Elements 9 and minimizing to the bin

I just upgraded from Elements 6 to version 9. I have my options set to float in windows, however, unlike in version 6, when I minimize a file, it doesn't disappear to the bin, it adds a little box along the bottom with the beggining of the file name and buttons for restoring, maximizing, or closing. It doesn't take many files to be minimized and it starts covering up the file bin at the bottom. I have to minimize them because when open they cover the bin, too. In Elements 6, when I would minimize, they'd disappear until I double clicked on them in the bin again and when files were open they never covered the bin up. What gives? Any way I can change this? I really hope so, this is driving me crazy; I certainly can't find it anywhere.
Thanks

download the trial PSE 9 from the below link and use your serial number to serialize it:-
http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

Similar Messages

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

Hello, I lost the serial number of Photoshop Elements 6 and I lost the box.

Hello, I lost the serial number of Photoshop Elements 6 and I lost the box. How can I do thanks for the help.

Did you ever install and register it? If so, you can find the serial number by going to the main page of adobe.com and looking for My Adobe (it was up by the search box on the upper right the last time I looked, but it moves around). Work through the links there and you can retrieve it from adobe's records. You might want to consider writing it on the disc itself for future reference.

Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

I have elements 11 and I did the 30 day trial of elements 12. When the trial expired it caused problems with my elements 11. Nothing opens correctly, some not at all and I can't get help?

Please help me. I am so disappointed in Adobe. I was planning on upgrading to 12 after the trial period but was unsure still. The problem I am having now is that my PSE 11 Organizer is off the grid. When I right click on a file and go to "open With", it only offers me the option to use Premiere Elements and not Photoshop. I found the .exe@ file for Photoshop Elements 11 and created a shortcut to my task bar in order to get to it. That won't work on my organizer though. Should I just uninstall and reinstall the whole thing? I'm on Windows 8.1. I refuse to upgrade to 12 after being refused any support considering it was the trial they encouraged me to try that caused my problem.If I have to reinstall everything with it impact the projects I've created?

wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Photoshop Elements 11 and 12 on the same device

I recently bought Photoshop Elements 11. Now I bought a new Canon EOS camera, that included Photoshop Lightroom 5 and Premiere Elements 12. My Problem now is. The DVD also contains Photoshop Elements 12 with access only to the organizer but not to the photo editor (there is no serial number). So now I have Photoshop Elements 12 but for editing Photos Photoshop Elements 11. Not very satisfying. How can I get a licence number for Photoshop Elements 12 without again buying the Software.

Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

I just bought Photoshop Elements 13 and cannot find the Magic Extractor. Where is it?

I watched a video online and thought this would be a really cool tool to have since I'm preparing images for Amazon and they require a white background on the main product photo. I thought buying Version 13 would be smarter than 12 or less as it would be more up-to-date, but I cannot find it! So frustrated and overwhelmed at this point.

Yes, the magic extractor has been removed from PSE12 and not reintroduced in PSE13.
Elements: Magic Extractor in version 12?

I am using elements 8 and have installed the latest RAW plug in, however I am still getting an error message when trying to open files. My camera (nikon d7100) shows as a supported camera. Any suggestions?

The plug in version is 6.2.0.29, which shows that is supports my camera.

Hi Sully172,
Please check the below link
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
It clearly states that D7100 requires a minimum camera raw version of 7.4
I would advise you to either use the camera raw dng converter or upgrade to Photoshop Elements 13.
Thanks

Editing iPhoto photos in Photoshop Elements 4--5+ photos in the bin?

Hi,
PSE4 is my preferred photo editor in iPhoto. When I attempt to edit/open more than 4 iPhoto photos at a time (which, given my preferred photo editor setting, automatically opens the photos for editing in PSE4), only a maximum of 4 photos appear at a time in the PSE4 Photo Bin. Why is this? I have opened many dozens of photos simultaneously in PSE4 before, all stored without a problem in the photo bin... Please help!
Thanks,
Maine

Maine
iPhoto will send no more than 4 pics at a time to an external editor. This is to avoid inexperienced users inadvertently opening their entire library in their editor. There is no way around this.
Regards
TD

Can i download and buy elements 11, and still get the cd shipped to me?

hi there,
i downloaded the trial version of photoshop 11, it quit after 24 hours...........
i am happy to buy it though......
can i download and pay for it, and get a serial...................
and then tomorrow when the office opens, i can call them to ship me the cd?
thank you,
george

gave up on the trial....
i ended up buying it at future shop for $119 this evening........... cheaper than buying it online and having it shipped.
had a bit of an issue when i installed it, it said the provided serial was wrong.........
i got online with adobe chat....... they are useless........ to the point where i asked for a supervisor... they said no...... i asked for the agents id number, and he said no.....
anyways, it's a long story..... but i finally ended up getting it working without them.........
thank you for all the suggestions.. this forum is worth 1000 of those guys on adobe online chat help,
i wont be going back there again, but ill be back here again,
thank you
gh

Thoughts about the bin window - bugs or features and workarounds...

