Elements 9 and Youtube?

Hey guys, I started using elements 9 just today. I recorded a video with my webcam in my vaio pc, I used elements 9 to edit it. Until this point everything was ok, except for the fact that when I tried to put some words in it the computer went phut. But my biggest problem was the uploding to youtube. I tried for the first time to upload directly from elements, but it stop at the second step saying something about problems with connection. Then I tried to upload directly from youtube, but the site couldn't recognize the type of video and audio so it didn't upload it. Then I tried again with elements. Everything went ok, it took 20 minutes first, then around 50 minutes, then when it was says that he was connecting with youtube he started going very slowly and after like an hour it said that an error occurred so I should try again later.... Guys what should I do helllp! Oh and by the way my video was just like 8.30 minutes long...

I'm not sure what's up with your computer or your connection. But try creating the video and uploading it manually and see if it works.
http://forums.adobe.com/thread/623549?tstart=0

Similar Messages

  • I own both Photoshop Elements and Photoshop (the original editor).  I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop.  When I try to install Photoshop as a secondary editor in elements I get an error messa

    I own both Photoshop Elements and Photoshop (the original editor).  I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop.  When I try to install Photoshop as a secondary editor in elements I get an error message that I don't need to this because it is already supported on the edit menu and task bar.  I can not find any way to send images to Photoshop for editing - all I can do is send them to elements editor or the premier editor.  Can someone tell me how to send them to Photoshop?  Thanks!

    Hi,
    The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
    You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
    DNG  Converter 8.8
    Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
    Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
    Useful Tutorial
    http://www.youtube.com/watch?v=0bqGovpuihw
    Brian

  • Adobe premiere cs3 and youtube

    Hi Everyone,
    Please give me some input on how I can use adobe premiere cs3 to create videos for youtube.... specifically... the videos that I will be working on will contain all of the same basic elements...
    1. Still Images and Clip art only... no moving video... I want help with uploading the stills/clip art and also with timing who long each still with stay up individually....
    2. Speech bubbles (the kind used in comic strips) timed to pop in above above the heads of those people or characters in the stills and clip art... I want help with timing when the bubbles come in and with creating them and saving them so that in future videos i won't have to create them again...
    3. Voice over parts done by me to read the parts in the bubbles timed for comic effect... I want help with steps on how to do this...
    4. Music added throughout the video just below my voice overs... same as above...
    All of my videos will contain these elements... and I want to find an efficient way to set up adobe premiere the first time so that every time I go in to do my youtube videos in the future it will be just a matter of uploading the stills setting a time duration each still and the speach bubbles... reading the voice over, adding the music and then uploading it to youtube... I am new to the software and would appreciate any steps that could be give to help me accomplish these four goals...
    Thanks,
    John

    the music you liked was made by chris duncan (who comes to forums but has been busy so hasnt been around lately ).. called " when goblins frolick " ...perfect title for the music.
    probably should move this discussion to the lounge area cause it sorta has to do with learning some aspects of programs in general and certain techniques etc.. not really about cs3 and youtube per se...
    but anyway..moderators will do that if they want to...
    it is a little difficult at first to use photoshop to do what you want, and to use masks in cs3 or just fade graphics in and out and make them appear when wanted..move around etc...and also text issues ( sizes that show up OK on screen are usually pretty large ( pt ). But you'll find when you get past the initial learning part it will open up all sorts of very cool opportunity.. and freedom to do what you imagine...
    AE is also used for animation stuff but I dont use AE myself...
    if you search for animation tutorials using text baloons you may find some good one that walks you through the process...and maybe even you can find samples of things to download and experiment with on your computer.
    my advice is to go ahead and learn what you can and do your own graphics etc .. cause that will open up all kinds of cool things for you to do .. not only in animation things but other things too ...
    good luck !
    local library might have a good book on animation stuff using adobe products ( versions you have).. can usually search local libraries with computer at home...

  • Can't upload from premiere elements to youtube

    I'm trying to upload a 25 minute video to youtube. It says the following: "The video duration exceeds the maximum duration supported by the destination. Please reduce the duration of the video and try again."
    youtube supports videos of this size now.  How can I get past this?  Thanks!

