Elements 7: Unable to view or edit files with extension cr2

Had to reload elements 7 after disk crash. Restored from backups. Unable to view or edit files with extension cr2

Unable to view or edit files with extension cr2
Which Canon camera model? Elements 7 is probably just too old to use the required Camera Raw plugin for your camera.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Camera Raw (the plugin used to read Raw files) is constantly updated to support new cameras as they come on to the market.

Similar Messages

Photoshop Elements 8 - unable to view RAW files

Hi.
I have been using Adobe Elements 8 since it came on to the market. I use Canon Cameras and my latest one being a 1Dmkiv.
When I got the Canon 1D I down loaded the appropriate RAW file I think it was 5.6 and followed the instructions and changed the Camera Raw.8bi file and it worked perfect and I was able to view and edit Raw files.
Last week my computer failed and I have had a new hard drive and hence have had to upload all my software. I installed Elements 8 back onto the computer and reinstalled the photograph catalogues I had backed up within Elements 8 before the computer crash.
When the photographs in the catalogues were viewed only JPEG files were visible, the raw files are shown as a a grey negative with a zig zag across them. I thought that I would have to upload again the lates RAW update, which I did and went through all the instructions as given by Adobe. I changed the Raw.8bi file within Elements 8 and I still am unable to view any Raw files within Elements 8. I desperately need access to these files. Any help would be appreciated
Best regards

Thanks so much for your reply. My problem appeared to be that most of the thumb
nails had lost their links and I had to individually update the thumbnails from within the program. It wasn't a problem
with the RAW file not being updated.

Unable to view scanned PDF files

I registered for Adobe ExportPDF in February. Since then Adobe on my PC was upgraded, and now I am unable to view scanned PDF files. What can be done about this?
Thanks
Rika

Hi David
The update that was done in response to a prompt was done to 10.1.9. Something apparently went wrong, because when I uninstalled it and reinstalled 11.0.06 everything worked fine.
Thanks
Rika

Unable to view and access files

Since updating to Yosemite on my MacBook Pro (early 2011), I have been unable to view and access files on my time capsule. I can still access my backups through Time Machine, but not able to view or access the files that I saved onto the device (by method of copy and paste from my laptop hard drive to the TM). Before the "upgrade" to Yosemite I used to open Time Machine, close it, and then the icon of the TM (just like a typical external hard drive) would show up on the desktop. I would double click and open the TM icon and be able to view all the files that I saved onto the hard drive of the TM, as well as a folder that said "Time Machine Backups." Now, all I see now is my MacBrook Pro Icon and a folder named "File Server." and when I double click on either icon there is nothing to view. Please help!

Try this..
Reset the TC to factory and redo the setup.. I strongly recommend the following setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. If you use ethernet also do it for ethernet.. this is important.
You can see the summary of the same thing from apple here.
OS X Yosemite: Connect to shared computers and file servers on a network
I have given somewhat more specific instructions which I believe are important.
With the TC manually mounted can you access the files??
If not please tell me and I will continue to think how to change permissions.
But please if you can at least open a directory and tell me what the permissions are currently set to.
eg. This is a directory on my TC.

Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.s

Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.sap.com'
Open Internet Explorer
Types in http://help.sap.com/
Click on mySAP ERP
Click on English
The webpage goes to
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
It shows the status done but what I see is just a blank page
I tried going to different areas of SAP Help files but no success
I cannot even open Help on Help http://help.sap.com/saphelp_erp2004/helpdata/en/3f/a42938955df162e10000009b38f842/frameset.htm
None of the other users have this issue

Hi
I am able to open your links. I think there is some problem in your internet explorer. please check
regards
Srinivas

Unable to view direct editing

Hi Team
Unable to view direct editing in the Um managent
please guide me through the steps to activate it
Thanks
Madhu

Hi Madhu,
In EP 7.0 the Direct Editing has been removed and the same can find in config tool.
Login into Config Tool, Select Server --- services --- com.sap.security.core.ume.service and then edit the properties accordingly which requires portal restart to reflect it.
Check it once and do let me know if you have any clarifications
Cheers
Venkat

Unable to install the Novell File Upload extension to upload directories

Using Firefox 9.0.1 on Windows 7 I'm unable to install the Novell File
Upload extension to upload directories.
As per the pop-up help page, I've added
extensions.install.requireBuiltInCerts in about:config and set it to
false but that has made no difference, even after restarting the browser.
I've also tried this with Firefox 9.0.1 on Mac OS X Snow Leopard
(10.6.8) - unsupported I know - with the same result.
Do I really have to use Internet Explorer? Urgh!
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

