Elements 9: Failure to load on IMac

Can somebody help me, I have had Elements 9 for a number of years but never tried to load it until today, disc 1 loaded ok om my mac but disc 2 would not load, it started to load but stopped and it was ejected with the following message: warning: payload cannot be installed due to dependant operation failure.  Can somebody help me?

Here's an interesting take on the "dependent operation failure" error message
Adobe CS5: Payload cannot be installed due to dependent operation failure

Similar Messages

  • How do I move Elements 11 photos and catalogue from iMac to new iMac both running Yosemite?

    I've been researching best way to move my photos and catalogue from my current iMac to my new iMac.  I'm using Elements 11.  Both iMacs running Yosemite.  I know I need to deactivate the current computer's version of Elements if putting it on the new one runs me over the license limit - I don't think it will.  I have read enough to be pretty sure I have to NOT migrate the Elements 11 program to the new iMac because it won't work properly - I'll have to reinstall it from my installation disc on the new iMac.  So far, so good. 
    Now, I want the easiest way to get the photos on the new iMac, in the same folders, and preserve the catalogue and my current ratings on the photos.  I am unclear on how the catalogue works with its backup and restore function.  Should I move all my photos in their folders in exactly the same locations on my new iMac before installing Elements and trying to restore the catalogue?  I read about the ways to restore the catalogue and I am unsure about whether it just looks for the pictures in the places it expects to find them (which will be the same if I copy everything on to the new iMac first), or whether it restores the pictures where it thinks they should be (in which case I should NOT put the pictures on the new iMac before restoring the catalogue or I'll end up duplicating everything).   Also I have read - and been confused by - the options about restoring catalogue in new location, old location, etc.  I don't want my folders changed.  I have my pictures stored where I want them and I want to keep them there - and I'd prefer not to add some extra layer under the basic My Pictures on my iMac.
    I have stored the most recent version of the catalogue, with all photos reconnected, on an external drive.  All the pictures in the catalogue have their meta-data associated with them.  I hope that this will allow me to preserve ratings.  Going through thousands of pictures to find the really good ones again is a time-consuming mess.  When I went from Windows to Mac 3 years ago - I lost the catalogue and all ratings.  When I upgraded from Elements 9 to Elements 11, I lost the catalogue and all ratings.  I do NOT want to ever go through that again.

    I appreciate your answer and agree that it is correct, but you told me nothing I did not know.  There is an Elements technical paper which says this in much greater detail, but still does not answer the questions I was trying to ask.
    The catalogue file seems much too small to include my thousands of photos.  Are you telling me that it has magically reduced the size of all those photos - from 64 GB to 33 GB, and added the catalogue information - so that the photos will just appear out of nothing but that smaller catalogue file when I restore catalogue?  If so, will you explain the options of same location, new location, new location with existing file structure, etc? 
    I understand installing the program.  I understand that I should backup the catalogue (I've done it).  I understand I will use restore to restore the catalogue.  I found all this on other sites.  I need someone, somewhere, to explain to me if I need to copy the photos themselves to their new location before I restore catalogue - or not.  And which option in restore to use.  I thought I explained this in my original question.  Any help on these questions about matters I do not understand will be appreciated.

  • My iBooks were fine yesterday,today unable to read, message comes up; failure to load book because requested resource is missing".  What do they want?

    My iBooks were fine yesterday, today unable to get into book, message comes up, "failure to load book because requested resource missing"  
    It doesn't tell me what resource is missing, & why could I read this 12 hours ago fine.

    I've got a solution, it's not so perfect, but i bet someone would come out with a better one based on mine.
    Solution:
    Step 1: close iBooks app and delete all existing book data
    Since I have recently lost all files in my ibooks library due to something wrong with Time Machine backup, I could delete all my book data without anything to worry about.
    I deleted all files in:
    /Users/[usename]/Library/Containers/com.apple.BKAgentService/Data/Documents/iBoo ks
    and the iBook configuration files (well, the whole folder):
    /Users/zlw/Library/Containers/com.apple.iBooksX
    It doesn't matter if you have deleted the whole iBooksX folder, what you would lose at most is the bookmark data, etc.
    deleting all the files inside the iBooks folder of BKAgentService will enable you to redownload the file that you want correctly.
    Step 2:
    reopen iBooks and you will be able to download the book that you want.
    Possible improvement:
    there is a Books.plist file in the iBooks folder of BKAgentService, it might be possible to modify the plist and and the folders so that it's not necessary to delete them all.

