Elements 3.0 - Undesirable green frame (help to remove)

Hi everybody
I have PS Elements 3.0.
I made something wrong and the frame around each images in Editor is now GREEN instead GREY. I do not know what I really did to change the background color and tried uselessly to back many times...
Clicking the following FTP link you can see the problem
http://www.lyraconsulenze.it/FtpUserForServices/Greenphotoshop.jpg
Have you any suggestion how to change the backgroud color ?
Many thanks
Paolo

Hi Barbara, I was out until today
I tried your suggestion and now is OK !
Many thanks for your support

Similar Messages

Random Green Frames in Premiere Render and Export Files

Hello!
I just switched a new MacBook Pro and am having a render issue in Premiere CC. Random green frames pop up sporadically throughout my video. This happens both on my rendered timeline and in the exported file. It seems to affect the clips with heavier color correction. What is happening and how can fix it?
Here's a link to the video on Vimeo. You will see green frames at 00:04, 00:43, 01:03, 01:39, 01:48, 01:58 and 02:25.
I'm editing on Premiere CC. Most of the clips have heavy effects work (motion, fast color corrector, RGB curves and a circle overlay for vignetting). All footage and project files are stored on a WD My Passport 2TB Portable External USB 3.0.
The footage is from a 5D Mark III set for 1080p IPB, so files are .movs.
Exporting in H.264 with the Vimeo HD 1080p 23.976 preset, not changing any of the preset settings. But again, the issue also occurs pre-export, after rendering on the timeline.
MacBook Pro
Retina, 15-inch, Mid 2014
Processor: 16 GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GT 750M 2048
Software: OS X 10.9.4 (13E28)
Please help! Thank you!
Stephen

Problem fixed!
Someone from the Adobe support team instructed me to change the renderer to software only mode. This can be changed under File>Project Settings>General. More specifically, I changed it from Mercury Playback Engine GPU Acceleration (Open CL) to Mercury Playback Engine Software Only. I deleted the old render files and reexported without any further issues.
Success!

My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me

My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me

Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy

Green Frames in Exported Files

I have noticed, since moving to DSLR 1080p video, that my workflow ends up with lots of seemingly random green frames, and Premiere Pro crashes a lot more.
My system is a brand new system, and I have never had this happen before, on either my old system (running CS3 and SD video).
I have had the green frames appear in 3 different cases, and often, all of them simultaneously: when scrubbing or previewing my timeline, when exporting to a move (mostly I use 264.BlueRay, but it happens with other file types too), and when trying to cross with After Effects (both, importing a timeline into AE, as well as importing an AE project into PP).
I have tried clearing my media chache files and database, changing my memory settings (allocating anywhere from 8-13GB for PP), optimizing for both memory and performance, changing my playback quality, re-installing both PP and AE, changing the Renderer to both "Software Only" and "GPU Accelartion", and restarting.
It is almost like the link manager is not linking to the source file properly, because I can place another clip in the timeline in place of the "green one", and that works, as well, if I manage to export the clip, I can replace the original with the newly exported one, and that works. I believe this is also the case in regards to the issues I have had trying to work with AE, as it seems as though I am creating too many cross links and it just doesn't like it. Finally, when I view my task manager, sometimes the "Adobe DT32 Server.exe *32" is using a HUGE amount of memory, just under 1GB itself...this is when PP tends to crash the most.
It is totally possible that I have missed something, or my constant changing of settings isn't helping the situation, or my lack of knowledge of the "technical" end of PP is my downfall, so I am willing to take any recommendations and/or feedback on how to fix this...it is happening with all my projects and is a real pain to try to work around.
I have created a short screen capture video to show what I mean. The first bit shows the files working in the preview window, but when I overlay the exported .m4v file, you will see that there are green frames exported instead of the proper video (and, as I mentioned, sometimes this just happens when scrubbing and previewing, even without exporting). http://screencast.com/t/AQMWLUC2x
Thanks!
System Specs
- Windows 7 Home Premium (64bit)
- Adobe CS5.5 Master Collection
- i7-2600k 3.4Ghz
- 16GB DDR3 1600MHz RAM
- 240GB SSD for OS and Programs
- 2TB HDD strictly for video
- 350GB HDD scratch disk
- 1000W power supply
- NVidia GTX570 Video Card
- 2 24" Acer monitors