    Thanks A.T.  So far the default setting are working just fine, but this is good info in case that changes.Jan
          From: A.T. Romano <[email protected]>
    To: Janice Yuvan <[email protected]>
    Sent: Saturday, May 2, 2015 11:30 AM
    Subject:  can't upload from premiere elements to youtube
    can't upload from premiere elements to youtube
    created by A.T. Romano in Premiere Elements - View the full discussionjanicey For your workaround, you have been pointed to Publish+Share/Computer/AVCHD with Presets = YouTube Widescreen HD.The default for that preset is 1280 x 720 @ 24 progressive frames per second with a bitrate of 8 Mbps (megabits per second). If you want other than that default setting, you can customize that preset to 1920 x 1080 @ 29.97 or 25 progressive frames as well under the Advanced Button Video tab of the preset. Determine if the bitrate needs adjustment and the file size is acceptable You might also want to explore using Presets = MP4 - H.264 1920 x 1080p30 (or 25 as appropriate) and customize the preset under the Advanced Button/Video Tab of the preset. Watch the file size. If you are OK with the 1280 x 720 for quality and file size, then please disregard the suggestion for this. If you are interested in the suggestion, do not hesitate to ask questions or ask for clarification if needed. ATR If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7505552#7505552 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7505552#7505552 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Premiere Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Android Razor~Premiere Elements 11~Youtube

    I have the Andriod Razor (Filmed in HD+1080p) and the video and audio looks great in Adobe premiere elements11 and on my camera, but when I convert it to either Adobe Flash or Quick time to upload on to Youtube or Facebook from Adobe Premiere elements 11 I have problems....
    Both the audio and video on Adobe Flash becomes irregular and at time unaudiable and when converting to Quiktime the video losses it's sharpness and clarity.
    My quest is to find the the best program, procedure and all of the compatible presettings to use for going from the Android Razor to Adobe Premiere elements to Youtube or Facebook?

    First, go to the Edit menu and make sure the Project Settings for your Premiere Elements project match your video specs (1080p).
    Then use Publish & Share/Computer/AVCHD with the YouTube HD preset to output yoru video. Should give you excellent results on YouTube and Facebook.

  • How to get the values of all elements and sub elements from  following xml

    how to get the values of all elements and sub elements from following xml...
    <?xml version="1.0" encoding="UTF-8" ?>
    <List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
    <TransactionID>TransactionID</TransactionID>
    <Match>
    <Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
    <List_Matched_Field>
    <FSFM_Matches>
    <NUMBER>NUMBER</NUMBER>
    <TERROR>TERROR</TERROR>
    <TU>TU</TU>
    <NAMEU>NAMEU</NAMEU>
    <DESCRIPT>DESCRIPT</DESCRIPT>
    <KODCR>KODCR</KODCR>
    <KODCN>KODCN</KODCN>
    <AMR>AMR</AMR>
    <ADDRESS>ADDRESS</ADDRESS>
    <SD>SD</SD>
    <RG>RG</RG>
    <ND>ND</ND>
    <VD>VD</VD>
    <GR>GR</GR>
    <YR>YR</YR>
    <MR>MR</MR>
    <CB_DATE>CB_DATE</CB_DATE>
    <CE_DATE>CE_DATE</CE_DATE>
    <DIRECTOR>DIRECTOR</DIRECTOR>
    <FOUNDER>FOUNDER</FOUNDER>
    <TERRTYPE>TERRTYPE</TERRTYPE>
    </FSFM_Matches>
    <OfacMatchDetails>
    <UID>UID</UID>
    <TITLE>TITLE</TITLE>
    <SDNTYPE>SDNTYPE</SDNTYPE>
    <REMARKS>REMARKS</REMARKS>
    <ID_UID>ID_UID</ID_UID>
    <IDTYPE>IDTYPE</IDTYPE>
    <IDNUMBER>IDNUMBER</IDNUMBER>
    <IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
    <ISSUEDATE>ISSUEDATE</ISSUEDATE>
    <EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
    <ADDRESS1>ADDRESS1</ADDRESS1>
    <ADDRESS2>ADDRESS2</ADDRESS2>
    <ADDRESS3>ADDRESS3</ADDRESS3>
    <CITY>CITY</CITY>
    <STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
    <POSTALCODE>POSTALCODE</POSTALCODE>
    <COUNTRY>COUNTRY</COUNTRY>
    </OfacMatchDetails>
    </List_Matched_Field>
    </Match>
    </List_AML_Finacle>

    avoid multi post
    http://forum.java.sun.com/thread.jspa?threadID=5249519

  • I just downloaded the new version of Firefox and now every site I used to use such as Facebook, Twitter, and Youtube show "This Connection Is Untrusted"

