Elements 7.0 Editor "Non-Responsive"

I was printing an item in Editor and the program locked up. I checked the Task Manager and found Editor in a "Non-Responsive" state. I ended the program with "End Now" and I got an error window to send to Mircosoft. The following "Error signature" was shown
szAppName:PhotoshopElementsEditor.exe szAppVer:7.0.0.0
szModName:hungapp szmodver:0.0.0.0 offset 00000000
When I went into the Tech Info and checked the Error Report Contents, I got this
C:\DOCUME~1\Owner\LOCALS~1\Temp\WER1c13.dir00\PhotoshopElements.exe.mdmp
C:\DOCUME~1\Owner\LOCALS~1\Temp\WER1c13.dir00\appcompat.txt
Every time I try and print from Editor the program locks up and get the same message. I have uninstalled this program several times with no luck. I can print out of Organizer, but not Editor. Also the computer that has this problem is not or ever been connected to the internet. Editor program still works fine, but just won't print.

Unfortunately, there are many reasons why the PSE Editor might crash, and often it is hard to diagnose quickly the reason for the crash. Here are some steps you can take to try to fix the problem:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes

Similar Messages

Non responsive Flash Player

How do I resolve a non responsive Flash Player plug in? Message received is Flash Player is not responding, do you want to continue or close?" At different times, have selected continue, close or just wait a minute and the message goes away. Sometimes the computer will freeze. Using current version of Firefox and the 16.0 Flash Player. Have restarted Firefox, reinstalled Flash Player, checked our router/modem. The message shows up constantly.
Thanks in advance for your help!

1. Download the following files (Right click and "Save Link as"):
Shockwave Player Uninstaller
Flash Player Uninstaller
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Shockwave Player 12 FULL Installer (Other browsers)
You'll need to use this link (Shockwave Player 12 ActiveX FULL Installer) WITH IE to install the ActiveX Shockwave FULL Installer. There isn't a direct download link available. Save the FULL installer if ti allows you. If not you'll HAVE TO revisit the link to install it after step 9 below.
2. Reboot.
3. Run the Uninstallers from your Downloads folder, to remove BOTH Flash Player and Shockwave.
4. Go to: C/Windows/System32 and delete the Macromed folder.
5. Go to: C/Windows/SysWOW64 and delete the Macromed folder.
6. Open your Windows Registry Editor (Start>Run or press the Windows key+r. Type "regedit" [minus the quotes] and click OK.
7. In the Registry Editor, go to: HKEY_LOCAL_MACHINE/SOFTWARE and delete the Macromedia folder.
8. Go to: HKEY_CURRENT_USER/Software and delete the Macromedia folder.
9. Close the Registry Editor and empty your Recycle bin.
10. Run the Shockwave FULL Installers first, and THEN the Flash Player Installers. These are offline installers and will require no connection during the process.
If problems persist, try disbaling other plugins and extensions, to determine if one or more is conflicting with Flash and Shockwave.

Non-responsive tech support

ATTENTION ADOBE TECH SUPPORT:
In early January, soon after I purchased Adobe Premiere Elements and Photoshop Elements 13, I posted on a user forum a question about a problem I am having using the Organizer People Recognition capability. That evening I received a reply from one of your support engineers, Anwesha Chaudhary ([email protected]), who promised to resolve my problem and exchanged a few emails with me. I would be glad to share that email chain with you. Note that in his Jan 12 email, he cc’d Harpreet Neelu [email protected] and Akshaya Saxena [email protected], who I assume are colleagues of his. Since the program was crashing, he requested a dump, which I sent him on Jan 12, and on that same date I received an email from him stating he had received the dump files and that they would work to resolve the problem and ‘will soon get back to [me] with the resolution’. I have not heard from him since despite twice sending him emails asking for an update. Can you help?

Bob
Thanks for your follow up. Do not give up.
Let us explore the following, non ideal but just might work...
1. Click on the following link to Adobe Chat
Contact Customer Care
Premiere Elements
Adobe ID, Signing In
Adobe ID, Sign In, Account Help
Chat Panel
If the link does not hold its sets, then you will need to navigate to the Chat Panel using the above titles as guides.
The hope is that the Chat Panel representative will be able to help you contact the Adobe person and/or department you need.
Online I have seen 1-800-833-6687 listed as Adobe Customer Service. I do not know if that is a viable choice, but worthwhile exploring it.
Other than Ask the Community, the Premiere Elements contact opportunities are far less than for the Premiere Pro and the like programs.
2. The path that is more ideal would be to post in the Adobe Photoshop Elements Forum and try to attract the attention
of Barbara Brundage who is an expert in Photoshop Elements (both its Editor and Elements Organizer). She should be
able to help you or suggest contact route to an Adobe team who will give you a now answer.
ATR

Photoshop Elements 12 photo editor crashes directly when application launched. Get no error/message.

