Elements 8.0 for Win XP Pro 2002 SP3 Editor always crashes
I just installed Elements 8.0 on a Win XP Pro SP3 machine with 2.5 GB of RAM and everytime I try to EDIT from the Welcome page or start the Editor from the Edit menu in Organizer I get a dialog box that it "loading the photoshop elements editor workspace...." and it crashes. The error is the generic MS error dialog that says
"PhotoshopElementsEditor.exe has encountered a problem and needs to close. The AppName is PhotoshopElementsEditor.exe AppVer:8.0.0.0 ModName unknown ModVer 0.0.0.0 Ofset 00000004"
I can use the Organizer fine and have had NO problems there, but when I try to Create or Edit or anything other than the organizer I get this error. I have been through all the basic troubleshooting of turning off other items in my startup (virus itunes, etc) and no change. I also updated my Display Driver NVIDIA Quadro FX 500/600 PCI and all with NO luck.
Any ideas or is there somewhere I can get a live person for support?
thanks
Dan
Turns out it was my Dell AIO Printer Driver..... I tried removing it after reading a few other post about PSE 8.0 Editor crashing in Windows 7. There were two other users that were having the same problem and both had the Dell AIO printers. My problem was with Windows XP Pro SP3 but uninstalling the driver did the trick
thanks
Similar Messages
-
Audio garbled with 9.0.115.0 for Win XP Pro
Using Win XP Pro and IE7, Audio is garbled in some Camtasia
Studio productions with 9.0.115.0 that still play just fine with
9.0.47.0 installed on a laptop.
Steps taken:
1. Have updated Driver, Realtek AC97 Audio, (ALCXWDM.SYS,
version 5.10.0000.6270, date, 10/26/2007).
2. Installed K-Lite Codec Pack 357 Full.
3. Ran CCleaner and cleared cache for Adobe Flash Player.
4. Affirmed configuration is set for Desktop Stereo.
5. Secured all Audio Cables.
6. Tried to re-install 9.047.0 by uninstalling 9.0.115.0 and
running the archived flashplayer9r47_winax.exe, but the installer
would not run after giving me a popup advising of a newer version
available for download that was recommended as more secure by
Adobe.
SUMMARY: Some audio remains ungarbled (MP3s and UTUBE), but I
have had trouble with some Camtasia productions.
1. Does anyone have any ideas about what is going on and
possible remedies?
2. Is there a way to get flashplayer9r47_winax.exe to
actually run and go back to the previous version 9.0.47.0?
Thanks for your help.I have finally clarified the sound problem I reported in this
forum.
See below.
TechSmith
Camtasia Studio Support
Flash files with audio sound garbled or high pitched
Question
Flash files played in the the newest version of the Flash
Player sound garbled or have a high-pitched "chipmunk" sound to
them.
Answer
http://techsmith.custhelp.com/cgi-bin/techsmith.cfg/php/enduser/std_adp.php?p_faqid=1250&p _created=1197056770&p_sid=BZo7CNSi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmc F9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MTImcF9wcm9kcz0wJnBfY2F0cz0mcF9wdj0mcF9jdj0mcF9 zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PUZsYXNoIFBsYXllcg**& p_li=&p_topview=1
Flash files with audio sound garbled or high pitched
Question
Flash files played in the the newest version of the Flash
Player sound garbled or have a high-pitched "chipmunk" sound to
them.
Answer
The latest release of the Flash Player (v9.0.115.0 released
on 12/03/07)) causes audio to sound garbled and/or high pitched
like a chipmunk. Our development team is looking into this issue
and working to find a fix.
To avoid this problem, you can roll back your Flash Player to
a previous release. If you have problems installing an older
release of the Flash Player please review this article and contact
Adobe for further support.
At this time, the problem is limited only to SWF files
produced with the MP3 audio codec. As a workaround, you can produce
your SWF files with the PCM audio codec or use the FLV format
instead of SWF.
Adobe Flash Player Support
Reinstalling an earlier version of Adobe Flash Player
Contact Adobe:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402435&sliceId=1
Safe versions security restrictions when installing Flash
Player
Issue
If you previously installed a later version of Flash Player
for Internet Explorer, you may be prevented from installing an
earlier version. For example, if you installed Flash Player
9.0.47.0 and attempted to install version 9.0.45.0 the installation
would fail.
Reason
This issue is due to registry key settings applied by the
Flash Player security model. The restriction is to prevent users
from downgrading Flash Player minor versions. The minor version of
Flash Player is the third set of numbers in the version name. For
example, the minor version for Flash Player 9.0.47.0 would be 47.
If Flash Player 9.0.47.0 was installed and you attempted to install
9.0.45.0 (minor version 45), the installation would fail.
Solution
To resolve this, download the uninstaller for Flash Player
from "How to uninstall the Adobe Flash Player plug-in and ActiveX
control" (TechNote tn_14157).
