Elements-6 and printing negatives
I have scanned some black & white negatives but I cannot find out how to print these. Can anyone tell me how I convert to positives?
Richard
Barbara,
I did not expect a response from the fount of all knowledge....thank you so much. Problem solved.
I searched your book for the answer but could not find a mention. There is so much information that perhaps I missed it. I don't suppose you can guide me to a reference if it is there?
Richard
Similar Messages
-
Help with Elements 12 and Print Studio
i have Elements 12 and cant get print studio supplied with my canon pixma pro 100 to install
can any one help ??You messaged me (but please reply to the forum as it will help others with the same problem):
"print studio just keeps saying its not compatible with elements 12 or vice versa??".
Go to Canon's web site and download the latest verson and see if that works. It installed for me OK (not that it worked, as I don't have a compatible printer).
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
Photoshop elements 13 and canon protoprinter pro driver
I installed elements 13 to my computer and my automation tools such as canon photoprinter pro printer are no longer visible. Yje driver still exsists for my photoshop elements 12 and prints without a problem. I reinstalled the canon drivers without and chnage to photoshop elements 13.
There must be an issue with elements 13.1. Any ideas?sillysully511 wrote:
Thank you. Right now I have Elements 11 and wanted to make sure if I purchased 13 it would work and I guess it does
You can always download the trial version before paying for it. Use it for 30 days and then buy the boxed version to activate your trial product. You only need to insert the serial number to activate the trial version if you decide to buy the boxed version. -
Printing with HP B9180 and Photoshop Elements 8 and Color Management
I've got a bit of confusion about certain settings in the printing process and I've posted a rather long discussion of my 'issues' and confusion. I hope someone can give me some guidance here. I've seen a lot of these issues addressed in many places but I can't seem to find an integrated response. Thanks to anyone who takes the time to read and respond.
Color Management Questions
My problems started when I was getting pictures that were too dark from my HP 9180 printer after having gotten very nice prints for a long time. I had obviously started to do something differently inadvertently. The only thing I think that is different is that I got a new 23 inch monitor, which does produce much brighter on-screen images. So, I started to do some research and know just enough about color management to be slightly confused and have some questions that I hope someone can give me some help with.
Equipment Background
I use both a Canon 20D and a Canon PowerShot SD600 camera. Both have the default color space as sRGB, although the 20D can be also set as RGB.
I also use Photoshop Elements 8, where there are a variety of settings possible for printing.
My monitor is an HP S2331, whose color space is sRGB and cannot be reset to RGB (I think) except for temperature; the default is 6500K.
My printer is an HP Photosmart Pro B9180 Printer, where there are also a variety of settings possible.
I’m running XP-Pro.
Here’s Where I Get Confused
Everything I have read about color management (various web sites, forums, books, etc) says to have the image, monitor, and printer all in the same color space.
Everything I read about PSE 8 (same sources) says to set PSE 8 to ‘Always Optimize for Printing’ under Edit>Color Settings in order to get the best prints. This displays photos based on the Adobe RGB color space.
I am taking pictures in sRGB, and telling PSE 8 to process them in RGB by selecting ‘Always Optimize for Printing’. Is this something I should be concerned about? Should I reset my camera for RGB?
Further, by selecting ‘Always Optimize for Printing’, I am setting PSE 8 for RGB while my monitor displays sRGB. Is this an important issue or is it also much ado about technicalities that an amateur should not worry about? It does violate the ‘keep them in the same color space’ rule.
Next, when I go to File>Print and get the Print window and then do the Page Setup and Select Printer, I then go to More Options in the lower left of the window. Under the More Options window, I select Color management and select Photoshop Elements Manages Colors. Next, there is Image Space, which is fixed and not subject to selection from a drop down menu.
I understand that this is the image space of the image I took with my camera and that information is embedded in the image. Correct?
Next, there is Printer Profile. But, from what I have read, this is where the IEC profile of the paper being printed on is supposed to be selected, isn’t it?
Shouldn’t this more appropriately be called Paper Profile, or Printing Media Profile? Further, this drop down menu appears to be somewhat erratic, sometimes showing all of the paper profiles I believe are loaded, sometimes not. It also shows listings such as Working RGB-Adobe RGB (1988), Adobe RGB 1988, Dot Gain 10%, 15%.... along with a lot of paper profiles. Aren’t those profiles unnecessary here?
I’ve used both Relative Colorimetric and Perceptual Rendering and am happy with either one.
Next, when I go to Printer Preferences, in order to “…disable color management in the printer preferences dialog”, under the Color Tab, I select Application Managed Colors from the Color management drop down menu, and also have the option of selecting ColorSmart/sRGB and Adobe RGB (1988).
Is there any time when I should use either ColorSmart/sRGB or Adobe RGB (1988)? If I were staying with my camera’s sRGB setting, given the fact that the monitor is sRGB, would the appropriate selections be ‘Printer Manages Colors’ and ‘ColorSmart/sRGB’?
Finally, under the Features Tab, I go to look for the same paper I selected under Printer Profile (Question 4 above). If it is one of the pre-loaded (by HP) profiles, it is there, but if it is a profile I downloaded, say for an Ilford paper, it isn’t listed, and I need to guess at an equivalent type of paper to select.
Is there any way to get that listing to appear under the Paper Type drop down menu?
