Elements 9 Cloning and Healing problems

My Cloning and Healing Tool doesn't work correctly. Both very often puts what I am cloning or healing (with content aware) somewhere else on the photo other than where I want it. Sometimes it put a large streak accross the photo as I make a small correction somewhere else. It use to work fine. System: Win 7, 64bit, large memory, large Hard Drive, new computer, no other software has been installed... Thanks so much

Thanks Barbara. This did make my problem a lot better, but it still misses up from time to time as discribed, so I just hit rest tool in top left corner and then I'm good to go for awhile. I can live with that, unless you have another idea that can help. Thanks so much.

Similar Messages

Why is the cloning and healing tool in lightroom 5 no longer showing the stamp where it is replacing from?

When I use the cloning and healing tool it used to show a stamp indicating where it was replacing from. It suddenly stopped working. I can still remove spots but cannot move it around to see where I could use alternate space to clone or heal.

The source should show on both Heal and Clone. Hit the H key to turn them off and on or pick one of the options in the Toolbar.

Photoshop cc 2014 suddenly trouble with cloning and healing tool

I just updated photoshop cc 2014. I use a wacom tablet. Suddenly, when I use the healing brush or cloning brush. The brush control panel pops up and the tool simply doesn't work. After repeated attempts, I do succeed in getting this to work. Sure slows me down though.

Sorry for the lack of the report it was my first time reporting an error for software... Never had an issue before.
I haven't experienced the crash via text tool since I posted the question, but the Photoshop is still constantly crashing at startup, but every time I try to enter the report I get the error: Please try again later.m5

Adobe premiere Elements 12 video and audio problems

When ever I import a video that was recorded with bandicam both the audio and video are terrible, the video is 360 p and the audio is static. I just bought Adobe premiere yesterday and already having issues. If anyone can help it is greatly appreciated.
The format for the video is: MPEG-1
The audio is: MPEG-1 L2

Bandicam read #10 http://forums.adobe.com/thread/954394

Adobe Premiere Elements 9 has encountered a problem and needs to close.

Adobe Premiere Elements 9 has encountered a problem and needs to close. Asked to be debugged no response an then the program don not respond.
If i Run an old project direct from the file PE 9 it works and then go to a new project it works but from the start up it just closes down.
Bridge is also starting to do it

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

When trying to write a text on a photo I get this as soon as I draw the textbox"Could not complete your request because of an problem error" then "An unexpected and unrecoverable problem has occurred. Photoshop Elements will now exit."

After updating my macbook to Maverick, PS 7 I had for years stop working. I then download the Elements 12. It has been a few weeks and I can't do anything on it. I quit every time but tI had to come forward because a friend asked to do her wedding invitation. I downloading an image and background, put everything together, and when saving it... BAM! I've that first message "could not complete your request..." I tried several solutions i found on forums, somehow the image is saved as I wanted, it took all day long working on it, i don't even know what got it right. Now I am working on the writing and every time I draw the text box, i get the "could not complete your request..." then I hot "OK" and I get the "an unexpected and unrecoverable problem occurred..." photoshop quits!
About my mac OSX 10.9.4
2 GHZ Intel Core 2 Duo
4 GB 1067 MHz DDR3
72.62 GB free out of 159.18
Please Help!!!
Error Code:      0x02000148
Trap Number:     133

After updating my macbook to Maverick, PS 7 I had for years stop working. I then download the Elements 12. It has been a few weeks and I can't do anything on it. I quit every time but tI had to come forward because a friend asked to do her wedding invitation. I downloading an image and background, put everything together, and when saving it... BAM! I've that first message "could not complete your request..." I tried several solutions i found on forums, somehow the image is saved as I wanted, it took all day long working on it, i don't even know what got it right. Now I am working on the writing and every time I draw the text box, i get the "could not complete your request..." then I hot "OK" and I get the "an unexpected and unrecoverable problem occurred..." photoshop quits!
About my mac OSX 10.9.4
2 GHZ Intel Core 2 Duo
4 GB 1067 MHz DDR3
72.62 GB free out of 159.18
Please Help!!!
Error Code:      0x02000148
Trap Number:     133

I am having problems install Photoshop elements 8.0 and premiere elements 8.0

I have recently received both photoshop elements 8.0 and premiere elements 8.0 and neither will install.
I have gone through (at length!) all the support suggestions e.g. adusting accelaration etc. Absolutley nothing works! I have spent over 4 hours trying to sort this problem which as it is a new product is extemely disappointing. I look for any helpful advice or should I just claim my money back?

I tried downloading the trial version which seems to have gone through. However although i can see lots of new files in a "Premier elements" folder in programs, I cannot see any way to open it. It has not appeared on the programs list and there is no shortcut on the desktop. How am I supposed to access this software?
If this is a trial, you really should make it more user friendly as I am not impressed at all so far.
I have spent over 6 housr now trying to get this sofware to work. If you cannot nwo get this to work, i will return to store and get refund (and use a version of Pinnacle recommended by a friend who has had no problems!
I look forward to an easy and quick resolution.
P.S I note your on line chat is useless as it is only available to USA residents.

