Elements 9 does not read Lumix LX7 RAW

Photoshop Elements 9 can not open RAW-files from Panasonic Lumix LX7. Any updates? Any suggestions? use win 7/64

The release canidate of the 7.2 dng converter, since pse 9 won't support the 7.2 camera raw plugin release canidate.
I don't believe pse 9 will support the final released version of the camera raw 7.2 plugin either, will it?

Similar Messages

Aperture not reading lumix lx7 raw files

I have installed updated Aperture from App store and it and IPhotos in my GMac5 arent recognising the RAW Panasonic Lumix LX-7 files: it keeps on importing them and then stating that this is an unsupported file type but on the Mac site it is stated that it supports this file and this camera.
What might be going wrong?
This is a new camera and I cannot load any files on to my computer.
cheers
Mark

GMac5
What is your MacOS X version, Mark? And what Aperture version have you upgraded to?
The raw support for LUMIX DMC-LX7*** hast the following footnote:
*** Requires Aperture 3.4 or later.
Aperture 3.4 requires:
OS X Lion 10.7.5
OS X 10.8.2 or later
And to install 10.7.5 you will need:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
Regards
Léonie

Elements 12 not reading files as raw on MAC

Today is day one of my use with a new Macbook Pro! I am having a hard time with Elements 12. So far it is not reading my Nikon's raw image files as raw but just calling them jpeg. So when I open in camera raw it won't allow me to change all the settings like it does on raw files, but treats them like jpeg and has limited editing options. How can I get it to read them as raw? My macbook pro is showing them as raw files. I have a converter for NEF to DNG but that won't read them as NEF (raw) files either so therefore won't convert to DNG which I know on my Windows would then read them as raw. I hope this makes sense and someone can help!!
Thank you so much.

What is your screen resolution, in pixels? Have you changed it from the default?

Elements 9 does not accept or process RAW photo images taken with a Nikon D7000.

Adobe elements 9 does not accept or process RAW photo images taken with a Nikon D7000. I called support for a download patch and they said I had to purchase a support package or essentially purchase Elements 10. I can't believe that Adobe would not have a download patch for this problem as my elements 9 is not very old. When I try to do the updates Adobe says the serial number of the elements 9 is not accepted for download or support even though I purchased it and registered it with Adobe.
Is there any solution to this?
Thanks.

Thank you but still having a problem. I go to the edit menu>>help>>update>>check for updates and an update to 9.03 comes up as the only update, no camera raw update. It starts to download and then stops and says to close organizer and/or editor then starts back up and stops again saying "error installing this update. Close and contact customer support". When I called customer support earlier that's when they said they don't support 9 only v. 10 and did I want to buy support or a new program v10 to get camera raw processing for the Nikon D7000 RAW. Apparently I'm doing something wrong in the update procedure but don't know what. The camera raw version is 6.5 in my elements and understand that camera raw v. 6.7 is the update to process the images. Any ideas? If I uninstall and reinstall does the serial number still work on the reinstall?
Thanks for help.

I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5

I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3. I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have. I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version. What should I do

I have 6.0. Tried to download newest verion and it will not download. Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
Thanks, John
m: gener7
Sent: Thursday, December 11, 2014 6:01 PM
To: JOHN STAHLY
Subject: I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

My program does not read raw files from mark III

My program does not read raw files from mark III

emac77,
Support for Canon 5D MIII RAW files was announced in ACR 7.1 (Adobe Camera Raw 7.1).
The current stable release is ACR 7.2 while ACR 7.3 is still a Release Candidate (Beta).
Starting ACR 7.2, Adobe stopped supplying a manual download link which was available till 7.1. Adobe Application Manager (AAM) is the only way for you to update to ACR 7.2.
However, here is a direct download link that AAM connects to for the download that you can use to grab the .zip or .dmg (Mac) file. Download and install. See if you're able to open your files then.
ACR 7.2 for Windows: http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/7.2.82/Setup.zip
ACR 7.2 for Mac: http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.2.82/Setup.dmg
-ST

Camera raw does not read D7100 nef files [was:Ernied]

Camera raw does not read d7100 nef files. did update...still no success.

I suspect that the DNG converter will work for you if you use it properly. It isn't your fault, but Adobe has created a kind of a silly interface in the DNG converter. Notice that it is asking you for the folder. When you are browsing for a location within the DNG converter, choose the folder, but don't open the folder. If you do then the DNG converter will tell you there are no images to convert. If you choose the folder then the DNG converter will convert all the files within that folder.

Elements 11 states that it does not support the camera raw from my new Nikon D600 and that I should

Elements 11 states that it does not support the camera raw from my new Nikon D600 and that I should go to "the Camera Raw help documentation." When I click on the help menu I get a message from my browser stating that it is a dangerous website. Now what

Unfortunately it was clicking on Updates that brought the “dangerous website” pop-up, but several hours later I tried again for the umpteenth time, and it worked! I am so glad because I am working on a project with a deadline.
Thanks for replying. Maybe if someone else has this problem they could be told to wait a few hours and try again.
The main option on the ‘dangerous’ pop-up is a “Get me out of here!” button, which I always clicked. There are options to go to the website anyway, but I am too leery of the web to do that. Now that I know it’s possible to reach the update center without risk I will never consider it.
Thanks again,
Lynn

PSE 9 does not come with Camera Raw 6.2?

