Elements 7 Border problems!
Hi, I am new here! I am at my wit's end and have decided to join this forum, hoping to get an answer.
I use Elements 7. Whenever I try to add a simple border to a picture, it ends up looking beveled and gradiated (or maybe feathered?). It is darkest at the outside, then fades to a lighter color inside.
To get a border around a picture, I simply select the picture, go to Select --> Modify --> Border and choose the pixel width I want. Then, I go to
Edit --> Fill Selection and select Normal with 100% Opacity.
Still, I get this horrible beveled border that I do not want. This is what it looks like:
I have been able to get a normal border in the past, but one day it started doing this automatically. I have even uninstalled and reinstalled the program hoping it would fix it, but to no avail.
What am I doing wrong? HELP!
Thanks in advance,
Jenna
Jenna,
Try this:
Open picture
Go to Select>all
Open a new, blank layer at the top of the layers palette
Go to Edit>Sroke outline selection. Select color, place it inside, select width
If you don't like the stroke, delete the layer created in step #3, and start over. You can also reduce the opacity of the layer with the stroke if you wish.
Similar Messages
-
Image border problem using JAI
I've written some very simple code to scale an image down to a small
thumbnail in JPG format but the quality is quite horrible. Is there a way of making it look nicer?
src = JAI.create("fileload","filepath")
ParameterBlock params = new ParameterBlock();
params.addSource(src);
params.add(xScale);//x scale factor
params.add(yScale);//y scale factor
params.add(0.0F);//x translate
params.add(0.0F);//y translate
params.add(Interpolation.getInstance(Interpolation.INTERP_NEAREST));
dest = JAI.create("scale", params,null);
I switched to InterpolationBicubic, instead of Interpolationnearest the quality was much better but the resulting image contained borders.
could some one tell me is there any other way to get better and nicer results.Yes you can fix the border problem by setting a render hint to change the way the borders are handled. Something like the following will do the trick.
You can also use BORDER_WRAP instead of BORDER_COPY, both seem to have a similar result. Mind you I am still very dissapointed with the quality of the bicubic resampling in JAI, but at least this will fix the problem with the borders.
RenderingHints rh = new RenderingHints(JAI.KEY_BORDER_EXTENDER, BorderExtender.createInstance(BorderExtender.BORDER_COPY));
dest = JAI.create("scale", params,rh); -
habe unter "Anzeigen" die Taste:
Fotos nebeneinander anzeigen und vergleichen - gedrückt und kann diese Funktion nicht mehr rückgänig machen. Es werden bei mir jetzt statt bisher
18 000 Bilder weit mehr als doppelt so viele angezeigt - stört mich sehr !!!!
bitte helfen Sie mir !
D a n k e !!!Thema
Photoshop Elements 6 Problem
Ingrid237 - 07:34am Jun 10, 2008 Pacific
habe unter "Anzeigen" die Taste:
Fotos nebeneinander anzeigen und vergleichen - gedrückt und kann diese Funktion nicht mehr rückgänig machen. Es werden bei mir jetzt statt bisher
18 000 Bilder weit mehr als doppelt so viele angezeigt - stört mich sehr !!!!
bitte helfen Sie mir !
D a n k e !!! -
Hoping someone can help with a pesky border problem. I'm
working on a Mac and have no problem creating a thin, off-white
border (2 pixels) around an image and everything seems fine. But
after posting, the border acts like a rollover and changes colour
as if it was a link, which it isn't, and I don't want it to change.
Even worse, the border shows purple or blue on a PC.
Thanks much.Sorry forgot the link:
http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
"Miguel" <[email protected]> escribió en el
mensaje de noticias
news:g7rlj6$qct$[email protected]..
> Hi again.
>
> Only one advice. Don´t use fonts which can´t
be seen for everybody but
> those which have that particular font installed in their
systems.
>
> In this link you can see the common fonts of windows and
Mac.
>
> "Miguel" <[email protected]> escribió en el
mensaje de noticias
> news:g7rl6u$q4f$[email protected]..
>> Hi.
>> You could set a tag in your css.
>>
>> img {
>> border: 2px solid #FFFFFF;
>> }
>>
>> This will put a 2 pixels border with white color
around all images.
>> In the HOME page where the image have a grey border
you can change the
>> border color.
>> Also, have do you notice that in your home page you
have the color of
>> your paragraph in black, like the background? this
make impossible to
>> read it.
>>
>>
>> "markham5656" <[email protected]>
escribió en el mensaje de
>> noticias news:g7qg76$h5b$[email protected]..
>>> Hoping someone can help with a pesky border
problem. I'm working on a
>>> Mac and
>>> have no problem creating a thin, off-white
border (2 pixels) around an
>>> image
>>> and everything seems fine. But after posting,
the border acts like a
>>> rollover
>>> and changes colour as if it was a link, which it
isn't, and I don't want
>>> it to
>>> change. Even worse, the border shows purple or
blue on a PC.
>>> Thanks much.
