Elements 8 Organiser won't load Photoshop CS5 as external editor

For some years I've succesfully used Photoshop CS2 with Elements (various versions) Organiser as my photo file manager.  The Organiser allowed me to select Photoshop as the external editor and subsequently accepted/managed the edited photos from Photoshop when I closed the file there.  (I prefer the facilities of Organiser to those of Bridge; and other folk in the household prefer Elements Editor).
I recently upgraded from Photoshop CS2 to CS5 64bit.  Initially Elements 8 Organiser (which is 32bit) continued to call up Photoshop (CS5) as the external editor but has now ceased to do so.  There is still an option in Organiser's dropdown EDIT list to "Edit in Photoshop" and any thumbnails selected in the Organiser get the "being edited" label applied if I select the "Edit with Photoshop" option.  However, Photoshop does not open;  or, if I have Photoshop open already, the photos selected in Organiser do not appear in the Photoshop workspace for editing.
I cannot, either, find the "close external edit" option in Organiser. When I eventually close Organiser, it warns that I will lose any editing done with the external editor to those photos it thinks it has handed to Photoshop, even though there has not been any handover in fact.
I can chose, in Organiser, to edit the very same photos with Elements Editor, even though Organiser appears to think that they are currently being edited by Photoshop.  If I do edit such a photo in Elements Editor then close it, the Organiser becomes happy and forgets it thought Photoshop was involved at all.
Is there some switch in a config file somewhere that I can throw to get the Organiser to actually call up Photoshop and hand it the file(s)?  Or is this just an Adobe glitch?  Any help or clues would be much appreciated.
Lataxe

Graham,
I have tried to persuade Elements Organiser to reconsider Photoshop as an external editor by going to the "Editing" section of Elements Preferences dialogues and specifying Photoshop.exe.  However, no matter which version of Photoshop.exe I point at (64bit CS5, 32bit CS5 or even the old 32bit CS2) Elements tells me that it automatically already has Photoshop as an external editor and I don't need to specify it as such.
On trying to exit the Preferences/Editing dialogue, Elements then pops up another dialogue box that tells me that "The path you chose for the external editing application is invalid.  Please correct the path or choose another external editor".  I need to uncheck the "Use a supplementary editing application" to stop this box re-popping.
The Elements EDIT drop down menu still shows Photoshop as an available editing application.  However, as described in the original post, Photoshop does not load or pick up any file specified for Photoshop editing within Elements Organiser.
I've also tried resetting Elements Organiser Preferences to their default.  This does not make any difference to the problem either.  There is an Organiser glitch I think.  I am begining to think it will need a Registry fix ..... but of what I have no real idea; and it isn't a good idea to mess with the Registry in a haphazard way.
Perhaps I should try a reload of Elements from scratch, after saving my Catalogue file somewhere safe?

Similar Messages

  • Photoshop CS5, primary external editor

    Well, I'm going to try this again. I posted the question once before, but nobody answered. I have tried to search but haven't found what I need. And, admittedly, I haven't paid attention when it has been answered in the past because I didn't think it would never affect me. I have been using Photoshop CS3 along with my Lightroom 3. No problems, no complaints. But now I'm going to move to Photoshop CS5. Consequently the question: should I just uninstall Lightroom and then install Photoshop CS5 followed by reinstalling Lightroom? I want CS5 to be the primary external editor. Photoshop CS3 will still be on my computer. Or, I guess the easiest question is, what is the simplest way to have Lightroom see Photoshop CS5 as the primary external editor? I apologize for having to ask this question.

    Typically, the last installed Adobe editing application will take precedence, although Windows XP can misbehave. Therefore, install CS5 after Lr.

  • IPhoto 11 using Photoshop CS5 as external editor

    I set the preference in iPhoto to use PS as external editor. It fires up PS when I click on "Edit" after bringing up the photo. I make my edits and hit save, then close the photo & minimize PS. iPhoto automatically makes a duplicate with the edits, which I can then upload to MobileMe & Facebook. However...once I shut down iPhoto, the duplicate edited photo disappears next time I fire up iPhoto. The thumbnail continues to show, edits and all....but when I click on it, I get the black box and exclamation point (no verbiage). I was able to download the edited photo from Facebook to my desktop, so I know the photo was saved into iPhoto at the time the edit was performed....but everything except the useless thumbnail disappears once I close. I cannot locate any info that will help.....anyone?