Photosho Elements 9 does not come with camera raw 6.2
, I downloaded the trial version which came with an outdated 6.1... the only version of 6.2 is for PSE8 and does not work with PSE9 how is this possible? How can they release a product with an outdated ACR????Now we have to wait for an update to a new product???Come on people!!!

Cheap shot, Phil. Up to now, Mac users got no Organizer but a special bonus: full Bridge, full access to full featured ACR. With this version, both platforms get the same stuff -- it's less than full Photoshop/Bridge CS5, at a small fraction of the price.
I admit, as a Mac user who shoots RAW, I liked the old trade-off...but I can understand the desire to make the two products consistent. If that makes PSE "inferior" for you than you should stick with Bridge CS4/Raw 5.7, or move up to the full-featured siblings, or switch to Lightroom.

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
https://forums.adobe.com/community/premiere_elements
When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one. Then save the file. If you move the files again, you will have to relink them again.

WBS element does not belong to business area(Message No: CJ067)

Hi All,
While doing Billing through DP91 by giving the Sales Order No.,
it is giving the error "WBS element *****does not belong to business area** ".
The configuration between Business Area and Plant in Enterprise Structure level is fine.
Do let us know anything else need to be done to resolve the same.
Needless to say that helpful replies will be awarded points.
Best Wishes & Regards,
Raj Kumar Reddy.

Hi Chandra,
Business Area was given both in CJ20N and Sales Order level.
Also both these business areas are same.
To be more clear:
Say in the error it has mentioned the business area as 'X'.
But in Sales Order and Project level, 'Y' has been maintained.
System is throwing 'X' error, because the same is maintained under Cost Center level.
I cannot change the business area in Cost Center to 'Y' because of my business restrictions.
Regards.,

PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?

PS Elements 10 preinstalled on my new computer with Windows 8. It worked fine for a week, now opens once, then won't open again, or doesn't open at all. Adobe gives no support to fix this (they told me to research the answer on their site), yet their info says PS 10 and Windows 8 are compatible. Automatic troubleshooter gives non-compatibility message. Can this be fixed? Have spent many hours trying to figure this out. Uninstalled and reinstalled. Nothing works so far.

Thank you for your help. I tried ctrl-alt-shift, and it worked a few times, but not every time. After trying your suggested fix, here's what I've since found that works - so far - today.Open Task ManagerClose PS Elements 10Close Task ManagerLaunch PS Elements 10 Please keep in mind that I was closing the program the usual way (from the program) all along. I used an older version of PS Elements for years on my old computer (Windows XP), and never had a problem launching or closing the software. This problem came about on a new computer with PS Elements 10 and Windows 8. No other versions of PS Elements were installed on the new computer, nor were any settings brought over from the old computer. Again, thanks for your input. Will keep your suggestion in mind for any future troubles with Adobe products.
A Digiovanni
Date: Fri, 11 Jan 2013 00:51:43 -0700
From: [email protected]
To: [email protected]
Subject: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
    Re: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
    created by c.pfaffenbichler in Photoshop for Beginners - View the full discussion
Good day! You may want to post on the Photoshop Elements Forum. http://forums.adobe.com/community/photoshop_elements In general trashing the Preferences (by keeping command-alt-shift/ctrl-alt-shift pressed while starting the application) can be helpful with malfunctions in many Adobe applications. Regards, Pfaffenbichler
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4985553#4985553
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4985553#4985553
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4985553#4985553. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop for Beginners by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

Hi Jim,
yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
Many thanks for your help.
Andrej.

Hierarchy could not be included; root element does not exist ?

hi,
I try to change hierachie for the released WBS with function CN2W_WBS_HIERARCHI_CHANGE_STRU, but I got an error like : "Hierarchy could not be included; root element does not exist" But this does not happen when we change the WBS hierachie in CJ20N, Could you please help me how to change hierachie for the released WBS using the function ? And Which function I can use ?
Thanks in advance

you are using correct function module. Just check the values in Up and down columns .

XPATH Condition to check if an element does not exists

Hi Experts,
I want to know the XPATH condtion to check if an element does not exist.
I have searched the forum but could not find a relevant discussion.
Please help.
Regards,
Ravi kanth Talagana

Left Operand should be your element on which you need to implement the condition
Middle Operand (Condition column) should be Not Equal
Right Operand should be constant EX
I used this condition in RD to route a file from source to target if some element is not present in the file....not present means not even a blank entry for the element....
Check it and let me know the result.
Regards,
Abhishek.

Elements 9 does not read Lumix LX7 RAW

Similar Messages

Maybe you are looking for