Thank you.
It looks like the camera shoots H.264 full-AVCHD, and a couple other similar modes.
If you shot in the full-AVCHD mode, 1920 x 1080, and us that footage in a matching Sequence, there should be no red line above the Clips (sounds like what you have), and the footage should edit just fine on an adequately fast system, providing that you have copied the full folder structure from your camera's card to your system.
You should not need to install any Nikon software to use this footage. That was just in case your camera used MJPEG CODEC, like many other Nikons do/did. For MJPEG, one often finds that they need their camera mfgr's. exact, tweaked version of MJPEG, and that is often installed only with other software from the camera's utility disc. Not your case.
Also, the Nikon AVCHD is not the only footage type displaying the problems.
In my mind, we have ruled out a lot of possibilities, but that does not address your problem - random green Frames.
Sometimes, odd Frames can be a display driver issue, but yours are showing up in the output files too.
You have tried with both MPE hardware ON and OFF.
It does sound like ADL is not doing "its thing" properly, all of the time, but unfortunately, I am at a loss, as to what could be the cause.
Thanks for taking the time to answer a few questions, and also for doing a very good post. Wish that I had some ideas on how to test, or suggestions on what the cause might be. As there are not tons of others, shouting "me too," it seems that the issue is either specific to your installations, or your system (seems like you have a more than adequate system, but perhaps Harm, or Bill G. will spot something, that I missed).
Good luck,
Hunt

Random Green Frames When I Import Video?

Hello,
I Have Final Cut Pro X and I make videos on youtube as it is my job. I got gaming footage recorded via Eye Tv and Exported it normally as a H.264 and it was 720p HD and a .MP4 File. When I import it onto Final Cut Pro X I See Random Green Frames Just pop out of no where "In The Video" and I have no way of taking it out. Please help ASAP as it is VERY Frustrating .
Thanks So Much,
Im looking forward to some replys
-eLeVaTiiONz
Info:
Macbook Pro Late 2010
Newest Version Of Leopard
Other video content works
Content that does not work is recorded by a hauppauge HD-PVR Using Eye TV
PLEASE ASK IF YOU NEED ANY MORE INFORMATION.

See this guide about how to import camcorder video to iMovie step by step.

Potential workaround for green frame issue

Hi,
We are sorry for the the inconvenience caused by green frame issue on some laptop models.
To work around the issue that some users are experiencing in the 1.6 version on specific machines, current suggestions is to add 3 more lines above the last two lines of shared.xml that is located in the C:\Users\your_username\AppData\Local\Packages\Microsoft.SkypeApp_kzf8qxf38zg5c\LocalState
Note: Make sure Skype is closed (press ALT+F4 with the Skype app open) while you are modifying shared.xml file and make sure you save the changes in the file before starting Skype again.
Also if you don't see AppData folder in C:\Users\your_username go to View tab and check Hidden items checkbox.
</Lib>
</config>
should be replaced with
<Video>
<EnableWideSupport>0</EnableWideSupport>
</Video>
</Lib>
</config>
Please try this and post if it solved your issue.
Thank you in advance

In addition to the above fix, we would be grateful if you were experiencing green video that you help us by doing this:
Please go to Search, type dxdiag and run dxdiag.exe, go to Save All information and send generated DxDiag.txt file to kmudrovcic at hotmail.com.
Thank you in advance

FCPX green frames/artifacts and dropped frames

I have been trying to use FCPX for a couple of weeks now, but haven't been able to. I constantly get green frames/artifacts and dropped frames during playback AND export regardless of using optimixed or proxy media. I am importing mp4 quicktime files, in case that is important.
I am using:
MBP (mid 2009)
OSX 10.6.8
Intel Core 2 Duo @ 2.26 ghz
2 gb ram
Nvdidia GeForce 9400M w/256 vram
I know that it is reccommended I have 4 gb ram, but I meet the minimum requirements and cannot even use the program! Would upgrading to 4-8gb ram resolve this issue? Or is my processor the culprit?
Any help is greatly appreciated.