>>>
>>
> -
I am running Windows 7. When I tried to access Photoshop Elements12 it looked as though it was starting to open, the icon was going round but then nothing. The same happened with Premiere Elements 12where it opened as far as the opening page but again when Organiser was selected the loading 'bar' rotated and then nothing else happened. I tried Adobe support who tried a variety of solutions including loading Application Manager and logging in under a new user name but that failed also. However I did manage to get a couple of error reports as follows:
Premiere Elements Organiser 12
Problem Event Name: APPCRASH
Application Name: PhotoshopElementsOrganizer.exe
Application Version: 12.0.0.0
Application Timestamp: 52251254
Fault Module Name: PhotoshopElementsOrganizer.exe
Fault Module Version: 12.0.0.0
Fault Module Timestamp: 52251254
Exception Code: c0000005
Exception Offset: 000956fd
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Photoshop Elements 12
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop Elements 12.0.exe
Application Version: 12.0.0.0
Application Timestamp: 52250ae1
Fault Module Name: Photoshop Elements 12.0.exe
Fault Module Version: 12.0.0.0
Fault Module Timestamp: 52250ae1
Exception Code: c0000005
Exception Offset: 00053a5b
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
If anyone can help I'd be very grateful as it is driving me up the wall!!Hi kalle-veikka,
If an organizer is not launching then try the steps mentioned in the given link :- https://forums.adobe.com/thread/1475087
If the issue is with editor then share the log file, locate the log path from given link :- http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0CDcQF jAC&url=http%3A%2F%2Fhelpx.ado…
Sarika -
computer notice comes up saying "Display driver has stopped responding but has been recovered............then the editor viewing frame freezes but sound keeps going.............then entire program stops.............once whole software deleted! PAID to have it retrieved! Now it reloads but i lose the new work. Frustrating..........................has worked ok for 2 years,although i would like to push the contrast/bright/light effects further..............
if anyone knows reasonably priced better edit software i would be interested! any thoughts?
thanks.thanks v much ............saw computer guy today and he sent me in the device manager direction but without all the detail u mention............I may forward your email to him..............
also there was a note from Dell to do a system check up which I did but then it said overall result-not supported/system tests not successfully completed...........says to shut down and try again but now I can't see where to activate test!(icon is gone)
also found an Adobe/elements 11 update device and that is currently being processed............
seems like we may be heading in a good direction...............
will have a closer read of your email.............
again.thanks...............
WEBSITE www.kimmilesfilms.com AND www.innersense.com.au/mif/miles.html
AND THE BLOG http//www.kimmilesfilms.blogspot.com/
Date: Mon, 3 Mar 2014 08:02:52 -0800
From: [email protected]
To: [email protected]
Subject: Re: elements 11 problem elements 11 problem
Re: elements 11 problem
created by A.T. Romano in Premiere Elements - View the full discussion
fixmyproblem
Thanks for the reply and the information that your Premiere Elements 11 is running on Windows 8 (presumed 64 bit) computer.
Because you come with a display issue, the first line of troubleshooting is targeted at the video card/graphics card that the computer uses.
This information can be found in the computer under the Device Manager/Display Adapters. And then you tell us what is listed under Display Adapters...you may find one or two names listed. Please report what you find.
In Windows 8, one way to Display Adapters listing
a. From the Metro App Screen, type Control Panel in the Search that appears to the right of the screen, and then click on Control Panel in list below.
b. In Control Panel, click on the header "Hardware and Sound"
c. Under Device and Printers, click on the Device Manager choice
d. In the Device Manager, open the Display Adapters category to find your video card/graphics card information.
There may be a keyboard shortcut to Control Panel (I know it is there in 8.1 64 bit)...Windows Key + X and selecting Control Panel from pop up at right of the screen. You can be in the Desktop App or in the Metro Screen when you do the Windows Key + X.
Once we know that, we will ask you to go to the web site of the manufacturer of the card and determine if you have the latest version of the card's driver installed.
If all this is going to be too much for you to handle, then it might be a good idea to consult with the people who installed your Premiere Elements 11 for you.
We will try to walk you through whatever we can.
Please let us know how you wish to proceed.
Thank you.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6174213#6174213
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: elements 11 problem
To unsubscribe from this thread, please visit the message page at Re: elements 11 problem. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Open project in premiere elements trial problem.
Unload the trial of photoshop and premiere elementens, the photoshop works correctly, but the premiere .. only the organizer works, when I try to open project or new project the program is closed automatic .....(window xp).gracias! (the proyect save correctly, buy not open after)
Thank you very much Bill, these is the information of the card, I believe that probably this one expired, your diras ... thank you again!
NVIDEA GeForce 8600 GP
Fabricante:.........................NVIDEA
Tipo de dispositivo:............Adaptadores de pantalla
Ubicacion:.........................Ranura PCI 16 (Bus PCI 1, dispositivo 0, función 0)
Version:...........................1.0.0.35
Proovedor del controlador:NVIDEA
Fecha del controlador:27-08-2007
Version del controlador:6.14.11.6230
Firmante digital:Microsoft Windows Hardware Compatibility Publ
Date: Thu, 9 Aug 2012 14:06:33 -0600
From: [email protected]
To: [email protected]
Subject: Open project in premiere elements trial problem.
Re: Open project in premiere elements trial problem.
created by Bill Hunt in Premiere Elements - View the full discussion
Can you tell us all about your computer, and especially your computer's graphics card/chip? What is its make/model? What is the version and date of the installed video driver? When PSE runs, but PrE does not, it is usually an issue with the video driver being obsolete. Good luck, Hunt
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4610620#4610620
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4610620#4610620. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.
High ATR,
Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
Grafikkarte: NVIDIA GeForce 8800 GT
If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
Project settings are the following:
General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
The video is a mixture of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
Thank you for your service.
thomasd
Von: A.T. Romano
Gesendet: Sonntag, 1. Februar 2015 23:55
An: Thomas Deschler
Betreff: Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13 , Problems with new text/titles
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822> -
Cannot resolve elements 11 problems so must restart. Also must un start program. How to start?
Cannot resolve elements 11 problems so must restart. Also must un start program. How to start?
