Elements 5  and 8 and CS4 on same PC

I have Elements 5 and CS4 on a Vista PC.  I want to add Elements 8.  Different users using different programs.  Can all three be safely and effectively used on the same machine?  If not, does a simple uninstall of E5 allow successful installation and use of E8?

All will work properly on the same computer.

Similar Messages

  • CS3 and CS4 on same comuter

    Hello all,
    I have CS3 production premium suite on my laptop.  I upgraded to CS4 production premium suite.  I have to keep CS3 on my computer befause I have certain plug ins for Premiere that won't work in Premiere CS4 (cineform prospect hd and Procoder 3). 
    The problem is that my Adobe bridge no longer responds in PS CS3.  Adobe Bridge does work in PS CS4.
    Can I get it to work in both?
    Thanks

    Brad Lawryk wrote:
    I just re-read your original post.
    Did you upgrade your CS3 to CS4 or purchase the complete CS4 package?
    If you bought the upgrade, I do not think you can run CS3 and CS4 on the same machine because it will make CS3 into CS4 and remove CS3.
    Not correct: it does not "remove CS3". Each upgrade is in fact a complete installation in its own folder structure.
    Obviously you can't have both running at the same time, but a lot of people keep at least one previous version installed.

  • CS2 and CS4 on same computer?

    Hello! I hope this has not already been asked and answered but I did honestly try to find an answer and failed. Anyway:
    Mac with CS2 currently installed.
    QUESTION: If I buy the CS4 upgrade, can I install it and have both CS2 AND CS4 running on the same computer? Not necessarily simultaneously...just be able to launch one or the other.
    If yes, where might instructions for such an installation be?
    Thanks a bunch.
    PS. I tried downloading a trial version of CS4 from Adobe website and could not get their "special" downloader to work. Tried Safari and Firefox. Is there some special trick?

    It is too easy.
    I can't make myself get rid of ID2 and IDCS, though I no longer use them (or IDCS2) for production.
    ID2 - IDCS - IDCS2 - IDCS4
    OSX 10.5.8
    MacPro

  • I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

    I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

    Hi Prabhuram and falez,
    This issue appears where there are any inconsistencies in your catalog (generally for video files). This issue may be due to offline files, missing files, video scenes. The recommendation here would be to fix these inconsistencies and try again. If that doesn't solve the issue, please follow steps mentioned in email by me.
    ~Surendra

  • I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

    I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

    Static_Unit
    I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
    Don't Have Serial Number for Premiere, Only Photoshop?
    Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
    In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
    I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
    The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
    Thanks.
    ATR

  • Cs2 and cs3 and cs4 on the same pc xp? could be a mess up?

    Hi
    i have some questions
    i bought cs2 some time ago , i guess 4 years but now i don't remember
    and i did installed on my pc ,  never had a problem
    after when cs3 come out , i tried the trial version , the first time i did  not like it , but after 2 weeks , i liked and i need it for camera raw
    i upgraded my cs2 license
    well the point i donwnload the trial version of cs4  (english version , because most of the tutorials are in english) while cs2 and cs3 are in my language
    i tried to make a custom install (i did not install all the comonent)
    something went wrong ,when i tried to uninstall cs4 , i don't know but cs4 did not uninstall all the components (the uninstaller keeps adobe color Na, Ja, Eu, color common setting and cmaps)
    i downloaded the cs4 cleaner for adobe page , but the adobe cleaner for cs4 was not able to clean these components, it tried to clean cs3
    well i  had to use windows installer clean up manually
    delete every thing that is related to cs4
    uninstall cs3 and re-install it
    so after this mess, i ask if i can keep cs2 cs3 and cs4 (i think i will buy or upgrade) in the same pc running xp?
    my second question
    2) after updating cs4 , run the cs4 update utility and update all the cs4 components , cs4 seems to be more fast then cs3 , still on old pc with a powerfull machine like a p4 3.6 with 2gb of ram  and a good graphic card pci express
    is my feeling ? is the cs4 more fast then cs3 on not fast pc , isn't it?
    thanks too much
    and have a nice day

    thanks John Joslin
    CS4 is faster than CS3 on a computer which supports it.
    which are the computer that supports it ? i run xp
    why did the uninstaller do a mess up ?
    thanks

  • CS3 Bridge and CS4 on the same machine.