Photoshop Elements 12 photo editor crashes directly when application launched.
Get no error/message.
My System: Windows 8.1
All drivers are up-to-date.
Please can someone help me?

Hi rens,
Was it working fine before?
Have you tried updating PSE12 to the latest update and checked?
Standard troubleshooting steps :
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Try launching now and check.
Regards,
Rave

When playing games on my iPod touch. Some are stutters and non responsive

Trying to play games on my iPod touch and they are slow, stuttery and non responsive. iPod software is up to date

Do the games require an internet connection? If so then maybe slow connection.
otherwise:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Firefox 13 is unusable hanging/non-responsive. I've downgraded flash, uninstalled plugins & un/reinstalled Firefox but I can't use it to try other possibl fixes

Since updating to Firefox 13 it not only runs slow but hangs and becomes non-responsive on all different websites. I was told that the most recent Flash update was known to be incompatible with Ffx 13, so down-dated Flash and uninstalled non-essential plugins - which definitely helped, but has not fixed the problem.
I haven't even been able to try the other potential fixes I've found on the Support site (adding into my computer's safe settings in case of firewall issue or creating a new profile) because Firefox won't work long enough for me to access them. At this point, shouldn't I just down-date to the last version of Firefox??

All of a sudden firefox has become unstable - its hanging on the NYTIMEs website. I've done done everything - uninstalled, reinstalled, removed all add-ons, used default themes, reset firefox. Some serious problem here - I had to switch back to IE9. (Version 16.0.1 Firefox running under Windows 7)
Oh by the way, I'm having the same problem on different computers all of which are running the latest firefox under Windows 7

Now that I was sent by Microsoft to your download update site to get the latest version 4.0.1, Firefox crashes (becomes non-responsive) before opening any site page I try. When will you fix this problem?

For two weeks I have tried to use your automatic download of the latest version 4.0.1. It would sit there telling me it is trying to connect to the download computer for hours, several times overnight. Then, it became non-responsive and error messages were sent to Microsoft who directed me to your download site. After downloading your latest version several times, the new page would open. After selecting a bookmarked site, it would open (sometimes only partially) but when I tried to scroll down, it would freeze up and become non-responsive, again prompting error messages to Microsoft. They must be getting a kick out of this. I'm running a Gateway 7200S desktop with Microsoft XP and Intel single range Pentium 4 processor. I have been using your Mozilla Firefox as my default browser for several years with much satisfaction. Unfortunately, whatever upgrades were made have rendered it useless for me.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

What are you considering non responsive with the plugins? Flash player is working just fine then I get your crash page in the middle of doing something. You say it only crashes when it's been unresponsive for 45 seconds. Mine is crashing in less then 1

I have had problems with firefox crashing for the last three month. I have updated to the latest version with the crash protection. Now the flash player crashes about every 20 minutes or so. On your blog page you state that I will get the crash page when the plugin has been non-responsive for 45 seconds well with mine the games are going along just fine then wham crash page. Flash player was responding and you gave me crash report anyway. What's up???? Flash player is crashing within seconds not 45 seconds!!!!!!!!!!!!!!!!! Your check plugin page always states that my plugins are UP TO DATE!!!!!
== This happened ==
Every time Firefox opened
== three months ago and getting worse with every upgrade you send!!!!!!!!!!!!!!!!!!!!!!!

'''''"I have had problems with firefox crashing for the last three month."'''''
You need to investigate the cause of your crashes that started prior to the release of the first Firefox version that offered crash protection, version 3.6.4, released in mid to late June 2010; that is just over one month ago.
<u>'''The crash protection feature does not prevent a plugin from crashing, it prevents the whole Firefox browser from crashing because of a crashing plugin; only the tab with the crashing plugin crashes.'''</u>
For information about report plugin crashes see: http://support.mozilla.com/en-US/kb/Plugin+crash+reports
You need to post the crash Report IDs for the crashes occurring over the last 3 months. To do so, type '''about:crashes''' in the URL/location/address bar, then copy and paste the Report IDs (only) into your reply. See: http://support.mozilla.com/en-US/kb/Firefox+crashes#Getting_help_with_your_crash
In addition, please do the following. Type '''about:support''' in the URL/location/address bar, on the screen presented, click "Copy all to Clipboard" and paste that into your reply.

Safari (7.0.1) is non-responsive (spinning pinwheel) upon start up. It will work in temp user account but not in my main user acct. I tried reinstall via comman-r prompt on start up but the problem persists. Any suggestion for reinstall or repair?

