Elements 8 install problem, error 1402

Hi
First time user here. I just purchased Elements 8 and during the install I get an error 1402. HKEY_LOCAL_Machine\Software\Classes\.jp2\OpenWidthList. Does any one have instructions on solving this or able to point me in the right direction. I'm reluctant to start poking around the register unless I have to.
Thanks in advance.

Can you please go through a similar tech note which is released for CS products and follow the steps mentioned in it and then try to install PSE again?
http://kb2.adobe.com/cps/404/kb404622.html#main_Set%20permissions
Regards,
Ankush

Similar Messages

ITunes6 and QT7 Installation Problems (Error 1402)

I have had many problems since trying to install iTunes 6 and QT7. I was getting error message-3, so I tried to download the stand alone QT7, as these pages have suggested. I received the following error message when I tried this:
"Error 1402. Could not open key: HKEYLOCALMACHINE\SOFTWARE\Applce Computer, INc.\QuickTime\ActiveX. Verify that you have sufficient access to that key, or contact your support personnel."
I clicked OK and the following message came up:
"Error:-1603 Fatal error during installation. Consult Windows Installer Help (MSI.chm) or MSDN for more information."
How can I access the HKEY... listed above to correct whatever needs to be corrected so that I can regain my iTunes?
Thanks for all suggestions!

Hi Theresa,
After much trial and error, I think that I found a solution. Try this:
I must say that I am not a pc wizard and I don't know the technical reasons for why the following worked, it just did! So if there are any pc geeks out there, be sure to chime in. Anyway, this is what I did. First uninstall QuickTime if you do have it on your pc. If not, just go to the next step:
Go to START, then RUN. Type in regedit and then click OK. Your REGISTRY EDITOR should open. You should see HKEYLOCALMACHINE in the scroll down menu on the left, with a small box to its left. Make sure that the inside of the box has a negative sign - this will open up the next set of subfolders. Next, make sure that the subfolder, SOFTWARE, has a negative sign in the small box to its left. Next, make sure that there is a negative sign in the box next to the subfolder entitled, Apple Computer, Inc. You'll see at least three subfolders: iPod, iTunes and QuickTime. Click once on the QuickTime folder until it is highlighted and then delete it. You will be asked if you want to delete QuickTime and its subfolders. Click ok and then close out the Registry Editor.
Next, download the stand alone QuickTime 7 at this link (you may have to cut and paste this link to open this website):
http://www.apple.com/quicktime/download/standalone.html
When you download the stand alone QT7, you may get a couple of error messages (I did), but if you repeatedly click ok (like I did), the QT7 player should load with no problems (like it did for me).
Again, I am no pc geek, but this worked for me and I have gained access to iTunes6 (with video capacity) and my complete library is intact. Nothing like trial and error!! Good luck -- I hope this works for you!

Install problem Error with Z drive

Our IT guys configure our machines with a Z drive as a network share. Any ideas how to resolve the conflict with PE9 install.
Thanks
David

I did not pick the Z drive for install. I always pick the C drive if given the option. But PE9 just went to work on its own and told me it could not install to the Z drive... there is a known issue posted here along these lines, however, so I think Adobe is on to it... of course i had to install as a trial version on a second machine to test the disk burning...then I have to solve the install problem, so I can install the license on the machine with the install problem.... all a big catch 22. Here's the link on the install issue... I get the 1327 invalid drive error:
http://kb2.adobe.com/cps/404/kb404946.html
Thanks
David

Elements 13 and Premier Elements 13 install problems

I downloaded (after purchasing) both Elements 13 and Premier Elements 13. When I ran the installer it prompted me whether I purchased or a trial. I chose purchase and then it asked me to sign in, which I did using prper credentials and the application just sat and spun around for 20 minutes doing nothing... reslt I could not install either product. Please help. Thanks.

restart you computer and retry installing.
here's the installation procedure (obviously skipping the part about inserting a disc) Photoshop Elements Help | Install Photoshop Elements from a disk
and if you cannot connect with adobe.com during sign in, Sign in, activation, or connection errors | CS5.5 and later

Photoshop elements 12 install problem

In error I unintalled photoshop elements and now having severe problem with reinstalling. I keep getting different error messages with I install the download. I just bought it Nov 10, 2013. I need help!.

Windows or Mac?

Elements 12 Install problems

I purchased Elements 12 from the trial version and have been trying to download and install for a week now. I have encountered errors about the files being downloaded to seperate areas to files being unable to be unzipped and am currently getting halfway through the install wizard when the next box says "Program Maintenance" "Remove Adobe Photoshop Elements 12 from your computer" "Uninstall Options, remove preferences" Please help.

Hi Musicforfun,
Which OS are you using? Did you simply copy the installer files from the PC to laptop or have you downloaded the software?
Please redownload the software on the latop and install.

