Elements 9 distorts .gifs where Elements 2 does not

Yesterday I posted my experience of Elements 9 distorting .gif files on opening. Today I discovered that Elements 2 does not do this. In this respect Elements 2 is in line with Windows Explorer, Mozilla, MS Paint etc. etc. What is going on please?

Here's something that should work in pse9.
1. In the pse9 editor, go to File>Import>Frame From Video
2. Click the Browse button and then in the file dialog, choose All Files
   and select the gif file and click open.
3. In the Frame From Video dialog, click Grab Frame and then click done.
It would probably be a good idea to file a bug report so adobe knows
of the problem. You can use this page:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=72
MTSTUNER

Similar Messages

  • When I click on a picture, Photoshop Elements 12 does not automatically open.

    When I click on a picture, Photoshop Elements 12 does not automatically open (as it did when I used previous versions Photoshop Elements 4 and 9).  I can't even right-click (Windows) on the picture and choose Open With and specifiy Photoshop Elements 12.  I have called Adobe several times (Case No. 185140584) and they keep saying it has been sent up to senior management and they will call me back with a solution - but to no avail!  No return calls and I still can't really use the Product I paid for and downloaded.  The only way I can open up a picture to edit it is to open Photoshop Elements 12 and then then click "Open" and then search for the picture on my hard drive (which takes a lot more time!  I did not experience this difficulty at all with versions 4 or 9!

    Hi,
    You failed to say which Windows system you have - I can get the "Open With" to work on my Windows 7 64bit system.
    When you try to set up the "Open With", are you setting the correct target program?
    It's the green one (not the red one) in the above image.
    Once you have selected that program, make sure you set it as default so that a double click will open the photo in the editor.
    Good luck
    Brian

  • My serial number for adobe photoshop elements 12 and premiere elements 12 does not work

    My serial number for adobe photoshop elements 12 and premiere elements 12 does not work.  On adobe.com it shows that the serial number I received is associated with adobe photoshop elements 9 and premiere elements 9.  I have purchased those products in the past, but just recently upgraded to elements 12.  I can use the the photoshop organizer, but can't open the photoshop editor.

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • Adobe Photoshop Elements 12 does not work with Yosemite 10.10

    My Adobe Photoshop Elements 12 does not work with Yosemite 10.10 nor does my Premier Elements 12. When I try to start them up I get the error message. After uninstalling and reinstalling a few times its still the same. Strangely enough PSE 11 seem to work with Yosemite.  I uninstalled my Premier Elements as well and it behave the same way. How do I get a new copy of Premier Elements 12 to reinstall?

    Just to further test what is happening to my iMac on Yosemite is I downloaded the trial version of Photoshop CC and when I go to launch it it gives mr the same error message as when I try to launch PES 12 or Premier Elements 12. So whatever the problem is it involves all three and so upgrading to Photoshop CC doesn't even help.  Could there be an Adobe file damaged or missing somewhere that is common to these and yet does not effect Revel and Lightroom?

  • Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in

    Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • OTL Error - Hrs - Element link does not exist for the duration of the entry

    Hi,
    We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
    Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
    However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
    Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
    I have re-run the security list generation (we are using static list).
    The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
    The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
    We are using 11.5.10.2
    Thankss

    Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
    If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

  • Container element 'ADDRESSSTRINGS' does not exists

    Dear all,
    I am trying to define expression for recipient type
    it gives me error
    container element 'ADDRESSSTRINGS' does not exists
    container element 'EXPRESS' does not exists
    container element 'TYPEID' does not exists
    Can you please share the technical detail of these parameters
    or is there some other problem
    Best of regards,
    Gaurav

    Hi Gaurav,
    These are the standard task container's for the send mail step type.
    No need create these container's and already they are available in the Task container.
    Have you used the standard task to send the mail? If so just double click the Task ID and you can find these container's under the Container Tab.
    Just delete the send mail step and create a new one. It will solve the issue.
    Thanks,
    Viji.