    Hello Everyone,
    I have adobe photoshop CS3 and Illustrator CS4 on my machine.  Any known issues for running bridge CS3 and CS4 on the same machine?  Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering.  Thanks for you replies.

    Bridge is not really a stand alone product, and tuned to work with its current version of PS.  Also, Bridge CS4 has some features changed and/or added.  So if using CS3 Bridge you might have aspects that don't work with PS CS4.
    I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version.  But use them as a pair as intended.  Also, only have one Bridge running at a time.
    I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
    CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

  • Can I write photo captions in Elements 12 and upload the Photo to Revel, keeping the same Caption?

    Can I write photo captions in Elements 12 and upload the Photo to Revel, keeping the same Caption?

    Yes. Even if you edit Captions post uploading to Revel from Elements Organizer, the updated caption syncs to Revel.
    Thanks
    Andaleeb

  • I have elements 8 and I want to be able to load the same picture in multiple times because

    Question - I have photoshop elements 8 and I want to be able to load the same picture in multiple times because I have 1200 pictures already pregrouped into 60 file categories and some pictures are duplicated thruout these files. How can I get elements 8 to load the duplicates  - it currently seems to default to only loading the picture one time and not allowing duplicates

    The apple lightning to 30 pin works just fine for me.
    Works with a fio amp and srs  iwow.

  • I have a Mac with Elements 9 and 10 the plugins all work fine. I was told that when I install full version of 12 it will find prior versions and collect the info. Well it didn't and none of my plugins in the filters menu show. I did select the same direct

    I need all my filters that are working in version 10 Mac to show in version 12 Mac. I have selected the same folder I had selected in 10 but only a few plugins show. I need all plugins to show. The install should have found the older versions of Elements 9 and 10 and setup properly, but the installer didn't do it.

    Also, no plugins transfer automatically from one version to the next. You must reinstall them, ditto for any third-party additions like actions, layer styles, etc.
    The only thing that a new version of PSE should find automatically would be your organizer catalog and photos.

  • I use "element 12" and want  like in the old PS version due Automating and Contact  II upload multiple filesand print them with any columns and rows on the same page . How does it work?

    I use "element 12" and want  like in the old PS version due Automating and Contact  II upload multiple filesand print them with any columns and rows on the same page . How does it work?

    Can you supply a link?

  • Can Elements 4 and Elements 10 be installed on the same PC?

    can elements 4 and elements 10 be installed on the same PC?
    Message title was edited by: Brett N

    lexie35 wrote:
    Thank you.
    Question:  The PC I have runs XP and there is only 502 KB of RAM.  E 4 runs OK but the E 10 says at least 1 GB of RAM.  Should I be concerned about lack of RAM?
    David
    I very much doubt you can use PSE10 with 502 kB of RAM.

  • How to read the configuration for SAP GUI elements in Plant Maintenance module from SPRO and leverage the same in NWBC for HTML.

    Dear Members,
    Greetings for the day!
    I am working on NWBC for HTML in Plant Maintenance module.
    We have configured some changes in SPRO for customizing the UI elements( like visibility, mandatory ) like tabs and fields in transactions like IW21( Create Notification).
    As of now separate parallel configuration needs to be carried out in NWBC for HTML in PM module to achieve the same UI features for creating notifications and this is time consuming.
    Is there any way to read the configuration done in SPRO for the SAP GUI's and leverage the same in NWBC for HTML.
    Appreciate your time in responding to this.
    Thanks & Regards,
    Ram.

    >
    <IfModule mod_weblogic.c>
    WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
    MatchExpression /app1
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
    DebugConfigInfo ON
    PathTrim /weblogic
    </Location>
    <IfModule mod_weblogic.c>
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    MatchExpression /app2
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    DebugConfigInfo ON
    PathTrim /weblogic
    </Location>
    >
    This configuration is weird little bit. There is MatchExpression /app1 and MatchExpression /app2 and at the same time two <Location /weblogic> sections. Are you sure you understand what that configuration stands for?
    Try something like this ...
    <Location /app1>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
    DebugConfigInfo ON
    </Location>
    <Location /app2>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    DebugConfigInfo ON
    </Location>
    where /app1 and /app2 are contexts of your weblogic applications.
    http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html
    http://httpd.apache.org/docs/2.0/mod/core.html#location

  • Same clip, different lengths in CS3 and CS4?

