Elements 8 Insatallation Problem - Help?
Hi - I've just purchased Elements 8. When I put the disc in the DVD Drive of my PC I get no Installation Wizard. I can find no Setup.exe file on the disc.
Any suggestions as to where I am going wrong or what I need to do?
The booklet that comes with the disc tells me to insert the disc and follow the on screen instructions... but when I insert the disc I get a widow with the contents of the disc - there are no on screen instructions.
There are 2 files - one of Elements 8 and the other for Adobe Reader 9.
There is a PNG File marked .bg, 4 HTML files, a Setup Information fileand an icon file.
When I open the Elements 8 file I can fine no Setup.exe file or any way to start the installation of the program.
Am I missing something obvious here? Any suggestions would be greatly welcomed. Thanks
Similar Messages
-
Adobe Premiere Elements 11 Effects Problem - HELP
I use Adobe Premiere Elements 11, and when I use effects the footage ends up speeding up, repeating itself, and just not staying the same as it originally was. Does this have to do with what type of footage it is. I am using screen-captures that I got when using Bandicam. If anyone could help me with this problem, it would be greatly appriciated, thanks.
Gamerwalk,
One option would be to convert your odd AVI-MPEG file to DV-AVI, which is what PrE loves most. This FAQ Entry will give you some tips on doing that: http://forums.adobe.com/thread/415317?tstart=0
I use an older file conversion program, DigitalMedia Converter 2.7, but it is NOT freeware. Also, Deskshare, the publisher, has released newer versions.
Good luck,
Hunt -
Adobe Premiere Elements 11 Uploading Problem - HELP
I recorded some footage with Bandicam, then editted it, using a lot of clipping and cropping of the footage to give it a widescreen look. When I uploading it, I choose the setting of "High Definition Video for YouTube". When it finally uploaded, it looked out of wack. Footage was shrunk down and the cropping was off. When I re-uploaded it under the setting of "Flash Video for YouTube" it came out perfectly, just not in high quality. What setting should I use this time?
The Tutorial Links Page http://forums.adobe.com/thread/1275830 may also help
Plus...
Premiere Elements FAQ List (2 pages of FAQ as of September 2013) http://forums.adobe.com/community/premiere_elements/premiere_elements_faq?view=all
Premiere Elements TIPS List (6 pages of Tips as of September 2013) http://forums.adobe.com/community/premiere_elements/premiere_elements_tips?view=all -
Elements 9 printing problem HELP !
After opening Nikon RAW file, doing all I want to do with it, then File/Print - it randomly tells me I need to install a printer (yes it is installed and yes it works perfectly sometimes) - sometime it works fine but sometimes it doesn't but when it doesn't I have to kill the Editor process in Task manager and restart the PC to make it work again. This use to work fine with 8 and it's driving me up the wall!
I'm currently trying to deal with and print a friend's wedding photos and at this rate I will still be here at Christmas!
#HELP#
Graham A
Gloucester UKYou may wish to start by be making sure you have the latest version of your printer's driver installed on your computer.
The other thing you may wish to try is resetting PSE's preferences by:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click on Edit.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Sometimes the settings file gets corrupted and resetting may help. -
i have installed photoshop elements 12.
when I try use the editing features it said that i must login to Adobe to register the product.
but each time i try to it said there is a problem.
help
the problem stated that the internet is not connected, but that is not the case.I had the same issue and I'm running Windows 7. Tried working with technical support for several hours but they were no help. They just had me doing the same things over and over, offering no real answers. I finally got fed up and have decided to return my product for a full refund.
-
Premier Elements 9 operating problems
I am just getting around to using Premiere Elements 9. I installed it and Photshop Elements 9 at one time several months ago and have used Photshop Elements with no problems.
A. When I start Premiere Elements and get to the Welcome Screen. I select "New Project" after a short period the New Project Window pops up. I can not enter data into the window. If I close that window, and go to File, New, Project. The New Project window opens again with the Name box Highlighted with "New Project". I give it a new name after which nothing can be entered in the other boxes and "OK" can not be selected.
B. At this point, I uninstalled Premiere Elements then reinstalled it with my installation disk. It promps to shut down the computer after disk 1 whick I did. After rebooting the computer, I again went to the welcome screen of Premier Elements and select "New Project". The new project window opens with the Name Box Highlighted with "New Project". I give it a new name and I can now select "OK". The program now opens. A box appears indicatiing there is limited content and asks to install additonal content with the content disk after which I then inserted the disk 2. It asks to select "Yes" but I can not select it. Therefore the Content Installation Disk will not install at this point.
C. At this point, I close the program and then Installed the Premiere Elements Content Disk. I restart the program and at the "Welcome Screen" I select "New Project". The program responds exactly as in the paragraph A. shown above with no access to the program.
D. I again uninstalled and then reinstalled Premiere Elements. At the completetion of the installation of disk 1, instead of shutting down and rebooting. I now install the content from disk 2. I now reboot the computer and go to the Welcome Screen and select "New Project". The program responds exactly as in paragraph A. above with no access to the program.
I am at a loss to figure out how to get this program to work. For your information, I am using windows 7, 64-bit on a Dell XPS 8100 desktop computer.
Any help in this matter would be greatly appreciated.
Tom MitchellTom,
Welcome to the forum.
Take a look at this ARTICLE, which starts with a checklist to get PrE working best. It next goes into a lot of troubleshooting steps to tune up one's OS, and computer.
I would also look into your dispaly driver, i.e. the video card's driver. What make/model of video card do you have installed?
What is the installed video driver's number/date?
Have you gone to the Dell driver download page, to see what the latest driver is? If not, that would be my first step, and download and install that driver.