Select Start.
Select Run.
Type cmd
In the command window, type the following:
uninstall_flash_player.exe /clean
This will remove all entries in the system registry and
resolve this issue.
Note: The uninstall_flash_player.exe file must be saved to
the same directory that the command window is in, for example C:\.
Additional Information
If you are still having trouble installing Flash Player,
please see "Troubleshooting Adobe Flash Player installation for
Windows" (TechNote tn_19166).
TechNote Details
Last Update: 08-16-2007
ID: kb402435
OS: Windows Vista
Windows XP
Browser: Internet Explorer
Permanent Link:
http://www.adobe.com/go/kb402435
Products Affected: Flash Player -
Audio drivers for Compaq C770LA for Win XP Pro / integrated mic not working
Hello. I have downgraded a Compaq C770LA to Win XP Pro SP3. Almost everything seem works perfect, but I have tried several audio drivers and still can´t get to control or use the integrated mic which this notebook has. I can hear audio and even record, etc, but there is no way to use or get to the integrated mic and some of the volumen controls I was used to (as "Record whats been listened") are lost. Does anybody knows wheter I have to change the driver or if it´s going to be any difference if I install for example the smartaudio add-on? I tried HP but they replied they don´t provide drivers for notebook for Operating Systems other than the one they gave the notebook with.
Thanks in advance for any clue!Try XP downgrade guide, here
Your model is in Part 2.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD -
No logon server available for Win 7 Pro to join new 2012 Standard domain
I can't get a Win 7 Pro client to join a new 2012 Standard network. I am trying to use a Win 7 Pro computer from an old 2011 SBS FE network. I am creating the new network from scratch and got as far as setting up the new server, establishing
Internet access, and confirming that the client can ping the new server, which accepted new user credentials for the new domain added to the old client. I rebooted. Now I get the message that no server is available to service the
logon request, for all domains and all user accounts on the old 2011 client, including the individual computer "domain." I can't access anything on the client. Server still accepts the user account and password.
Unsuccessful efforts: rebooting old client; searching archives for solutions; disabling DCHP on router; and jumping out window.
Suggestions?
PaulHere is the answer for the DC/DNS (still working on accessing client):
PS C:\Users\Administrator.COMPUTER-23> ipconfig /all
Windows IP Configuration
Host Name ... Computer-23
Primary Dns Suffix ... Domain-23.com
Node Type ... Hybrid
IP Routing Enabled ... No
WINS Proxy Enabled ... No
DNS Suffix Search List ... Domain-23.com
Ethernet adapter NIC1:
Connection-specific DNS Suffix ...
Description ... Broadcom NetXtreme Gigabit Ethernet #2
Physedical Address ... F8-BC-12-53-21-8E
DHCP Enabled ... No
Autoconfiguration Enabled ... Yes
IPv6 Address ... fd8d:c258:7c99:3333::1(Preferred)
Link-local IPv6 Address ... fe80::99b7:5cf5:926c:8d42%13(Preferred)
IPv4 Address ... 192.168.1.2(Preferred)
Subnet Mask ... 255.255.255.0
Default Gateway ... 196.168.1.1
DHCPv6 IAID ... 335068178
DHCPv6 Client DUID ... 00-01-00-01-1B-C1-2C-DF-F8-BC-12-5-21-90
DNS Servers ... ::1
...................... 127.0.0.1
NetBIOS over Tcpip ... Enabled -
I have text rendering prob with firefox on win xp pro sp 3, I have the latest firefox as well,I encountered this prob with win 7 and it was an update, if this is the prob here which one is it ? This was an os update and not firefox update that gave me the prob in win 7... Thanks guys....
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
See:
*http://kb.mozillazine.org/Websites_look_wrong
*https://support.mozilla.org/kb/Websites+look+wrong
*https://support.mozilla.org/kb/Website+colors+are+wrong
*https://support.mozilla.org/kb/Changing+fonts+and+colors
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly. -
Dynamic layout elements determination logic for output of Pro-Forma Invoice
This is my requirement below. Please give the suggestion
Business requires output to be generated in name of the client, with client logo and scenario specific data elements. To do this in Standard SAP will require to define hundreds and hundreds of layouts. By making most of the client/scenario elements on the layout we can greatly reduce the number of required layouts and reduce implementatuion effort and lead-time.
The goal is to define a generic table that will hold most of the dynamic layout elements for different document types and countries, including logo, sender address etc.
For this we will create Z-versions of the output types BA00 ( Order Confirmation, ZPRI (Pro-Forma Invoice) and RD00 (ZD00 Invoice).The layout text blocks will be permanently fixed.The print Program user-exit should call the Z-table that holds the dynamic layout elements and retrieve these elements and merge them with the matching layout text block.