CC Install problem: Error code 1000

I'm having trouble installing the Creative Cloud app. I get an error code 1000 message. Can anyone help please? (using Windows 7).

Hi Rajshree
Thanks for replying so promptly. Yes I had a look at that document but unfortunately it didn't solve my problem.
I suspected it had something to do with my machine as our organisation (a university) really locks down our machines so we can't download stuff easily.
After trying a few things what finally worked was creating a 'temp' folder in C Drive and putting the .exe file in that. Then I opened the file by right clicking and selecting 'run as administrator'. This worked (as I have administrator access).
Best wishes,
Silvia

Install Problem "Error: -48 The operation could not be completed... "

I am unable to install the "Take Picture Action Installer" from http://automator.us/downloads.html#1026
The error message is "Error: -48. The operation could not be completed because there is already an item with that name."
However I created a test user on the system and was able to do the install there just fine. Anyone know how I could fix the problem?
Thanks

Hi Aaton
I have not had a problem with that download (since your post)
There is an Automator "Take Picture" action which is owned by the system (Macintosh HD/System/Library/Automator/) which appears under the Image Capture library
The .zip file which you downloaded should go into Your user name/Library/Automator/ and is named "NYHTPROD-Take Picture.action" and appears under the Photo Booth library. It says that is the destination in the panel when you unzip the file
Suggest you have a look around those libraries and check things are as they should be then try again
chris

Photoshop Elements 6 Install Problem

I just got PSE 6 Mac Version for my iMac and I have tried installing it a few times and it won't work. It installs the shared files (Bridge CS3, Help Viewer, and Stock Photo CS3) but after taking about 30 minutes for the installation, it doesn't install actual photoshop. On the last screen of the installation it says Error with installation of Adobe Photoshop Elements, but doesn't give a reason why. Does anyone know how to fix this and install the actual program? I already tried making a new admin id and installing it on that in case something on my id was interfering. PLEASE HELP!

Hi Frank Land;
Ages ago when I first decided to get use Adobe products, I started off with demo software. When my real software finally arrived I deleted the demo software and then attempted to install the new. Nothing would install at all. I called Adobe support and their solution was to send me new media which worked as well as the original, not at all.
Finally on the Adobe forum one of the user there suggested a script that goes through your system and removes all of the bit and pieces that Adobe has installed throughout your system. Once I ran the script, everything installed like a champ.
This was a very long time ago and I can no longer find the script on my system. Maybe if you go to the Adobe forums and ask around for cleanup script that same user might be able to help you also.
Allan

Photoshop Elements 11 install problem

Hi, I've just downloaded Premier Elements 11 and Photoshop 11 to my PC, and run the installer. Photoshop Elements did not appear on my program list. When I found the Photoshop 11 .exe file by searching and ran it, it takes me to the screen where you choose between organiser and editor. But if I click on photo editor, nothing happens. And if I try to edit a photo from Premier Elements, it says photoshop is not installed. Any ideas? Many thanks

Hi DougalScott1,
If you don't see Photoshop installed on your systme please try redownloading the package and installing it again.
Did you encounter any errors during installation?
Have you checked that your computer meets the minimum system requirements?

Photoshop CS2/Elements 4 install problems!

This has been bugging me since I got both programs; whenever I attempt to install them, when it tries to install "shared items", it says a "required file is missing", and then tells me to restart the installation. I have no idea what this "required" file is, all I know is that no matter how many times I try to install either Elements or CS2, I get the same problem.
Has anyone else had this problem, and if so, what's the missing required file?
Thanks in advance

In as much as the two applications are third party you might want to post over in the Adobe forum support web site. What required file is missing?

Dreamweaver CS4 install problem, error code 1603

Hi!
I have for some weeks i have download home the trial of Deamweaver CS4 and it works and i was happy..
A few days later i remove the program from my computer..
Now i will install on my computer but it not works, it come upp a error message 1603..
I have all the adobe program install on my computer and i will install DW CS4 but it not works!
And it is a Windows vista computer..
Thanks for the help!
//Emil

Is it the first time installation of the master collection on this machine or you uninstaaled and re-instaled it once before, and now when re-installing facing this problem.