    I just downloaded the new version of Firefox and now every site I used to use such as Facebook, Twitter, and Youtube show "This Connection Is Untrusted". Even when I do accept the risks the site no longer looks the way it's looked for years. Twitter doesn't even give me the option to accept the risks at all and shows this error (Error code: sec_error_unknown_issuer). I've tried resetting Firefox, I've checked the time and date, and I've removed and added Firefox to see if that would work. Nothing seems to be working so I can see the sites the way they normally would be instead of "coded". Can anybody help me please?!!! Thanks

    ok, unfortunately the fiddler2.com issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
    <sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
    afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
    [[Troubleshoot Firefox issues caused by malware]]

  • I have just purchased photoshop elements and premiere package. I tried to download them but it tells me the serial numbers are inapplicable. I notice the platform says windows and I am using a mac book pro.  It didn't give me an option when purchasing. wh

    I purchased Photoshop Elements and Premiere package today.  I have been trying to download them but it tells me the serial numbers are inapplicable.  I am using a mac book pro and I have just noticed that the platform in my receipt says 'win" .  I don't remember being given an option for mac or windows  when purchasing.  what can i do now?

    Return, cancel, or exchange an Adobe order

  • Hello can some please help I am trying to watch my HBO go on my apple tv I have sound not picture. I can watch my iTunes videos and youtube so I know it works. it is working

    Hello can some please help I am trying to watch my HBO go on my apple tv I have sound no picture. I can watch my iTunes videos and youtube on my airplay with my ipad and everything is updated so I know it works. But not on HBO go, Max go, showtime go.

    What you want to do does not work with an iPd running iOS 5. See the screenshot.
    The latest update for HBO GO does allow for AirPlay on Apple TV - sound and video - but only on devices running iOS 6 and Apple TV running 5.1.1 or later - according to the app description.

  • What do i do with a very slow Photoshop Elements and Premiere Elements on a PC?

    I seem to be getting mixed opinions as to why my Adobe software gets so slow, despite efforts to avoid that, but my computer seems to be working just fine, it is only when in Adobe that the problems arise, like freezing, taking longer and longer periods of time to open the screen to edit a photo, or to compare two photos side by side.  Any process seems to take such a long time, and the freezing can last for several minutes, and then continue on.    I have had a computer person come to my house and examine my computer and though his knowledge of Photoshop is limited, he feels that it is NOT the computer but something with Adobe Photoshop.  I would tend to agree with him.   
    Several theories have been explained to me, such as Elements and Premiere Elements are a low end of the scale of Photoshop programs, so it is just not going to be able to process high definition large photos well and quickly.  Stating comments like i can only use 2 GB of my memory even though i have 8 GB, so unless i can use 64 bit this is what i have to deal with, and it is just a way for Photoshop to say you need to upgrade to the fancier programs.  I do not need fancier programs.  I am working hard to master these, and have accomplished 4 great blu rays in high definition thanks to recommendations from the Forum here, especially Steve with the help of his books. 
    Others say i need a solid state hard drive to solve the problem.  Others say the only way i will ever solve the problem is to switch to a MAC.  Others state is a mal-ware problem, but i have never had my hard drive so clean and uncluttered.  I supposedly have as good of PC as i could have as far as QUAD-core, 8GB memory, presently a 1 TB hard drive less than 1/2 full.   All suggestions involve big outlays of money, with no guarantee that things will be any better.  I have tried to contact different computer companies and computer 'nerds', and these are some of the suggestions, but no one really has a lot of knowledge of the Photoshop software. 
    I am thinking of adding an additional internal hard drive, but not sure that is going to help either.  Could i put all my Photoshop of the second hard drive, and might that speed things up? 
    Adobe is rather worthless in trying to get help from them.  I have spent hours on the phone waiting and then talking to someone who says they understand English but they do NOT understand the question i am asking, which becomes very frustrating with repeat phone calls.  I gave up yesterday trying to do that challenging experience yesterday after i had spent 3 times the amount of time they said i would need to wait to get a reply, and i was at work, and my free time had come to an end.  So i am hoping you guys can give me some clues of the best thing to do.
    Is it true that Photoshop Elements and Premiere Elements are just such a lower end program that trying to do things in high definition, with 2000x1500 photos, making them into a blu ray disc is a major challenge with a PC?  I wish i had a greater computer knowledge, but i have struggled to achieve my goal, but the speed of it all gets very frustrating, though it is possible. 
    Another question asked which i don't think exists, is whether there is a program that could clean up Photoshop, or are there some clues that could accomplish that and thereby speed things up.
    Would appreciate any suggestions anyone has.  I am in the middle of another project so now is probably not the best time to consider any major changes.  But any comments would be appreciated.
    Ron