You DEFINITELY need to upgrade your memory to 8GB, etc. Otherwise you will not likely be able to get much real work done at all ... but ... that is likely not exactly the problem you are experiencing now . Since you are talking about bringing in MP4 files, I am thinking you did not get them from a tape-based camcorder. If you did, then they were converted to MP4 afterwards somewhere. Can you play the MP4 files in Quicktime and not see any green screens? If so then have you tried using the FCP X File/Import ... Files command to bring them into FCP X? I have used this with MP4 files without a problem. If Quicktime can play them okay without green frames, and FCP X cannot then the problem does seem to be in FCP X. Are your preferences set to use optimized media? If so then FCP X will convert the files to ProRes and the timeline playback should be okay. There are other "green frames" discussions here that you could also reference. These are just some thoughts.

Intermittent green frames

So firstly my comptuer specs:
Mac OS X 10.8
iMac
3.06Ghz Intel Core 2 Duo
8GB RAM
and 1TB+ free disk space over my comptuer hard drive and external drive
and the footage I recorded off was on an iPhone 4s (running 5.1.1), so its 1080p at 30fps
So I've created a project and brought in the videos from my phone and then every few frames there will be a blank green frame for some reason, and I've exported it straight to a .mov file to see if this fixes it, but it doesn't, and I've also sent it to compressor but that still gives me green frames, and I've also tried all four different render options, can anyone help sujest what I do besides manually remove every frame that is green?

helloyesthisisdaniel wrote:
… I've tried that and instead of the green screen I know get the previous frame thats drawn out for around the next five frames, …
it seems, you do have what was called in the analogue days a 'drop out' - for whatever reason.
an iPhone on a tripod??
why not a 'real' camera??
… would have the advantage, your recording device doesn't have to care simultanously for incoming calls, pushing mails, measuring GPS, calculating it's horizontal and vertical position, saving the latest Angry Birds highscore, ..
… you got idea … ?

Green frames in events and transitions

Can anyone help please?
I have been editing happily away for months now with no problems overnight I am getting green frames instead of transitions and some green frames in the events windows when i scrub over the top.
I have tried emptying render files for the particular project but it does not help. I have not changed anything
J

i'm sorry i meant Project Render Files. Do not delete the media files.

Export - QuickTime results in green frames, mis-aligned audio

I have the latest Final Cut Studio with Final Cut 7. I used to use Final Cut Express 4 and recently upgraded. With FCE 4, if I went File-> Export-> QuickTime (not QuickTime conversion) it would rapidly export my project in full quality (albeit a huge file size). It didn't matter how many effects I had or layers of video, the quality was always the best. However, with FCP 7, when I do the same thing, even the simplest transition or effect will throw off the audio and result in green frames instead of my effect/transition. The project settings are the same ones I used in FCE 4, and the project is always fully rendered and prepared. _*+Can anyone tell me why this is happening and how I can fix it?+*_
I need to be able to use this option because I do videography for the Drama Festival in Massachusetts and I need to be able to edit up to the last minute. This form of export is so speedy and lossless that the file size isn't important.
I use a unibody MacBook Pro (Mid 2009) with 4GB RAM and 500GB HDD, and I always switch to the Nvidia 9600GT for editing.