I know that this is a long post, but it helped me to clarify my ‘issues’. Thank you for any and all suggestions, answers, guidance and help.RIK,
Some printers have long names, esp. HP printers, and PSE gets ":confused." In control panel>devices and printers, right click on the default printer, go to printer properties, and rename the default printer to something short, e.g. "Our Printer." That may fix it.. -
I have scanned some black and white negatives into my computer(iMac) where they are stored on the hard disc as positives.When I import them into iPhoto to print they turn back into negatives.How do I turn them back into positives?
That's because you scanned them as B/W photos and iPhoto 08 doesn't support the grayscale color profile. You can either rescan them as color photos or export them as originals out of iPhoto to a folder on the desktop and applhy this Automator application, Convert to JPG and Embed sRGB Profile, on them and then remimport into iPhoto. You can download it from Toad's Cellar . Be sure to read the warning on the website about not applying it on your only copies.
OT -
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
Thanks,
Shirsbmgrams wrote:
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
See here:
Reading PhotoDeluxe PDD Files -
Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new elements I cannot find it.
markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR -
Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?
In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.
-
I use "element 12" and want like in the old PS version due Automating and Contact II upload multiple filesand print them with any columns and rows on the same page . How does it work?
Can you supply a link?
-
Hello, I would like to create and print a contact sheet in Photoshop Premier Elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new Premiere Elements I cannot find it.
markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR -
Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
Seeking help with PS Elements 11 which does not work with Epson r2000 printer. Epson tech support could not fix, said it is PS e11 problem. Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct. Have set PS to manage color and printer manages color to off. Would appreciate any suggestions. Thank you.
Hi,
Sincerely appreciate your help. Running Windows 7 on a Dell XPS420. System has been very stable for years. Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems. The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints.
Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
Will let you know how things go.
Richard
Date: Thu, 12 Sep 2013 19:47:38 -0700
From: [email protected]
To: [email protected]
Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
created by Barbara B. in Photoshop Elements - View the full discussion
What operating system are you using?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Help please my photos that I had been viewing printing etc are not compatible when I print in elements 13. I have unistalled elements 11 but still hve the same problem
When I try to print using elements 13 up pops The saved print information is in an incompatible version. it has been set to default values.
I have templates that I had designed in elements 11 to drop photographs into, every time I try to print up pops the notice above and it will not print.
If I have imported the photograph and worked on it in elements 13 it prints fine.
I have hundreds of photographs that I have changed from raw files to Jpegs etc. which printed fine. Now with elements 13 I cannot print any of them.
Help please, I was born BC before computers
Original message----
From : [email protected]
Date : 29/01/2015 - 19:51 (GMTST)
To : [email protected]
Subject : I have upgraded to elements 13 and unistalled 11 photos corrected in 11 are not compatible to print with 13
I have upgraded to elements 13 and unistalled 11 photos corrected in 11 are not compatible to print with 13
created by Barbara B. in Photoshop Elements - View the full discussion
What do you mean by "not compatible"? What happens, exactly, when you try to print?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7144769#7144769 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7144769#7144769
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Photoshop Elements 10 and Epson xp-810 Printer
I just purchased an Epson XP-810 printer. I can print from Photoshop Elements 10 just fime. I need to know how to set the printer up so I can import from its scanner.
Can anyone help me with this?Thanks!
Date: Mon, 25 Nov 2013 20:14:45 -0800
From: [email protected]
To: [email protected]
Subject: Photoshop Elements 10 and Epson xp-810 Printer
Re: Photoshop Elements 10 and Epson xp-810 Printer
created by Barbara B. in Photoshop Elements - View the full discussion
In PSE you need to install the TWAIN driver:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop -elements-11.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5874804#5874804
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5874804#5874804
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5874804#5874804. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.
I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence? -
Any idea why I can't print using Photoshop Elements 13 and an HP Color Laser Jet printer?
Windows 7 with Photoshop Elements 13 - Recently purchased Elements 13 and haven't been able to print! I have an HP Color Laser Jet CMI1312nfi MFP and printed fine last year with a trial version of Elements 12. I keep getting errors saying "the saved print information is an incompatible version. It has been set to default values" as well as "default printer could not be opened." I downloaded an update to the driver for the printer today but still no luck. Any other ideas?
I ended up reinstalling the drivers for the Canon from the original CD and that took care of it. Normally I can just copy the PPDs for our particular printers to the PPD folder in the Library/Printers/PPDs folder and it works fine, but for some reason this machine decided it needed everything reinstalled. It's working now.
Maybe you are looking for
-
Why are some of the loops in GB 'greyed
Why are some of the loops in GB 'greyed out' " I'm specifically interested in 'slide guitar' for example and cant find a reason why there's no access. My iMAC was bought in April 2010??
-
my printer is connected to the wifi network the same one as my computer when i get the ip and enter it in the searchbar the hp page opens when i press the hp web service tab it opens nand the word enable is written when i press it it says connecting
-
Bug 585844 JDBC Thin and Char Fields
I would like to see this bug fixed because the workaround that I have been using for the past two years is a cluge. I could buy the reasoning listed in the bug database at to why why this bug exists, and why it hasn't been fixed, except that it doesn
-
Hi all can anyone send docs for Report Designer bi7.0
hi all, Can anyone send me the documents for report designer bi 7.0. regds hari
-
Itunes on Vaio Windows 7 won't open at installation
Hi I've just tried to inastall itunes on my Vaio for the first time - I've downloaded the 64-bit version - but I can't open it. Each time, I only get as far as accepting the licensing agreement, and then the opening falters and nothing happens. Does