Are these the tool option problems in your other discussion? If so what happened after Resetting the tools? If that didn't help, try selecting Edit> Preferences> General> Reset Preferences on Next Launch and restart PSE.
What do you mean by 'How to start'? Are you asking how to uninstall? If on Windows there will be an uninstaller in the Control Panel Add / Remove Programs section.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
HP 3000, Adobe Elements 9 border problems
Using a HP 3000 wireless printer w/ Windows 7 and Adobe Elements9 (trial version). I can't seem to get the image centered on the photo paper. Typically the image is located on the left side of the paper with about 1/2" of unused paper on the right side. Anybody have any ideas? Adobe says its traditionally a printer issue and no matter what I do in Adobe it doesn't correct the issue.
Jasper,
Welcome to the forum.
As Steve points out, MOV is but a "wrapper," and it is what's inside, that matters. The same holds true for AVI's, WMV's, and more. This ARTICLE goes into more detail.
When one begins a Project, at New Project, they need to know the details of their Source Files, and the Project's Preset, chosen at New Project, must match that Source Footage. That is why it is so important to know about that footage - so one can match to it. If you will tell us all about that footage, someone can help you make sure that your Project Preset matches, so that you do not have issues.
With playability issues, the first issue is the match between your Project Preset, and your Source Footage. Next comes one's system, so it might be a good idea to start gathering up the info there. This ARTICLE will give you some ideas on what infot would be so useful.
Good luck,
Hunt -
Drag AP Element Behavior Problem
I have a draggable ap element (calendardiv) on my page. To my knowledge it is set up correctly. I have created one of these before. For some reason now, when I preview the page in a browser...the ap div location shifts to the right side of the browser when I try to drag the element. As you can see I have a projector screen-type setup where all I want it to do is pull straight down centered in the page. What am I missing so that it stays in the middle rather shifting to the right side when I try to drag it? Code below (areas in bold)...
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Advanced Computers</title>
<style type="text/css">
<!--
body {
background-color: #333;
background-image: url(Images/chalkboardbg.png);
background-repeat: no-repeat;
background-position: center top;
font-family: Calibri;
#bannerdiv {
position:absolute;
left:50%;
top:0px;
width:400px;
height:200px;
z-index:1;
background-image: url(Images/banner.png);
margin-left: -500px;
#introimgdiv {
position:absolute;
left:50%;
top:0px;
width:600px;
height:100px;
z-index:1;
background-image: url(Images/introimg.png);
margin-left: -100px;
#paperdiv {
position:absolute;
left:50%;
top:100px;
width:300px;
height:400px;
z-index:1;
background-image: url(Images/paper.png);
margin-left: 200px;
#plannerdiv {
position:absolute;
left:50%;
top:130px;
width:245px;
height:330px;
z-index:3;
margin-left: 225px;
#tape1div {
position:absolute;
left:50%;
top:80px;
width:150px;
height:100px;
z-index:2;
background-image: url(Images/tape1.png);
margin-left: 150px;
#tape2div {
position:absolute;
left:50%;
top:80px;
width:150px;
height:100px;
z-index:2;
background-image: url(Images/tape2.png);
margin-left: 400px;
#calendardiv {
position:absolute;
left:50%;
top:-600px;
width:800px;
z-index:4;
margin-left: -400px;
height: 1050px;
text-align: center;
#calbtn {
height: 50px;
width: 100px;
visibility: hidden;
margin-left: 350px;
margin-right: 350px;
#googlecaldiv {
height: 598px;
width: 796px;
border-radius: 0px 0px 10px 10px;
-moz-border-radius: 0px 0px 10px 10px;
-webkit-border-radius: 0px 0px 10px 10px;
-khtml-border-radius: 0px 0px 10px 10px;
background-color: #FFF;
border-right-width: 2px;
border-bottom-width: 2px;
border-left-width: 2px;
border-right-style: solid;
border-bottom-style: solid;
border-left-style: solid;
border-right-color: #000;
border-bottom-color: #000;
border-left-color: #000;
-->
</style>
<script src="SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
<script src="SpryAssets/SpryEffects.js" type="text/javascript"></script>
<link href="SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
-->
</style>
<script type="text/javascript">
<!--
function MM_effectAppearFade(targetElement, duration, from, to, toggle)
Spry.Effect.DoFade(targetElement, {duration: duration, from: from, to: to, toggle: toggle});
function MM_scanStyles(obj, prop) { //v9.0
var inlineStyle = null; var ccProp = prop; var dash = ccProp.indexOf("-");
while (dash != -1){ccProp = ccProp.substring(0, dash) + ccProp.substring(dash+1,dash+2).toUpperCase() + ccProp.substring(dash+2); dash = ccProp.indexOf("-");}
inlineStyle = eval("obj.style." + ccProp);
if(inlineStyle) return inlineStyle;
var ss = document.styleSheets;
for (var x = 0; x < ss.length; x++) { var rules = ss[x].cssRules;
for (var y = 0; y < rules.length; y++) { var z = rules[y].style;
if(z[prop] && (rules[y].selectorText == '*[ID"' + obj.id + '"]' || rules[y].selectorText == '#' + obj.id)) {
return z[prop];
} } } return "";
function MM_getProp(obj, prop) { //v8.0
if (!obj) return ("");
if (prop == "L") return obj.offsetLeft;
else if (prop == "T") return obj.offsetTop;
else if (prop == "W") return obj.offsetWidth;
else if (prop == "H") return obj.offsetHeight;
else {
if (typeof(window.getComputedStyle) == "undefined") {
if (typeof(obj.currentStyle) == "undefined"){
if (prop == "P") return MM_scanStyles(obj,"position");
else if (prop == "Z") return MM_scanStyles(obj,"z-index");
else if (prop == "V") return MM_scanStyles(obj,"visibility");
} else {
if (prop == "P") return obj.currentStyle.position;
else if (prop == "Z") return obj.currentStyle.zIndex;
else if (prop == "V") return obj.currentStyle.visibility;
} else {
if (prop == "P") return window.getComputedStyle(obj,null).getPropertyValue("position");
else if (prop == "Z") return window.getComputedStyle(obj,null).getPropertyValue("z-index");
else if (prop == "V") return window.getComputedStyle(obj,null).getPropertyValue("visibility");
function MM_dragLayer(objId,x,hL,hT,hW,hH,toFront,dropBack,cU,cD,cL,cR,targL,targT,tol,dropJS,et,d ragJS) { //v9.01
//Copyright 2005-2006 Adobe Macromedia Software LLC and its licensors. All rights reserved.