      Premiere Elements 10 is now 64 bit, but not PSE10.
    Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
    Click image to enlarge
    Turn off face recognition and the auto-analyzer to improve performance.
    When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed.

  • Why does my computer create web connections to addresses in the Amazon, Google and Youtube range when I start Firefox?

    I think I already disabled all the updating functions, yet, SOMETIMES when I start Firefox, (with about:blank), my network monitor shows one to five connections to IP addresses mostly in the 74.125.225.x, 74.125.227.x, 74.125.228.x, and 72.21.x.x ranges. Those ranges include Google, Amazon, and Youtube.
    I use Kaspersky, and have scanned multiple times for malware, and even had their technical support look into my computer. They see no malware. It is the Kaspersky Network Monitor that revealed the problem.
    As I find them happening, I try to jot down the addresses, (quickly, because some of these connections only last a second or two), then add those to a firewall rule I created to try to combat the problem. Yet, next time I start, new addresses are "attacking". Of course, some get away, because I don't get the address jotted down before it goes away. At one point I used masking that ended up keeping me from Google and Youtube, so I have to add the addresses individually, and my block list in that one rule is 13 items long now. The only IPs not in those ranges are 23.5.251.27, and 173.194.46.5. Not sure where those go.
    I used to get attacked by addresses in the range that includes Amazon ... 72.21.x.x. I have a separate firewall rule for them that has 33 addresses being blocked.
    I should not have to do all that. Firefox should start and just sit there quietly until I start clicking or typing in it. This has been happening in Firefox versions going back to 11. May have gone on before that, but I wasn't tracking it then.
    Also, it doesn't always happen, or, more precisely, with addresses I have not already blocked, (because my only way to know it's happening is when the connections are allowed to be made). It does not always happen right after Firefox is up, but sometimes several minutes later. I have started Firefox and just sat and watched the network monitor without doing anything in Firefox, and have seen this happen up to 15 minutes after I start Firefox ... mostly just two or three minutes when there's a delay at all.

    Firefox does not do anything but sit on about:blank after I start it as long as I have a firewall rule enabled that completely blocks these subnets:
    74.125.222.0/24
    74.125.227.0/24
    74.125.228.0/24
    173.194.46.0/24
    173.194.115.0/24
    173.194.121.0/24
    64.233.171.0/24
    54.230.90.0/24
    54.230.88.0/24
    72.21.194.0/24
    72.21.195.0/24
    72.21.215.0/24
    207.171.163.0/24
    Otherwise, Fire fox creates connections to one to five addresses in those ranges. Note that there are more than 5 subnets above, but usually three connections satisfies whatever purpose these connections are being made for. If I had some links or whatever that is causing these connections, I would expect all of them would come up every time.
    Also, these connections do not start immediately upon starting Firefox, they wait up to 15 minutes to start ... fifteen minutes of just sitting idle ... no actions on my part that could possibly initiate them. Usually these start within three minutes. A typical ploy of malware is to wait until no one is looking, or the until there's a forest to put their tree in so it won't be noticed.
    While the above rules are in place, I do not have access to Amazon, Youtube, or Google, (or any of the various blog sites and services sponsored by Google, including Google Maps and Gmail). That list may not be complete, as I have other firewall rules in place that mainly block individual addresses.
    It seems to me as simple as; figure out who owns those subnets, and you have your bad guys. Then go after them.
    It's true that I have a bookmarks to Google, Gmail, and Youtube, but these are not "active" bookmarks nor RSS feeds. I have not voluntarily gone to Amazon on this computer.
    The traffic being transmitted is unknown. It is usually not extremely large amounts of data ... less than a meg, but I have seen close to a Gig transmitted out of my computer, and over 400 meg transmitted to my computer, when I was not paying attention to block the offender. Even if it's small amounts, things like cookies, path structures, configuration settings, histories, etc. do not involve a lot of data, but, to me, represent a security breach, if someone decides to look at them unsolicited by me, not unlike your landlord, mortgage holder, or neighborhood police officer walking into your home while you're not there, and taking pictures of, or simply inventorying your belongings.
    It is VERY much like some sort of backdoor malware. No malware is detected on my computer.
    I looked at the suggestion above for OS changes for logging HTTP activity, but the author neglected to include instructions for backing out these changes after using them. If this were to create more jewels in a drawer the thief has access to, reformatting and restoring my drive is not the kind of back out process I enjoy. Therefore it would be foolish to apply them. To me it would be like bungee diving with no bungee. Fun until you hit the bottom. Give me the bungee, let me make sure it's short enough, then I'll dive.