    What you're experiencing is a bug with iPhoto 11. See my post in these topics: Re: iPhoto 11 bug when using external editor (Photoshop Elements) and Re: Editing in Photoshop.
    Be sure to report it to Apple via http://www.apple.com/feedback/iphoto.html. The more it gets reported the more likely a fix will be issued.

  • Elements 8 Organiser will not load Photoshop as External Editor

    For some years I've succesfully used Photoshop CS2 with Elements (various versions) Organiser as my photo file manager.  The Organiser allowed me to select Photoshop as the external editor and subsequently accepted/managed the edited photos from Photoshop when I closed the file there.  (I prefer the facilities of Organiser to those of Bridge; and other folk in the household prefer Elements Editor).
    I recently upgraded from Photoshop CS2 to CS5 64bit.  Initially Elements 8 Organiser (which is 32bit) continued to call up Photoshop (CS5) as the external editor but has now ceased to do so.  There is still an option in Organiser's dropdown EDIT list to "Edit in Photoshop" and any thumbnails selected in the Organiser get the "being edited" label applied if I select the "Edit with Photoshop" option.  However, Photoshop does not open;  or, if I have Photoshop open already, the photos selected in Organiser do not appear in the Photoshop workspace for editing.
    I cannot, either, find the "close external edit" option in Organiser. When I eventually close Organiser, it warns that I will lose any editing done with the external editor to those photos it thinks it has handed to Photoshop, even though there has not been any handover in fact.
    I can chose, in Organiser, to edit the very same photos with Elements Editor, even though Organiser appears to think that they are currently being edited by Photoshop.  If I do edit such a photo in Elements Editor then close it, the Organiser becomes happy and forgets it thought Photoshop was involved at all.
    Is there some switch in a config file somewhere that I can throw to get the Organiser to actually call up Photoshop and hand it the file(s)?  Or is this just an Adobe glitch?  Any help or clues would be much appreciated.
    Lataxe
    NB  Also posted in the Photoshop CS5 forum.

    Graham,
    I have tried to persuade Elements Organiser to reconsider Photoshop as an external editor by going to the "Editing" section of Elements Preferences dialogues and specifying Photoshop.exe.  However, no matter which version of Photoshop.exe I point at (64bit CS5, 32bit CS5 or even the old 32bit CS2) Elements tells me that it automatically already has Photoshop as an external editor and I don't need to specify it as such.
    On trying to exit the Preferences/Editing dialogue, Elements then pops up another dialogue box that tells me that "The path you chose for the external editing application is invalid.  Please correct the path or choose another external editor".  I need to uncheck the "Use a supplementary editing application" to stop this box re-popping.
    The Elements EDIT drop down menu still shows Photoshop as an available editing application.  However, as described in the original post, Photoshop does not load or pick up any file specified for Photoshop editing within Elements Organiser.
    I've also tried resetting Elements Organiser Preferences to their default.  This does not make any difference to the problem either.  There is an Organiser glitch I think.  I am begining to think it will need a Registry fix ..... but of what I have no real idea; and it isn't a good idea to mess with the Registry in a haphazard way.
    Perhaps I should try a reload of Elements from scratch, after saving my Catalogue file somewhere safe?

  • Photoshop elements 12 won't load up on my PC. The first time I try to load it up I get a large egg timer, which lasts about 3 seconds. The programme then closes and if I try to load it again I get the circular icon which spins for 1 second and disappears.

    Photoshop elements 12 won't load up on my PC. The first time I try to load it up I get a large egg timer, which lasts about 3 seconds. The programme then closes and if I try to load it again I get the circular icon which spins for 1 second and disappears. I've tried rebooting several times but nothing happens. Please help!

    Hi,
    Please try resetting preferences?
    On Windows: Goto %appdata%\Adobe\Elements Organizer\12.0\Organizer folder and rename the files “psa.prf” (to say psa_old.prf) and “status.dat” (to say status_old.dat).
    Try launching Organizer and see if it launches fine.
    Thanks
    Andaleeb

  • Help! Premiere Elements 7 won't load project

    Premiere elements 7  won't load my project.  Icon just spins - for about 10 minutes - then it freezes.  Figures that I am so close to finishing!!!  What are my options?  Can I copy the project and open on another computer?  Can I download a newer version of Pre and upload the unifinshed project??  Any help is greatly appreciated!!