var i,j,aLayer,retVal,curDrag=null,curLeft,curTop,IE=document.all;
var NS=(!IE&&document.getElementById); if (!IE && !NS) return false;
retVal = true; if(IE && event) event.returnValue = true;
if (MM_dragLayer.arguments.length > 1) {
curDrag = document.getElementById(objId); if (!curDrag) return false;
if (!document.allLayers) { document.allLayers = new Array();
with (document){ if (NS) { var spns = getElementsByTagName("span"); var all = getElementsByTagName("div");
for (i=0;i<spns.length;i++) if (MM_getProp(spns[i],'P')) allLayers[allLayers.length]=spns[i];}
for (i=0;i<all.length;i++) {
if (MM_getProp(all[i],'P')) allLayers[allLayers.length]=all[i];
curDrag.MM_dragOk=true; curDrag.MM_targL=targL; curDrag.MM_targT=targT;
curDrag.MM_tol=Math.pow(tol,2); curDrag.MM_hLeft=hL; curDrag.MM_hTop=hT;
curDrag.MM_hWidth=hW; curDrag.MM_hHeight=hH; curDrag.MM_toFront=toFront;
curDrag.MM_dropBack=dropBack; curDrag.MM_dropJS=dropJS;
curDrag.MM_everyTime=et; curDrag.MM_dragJS=dragJS;
curDrag.MM_oldZ = MM_getProp(curDrag,'Z');
curLeft = MM_getProp(curDrag,'L');
if (String(curLeft)=="NaN") curLeft=0; curDrag.MM_startL = curLeft;
curTop = MM_getProp(curDrag,'T');
if (String(curTop)=="NaN") curTop=0; curDrag.MM_startT = curTop;
curDrag.MM_bL=(cL<0)?null:curLeft-cL; curDrag.MM_bT=(cU<0)?null:curTop-cU;
curDrag.MM_bR=(cR<0)?null:curLeft+cR; curDrag.MM_bB=(cD<0)?null:curTop+cD;
curDrag.MM_LEFTRIGHT=0; curDrag.MM_UPDOWN=0; curDrag.MM_SNAPPED=false; //use in your JS!
document.onmousedown = MM_dragLayer; document.onmouseup = MM_dragLayer;
if (NS) document.captureEvents(Event.MOUSEDOWN|Event.MOUSEUP);
} else {
var theEvent = ((NS)?objId.type:event.type);
if (theEvent == 'mousedown') {
var mouseX = (NS)?objId.pageX : event.clientX + document.body.scrollLeft;
var mouseY = (NS)?objId.pageY : event.clientY + document.body.scrollTop;
var maxDragZ=null; document.MM_maxZ = 0;
for (i=0; i<document.allLayers.length; i++) { aLayer = document.allLayers[i];
var aLayerZ = MM_getProp(aLayer,'Z');
if (aLayerZ > document.MM_maxZ) document.MM_maxZ = aLayerZ;
var isVisible = (MM_getProp(aLayer,'V')).indexOf('hid') == -1;
if (aLayer.MM_dragOk != null && isVisible) with (aLayer) {
var parentL=0; var parentT=0;
if (NS) { parentLayer = aLayer.parentNode;
while (parentLayer != null && parentLayer != document && MM_getProp(parentLayer,'P')) {
parentL += parseInt(MM_getProp(parentLayer,'L')); parentT += parseInt(MM_getProp(parentLayer,'T'));
parentLayer = parentLayer.parentNode;
if (parentLayer==document) parentLayer = null;
} } else if (IE) { parentLayer = aLayer.parentElement;
while (parentLayer != null && MM_getProp(parentLayer,'P')) {
parentL += MM_getProp(parentLayer,'L'); parentT += MM_getProp(parentLayer,'T');
parentLayer = parentLayer.parentElement; } }
var tmpX=mouseX-((MM_getProp(aLayer,'L'))+parentL+MM_hLeft);
var tmpY=mouseY-((MM_getProp(aLayer,'T'))+parentT+MM_hTop);
if (String(tmpX)=="NaN") tmpX=0; if (String(tmpY)=="NaN") tmpY=0;
var tmpW = MM_hWidth; if (tmpW <= 0) tmpW += MM_getProp(aLayer,'W');
var tmpH = MM_hHeight; if (tmpH <= 0) tmpH += MM_getProp(aLayer,'H');
if ((0 <= tmpX && tmpX < tmpW && 0 <= tmpY && tmpY < tmpH) && (maxDragZ == null
|| maxDragZ <= aLayerZ)) { curDrag = aLayer; maxDragZ = aLayerZ; } } }
if (curDrag) {
document.onmousemove = MM_dragLayer;
curLeft = MM_getProp(curDrag,'L');
curTop = MM_getProp(curDrag,'T');
if (String(curLeft)=="NaN") curLeft=0; if (String(curTop)=="NaN") curTop=0;
MM_oldX = mouseX - curLeft; MM_oldY = mouseY - curTop;
document.MM_curDrag = curDrag; curDrag.MM_SNAPPED=false;
if(curDrag.MM_toFront) {
var newZ = parseInt(document.MM_maxZ)+1;
eval('curDrag.'+('style.')+'zIndex=newZ');
if (!curDrag.MM_dropBack) document.MM_maxZ++; }
retVal = false; if(!NS) event.returnValue = false;
} } else if (theEvent == 'mousemove') {
if (document.MM_curDrag) with (document.MM_curDrag) {
var mouseX = (NS)?objId.pageX : event.clientX + document.body.scrollLeft;
var mouseY = (NS)?objId.pageY : event.clientY + document.body.scrollTop;
var newLeft = mouseX-MM_oldX; var newTop = mouseY-MM_oldY;
if (MM_bL!=null) newLeft = Math.max(newLeft,MM_bL);
if (MM_bR!=null) newLeft = Math.min(newLeft,MM_bR);
if (MM_bT!=null) newTop = Math.max(newTop ,MM_bT);