Hi there,
I really have big toubles using the bin window. It is even worse in OSX.5 (the only thing I don't like with OSX.5 and Logic8!).
There are some Problems:
1. I can't move any audio-files to wherever I want them to without Logic is copying them back into the audio-folder by saving the song. The problem is that I want Logic to copy imported audio files into the audio-folder but if I change something manually Logic should remember that without working against me. So for example: I am bouncing a lot of audio into the bounce folder. In Logic 7 all the finished bounces were located there on the hard drive. Easy to find and to organize. But in Logic 8 they are moved to the audio-folder and I have to search very carefully which files I want to send to my client. That's the biggest source of trouble for me right now.
2. If I am making groups, Logic is sometimes copying even that audio-files back into the normal audio-folder. The problem here is: sometimes. I really have no idea what the problem is. Sometimes just some audiofiles are staying in the group (on the hd) for a couple of Logic-saves and then are moved back at the 10th save or something.
3. I am not able to organize my groups and audio files very well. So if I have group that always is shown on top of the bin window and I have a audio-bounce called "zoo" it is the last one in the list. Then I have to move it the whole way up to the group. That costs me about a half our per day. Way too much. There should be some kind of easier handling. For example a second window for groups or something. The next one is that I have to call the group something like 001AASFX or ZZZ_SFX so that I am able to find it fast enough in the finder. It was so much easier to go the bounce folder in Logic 7 days.
4. The hide-regions keycommand was unstable with OSX.4.10 but now with OSX.5 it is not working at all. If I choose a audiofile in the bin window and hit the standard keycommand for hiding regions just the region for that audiofile is hiding and instantly shown again. I want to have a shorter way to move my bounced files into the group that is the whole way up to the list's beginning.
So I wonder if that are new features or if it is really buggy. I am not able to work with that structure right now and with that kind of unstable location behavior. Are there any workarounds, tips, tricks? Is there anyone who feels like me? May I hope for a update?
That's it
Xcell
Message was edited by: Axel Rohrbach

Hey Jim,
thanks for the support. Seems to be something Apple has to work on. There are some posts and questions about the bin window in every forum I know but there is never a "this is not want we want and there are bugs" - thread. In fact the whole Logic 8 structure with the one-window-gui is great and works much better than I expected. So it is no general "what the **** are they doing"-thing
Nevertheless, is there a way to get this to apple? I don't know if they are aware of these problems and perhaps the testers are making music with one bounce and that's it. Just one file is not that difficult to handle, organize and to find. But there are other users working in different ways (like us I think).
@ David: I am sorry but you are wasting time and thread-space. If you don't say anything if you do not feel comfortable nothing will change. You are not able to let it rain in Austria (yet) but there are real guys working at apple and it's not a kind of wonder that there is logic at all. So am trying to discuss here something and hope for any reaction or attention and don't need any "go deeply into your self and you will find a way"-stuff. Thanks anyway to bring god back to that forum.
Xcell
Message was edited by: Axel Rohrbach

Getting Tag and value from the selected Xml element value

Hi All,
I have an xml file which i import to the Indesign CS3 .From the structure view , i drag and drop the root node on to the page. Now i select an xml value from the page. Now i need to get the element tag and value from the selected value.
For example
File Name : sample1.xml
<Root>
<employeeName> A</employeeName>
<employeeEmail>[email protected]</employeeEmail>
</Root>
Now i import this sample.xml in my indesign CS3 and from the structure view i drag the Root tag and drop it on the page.Now the values of the element tag are displayed.
Now i select "[email protected]" from the page and i have a menu "Get Selected XML" on clicking which i should get element tag with value.(i.e <employeeEmail>[email protected]</employeeEmail>)
How to go about it.?
Thanks
Sakthi

Hi Steve,
If you haven't already done so, I recommend posting this question in the LivCycle Forms forum.
Jared

Hi, i am having an issue with a basic motion scroll effect. I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me-, probably he didn't unde

Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki Lapan

Thank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!!

How can I import photos from iPhoto '09 to Elements Organizer 10 while keeping the tags attached?

I have spent a ridiculously long time tagging photos in my iPhotos but I would now like to transfer all my photos to Elements Organizer and preserve all the work I had done.
From Adobe's help website (http://help.adobe.com/en_US/elementsorganizer/using/WS73c05ee9864270ea-417df45c129593bfa05 -8000.html) it says I can import the tags along with the photos but does not explain how:
"Elements Organizer 10 supports importing photos, along with their associated captions, tags, and ratings, from iPhoto. You also have the option to import information such as events and albums to maintain the organization of your library"
When I follow the steps outlined on the website my photos are imported but there are no tags attached to them. I am particularly interested in keeping my facial tags but I suppose it would be useful to know how to keep other keyword tags and ratings as well.
There was a previous question put out on the forums similar to this but it was unresolved and the person decided to just leave everything in iPhoto. I really would prefer to transfer all my photos to Elements Organizer. I don't like the way iPhoto organizes photos but I had to deal with it for several years before I bought Elements Photoshop with built-in Organizer.
Please Please help!
Many thanks
D.M.

You don't import one library to another. Just copy the library from the iBook to the Pictures folder on shout new MacBook Pro. If you have another library already on the MBP rename it so you don't overwrite it with the old library.
Launch iPhoto with the Option key held down and select the newly copied library and let iPhoto convert it to the new version.
Do you have photos in the library on the new MacBook Pro that you want to combine with the older library?

Help With Adobe Photoshop Elements Download and Installation

I purchased Adobe Photoshop Elements yesterday and was sent the download link. I tried to download the product but one of the 2 files I need would not download and after a few attempts it blocked my access saying there were too many download attempts. Please help.

if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Elements 9 and minimizing to the bin

Similar Messages

Maybe you are looking for