General
Frame Size: 1280 x 720 HDTV 720p (16:9)
Pixel Aspect Ratio: Square
Field Dominance: None
Editing Timebase: 29.97
*QuickTime Video Settings*
Compressor: H.264
Quality 100%
*Clip Properties*
Vid Rate: 29.97 fps
Frame Size: 1280 x 720
Compressor: h.264
Data Rate: 1.1 MB/sec
Pixel Aspect: Square

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

With green chroma concept, I removed the green background, now the green background is seen black. I don't want to have any other background clip, but I would like to change the background black to white. Please help me.

With green chroma concept, I removed the green background. Now the green background is seen black. I don't want to have any other background clip, but I would like to change the background black to white. Same like the advertisement clip in the Apple Website. Please help me.

If you want the whole of the project background to be white, you can change the colour in FCP X preferences.
If you just want white for a section or clip, use a custom Generator from the Generators Library and change it to white in the Inspector.
Andy

Green frames when exporting from CC 2014

Hello. I just updateted to the newest edition of premiere pro(aswell as all the other CC software i have installed which includes phoshop,speedgrade,audition,ame, and after effects). So the versions of the software are the very latest.
My computer is late2013 macbook pro with nvidia graphics card, and i have all the system updates installed, nothing special going on.
Heres the issue:
When exporting the project, i get random green frames, full green frames. Complitely randomly, no pattern whatsoever.
My workflow have been this: Footage shot with two Sony cameras and i have encoded all the materials to mxf format with one step earlier AME version. I started the project with one step earlier premiere, and i have already done 19 out of 23 sequences that project contains, no problem at all with earlier version of ame&premiere. Now i updated to the latest 2014 cc and these green frames started to pop out randomly. I have not used any plugins or effects, only premieres own threeway colorcorrector and bightness&contrast. Parts of the clip have transparent black video as textbackground with crop effect applied and basic textlayer from premieres own text editor. I have exported few grpahics from aftereffects (both the lates and the one step earlier version) to proress 4444 format as RGP+alpha. And im exporting with using youtube SD widescreen 360p settings, nothing changed. Again, everything worked perfectly before update.
things i have tried sofar:
delete caches both manually and from each software
normal boot
pram reset
safeboot
update check
export XML from 2014 cc and import to earlier premiere -> no luck, things got messed up somehow
made a copy of both project files, i compared and changed some version number from 27 -> 26 so i could open the project in earlier premiere -> no luck (this worked back in cs6 time when i had to import cs6 project to cs5.5)
Kinda running out of time, so rest of the night im going to spend re-editing those sequences i have done today with newer version of premiere. Will adobe pay for me for these extra hours, i think my client wont approve one extraediting day(night becaus of the schedule, these must be ready tomorrow with no green frames) because of software problem?
Ask anything you want, i'm 100% sure this is not user error since everything was fine with one step earlier premiere version. I will copy&paste this to the bugreport too.
Thanks

Temporary solution for this was "export xml" after all. I had to disable all graphics and textlayers and delete colorcorrections, and flatten multicam, so i had to redo all grading ja graphics stuff in older premiere after importin FCP xml. But got the work done in time. Won't use cc 2014 in near future unless someone figures out what is wrong with green frames. (well actually now im exporting from older AME, will she if the green frames pops out there too, wouldn't be too much surprised....)

My photoshop elements 9 keeps freezing, can you help me?

My photoshop elements 9 keeps freezing, can you help me?

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 10\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

When scrubbing through all of my clips, the video lags and there is a green frame that stays on the screen.

In the viewer, not the timeline, I scrub through the media that I have (1080i video) and the video lags. There is also a green frame that hovers over where the cursor is when scrubbing and I can't see the clips. Final Cut should be running smoothly...
MacBook Pro 2009
Mac OS X 10.6.8
2.26GHz Intel Core 2 Duo
4 GB RAM

Computer:
MacBook Pro 2009
Mac OS X 10.6.8
2.26GHz Intel Core 2 Duo
4 GB RAM
Still have over 80GB left...plenty. Thanks

Elements 3.0 - Undesirable green frame (help to remove)

Similar Messages

Maybe you are looking for