if (MM_bB!=null) newTop = Math.min(newTop ,MM_bB);
MM_LEFTRIGHT = newLeft-MM_startL; MM_UPDOWN = newTop-MM_startT;
if (NS){style.left = newLeft + "px"; style.top = newTop + "px";}
else {style.pixelLeft = newLeft; style.pixelTop = newTop;}
if (MM_dragJS) eval(MM_dragJS);
retVal = false; if(!NS) event.returnValue = false;
} } else if (theEvent == 'mouseup') {
document.onmousemove = null;
if (NS) document.releaseEvents(Event.MOUSEMOVE);
if (NS) document.captureEvents(Event.MOUSEDOWN); //for mac NS
if (document.MM_curDrag) with (document.MM_curDrag) {
if (typeof MM_targL =='number' && typeof MM_targT == 'number' &&
(Math.pow(MM_targL-(MM_getProp(document.MM_curDrag,'L')),2)+
Math.pow(MM_targT-(MM_getProp(document.MM_curDrag,'T')),2))<=MM_tol) {
if (NS) {style.left = MM_targL + "px"; style.top = MM_targT + "px";}
else {style.pixelLeft = MM_targL; style.pixelTop = MM_targT;}
MM_SNAPPED = true; MM_LEFTRIGHT = MM_startL-MM_targL; MM_UPDOWN = MM_startT-MM_targT; }
if (MM_everyTime || MM_SNAPPED) eval(MM_dropJS);
if(MM_dropBack) {style.zIndex = MM_oldZ;}
retVal = false; if(!NS) event.returnValue = false; }
document.MM_curDrag = null;
if (NS) document.routeEvent(objId);
} return retVal;
//-->
</script>
</head>
<body onload="MM_dragLayer('calendardiv','',375,600,50,400,false,false,0,600,0,0,false,false,0, '',true,'')">
<div id="bannerdiv"></div>
<div id="introimgdiv"></div>
<div id="paperdiv"></div>
<div id="plannerdiv">
Weekly Planner<br />
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
<li class="TabbedPanelsTab" tabindex="0">Monday</li>
<li class="TabbedPanelsTab" tabindex="0">Tuesday</li>
<li class="TabbedPanelsTab" tabindex="0">Wednesday</li>
<li class="TabbedPanelsTab" tabindex="0">Thursday</li>
<li class="TabbedPanelsTab" tabindex="0">Friday</li>
</ul>
<div class="TabbedPanelsContentGroup">
<div class="TabbedPanelsContent">Monday's Content</div>
<div class="TabbedPanelsContent">Tuesday's Content</div>
<div class="TabbedPanelsContent">Wednesday's Content</div>
<div class="TabbedPanelsContent">Thursday's Content</div>
<div class="TabbedPanelsContent">Friday's Content</div>
</div>
</div>
</div>
<div id="tape1div"></div>
<div id="tape2div"></div>
<div id="calendardiv">
<div class="googlecaldiv" id="googlecaldiv"></div>
<img src="Assets/screencord.png" width="50" height="400" onmouseout="MM_effectAppearFade('calbtn', 1000, 100, 0, false)" onmouseover="MM_effectAppearFade('calbtn', 1000, 0, 100, false)" /><br />
<div class="calbtn" id="calbtn"><img src="Images/calendarbtn.png" width="100" height="50" alt="Calendar" /></div>
</div>
<script type="text/javascript">
<!--
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1");
//-->
</script>
</body>
</html>hollowayolemiss wrote:
I have a draggable ap element (calendardiv) on my page. To my knowledge it is set up correctly. I have created one of these before. For some reason now, when I preview the page in a browser...the ap div location shifts to the right side of the browser when I try to drag the element. As you can see I have a projector screen-type setup where all I want it to do is pull straight down centered in the page. What am I missing so that it stays in the middle rather shifting to the right side when I try to drag it? Code below (areas in bold)...
The page is doing exactly what it is supposed to be doing. Dragged absolute positioned divs is not a good way to start out with web design and will only lead you to further problems. The divs are staying on the page, but they are positioned relative to the page edges. So as resolution changes so does the position of the div, especially since you even have some relative positions based on a percentage width. If you want something centered on the page, you should first center a relative positioned div with a defined width and a margin attribute set to "margin: 0 auto;". Then position your content in that and it will always be centered on a page. This is not possible with absolute positioning. -
GridBagLayout and Panel Border problem
I have 3 panels like
A
B
C
and the C panel has a Mouse Listener that on a mouseEntered creates a border around the same panel and on a mouseExited clears that border.