On 19/01/2012 18:11, craig wilson wrote:
> You should trust the ZCM CA and the error will go away.
> It's not expected to get that error.
> Managed Devices especially will have loads of issues if the ZCM CA is
> not trusted.
So, with Firefox, first hitting http://<server>/zenworks/ after install
displays
--begin--
This Connection is Untrusted
You have asked Firefox to connect securely to <server>, but we can't
confirm that your connection is secure.
Normally, when you try to connect securely, sites will present trusted
identification to prove that you are going to the right place. However,
this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could
mean that someone is trying to impersonate the site, and you shouldn't
continue.
[Get me out of here!]
> Technical Details
> I Understand the Risks
---end---
so I click "I Understand the Risks", [Add Exception...] then [Confirm
Security Exception] at which point http://<server>/zenworks/ correctly
displays and I can log in. Checking Tools | Options | [View
Certificates] shows an (Unknown) server certificate for <server> with a
Permanent lifetime.
Is that what you mean by trusting the ZCM CA?
Perhaps this is why Firefox 9.x is not a supported browser though I
thought that was more to do with Mozilla treating major version numbers
as minor ones? Gee if only Firefox hadn't automatically upgraded itself
from 8.x to 9.x!
Thanks.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Unable to view the option register with ESB

Hi,
After installing SOA suite we are unable to view the option register with ESB on right click of fulfillment ESB in Jdeveloper .We had followed all the steps listed in the installation document still unable to resolve this issue.
Thanks in advance !!
Dhanesh

Cannot Register with ESB unless
1: full JDev 10.1.3.3 Studio Edition
2: Added Application Server in Connections Navigator
3: Added Integration/ESB server in Connections Navigator on that Application Server.

How do I view ipod music files with out using I tunes?

I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
How do I view ipod music files with out using I tunes?

they should be under ur my music folder if u have windows

HT204382 Hello, which one should I download to be able to view a file with extension .avi ? Thanks.

Hello, which one should I download to be able to view a file with extension .avi ? Thanks.

Try Perian.
(68748)

What adobe app can decode files with extensions bup, ifo, vob?

What adobe app can decode files with extensions bup, ifo, vob?

>bup, ifo
Nothing... those are part of the file structure of a DVD
>vob
This is the actual video on a DVD... so Premiere Elements or Premiere Pro

When a file with extension .htm as a product from Epilex is opened, there was a notify a screen, "This epiLearn is not supported on Netscape browsers. epiLearn supports Internet Explorer 5.5 or above. Please launch it in Internet Explorer"

My company has decided to use Epiplex software.
But when a file with extension .htm as a product from Epilex is opened, there was a notify a screen,
"This epiLearn is not supported on Netscape browsers. epiLearn supports Internet Explorer 5.5 or above. Please launch it in Internet Explorer".
I prefer to use Mozilla than Internet Explorer. Would u please handle Mozilla browser along this problem to be available in this matter?

This might be simple but it works well for me.
1.
Right click on the tool bar in IE8 and uncheck adobe PDF to disable. Click yes when it ask if you are sure.
2.
Open Adobe
READER located in the start menu.
3.
Click on Edit and then on Preferences.
4.
Select the "General" category.
5.
Click on "Select default PDF handler"
6.
Adobe Reader should be already selected. Change it to reader if it is not.
7.
Click on "Apply" and except changes.
8.
Restart the computer and you are done.
Now you can open and save PDF's from IE8. Once you save it, you can right click and "open with" Acrobat if you choose.
Be careful to not make Acrobat the default or you have to start over.
You can still create PDF's from docs, scans, and picture like before. You might think this is a work around but it really isn't.
Some forms that are available on the internet can't be opened by Acrobat for security reasons.
Good luck! P.S. I am not an IT tech but I play one on TV.

Files with extension .sbc

i recently started using vodafone email to listen to the messages but i receive them in files with extension.sbc
any software to open those files and listen to my messages???

Check [this page|http://www.neowin.net/forum/lofiversion/index.php/t540796.html] Doesn't look promising. Proprietary technology so if the main company doesn't support Macs then you're probably out of luck.

Photoshop wont let me save files with Extensions...

Photoshop isn't letting me save my files with extensions any more. It's only saving files as copy's and I have to add the extensions manually. This happened around the time I updated to OSX maverics, and is driving me crazy as it is extremely time consuming. I'm using CS5 version. Please Help!!

Thankyou! That worked to fix the file extensions part of the problem. I had somehow changed it to "never "instead of "always".
I'm still having the error message problem that photoshop is forcing me to save the file as a copy though. See the attached photo for the error message I'm receiving.
Do you know how to fix this? So that I can save work to the original image?

Unable to view PDF (baggage file) in CHM

Hi,
I have recently started using a new desktop pc running Windows 7. I am now unable to view PDF files (added as baggage files in RoboHelp) in the CHMs generated by RoboHelp. Even existing CHMs (generated before switching desktops) have this problem. Has anyone experienced the same problem and managed to solve it?
Sofie

A while back someone told me they had a similar problem with IE8 and advised they fixed as below:
"After fiddling around with some settings, I found that if you go to Settings/Safety and enable Active X Filtering, the embedded files open normally."
That will only fix it on your machine though. Do these CHMs work on other machines OK?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Elements 7: Unable to view or edit files with extension cr2

Similar Messages

Maybe you are looking for