Good luck,
Hunt -
Hi I have an Elements 10 recompose problem. I unlock the background layer, choose the recompose tool, mark the elements I want removed red, but when I squeeze the picture together, the red marks immediately disappear and those formerly marked red elements do not disappear. Can anyone help? Thank you so much, I really need this feature, Thomas.
I'd first try resetting the Recompose Tool by clicking on the small white downturned arrow (far left just above the toolbox)
and then click on Reset Tool.
If that doen't work then resetting the pse 10 editor preferences might.
Hold down the Shift+Alt+Ctrl (Shift+Cmd+Option mac) keys just after starting the launch of the pse 10 editor.
Keep holding the keys down until you get a dialog asking if you want to delete the photoshop elements settings file.
Press Yes because you do. -
My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!
Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?
-
I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097 -
IPad syncing problem - HELP!
iPad sync problem - HELP! I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)" and yet I seem to have plenty of space on the iPad. This just started today. I even tried deleting some things to make even more room, but it didn't help. Any ideas???
I was thinking of restoring, but I've never done it... should I?
thank you!Hello florafromnv,
Welcome to Apple Support Communities.
The following article addresses how to resolve the issues related to this message:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Regards,
Jeff D. -
This topic has been moved to Overclockers & Modding Corner.
KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!Not that I am an expert o/c but here are some thoughts on the matter.
My comments are based on my experiences of the KT3 Ultra2 which is basically the same as the Ultra version.
This mobo does not have the ability to lock the PCI/AGP bus freely from the FSB. However, it does have dividers. At 133 a 1/4 divider kicks in. Above 152FSB the 1/5 divider works, so that at 166 the PCI & AGP buses will be back in sync. If you are o/c your cpu, don't go from 133 to 145, etc since you will be running the PCI/AGP buses further out of whack. Just go to either the mid 150's or to 166 in one jump. The other problem / issue relates to your cpu. From what you say you have one of the old Palominos which are not great o/c's. I would personally o/c your cpu from the BIOS rather than 'Fluffy Logic' which I would tend to stay away from.
With a 166FSB cpu a very stable o/c would be 175-177 beyond 180 gets decidedly tricky.
Hope this helps -
Help!! Itunes keeps closing straight away and message states 'windows has detected a problem' HELP ASAP PLEASE!!!!
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected] -
Premiere Elements 12 output problem
I am having problems outputting my project. Different errors messages. One says transcoding error. Another time it says export error. Other times it crashes. And then the program won't even open.
Any suggestions?
bwatson9Steve,
First, thank you for your prompt response. This is the first time I have used Premiere Elements 12. I don't seem to have a manual for the software.
The product was bought with my new computer. I am using windows 8.1 (64-bit) with Intel Core i7-4770 CPU @ 3.40GHz. I have 12 GB of installed RAM. I have 1TB hard drive of which this is the first project I done.
I have checked to make sure that I am getting all Windows and Microsoft Updates. I even manually went to Windows Update and installed the optional updates.
The project is a 20 min. video using mostly photos and 2 small video clips. The project is saved in its own folder.
When I go to the timeline in Expert view I do see an orange-yellow line above the timeline. It runs the whole length of the project.
I understand from reading the FAQ's that each photo cannot be larger than 1000 x 750 pixels. I will check that and reduce their size. Is there anything else that I need to do?
Where can I find a manual?
Thanks,
bwatson9
Date: Sun, 23 Mar 2014 06:31:03 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Elements 12 output problem
Re: Premiere Elements 12 output problem
created by Steve Grisetti in Premiere Elements - View the full discussion
A lot depends on a lot.
What operating system are you using? What processor do you have and how much RAM and how much free space is on your hard drive?
How long is your project? What model of camcorder is your video coming from and what format and resolution is it?
Have you ensured that your project file is saved to its own folder, with no other project files in this folder?
When you add your video to your timeline in Expert view, do you see a yellow-orange line above the clips, along the top of the timeline? This indicates a mismatch between project settings and video specs.
If you are on a Windows computer, have you set up your computer to get both Windows and Microsoft Updates -- and have you manually gone to Windows Update and ensured you have even the optional updates that don't install automatically?
When did you last run Disk Cleanup and Disk Defragmenter?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6234402#6234402
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6234402#6234402
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6234402#6234402. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys
i can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys?? i don't know what to do..
Why are you unable to install the iPod Updater? Are you getting an error message? Please be specific.
Cheers!
-Bryan
Maybe you are looking for
-
Re: How can I add a second internal hard disk to a Satellite Pro P200?
I have a Satellite Pro P200 with a single internal hard disk. There is a second bay under the computer for another internal hard disk but I have not been able to find any information about it. There is enough space for a 2.5" SATA drive but I cannot
-
Unable to change preferences for Adobe Reader 9.4.2 on Ubuntu 11.04
I installed Adobe Reader 9 via the Ubuntu Software Center. The installed files are located at /opt/Adobe/Reader9/ The reader runs ok except when I want to change some preferences, I've found that I can only view Preferences, but I cannot change it.
-
XP SP3 toolbar retains the symbol in Home and Back areas, Win7 now has the words instead. Other areas seem to do the same. Both work properly. Another problem which may be relevant is that the appearance of my ISP website front page on XP has not bee
-
Missing Images when Automating Web Gallery in CS3
HI I'm new so please be kind! I am trying to automate a web gallery in Photoshop CS3 but every time I run it it misses one image. I have renamed the image to no avail.Its a jpeg like all the others - nothing at all outstanding about it. I have purged
-
Wifi, Arsenal , doesn't work.
Yesterday at Arsenal i pulled out my 3Giphone, hoping to use the public arsenal WIFI. it came up with a login, and said to get vouchers I had to go to the press office ?! yet the guy infront of me, suddenly used his 3G and he got immediate access, I