When this border is created the A and B panels go up a little bit .. they move alone when the border is created.
Is there any way to fix this problem? Is there any way to get the panels static?
the code is close to the following:
import java.awt.*;
import javax.swing.*;
import java.awt.event.MouseListener;
import java.awt.event.MouseEvent;
import javax.swing.BorderFactory;
import javax.swing.border.Border;
import javax.swing.border.TitledBorder;
import java.awt.event.*;
import java.text.NumberFormat;
public class Game extends JFrame implements MouseListener
JPanel game, options, top, down, middle;
NumberFormat nf;
public Game() {
super("Game");
nf = NumberFormat.getPercentInstance();
nf.setMaximumFractionDigits(1);
JPanel center = new JPanel(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
gbc.fill = gbc.BOTH;
gbc.weighty = 1.0;
gbc.weightx = 0.8;
center.add(getGamePanel(), gbc);
gbc.weightx = 0.104;
center.add(getOptionsPanel(), gbc);
Container cp = getContentPane();
// use the JFrame default BorderLayout
cp.add(center); // default center section
this.setDefaultCloseOperation(EXIT_ON_CLOSE);
this.setSize(700,600);
// this.setResizable(false);
setLocationRelativeTo(null);
setVisible(true);
addComponentListener(new ComponentAdapter()
public void componentResized(ComponentEvent e)
showSizeInfo();
showSizeInfo();
private void showSizeInfo()
Dimension d = getContentPane().getSize();
double totalWidth = game.getWidth() + options.getWidth();
double gamePercent = game.getWidth() / totalWidth;
double optionsPercent = options.getWidth() / totalWidth;
double totalHeight = top.getHeight() + middle.getHeight() + down.getHeight();
double topPercent = top.getHeight() / totalHeight;
double middlePercent = middle.getHeight() / totalHeight;
double downPercent = down.getHeight() / totalHeight;
System.out.println("content size = " + d.width + ", " + d.height + "\n" +
"game width = " + nf.format(gamePercent) + "\n" +
"options width = " + nf.format(optionsPercent) + "\n" +
"top height = " + nf.format(topPercent) + "\n" +
"middle height = " + nf.format(middlePercent) + "\n" +
"down height = " + nf.format(downPercent) + "\n");
private JPanel getGamePanel()
// init components
top = new JPanel(new BorderLayout());
top.setBackground(Color.red);
top.add(new JLabel("top panel", JLabel.CENTER));
middle = new JPanel(new BorderLayout());
middle.setBackground(Color.green.darker());
middle.add(new JLabel("middle panel", JLabel.CENTER));
down = new JPanel(new BorderLayout());
down.setBackground(Color.blue);
down.add(new JLabel("down panel", JLabel.CENTER));
// layout game panel
game = new JPanel(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
gbc.weightx = 1.0;
gbc.fill = gbc.BOTH;
gbc.gridwidth = gbc.REMAINDER;
gbc.weighty = 0.2;
game.add(top, gbc);
gbc.weighty = 0.425;
game.add(middle, gbc);
gbc.weighty = 0.2;
game.add(down, gbc);
down.addMouseListener(this);
return game;
private JPanel getOptionsPanel()
options = new JPanel(new BorderLayout());
options.setBackground(Color.pink);
options.add(new JLabel("options panel", JLabel.CENTER));
return options;
// mouse listener events
public void mouseClicked( MouseEvent e ) {
System.out.println("pressed");
public void mousePressed( MouseEvent e ) {
public void mouseReleased( MouseEvent e ) {
public void mouseEntered( MouseEvent e ) {
Border redline = BorderFactory.createLineBorder(Color.red);
JPanel x = (JPanel) e.getSource();
x.setBorder(redline);
public void mouseExited( MouseEvent e ){
JPanel x = (JPanel) e.getSource();
x.setBorder(null);
public static void main(String[] args ) {
Game exe = new Game();
exe.show();
}import java.awt.*;
import javax.swing.*;
import javax.swing.border.*;
import java.awt.event.*;
import java.text.NumberFormat;
public class Game extends JFrame implements MouseListener{
JPanel game, options, top, down, middle;
NumberFormat nf;
public Game() {
super("Game");
nf = NumberFormat.getPercentInstance();
nf.setMaximumFractionDigits(1);
JPanel center = new JPanel(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
gbc.fill = gbc.BOTH;
gbc.weighty = 1.0;
gbc.weightx = 0.8;
center.add(getGamePanel(), gbc);
gbc.weightx = 0.104;
center.add(getOptionsPanel(), gbc);
Container cp = getContentPane();
// use the JFrame default BorderLayout
cp.add(center); // default center section
this.setDefaultCloseOperation(EXIT_ON_CLOSE);
this.setSize(700,600);
// this.setResizable(false);
setLocationRelativeTo(null);
setVisible(true);
addComponentListener(new ComponentAdapter(){
public void componentResized(ComponentEvent e){
showSizeInfo();
showSizeInfo();
private void showSizeInfo(){
Dimension d = getContentPane().getSize();
double totalWidth = game.getWidth() + options.getWidth();
double gamePercent = game.getWidth() / totalWidth;
double optionsPercent = options.getWidth() / totalWidth;
double totalHeight = top.getHeight() + middle.getHeight() + down.getHeight();
double topPercent = top.getHeight() / totalHeight;
double middlePercent = middle.getHeight() / totalHeight;
double downPercent = down.getHeight() / totalHeight;
System.out.println("content size = " + d.width + ", " + d.height + "\n" +
"game width = " + nf.format(gamePercent) + "\n" +
"options width = " + nf.format(optionsPercent) + "\n" +