    I'm trying to fix a problem I'm having importing my CS3 project into CS4 and I noticed that the clip lengths in the properties windows do not match for my files. For example, if I open my clip in CS3 (where it was originally edited) it shows it this:
    File Path: F:TapesTape 24Scene 018 - Ally & Paul Coffee (9).m2t
    Type: MPEG Movie
    File Size: 365.4 MB
    Image Size: 1440 x 1080
    Pixel Depth: 1440
    Frame Rate: 29.97
    Source Audio Format: 48000 Hz - compressed - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00;01;54;14
    Average Data Rate: 3.2 MB / second
    Pixel Aspect Ratio: 1.333
    But in CS4 the properties show up as this:
    File Path: F:TapesTape 24Scene 018 - Ally & Paul Coffee (9).m2t
    Type: MPEG Movie
    File Size: 365.4 MB
    Image Size: 1440 x 1080
    Pixel Depth: 32
    Frame Rate: 29.97
    Source Audio Format: 48000 Hz - compressed - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00;01;53;08
    Average Data Rate: 3.2 MB / second
    Pixel Aspect Ratio: 1.3333
    What would cause this discrepancy? I shot at 30f on a Canon XH-A1. My project settings in CS4 are HDV 1080p30. Do I have the wrong settings? How could the same clip be of two different lengths. I'm so confused!
    Please respond only if you have a suggestion. I am not looking for comments about how I shouldn't switch programs midstream. I would like some honest help, however!
    Thanks!

    I've got a couple suggestions.
    First would be to see if its a problem with the import or a just a difference in how CS3 and CS4 reads the files. If you import one of .m2t files directly into CS4 and not through importing the project, does it give you the same info as you listed above? (I'm assuming the file info above was derived from importing the project and then looking at the file's info.) If it is correct when independently brought into premiere, then the problem lies with importing a CS3 project and I would suggest trying to unlink then link your media. If there is no difference, then it's something else.
    Second suggestion is to export an EDL out of CS3. Then, instead of importing your CS3 project into CS4, import the EDL and see if this resolves your edit points.
    One note I've noticed with the EDL's in premiere, they don't import well when generated in framecount mode, but work fine in timecode mode (in CS3 this is just what your timeline time indicator mode is set at, right click the time indicator and set it to Timecode. in CS4 this doesn't work and you have to set the Display Format to Timecode under your Project Settings.)
    Good luck.

  • Have ordered Photoshop Elements 12 and Premiere Elements 12 (for MAC, EN version). Order went through but finally order was cancelled as Adobe Store was unable to approve. Subsequently order was cancelled. did anybody experience the same issue and how to

    Have ordered Photoshop Elements 12 and Premiere Elements 12 (for MAC, EN version). Order went through but finally order was cancelled as Adobe Store was unable to approve. Subsequently order was cancelled. did anybody experience the same issue and how to proceed.

    Hi there
    Please check with your credit card issuer to see why payment is not being approved.  When this is resolved you should be able to place a new order.
    Thanks
    Bev

Maybe you are looking for

  • How do you upgrade Pages 2.0.2 to Pages 5

    I purchased my laptop one year ago and have been using Pages 2.0.2 for a brochure project.  When I go to export the 8pg file to an PDG the margins are all off on the outside edges.... so I updated my system software so I could then update to Pages 5

  • Add Invoice from Purchase Order

    Hi experts, I add the Button in Purchase order .and bind the Vendor codes and items, qty, price in matrix(Purchase order matrix) . Now i want to add the Invoice separately  for all vendors who are exist in row level when i click the userdefined butto

  • I want to save everything I need for a project

    I was just looking at an old project I had. I started checking some of the support media files. For example, I have 3 .aif files that I use for the sound track. I clicked on them and reveled them in Finder. To my surprise, they are in my iTunes music

  • Launch JNLP file which required full-qualified domain name

    Hi all, My suitation is like this: I need to launch an JNLP file which I need a domain name in order to access it: (using JDK 1.5.0_11) e.g. http://hostname.domain.domain/xxx/yyy/zzz.jnlp But when it try to access one of the jar file, it will refer t

  • IPhone contacts list somehow replaced by iPad contacts list

    I bought an iPad for my wife.  Put in her old email address and from that added email addresses to her "contacts".  I turned on my iPhone and found my "contacts" had been replaced by hers.  Very weird.  I need to know how it happened, how to avoid it