  • On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?

    On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • Facebook and YouTube app connection

    How do I reconnect the Facebook and YouTube apps to my internet, which is working fine, on my iPad air. The apps work fine on my 5c, but only recently started having network and connection issues.

    Hi, Jvc_11.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are experiencing internet issues with a couple third party applications.  I would need a little more information regarding how you are connecting to the internet and if the issue is present on other apps to provide a better answer.  However, this may be related to Wi-Fi connectivity.  I would recommend going through the steps in the article below.  
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Cheers,
    Jason H.

  • Facebook and youtube problems Nokia E5

    i can't log in facebook and browsing videos by youtube using the WLAN connection.
    facebook just keep waiting to log in and after all it fails to log in 
    and youtube just appear a screen with connecting and nothing happens 
    plz anyone help!
    web browsing is working good but i cant open some pages like facebook ,youtube , twitter by the web browser !!!!

    Go to ovi store if it's open & download the facebook apps its free you won't be needing the browser for that.
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • Safari and YouTube disappear in my iPod when I up date iOS 6, do I have to reset my iPod?

    Safari and YouTube disappear in my iPod when I up date iOS 6, do I have to reset my iPod?

    Youtube was removed by Apple in iOS 6. Safari should not be removed. Try restoring your iPod in iTunes. You should then get Safari back. Also, there is a Youtube app in the App Store. It's in the free section of the Top 25.

  • Safari and Youtube can't connect to server

    Safari and Youtube can't connect to server but I can use iTunes online store. Isn't that strange? Any ideas why?
    I use static ip-adresses on my home network with a WEP 128bit security. I have entered all configuration that I enter under tcp/ip properties on my but there is one property on the touch that I don't recognise from my PC and that is someting that translated could be named "Search Domains". It's the last property under the static wireless config tab.

    I have no idea what I am doing... but once i changed the proxy (HTTP) my life is just miserable, no sites open, like its really annoying. Do you know how to fix it.

Maybe you are looking for

  • How to send a mail that appears as meeting dialog in MS outlook?

    Hi: Is it possible for the mail adapter to send a mail that appears as a meeting dialog in Ms outlook? If yes, could you please tell how to do it? Actually I'm developing my own module. Thanks a lot.

  • Runtime ik springs: child nodes break when a parent node is moved

    There is something wrong with IK armature springs when used in runtime mode. Child nodes become disjointed with user interaction of parent nodes. Drag spring on right from different points to see bug here: http://gardenofpossibilities.org/flash/ik_sp

  • Profiles in settings

    While I was looking in my settings, I came across the profiles tab in the general section. In there I had two profiles; mflhomedis and MBShelloapp-provision. I am little paranoid about privacy so can anyone tell me what this is?

  • Sys Prefs/Network asking to authenticate a PCI FW card?

    Hello again folks, Another odd anomaly - when I open system preferences and hit the Network tab, an alert screen pops up asking me to "Authenticate" a PCI FireWire Slot 4... Yup, I recently installed a FW800 card - and it appears to be working (drive

  • Genre - HOW to edit or delete?

    Greetings, I'm wondering if there's a way to edit or delete the genre list of iTunes? Could anyone kindly answer? Your expertise is very much appreciated.