Message was edited by: janardhan bHi Janardhan,
Even I have faced the similar situation.but what we have done is instead of calling the dynamic text elements..Why don't we call the text elements based on the required condition ,Then u dont have to maintain all the text elements required in the table.In the table we can only have the doumnent type,client name,logo name and address.
In the print program if u r using script layout then call the required text elements (write_text) based on the client name and document type that is fetched from the Z-table,Otherwise if u r going for smartforms then with in the layout give the condition under the conditions node of the window or the text. -
Will Ideapad G475 supports for Win 8 Pro?
I had try the Win 8 Enterprise Evaluation Edition which I downloaded from MSDN. I found that the Win 7 Drivers provided by Lenovo Support not all well supported by Win 8. There are few driver even facing installation issues while installing, which is the drivers of Bluetooth, amd video driver, touchpad driver and amd storage matrix driver.
Although it perform more responsive than win 7 most the time, but with lack of complete support by drivers and some software. So, I reinstalled to Win 7 after few days try.
Here, I just want to ask to those who had try Win 8 Enterprise Evaluation Edition on G475 about the experience. For information, I found that G475 is not in the win 8 upgrade compatible list provided by Lenovo.
Thanks in advanced for following reply. Have a nice day everyoneyo tengo la g475 y si soporta windows 8 con los mismos controladores de windows 7, instale windows 8 y los controladores que habian publicado en su sitio no sirvieron, probé con los controladores de windows 7 y me funcionó perfectamente bien, solo en el caso del controlador de video en programas y características-activar o desactivar características de windows aquí activar la cuadro framework 3.5 se descarga esta aplicaciion y funciona perféctamente el controlador de video. Recuerden que despues de instalr el controlador de video se tiene que activar y descargar el framewotk 3.5 y a disfrutar complétamente win 8 sin problemas.
-
Photoshop elements 10 support for fuji x pro 1 raf files
How do I open fuji raf files from a fuji x pro 1 camera in photoshop elements 10? I have downloaded the camera raw 7.1 plugin update and tried to run it but it tells me it is not appropriate and will not install.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Mylenium -
Laserjet 1100 drivers for win 7 pro 64bit
need drivers for the above
details
Laserjet 1100 mono
model" s4224a
sggjo25836
these are the only details on the sticker on the back of the printer..
It does NOT have product number.
comes up wth this error
Error: This product number is not associated with the serial number provided. Please review your records and make any necessary edits.
Have tried upper & lower case with the same result.
Help please!Hi,
The drivers for your printer are already included within Windows Update.
Follow these steps to install the printer on a Windows 7 PC:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
How to calibrate a monitor for Win 7 Pro?
Thanks for any suggestions?
Hersch Pilloff [email protected]Some devices will calibrate/profile only monitors, some (more expensive ones) will also profile printers. Profiling printers is not so important to most people.
Older devices (e.g. Eye One Display 2, Spyder 2) are not suitable for wide-gamut displays.
There are no special requirements for Lightroom or Windows 7.
Google for reviews such as http://www.northlight-images.co.uk/reviews.html#Monitor_profiling -
K850 printer drivers and updated toolbox for win 7, pro 64 bit
When will HP provide an updated driver and toolbox for the wide format inkjet printer? This expensive printer is useless without the toolbox. No way to align heads or check the accuracy of head alignment.
If HP abandons this printer it will join the 4 HP scanners sitting in my garage that $2300 were spent on and are now useless because HP chose not to provide updated drivers for them.
This will be my last HP product unless they stepup and support the products they sell.Please be aware that this forum is a peer to peer support forum, it is not a direct link to HP support.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Win 7 Pro 64-bit / DW CS5 crashes when opening files with external links
open any html, php, etc with a link to an external file - could be any type
dw cs5 crashes
this is on a fresh, clean install of win 7 and cs5 suite. hard drive was wiped clean before installing
Has anyone experienced this issue also?
This is extremely annoying... why I should pay for software that doesn't work?"Enable Related Files" isn't the fix for this issue. It's slightly different - I wanted to still load related files, but only the ones local to the file I was editing.
The fix was to use DW's Resolve To IP Address feature. It required adding a registry value - it fixed the issue straight away
This Adobe support doc helped: http://kb2.adobe.com/cps/887/cpsid_88742.html -
Premiere Pro Cs6 on MAC ALWAYS crashes when I render.
I have an 27' Imac with a 3,4Ghz i7 processor. Plus 8Gb of Ram.
AMD Radeon HD 6970M 2048 MB
And runnning
OS X Lion 10.7.5
I can`t understand why my computer at work with an i5 processor , 4Gb o Ram and with OSX Snow Leopard never crashes with Cs6 and runs it better.
Any solutions?
It has never work well on my computer since the day I installed it.
