left open when you shut down or restart are re-opened at startup, and any documents left open in an app when you quit are re-opened when you launch them again.  The former can be controlled by unchecking the box in the restart/shutdown alert:
    You will need to do this each time you shut down or restart, it won't remember that setting.
    The latter can be deactivated by unchecking the box in System Preferences -> General:
    3.         I have a current model of Apple wireless mouse. It keeps getting stuck in text or e-mails and I have to somehowotherwise move the cursor to break it free.
    That does not sound normal, but I don't use a mouse with my MBP, so I can't provide a solution, other than to try replacing the batteries in the mouse.

  • How can I make PLAY button be selected by default in top menu?

    Hi, I usually have the PLAY button and all the scene selection buttons show up in the same top menu on my DVD's. Is there a way to have the PLAY button be the one that is initially selected when the DVD starts up. In other words, I don't want people to have to scroll the various buttons on the menu to get to the PLAY button. I want it to be selected by default, so all they have to do is hit the PLAY button on their remote control to start the movie.
    Thanks, Bob

    I think Robert was referring to the triangular play button on the simulator control panel rather than the button on his menu marked 'Play'...
    Robert - the 'Enter' button (or your 'Return' key on your keyboard) are the only ways you'll get the simulator to begin to play your project. The Triangular play button is for when you are in a motion menu or track and you pause and re-start playback, and isn't used to select entries on the menu. When you start a track, note how the triangular play button becomes a pause button when the track starts running, and it is no longer greyed out... if you click it, you'll see the triangle return and also not be greyed out.

  • Where has my top menu bar 'Logic pro x, file, edit, track, etc' gone?

    Yes, a noob question but your assistance would be appreciated as I am trying to rewire Reason through Logic.
    The top menu bar was there, but now it is not.
    Where is it hidden please?

    In the screenshot you provided Logic Pro X is running in Full Screen Mode not Windowed mode
    When looking at the main Logic Pro X screen... If you move your mouse pointer to the very top of the screen the menu bar should drop down and appear
    If it does not then...
    To put Logic Pro X into Windowed mode when looking at Logic Pro X press  Control + Command + F together....
    Now you should see the Logic Pro X  menu bar at the top of the screen
    It will look something like this...

Maybe you are looking for

  • Calling a soap web service from a java desktop application

    Hi, Does anyone know how to call a soap web service from a java desktop application? I've seen examples using Apache Axis, but it sounds like Axis needs to run on a web server and we are trying to avoid that. My initial thought was that, "of course w

  • How to Convert 44.1 to 48k in the timeline

    Working on FCP 5 I imported a couple of music cues iat 44.1. Is there a quick and easy way to convert these tracks to 48K without leaving the project? Thanks

  • Horizontal scrollbar for JComboBox

    Hi, I want to use Horizontal scrollbar for JComboBox which i have used as an editor for table column cell and the matter in drop down list is larger but the width of column of a table is relatively small Any suggetions! Thanks and regards, Nilesh

  • Camera RAW functionality in Photoshop and Elements

    I am a Photoshop Elements user (6/Windows) and I was wondering if the Camera RAW plugin had different functionality under Photoshop when compared to Photoshop Elements. In several places over the net I have read references to fixing lens chromatic ab

  • What happened to my pen tool?

    Everytime I've ever used FC I've had access to changing the audio levels right in the timeline with the pen tool. . why can't I do that now? I've looked this up in my book and can't find a clear answer. Also, helpers I've asked "in person" are tellin