Safari is non-responsive after intitial start up. Before it can load the homepage (google), it will hang and give a perpetual pinwheel until I force quit the program. Safari works in temporary user account but not in my primary user account. I have reinstalled osx via the command-r upon start up and the problem still persists. Any suggestions on how to reinstall or repair safari?

Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
So the mystery continues, but these additional facts will help with the diagnosis, I hope.
Thanks again for your suggestion.
Gordon

Can the Genius Bar cable to my iPhone 5S to enter my passcode on a broken, non-responsive touch screen? I need to back up the 5S before replacing it under AppleCare

Can the Genius Bar cable my 5S to their computer or separate keyboard to enter my passcode on a broken, non-responsive touchscreen? I need to get past the passcode to either transfer my data and pics to a new 5S or my PC computer (that the 5S has never been synced with.

Are you serious... only bluetooth keyboards? Even if the keyboard has the lightning connector? This supposedly works on the iPhone: http://store.griffintechnology.com/wired-keyboard-for-ios-devices
as well as this: http://www.att.com/accessories/specialty-items/logitech-apple-30-pin-wired-keybo ard.html

Was updating my touch this morning when an error message occured, itunes became non responsive and was shut down. My touch is locked in the itunes update mode and my computer no longer recognizes the touch. How do I correct?

During update, error occured and Itunes became non-responsive and shut down. My Itouch is now locked in the itunes update screen and is no longer identified by my computer. How do I fix this problem?

Try this:
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPhone to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPhone in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I have an ipod nano 2nd generation with a non responsive click wheel

I have an ipod nano 2nd generation with a non responsive click wheel. I have fully charged it tried resetting it and on two different computers with the latest iTunes I have restored it with the latest firmware then moved it to hold and off hold held in the menue button and select button for 10 seconds but all I get is a screen where I select the language but cant get any response from the scroll wheel.
The hold button is working (I see the lock icon go on and off) I have done the restore procedure and then reset many times but no good I am wondering if I should open it up and disconnect the battery for 30 seconds.
I would appreciate any advice thanks in advance. (This is my Daughters ipod mine is an 8 gig one.)

You need a newer model iPod, a 4G or 5G. The 2G can only go to iOS 4.2.1

My Ipad 2 no longer displays anything.It may come on for a few seconds,but then half of the screen goes completely black, and the system becomes non responsive to all bottons. At other times all four sides of the display becomes black, about 1/4 inch.

Can anyone help me on this one? I got my IPAD 2 in June 2011. It never gave problems until a few days ago. It began to "hang", becoming non-responsive to all buttons. Then just yesterday morning, it went totally black. The display no longer displays. The Battery was charged 96%. I tried the power adapter, but had the same result. I tried the resetting, holding the two buttons for 10 seconds or more but no result. I have already restored it to the factory setting,(via my PC) and put back my apps etc. But after all this I still cannot see anything on the screen.
I know it is still working, because from time to timer I hear the message alerts, and other sounds.
Waht is the likely solution?

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

I tried to set up a remote desktop between my macmini and my work computer. I hit cancel and now the Remote Desktop will not close. I cannot shut down my computer either. How do you close a non-responsive application. I have tried everything!

I tried to set up a remote desktop connection between my MacMini and my work computer. It was not working so I hit cancel, but then the big black screen of death came up and will not go a way. I cannot close my computer nor quit the remote desktop connection. How do you close a non-responsive application? By the way, I am new to Mac and it is not as simple as hitting the Control, Alt, Delete. Please help.

virginiafromphoenix wrote:
.......How do you close a non-responsive application?.......
Try ( alt + cmd + esc ). Gives you a menu of running applications, and a chance to "Force Quit".

IPhoto 11 and PS Elements 10 - external editor issue

My Imac has been upgraded to Mountain Lion, iPhoto 11 and PS Elements 10. Now right-clicking shots in iPhoto browser brings up external editor choice and will then open PSE 10, but not the shot ( I have to drag shot to desktop, open with PSE10, save, import back to iPhoto - a huge step backwards). Same software ( iPhoto 11 and PSE10) works fine, albeit slowly) on my Macbook Pro running Lion. Please help?

You're selecting the wrong item as the editor in the Adobe PSE folder. It's fooled a lot of us in the past. This is the file you want to select as the external editor:
I may be preaching to the choir here but maybe the following will enlighten a bit on using PSE as the external editor:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note 1: screenshots are from PSE 10
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
My apologies if you've already seen the above.
OT

Elements 7.0 Editor "Non-Responsive"

Similar Messages

Maybe you are looking for