Printing Problems with Elements 8.0 and EXIF time data

I've been using Premiere Elements 8.0 in Windows XP Professional for a couple of years with no problems. I shoot mostly in JPEG. I've always imported my images using a card reader (the same one). About a year ago suddenly I ran into printing issues. When I imported my images and tried to print them Elements crashed just at the point where it should begin the actual printing. By chance I discovered that if I adjusted the time EXIF on the images in Elements by either hours or days, back or forward and adjusted them back to the original time/date the problem disappeared. If I had shot in RAW and edited these images there were no problems with the resultant JPEG.
I noted the discussions about Elements changing the time in the EXIF and checked for this but this hadn't happened. The EXIF in camera and in Elements were the same. I also checked this against the time settigs of the camera and they were the same. I shoot with a Nikon D300.
I backed up my images and did a complete re-format of my computer so that it was back to its ex-factory settings, re-installed Elements, restored my catalog from the backup and the problem still arose. I'm reluctant to upgrade to Elements 10 until I (hopefully) I find out if (a) anyone else has the same problem; and (b) if anyone who had it has fixed it.
Any ideas would be very welcome.

Miceal,
I am confused. Do you mean Photoshop Elements? Premiere Elements does not have a Print function. On can Export/Share, but not Print. For Photoshop Elements, you will want the PSE Forum.
Good luck,
Hunt

Any problems using different versions of photoshop elements (7.0) and premiere elements (8.0)?

I already own Photoshop Elements 7.0 and am now considering buying Premiere Elements 8.0. Does anyone know if I will have any version problems with this, especially with the Organizer? Do I need to upgrade PSE to 8.0 as well?

1- A forum participant tested that slideshow workflow from Photoshop Elements 7 to Premiere Elements 8 and verified that it worked for him.
2 - General Organizer use is probably an entirely different question. I have not attempted that myself and don't know anyone who has. It seems doubtful that a specific catalog file could be shared between Premiere Elements 8 and Photoshop Elements 7.
3 - Since you mention that you are interested in upgrading to Premiere Elements 8, I recommend that you read relevant FAQs from the FAQ forum here, starting with
http://forums.adobe.com/thread/533334?tstart=0
http://forums.adobe.com/thread/503270?tstart=0

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

Clone Stamp and Healing brush problem, please help!

Hi there, I'm new to the forum but I have been using Adobe creative suite for quite some time now. As the thread title describes, I'm having an issue with my photoshop clone stamp and healing brush tool that I can't seem to fix on my own. I searched the internet all day, scrolling over many other posts but I can't seem to find anyone else who is having similar issues like I am having here.
This is kinda hard to explain but the issue I am having, is that when I go to use either my clone stamp or healing brush tool, the layer I am working on whether it is a flattened background or normal editable layer, get shifted as soon as I press the option key to make a selection and then when I go to move to the area to use these tools it acts like I've duplicated the entire layer and drags it around the screen, even though no such copy and paste has been made. All of my other tools are working normally and I wasn't having this issue last time I worked on anything in photoshop.
I am running:
a Mac OSX 10.5.8
CS4 extended version 11.0.2
Any and all help is greatly appreciated.

Your probably seeing the clone source overlay.
Go to Window>Clone Source and either uncheck:
Show Overlay for no overlay or check clipped to show the overlay
clipped to the size of the brush.
There is also a photoshop macintosh forum for future reference
(you posted in the photoshop elements forum)
http://forums.adobe.com/community/photoshop/photoshop_macintosh
MTSTUNER

I changed my HD "C". After reinstalling P Element 2 I got a problem. I can't open Photoshop Element. Error message is "Your working disc is full" But I have 61Go free on "C" HD and more than 1To free on "D" disc.

I changed my HD "C". After reinstalling P Element 2 I got a problem. I can't open Photoshop Element. Error message is "Your working disc is full" But I have 61Go free on "C" HD and more than 1To free on "D" disc.

Try resetting the pse 2 preferences and see if that clears things up.
reset preferences
Press and hold down the Shift+Ctrl+Alt keys just after starting the launch of pse 2
Keep holding the keys down until you get a dialog asking if you want to Delete the Adobe Photoshop Elements Settings File
Press Yes

I am having problems with clone and heal. No matter what I do nothing changes in the image. Has anyone had this problem?

I am having problems with clone and heal. No matter what I do nothing changes in the image. Has anyone had this problem?

Do you have your Opacity Control set to a very low value?

Why does Elements 12 crash as soon as I open Type tool? Get message "An unexpected and unrecoverable problem has occurred. Photoshop Elements will now exit. Using Mac

Why does Elements 12 crash as soon as I open Type tool? Get message "An unexpected and unrecoverable problem has occurred. Photoshop Elements will now exit." Using Mac. No imported fonts

Thank you, Barbara. All fonts seemed fine, no empty or duplicates. When I went back to Elements and tried again, it did not crash! After months of not being able to use type tool,,, not sure why it worked, but it did. Thanks again! I appreciate the time you took to answer my question.

Elements 9 Cloning and Healing problems

Similar Messages

Maybe you are looking for