"top height = " + nf.format(topPercent) + "\n" +
"middle height = " + nf.format(middlePercent) + "\n" +
"down height = " + nf.format(downPercent) + "\n");
private JPanel getGamePanel(){
// init components
top = new JPanel(new BorderLayout());
top.setBackground(Color.red);
top.add(new JLabel("top panel", JLabel.CENTER));
middle = new JPanel(new BorderLayout());
middle.setBackground(Color.green.darker());
middle.add(new JLabel("middle panel", JLabel.CENTER));
down = new JPanel(new BorderLayout());
down.setBackground(Color.blue);
down.add(new JLabel("down panel", JLabel.CENTER));
// layout game panel
game = new JPanel(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
gbc.weightx = 1.0;
gbc.fill = gbc.BOTH;
gbc.gridwidth = gbc.REMAINDER;
gbc.weighty = 0.2;
game.add(top, gbc);
gbc.weighty = 0.425;
game.add(middle, gbc);
gbc.weighty = 0.2;
game.add(down, gbc);
down.addMouseListener(this);
return game;
private JPanel getOptionsPanel(){
options = new JPanel(new BorderLayout());
options.setBackground(Color.pink);
options.add(new JLabel("options panel", JLabel.CENTER));
return options;
public void mouseClicked( MouseEvent e ) {
System.out.println("pressed");
public void mousePressed( MouseEvent e ) {
public void mouseReleased( MouseEvent e ) {
public void mouseEntered( MouseEvent e ) {
Border redline = new CalmLineBorder(Color.red);
JPanel x = (JPanel) e.getSource();
x.setBorder(redline);
public void mouseExited( MouseEvent e ){
JPanel x = (JPanel) e.getSource();
x.setBorder(null);
public static void main(String[] args ) {
Game exe = new Game();
exe.setVisible(true);
class CalmLineBorder extends LineBorder{
public CalmLineBorder(Color c){
super(c);
public CalmLineBorder(Color c, int thick){
super(c, thick);
public CalmLineBorder(Color c, int thick, boolean round){
super(c, thick, round);
public Insets getBorderInsets(Component comp){
return new Insets(0, 0, 0, 0);
} -
SWF Export, no font showing in Acrobat and zoom border problem (Acrobat & Reader) - Indesign CS6
Hi Everyone,
If anyone could help me on this that would be great, I've spent hours on the forums and manuals to no avail.
I'm making an interactive PDF brochure in Indesign for one of our new products and I'm having issues (actual or perceived??!!) with the SWF export and PDF creation. I'm placing animations and video in the INDD, exporting it as an SWF (with the text option as Flash Classic Text) and then opening the SWF (not importing to a word doc or anything, just opening the SWF) with Acrobat using the advanced options to import the video resources and to enable the content when the page is opened. I then save the file as a PDF. In the PDF everything works as it should, the animations, the buttons, the video plays and so on. Great.. hmm not quite.
The trouble I am having is that all the content of the SWF when viewed in Acrobat seems to be getting rasterised/flattened - is this correct? After the SWF is opened, Acrobat indicates no fonts in the fonts tab in the document properties so when the SWF is zoomed in Acrobat, or the saved PDF in Reader, the font gets pixelated and the document is not searchable/text can not be highlighted. The images are not selectable either - it is as if the entire page has been flattened to one image. Is there a way to stop this so that the SWF opened with Acrobat retains the font and individual images like a normal PDF? Do I have to open the SWF in Flash first to set some parameters or something? Is there something I am doing wrong when exprting the SWF from Indesign? I think I have tried about every possible export combination. When I open the .HMTL (exported at the same time as the SWF from Indesign) in a browser, the same happens. All the animations work but the text appears to be rasterised/flattened/not searchable. Sorry if I'm not using the correct terminology.
I have tried importing the SWF back into another new INDD and exporting that as an interactive PDF but then the video does not work. I suppose I could try exporting all the individual animations as SWFs, importing them all and trying to get them to work with the video but I can see that will take quite some time and does not seem to be a guaranteed solution from what I have read on the forums - video playback being the issue.
Another problem is that when the SWF, or saved PDF, is zoomed in Acrobat/Reader between approx 150% and 210% a thick white border appears in the document and the content is squashed into the middle creating a slightly pixelated and narrow page. When I zoom out from the page I get a small white line on the right hand border at around 70% zoom. Please see images. Does anyone have any idea why this is happening and what I can do to fix it?
On another, sort of related topic, my timing panel went blank yesterday and was not showing any animations in documents that it had been used to order and synch animations on page load as well as new documents. The panel was blank. I updated to V8.0.1 and the panel sprang back into life - hope that helps anyone else finding the same problem.
I am not very familiar with Indesign/Acrobat/Flash so I guess all the above could be what I'm doing or I could be asking really dumb questions - apologies from a newbie.