Please Help!http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html
Also, Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
maverick
or
mavericks
or
10.9
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question -
Novice questions:
1. What is the proper procedure for:
Creating Recovery Discs for Win 7 Pro 64 - When Win 7 Pro 64 is "Preloaded by Lenovo from Win 8.1 Dowgrade Rights" ???
2. Will I then be able to use these Win 7 pro 64 - Recovery discs in the future should I need to "clean install Win7 Por 64 on the computer again ?
3. Also, If I use an Imaging Pgn like - Paragon Backup and recovery will I be able to reload win7 image and have win7 activated automatically just be restoring the Paragon backup image ?
JosephB
T61 6459-CTO - 15.4 WXGA - XP SP3
Solved!
Go to Solution.JosephB wrote:
... BTW, when you perform the - Weekly "Macrium - Image Backups", do you backup to a local USB cable connected External Usb Drive or wireless wifi connected to a NAS Drive ?
I have a Verbatim 2TB external USB 3.0 drive plugged into the PC. It's used for both my weekly image backups as well as my nightly data backups. I have one of these on EACH machine in my environment, for backups local to that machine. I also use them on machines I build for friends and family, as everybody needs a backup system for "priceless data".
Actually, to be a bit more complete, my "data" backups consists of two parts: (1) 1st-of-the-month FULL backups of all my data, and (2) nightly INCREMENTAL backups which handles anything created/changed in the past 24 hours. Thus a "backup set" consists of the beginning FULL backup coupled with the ever-growing throughout-the-month set of nightly INCREMENTAL backups.
NovaBACKUP can handle all of this if you need to recover something, so you yourself don't need to know exactly which backup file your file is located on. You simply identify the folder/file(s) you wish to recover, and the AS-OF date you want for that file (with "as of the latest version available" being the default). If you want to recover an older version than the most current version, you simply slide a GUI time-slider backwards until you arrive at the as-of date you desire. NovaBACKUP then figures out where the most current version is AS OF THE DESIRED DATE, and accesses that one-or-more backup files in order to complete your task.
I retain multiple "backup sets" (going back 4 complete months), so I can recover any folder/file(s) I had available on any specific night during the past 4 months. Most commonly of course it's typically "get me the most current version available as of last night", but just in case that version is corrupt or I truly want an earlier version, I can get it easily. -
Win 7 Pro or Win 8 Pro on W530
My W530 arrives in a few days. It is pre-configured for Win 7 Pro, but comes with a Win 8 Pro installation DVD.
I know Win-7 reasonably well. I've installed Win-8 on several laptops, keeping what's good (the updated OS), adding the "start" button, and rarely, if ever, dealing with the "Metro" screen.
For those of you who have used both, is the W530 equally useful with either OS, or is there a good reason to use one other than the other?
I assume all the future development from Microsoft will be going towards Win-8, the new "Windows Blue" that will be available sometime soon, and that Win-7 will eventually get much less attention. I think that's a good reason to start out with Windows 8 now, unless the W530 works better with the older OS.
Any advice from people who have used both?Hi mikemyers
If you are still using some legacy applications or games, it is better to use Windows 7. (Some of the current games are still not compatible for Windows 8)
If you are only using new applications, it is better to use Windows 8 as it provides better overall and much better startup performance.
Personally, with the start button with "StartIsBack", I would prefer Windows 8 for better performance and battery life.
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future | Please do not email me regarding technical problems, you could post it in the forum
=====================================
Sound Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet
Maybe you are looking for
-
Cannot connect to database: TNS error
Hello, Please can anyone help? <br><BR> I'm running a 10g database on a vmware image. <BR> In the same image i installed OBIEE 10.1.3.3.1. <br> When i do not start the BI server, i can update the row count in the repository.<BR> However, as soon as i
-
Can't delete or edit a Mail account that is unable to connect and it keeps notifying me
Can't delete or edit a Mail account that is unable to connect and it keeps notifying me and asking for password. Macbook Pro with Yosemite. If I highlight the account and go to Mailboxes, "Edit smart mailbox" is greyed out. Delete the mailbox is an o
-
HT2693 The Icloud acount has little use but saying its almost full
Dear Sir/Madam, I have this Icloud acount and very happy with it. I also have some Apple Devices such as Ipad, Iphones etc. From those devices I have checked that I had used less than 1G in usage. but it shows that my account is almost full. I have c
-
Font sizes for message change when mailbox or message list is changed
When changing the preferences for message font to something a bit more readable (ie, 14 pt), that doesn't seem to actually affect the message font size except on the message I am actually looking at at that instant. It always reverts back to size of
-
Making iTunes automatically change track info of playlists
Hello all, I'd like to know if there is a way to automatically change song info of all the tracks in a specific playlist. More specifically, I'd like to know how to make itunes automatically change the Grouping of songs as I add or remove them from a