    Welcome to the forum.
    Unfortunately, PrE does not offer that many options, if a Project goes "off."
    However, these would be my first steps, and pretty much in this order:
    Go to the PrE AutoSaves, and change the View to Details, so you can see the Dates/Times. Try Opening the very latest one. Note: if you have not changed the default, there should be five AutoSave files, and they should be located in the PrE AutoSave folder, in the Project's heirarchy. You want the latest one, not the one with the highest increment. AutoSave 03 could be newer, than AutoSave 05.
    If that does not work, then try this - Move your Assets to a new location. Then, Open your original Project. As it loads, you should be presented with "Where is file _____?" and that is what you want.Here is the tricky part. If you have many Assets, and hopefully they are in the same folder, or a few folders, and not spread around the system. I would move all Video Assets to a Video folder, all stills to a Stills folder, all Audio to an Audio folder, etc. as you want to isolate things. When presented with the "Where is file ____?" navigate to the folder with that file, and locate it. PrE will then relink to all used Assets in that folder. This is why I would segregate Assets by type, to isolate the problem, if possible. If all of your Video files load fine, you will get a "Where is file ____?" for the stills, or the music, and repeat. If the Project fails on one Asset type, then you have located the bad Asset by type, and can repeat the exercise, by segregating each file in that Asset type, to a unique folder, navigating to each folder, when prompted, until you find the bad Asset.
    In the tests above, never do a Save, but only a Save_As, so as to not overwrite the original PREL file.
    Good luck, and hope that it is a bad Asset, and nothing more.
    Hunt

  • Photoshop and elements 13  Working in iPhoto Want to edit image using photoshop elements Did the following  IPhoto Preferences Advanced Edit Photos: In drop down menu chose in Photoshop Elements  Also control click and chose edit in external editor  Drop

    Photoshop and elements 13
    Working in iPhoto
    Want to edit image using photoshop elements
    Did the following
    IPhoto>Preferences>Advanced>Edit Photos: In drop down menu chose in Photoshop Elements
    Also control click and chose edit in external editor
    Drop down menu edit photos in external program>photoshop Elements
    Go to to the image I'm working on  --- selected the image, the clicked on edit. When nothing happened I double clicked the image. Still elements didn't open. Then I opened the Elements editor, went back to iphoto and tried the entire process again. the photo still didn't open on Elements 13 for editing.
    I have 3 Elements 13 books as well as looked on line--all my references say the exact same thing ---- iPhoto>Preferences>advanced>edit in external program>photoshop Elements
    I uninstalled and reinstalled both iPhoto as well as Elements.
    I spoke with application technical support.  There appears to be nothing wrong with my copy of iPhoto.  However there is no support from Adobe.  I waited for over 1.5 hours for chat support several days ago, and finally gave up.

    You are probably choosing the obvious file rather than the correct file as the PSE editor. The actual editor is hidden away inside the Support Files folder. The PSE file at the top level of the PSE folder in Applications is just an alias for the welcome screen and what you're describing is exactly what happens when you choose that. You want this one:

  • Photoshop Elements12 as external editor for iPhoto

    How do I get IPhoto to use Photoshop Elements12 as external editor, when I can not select "Application" under the advance setting, as suggested. It shows PSE12, but the photo's do not open up in that application. The application opens, with no photo. What needs to be changed, and how do I do it?

    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note 1: screenshots are from PSE 10
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • Lightroom 1.2 has lost Photoshop CS3 as external editor

    In Lightroom 1 I used Photoshop CS2 as external editor and lightroom has found it with the first choice of external editors.
    In Lightroom 1.1 I used Photoshop CS3 as external editor and lightroom has also found CS3 in the first choice of external editors. CS2 was deinstalled.
    Now I have Lightroom 1.2 and this version doesn't automatically find cs3. I have only installed lightroom 1.2 and have nothing done with the installation of cs3.
    How can I solve the problem, because I want to have two external editors?
    Achim Guhr
    Germany

    Try the following link. The upgrade to 1.2 lost track of CS3 for me too. I fixed it by editing the registry as outlined in the article.
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401629&sliceId=1

  • Photoshop Elements 10 won't load

    Hi
    I've installed Photoshop Elements 10.  When I try to load the program it seems to load, but as soon as it opens it shuts down again.  After this has happened once, it won't load at all unless I restart my computer.  I've re-installed the program multiple times, but it hasn't made any difference.
    Can you help?