SCSM 2012 R2 Install problems (Error -2147467259 / 26203)

Having problems installing Service Manager 2012 R2. I am trying to install the SM Management Server onto one box already with SCCM 2012 SP1 installed. The SQL server is on a different machine. Sort of like this:
Machine1: SCCM & SCSM (trying to install)
Machine2: SQL Server 2008 R2 SP1
Anyway, the installer copies all the files and creates the database and tables fine, but when it gets to "ExecuteSqlStrings" in the process, it starts to roll back.
MSI (s) (B0:5C) [12:54:20:789]: Executing op: ActionStart(Name=ExecuteSqlStrings,Description=Executing SQL Strings,)
MSI (s) (B0:5C) [12:54:20:794]: Executing op: CustomActionSchedule(Action=ExecuteSqlStrings,ActionType=25601,Source=BinaryData,Target=**********,CustomActionData=**********)
MSI (s) (B0:C0) [12:54:20:835]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI9873.tmp, Entrypoint: ExecuteSqlStrings
ExecuteSqlStrings: Entering ExecuteSqlStrings in C:\Windows\Installer\MSI9873.tmp, version 3.5.2519.0
ExecuteSqlStrings: Error 0x80004005: failed to connect to database: 'ServiceManager'
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 3728 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 5592 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 4904 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 5256 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 4444 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 556 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 5068 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 4492 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 6036 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 3824 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 1056 could not be cancelled. Error: 1168
MSI (s) (B0:68) [12:54:37:391]: I/O on thread 5824 could not be cancelled. Error: 1168
MSI (s) (B0!BC) [12:54:37:392]: Product: Microsoft System Center 2012 R2 Service Manager -- Error 26203. Failed to connect to SQL database. (-2147467259 ServiceManager )
Error 26203. Failed to connect to SQL database. (-2147467259 ServiceManager )
CustomAction ExecuteSqlStrings returned actual error code 1602 (note this may not be 100% accurate if translation happened inside sandbox)
I have tried to install SQL Server 2008 R2 Sp2 locally and tried to install it to that but that didn't work either.
In the sql configuration on machine2, the TCP/IP port is open on port 1433 for SQL.
Edit 1: Downloaded and tried Service Manager 2012 SP1 instead of 2012 R2. Still same problem

Well after adding users to groups, I appear to have got past this hurdle! I added the domain admin, SCSM service account and SCSM machine account to:
SQL server's local admins group
SQL server user group (in local users & groups)
DCOM user group
That feeling of relief when you get past "Create database"

Solution to Elements 6 install problem !

Like many other people on this forum, I was unable to install Photoshop Elements 6 on my mac. I had already installed a trial version 6 successfully then gone to the web store to buy an upgrade. After paying my US$70 and getting a serial number, I found that the program did not accept my serial number ! After reading through all the the other posts on the web, I uninstalled, reinstalled, ran the cs3clean script, created a new admin account, tried everything and still couldn't activate the program. Contacted Adobe's online customer support who closed the case after telling me to call the telephone support but before ascertaining I had found a solution.
Finally, I discovered the problem - despite what the instructions tell you, you cannot just activate a trial program. I had to uninstall the trial, download a new installer from the Adobe account, and then use that one to install. I had previously been using the trial installer - which doesn't say "trial" anywhere - and which repeatedly refused to accept my serial number. The contents look exactly the same as the good installer, except that the disk image has "TB" in its name, as in PSE_6.0_MAC_TB_WWEFGJ.dmg vs PSE_6.0_MAC_WWEFGJ.DMG.
Most publishers use the same installer for both their trial and full versions, but if Adobe wants to be different, OK, it should just make it clear that the trial cannot actually be activated even if you enter a valid serial number ! The interface for the two look exactly the same, and the trial has a splash screen asking you to enter a serial number, except that it just doesn't work !
Overall, a very bad experience. If Adobe were not the only alternative to iPhoto/Aperture for editing raw, I would not have bought this program.
http://stngiam.wordpress.com/2009/01/08/installing-photoshop-elements/

Well, there are so many other people reporting problems installing PSE that I just tried all the other solutions that were mentioned. I don't think any other thread mentioned the fact that the trial installer and full installer are actually different files ! All the other discussions were on how to properly uninstall the old version. My probem was that I hadn't deleted the trial installer and I kept clicking that image instead of the new installer which was saved in another folder.
I mean, everyone else uses the same disk image for trial and full versions. Who would have thought Adobe would make you download a 1.3GB file twice ? After mounting the images, both installer discs look exactly the same, right down to the version number of the setup.app application. If I hadn't noticed the TB in the file name of the trial disk image, I would never even have realized that they are actually different.
Are there any circumstances in which a trial can actually be activated ? If not, why does Adobe even leave the serial number dialog in there ?

Installing Problem error tn_19166

For some reason flash players install went wrong, so i
uninstalled it and went to re-install it. it came up with this
error
"Failed to install
for troubleshooting tips, please see
http://www.adobe.com/go/tn_19166
i have tried all the parts suggested on this site, i have
tried deleting as many flash player reg edits i can see but still
having no luck. any chance anyone has any good ideas on where to go
next.

Having the same problem on a Dell laptop did you every figure
out how to fix this

Elements 8 install problem, error 1402

Similar Messages

Maybe you are looking for