  • Container element 'NODEOBJECT' does not exist

    Dear Gurrus,
    While creating clarification case category i am having  this error "Container element 'NODEOBJECT' does not exist" .
    kindly help me out in resolving these issue.
    Regards,

    Hi,
    I think you need to check  Note 1082707 - Error message 'Container element ... does not exist'
    Symptom
    You have created a container element manually in a case category and you are trying to define the dataflow but in the binding editor you are receiving error message SWF_EXP_001 035 'Container element ... does not exist'.
    Other terms
    FP-EMMA, BPEM, EMMACCAT2
    Reason and Prerequisites
    The problem only occurs if you create an invalid container element that contains one or more spaces in the element name.
    Solution
    Choose a valid element name that starts with a letter and contains only characters, numbers, or underscores. The following correction does insure this.
    See the full note if it can be of help.
    regards,
    David

  • ALV Filter Selection w/ error "WBS element 0000000000000000 does not exist"

    Hello,
    In a few ALV reports, we have WBS Element column showed in ALV list and WBS Element defined as type BSEG-PROJK, which has conversion routine ABPSP.
    When WBS Element is used for ALV list Filter, in Selection screen, error message "WBS element 0000000000000000 does not exist" is pop up as we hit Enter key or click on u201CSelection optionsu201D button with no value entered in Input fields.
    We get same error even after we enter an existing WBS Element in Low selection input field and hit Enter key.
    Itu2019s ok if we enter existing WBS Element value in both Low and High selection input fields.
    We know we have workaround by entering both Low and High input field, and we can fix ALV reports by using character based WBS Element, such as PRPS-POSKI.
    BUT, as users told me, they donu2019t have this problem before and it just happened. We checked the recent Transports and couldnu2019t see anything relevant.
    Could any of you let me know if you have any clue or if thereu2019s any other way to fix it besides changing report by report.
    Thank you.
    SL

    Hello,
    In a few ALV reports, we have WBS Element column showed in ALV list and WBS Element defined as type BSEG-PROJK, which has conversion routine ABPSP.
    When WBS Element is used for ALV list Filter, in Selection screen, error message "WBS element 0000000000000000 does not exist" is pop up as we hit Enter key or click on u201CSelection optionsu201D button with no value entered in Input fields.
    We get same error even after we enter an existing WBS Element in Low selection input field and hit Enter key.
    Itu2019s ok if we enter existing WBS Element value in both Low and High selection input fields.
    We know we have workaround by entering both Low and High input field, and we can fix ALV reports by using character based WBS Element, such as PRPS-POSKI.
    BUT, as users told me, they donu2019t have this problem before and it just happened. We checked the recent Transports and couldnu2019t see anything relevant.
    Could any of you let me know if you have any clue or if thereu2019s any other way to fix it besides changing report by report.
    Thank you.
    SL

  • Photoshop Elements 13 does not respond to editing tools

    Photoshop Elements 13 does not respond to editing tools.  I have a MAC.  Any suggestions?

    Reset the tools or reset preferences.
    What version of operating system?

  • Flash element panel does not appear when Flash is selected in DW3

    In DW3 (Win7) After creating several slide shows using image viewer and months later when I want to edit the image viewer.. When I click on the flash slideshow that I created in image viewer in order to edit it and the Flash Elements panel does not appear on the right as it did before. I have the Tags panel open and it has changed to Flash elements in the past but it is no longer appearing. This happened with a friends DW3 also.

    DW3 or DW CS3?

  • My elements 11 does not seem to recognise Nikon raw NEF files. Is there A  fix available for this.

    My Photoshop elements 11 does not appear to recognise Nikon NEF raw files. Is there a fix for this?

    Other than upgrading to pse 13, you can use the 8.7.1 dng converter to convert the nikon D750 camera raw files to dng copies, which then pse 11 should be able to open.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
    how to use the dng converter:
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Premiere Elements V4 does Not Support Matrox Parhelia 128mb Vid Crd - What video card should I get?

    Premiere Elements V4 does not support Matrox Parhelia 128bm Video Card.  Is there a recommended card that will work?
    I have an Asus P2B Mother Board.  Many thanks for any feedback.

    Welcome to the forum.
    About any current card, with good driver support, should work fine. The amount of VRAM is not that important, but I would go with ~ 1GB. The driver support is the main factor.
    I am running PrE 4.0 and PrPro CS 2 Production Studio on my laptop w/ an nVidia GeForce 8800M GTX - 512GB VRAM, with no issues. That card/chip is a bit old now, and obviously the VRAM is less, than I mentioned, but to "future-proof" the computer a bit, the ~ 1GB VRAM would possibly help.
    Good luck,
    Hunt

  • Does elements 13 accept canon 70d raw file,as elements 11 does not

    does elements 13 accept canon 70d raw file,as elements 11 does not,

    Hi,
    Yes, Photoshop Elements 13 should read raw files from the EOS 70D. You can always download the trial version and test it for yourself.
    Download Photoshop Elements products | 13, 12, 11, 10
    Brian

  • Redemption code for Adobe photoshop/premiere elements 11 does not work

    redemption code for Adobe photoshop/premiere elements 11 does not work

    I am having the same issue except that my premiere elements code worked great, but the photoshop elements key failed. Ugh.

Maybe you are looking for