    I'm running Windows 7 Professional on an Alienware 14X.  Its got an i7 processor and 16GB RAM.  It works if I load from the editor, but not if I try and load any other way.

  • Photoshop elements 12 won't load on 2nd computer

    Got PE12 for Christmas and have loaded it on desktop (for home use) and am trying to load it on laptop (for travel use).  Won't load.  Took multiple attempts (5) to finally get it to load on desktop.

    Intel Core 2 Processer - 2.2 GHz, 4 GB Memory, NVidia GeForce 8600 graphics, Windows 7 on both computer.  Both Desktop and Laptop have Photoshop CS 5 installed and are usable.
    Got out external DVD drive and connected it to 2 different USB ports.  Progress bar at top showed that it was reading the drive until it got to just of 50% and then message 'Please insert disk in DVD drive'
    Think there is a problem with the disk.  FYI, the serial number for the software is <removed>.  I have not registered this software after installing it on the desktop, rather wanted to get it installed on both first.

  • Extentions won't load in CS5

    When I'm in photoshop cs5, and click on mini-bridge, it says it can't load.  Same with any other extenions I have. 
    I've uninstalled the program.  Used MAC keeper, which is supposed to remove everything.  But I reinstall CS5, said it was installed, even though I thought I'd removed it, and the same thing is happening.
    I believe I've tried everything!  Turning things on and off, reloading extentions etc. 
    I can't find any info on this.  Please Help
    I'm running on a MacBook Pro, Lion.
    Tamara

    As this is a photoshop issue, perhaps the Photoshop forum would be a better place to seek answers.

  • Windows 7 operating system won't load Photoshop CS2?

    I've purchase a new computer with Windows 7 operating system. My photshop CS2 won't load. I've
    tried adobe support. They said I have to upgrade to Photoshop 3 or 4 unless you have a s
    olution here.  If you don't can I just purchase the upgrade and if so, how can I get the upgrade
    on my new computer if the originals won't load.
    JW

    Hi, and welcome to Apple Discussions.
    Try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
    If this works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
    Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
    See if you are able to do a little hard drive maintenance to help things out. If Safe Mode doesn't work for you, post back and we will explore other options.

  • Encore CS5.5 loads Photoshop CS5

    I have both Production Premium CS5 and CS5.5 installed. When I go to Photoshop in Encore CS5.5, Encore loads PS CS5 not CS5.5. I could not find anything preferance to the change the target PS. How can I change Encore to load PS CS5.5? Ed

    >Jeff
    The file association in windows was set to PS 12.0.4. I am surprised it did not get updated with the rest of the CS5 PP apps. Changing it solved the problem. Many thanks.
    Ed

  • Premiere Elements 8 won't load recently saved project

    I'm using Adobe Premiere Elements 8 to create a highlight video.  I made two videos last year and didn't have this problem but this video is slightly longer.  About twenty minutes total consisting of approximately 100 video clips.  I've added one more group of clips and not when I try to load the saved project I just get a gray blank screen.  The load message finishes but nothing appears.  The drop down menus are mostly still grayed out.  No good selections except to press load project again.  This causes a system error that shuts down the application.  Any tips or tricks are appreciated.
    Thanks,
    Dave Flick

    Bill, here is the good news.
    I updated the Quick Time like you suggested but no help.  I updated the video driver but no help.  I disabled the hardware acceleration but no help.  During this time I realized the problem started after I upgraded McAfee.  I remembered the new McAfee Real Time scanning effected my Outlook software.  So I disabled the McAfee Real Time scanning and then Premiere Elements 8 would successfully load my saved project.  What a relief.  I went back and Turned On the McAfee Real Time scanning but changed the setting to only scan programs and documents, not all files as previously set.  I'm back in business and really appreciate your help.  Thanks a million.
    Dave Flick

Maybe you are looking for