Best,
EmilyHi All,
I have now pretty much solved all the issues by creating the SWF in Flash rather than Indesign. I would advise anyone looking to create an interative PDF with animation and interactivity to go with Flash from the start. While Flash is a little more involved to create the same effects as Indesign, the extra time taken will ensure a more controllable and better looking PDF in terms of text quality, scalability and so on. Plus you will not spend days trying to get video to work along side imported SWF etc in Indesign. One of the best controls in Flash is being able to set the stage.scaleMode for the document so the PDF still looks crisp when zooming, no white borders etc. So, create the .fla, export to .SWF, open the .SWF with Acrobat, modify the advanced settings to enable start on page load and save as a PDF. If you don't know Flash, I didn't a couple of days ago, watch a couple of tutorials on Youtube.. buttons, tweens, embedding video and you'll be ready. Don't be put off by ActionScript, there are really handy Code Snippets in CS6 that do all the heavy lifting for you.
Sorry Indesign!
Best,
Em -
Premiere Elements 12 Problems ... still quite buggy?
Hi all,
I used Premiere Elements 11 up to now. Currently testing Version 12 - which appears to be quite buggy to me... Now I just wanted to make sure that it's not me being too dump to find the correct settings...
BTW: I'm using a MacBook w/ Retina from 2012 and most current OS X Maverics as well as a freshly updated APE 12 Testversion (...with German Language)...
1. ...and most anoying one: scrolling in the Timeline left and right on (Apple Magic-)Mouse works now just the other way round than in APE 11 (...which was quite intuitive to me... :-( ) ...I've found some settings for the keyboard, but nothing regarding mouse wheel scroll direction. BTW: is it possible to use up and down scrolling to pan up and down the video-tracks instead of moving back and forth in the timeline (...again).
2. Most interesting new feature of V 12 is the motion tracking (at least for me):
a) I can only use motion tracking with those childish graphics and animation. I just want to use it for simple text as the help message suggests should be possible as well. But the button to place texts is disabled when motion tracking is enabled... is there another way to enable motion tracking on a existing text-and/or-graphic-overlay?
b) I have a lot of videos filmed with a GoPro in upside-down-mode, meaning that I have to rotate the videos by 180 degree in Premiere. Motion tracking appears not to be able to handle that. While objects can be tracked (which is also not too easy as i had to find out) the motion track seems to be way more suitable for the non-rotated video... I've found no way, yet to rotate the track as well (without roating the graphic as well).
So... unfortunately Version 12 is a bit frustrating up to now... Thanks for your help!
LostySorry for your challenges, Losty. I'm having great success with version 12!
Of course, Mac Retina displays are known for causing problems like the ones you're experiencing. I'd hoped Mac would have fixed this by now.
You can certainly use your own text, graphic or even a picture-in-picture with Motion Tracking. I demonstrate how in tutorial on the left side of this page. http://Muvipix.com/pe12.php
As for 2b, I have no idea why you're shooting your videos upside-down, but you certainly are adding an unnecessary level of complexity to your post production. I'd recommend that you first right-side-up your videos in Premiere Elements and then output the finished video using Publish & Share/Computer/AVCHD with the M2T 1920x1080 preset to output the fixed video. You can then use your righted videos in a new project and do all the Motion Tracking you want with it. -
White border problem when zooming with SWF in PDF
Hi Everyone,
I have posted my original querry in the Indesign forum:
http://forums.adobe.com/message/5176893#5176893
I'm having problems with zooming whedn trying to create a PDF with SWF inserted.. at certain levels of zoom I get a white border on the left and right of the document which squashes the content into the middle and makes it a little pixelated. I also get a thin white border on the right when zooming out. Does anyone have any ideas where I might be going wrong?
Thanks,
EmNot wishing to be rude, but that workflow is not supposed to be used that way.
InDesign's ability to export SWFs is intended for showing the file in a Web page, and Acrobat's ability to embed SWFs is only intended for small annotations placed within the pages of a conventional PDF file. By placing the entire Layout as a SWF you are in effect playing the entire thing as a movie in Flash Player - all the advantages of the PDF format are completely lost, there is no vector-rendering of any content or text, and users will find it very hard to understand what's going on (the navigation buttons in Acrobat or Reader will not work, text is not searchable or accessible, multiple pages cannot be printed, etc.).
It's not entirely trivial to do this 'correctly', as at the moment we don't have full support in the PDF standard for all the interactive features that InDesign can apply to page objects - that's why they are grouped into PDF and non-PDF in the various selection menus in InDesign. Rather than saving as a SWF you should be using Export to Interactive PDF, and ensuring that the various interactive items and media are all selected on the export dialog.
Basic stuff such as links and video will export just fine that way, and the PDF will preserve everything else in the Layout as native text or graphics so it'll look fine, navigate properly and be searchable. Animations and buttons will not work as expected, so you may have to revise their behavior if PDF is your intended output destination.
Maybe you are looking for
-
Multiple Issues with Adobe Creative Cloud app.
I'm having multiple issues with the Adobe Creative Cloud app. 1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that: "Installa
-
I need to download iCloud on my iPhone4. I currently cannot because I need to upgrade iOS. How do I do this? I cannot find "software upgrade" in my phone.
-
JCA Resource Adapter Deployment in OAS 10.1.2
Hi, I have installed the Oracle Application Server 10g Release 2 (10.1.2) (j2ee & web cache) and I want to know how I can deploy a JCA Resource Adapter. Until now I have work with Oracle Application Server 10g Release 3 (10.1.3.1.0) and this version
-
deal all, Material master plant storage view storage bin field was disable mode. i m trying to make it enable, checked in oms9 already its in optional only. field reference, mater type, mm01 all i have checked its in optional entyr. any setti
-
J'ai dû installer de nouveau mon Adobe Pro. (J'ai Adobe creative suite 6). Toutes mes applications se téléchargent et ouvrent normalement excepté mes PDF. Le message d'erreur: Error1 s'inscrit. J'ai suivi les instructions et j'ai désinstaller et réin