  • Error while loading services: Failure in Loader: VerifyError: Error #1014

    I have a library that, after it loads, I see this error in the console:
    Failure in Loader: VerifyError: Error #1014: Class mx.collections::ArrayCollection could not be found.
    I had the same problem with another library, except it had a problem with IToken. I got around this problem by changing the default linkage of libraries in build path from external to merge into code. That did not work this time.
    Merging Flex libraries into service libraries does not seem to be anything close to the correct way to deal with this. Besides, it didn't some the problem every time.
    What is the best way to keep these sorts of dependency errors from arising? The RSLs are included with Web apps, but not with libraries.

    I have found what happened.
    I created a library and created a data model within it. I created some entities within the data model. Some of those entities had collections as properties. I created the ActionScript code for the model and the collections were ArrayCollections. I moved the interfaces of the created code to a separate library.
    The interfaces need to be changed from using ArrayCollection to IList. I knew enough about that to change it for the service I was trying to bring into my application. I missed another interface that had ArrayCollections as properties and that caused the error.
    After cleaning up all of the ArrayCollection references from the interface library my service loaded.
    The Hello Gravity video tutorial has a very good explanation on why specific implementations of Flex classes are not used in service interfaces: http://blogs.adobe.com/gravity/2011/09/09/hellogravity-sample-application/

  • I ma trying to install A Photoshop Elements 10 and A Premiere Elements 10 on to my repaired iMac (ne

    I am trying to install A Photoshop Elements 10 and A Premiere Elements 10 on to my repaired iMac (new Hard drive). I am using disc 3 but get Exit code 7 Warning DW031 Payload and Camera Profiles update. i have tried restarting but the same happened.

    Hi Jrwrennie
    Please refer the below KB Doc for Exit Code 7 : http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • Solution (sort of) for Safari hangs/failure to load

    I and several others have been experiencing frequent hangs (or failure to load) with Safari 5.0.2 and 5.0.3 under OS X 10.6.5 and 10.6.6. Out of about 100 page loads, these hangs occur about twice. All pages stop loading and the progress bar stops at "http://www." It's not a full crash -- you can still switch between tabs and use the menu -- but no pages or page items will load.
    After much helpful back and forth with Apple tech support and other affected individuals, we seem no closer to finding the cause of these hangs, but I have discovered a "sort of solution". When the hang occurs, if you have another tab that has already fully loaded, go to that tab and choose Save as... from Safari's File menu, then Cancel. That will free Safari which will resume normal operations. (If you don't have another tab already loaded, you can usually switch to any other app and choose Save or Save as..., then Cancel.)
    No idea why this works, but it does and very consistently.

    If anyone knows any better about what I wrote, please let me and everyone else in this forum know.
    I will be adding this to my Linux 8i Installation Page:
    http://homepages.tig.com.au/~jmsalvo/linux/oracle8i.html
    John Salvo
    null

  • I have Photoshop Elements 12 and just loaded on a Yoga 2 with Windows8. When I open Photoshop the tab wording in really small. Is there any thing I can do to increase the size to make it easily readable?

    I have Photoshop Elements 12 and just loaded on a Yoga 2 with Windows8. When I open Photoshop the tab wording in really small. Is there any thing I can do to increase the size to make it easily readable?

    I have Photoshop Elements 12 and just loaded on a Yoga 2 with Windows8. When I open Photoshop the tab wording in really small. Is there any thing I can do to increase the size to make it easily readable?

  • Premiere Elements 8 won't load recently saved project

    I'm using Adobe Premiere Elements 8 to create a highlight video.  I made two videos last year and didn't have this problem but this video is slightly longer.  About twenty minutes total consisting of approximately 100 video clips.  I've added one more group of clips and not when I try to load the saved project I just get a gray blank screen.  The load message finishes but nothing appears.  The drop down menus are mostly still grayed out.  No good selections except to press load project again.  This causes a system error that shuts down the application.  Any tips or tricks are appreciated.
    Thanks,
    Dave Flick

    Bill, here is the good news.
    I updated the Quick Time like you suggested but no help.  I updated the video driver but no help.  I disabled the hardware acceleration but no help.  During this time I realized the problem started after I upgraded McAfee.  I remembered the new McAfee Real Time scanning effected my Outlook software.  So I disabled the McAfee Real Time scanning and then Premiere Elements 8 would successfully load my saved project.  What a relief.  I went back and Turned On the McAfee Real Time scanning but changed the setting to only scan programs and documents, not all files as previously set.  I'm back in business and really appreciate your help.  Thanks a million.
    Dave Flick

  • Can I move the Photoshop Elements 6.0 from an older iMac to a new one?  The new iMac has no drive?

    Can I move the Photoshop Elements 6.0 from an older iMac to a new one?  The new iMac has no drive?
    Jerryt

    I share this person's pain.  And was just now about to ask the same question.  So, in effect we're screwed.  I have the disc but without a drive I think E12 and this computer is going to have a very short life in my life.  And for the life of me, why is so darn hard to get questions answered by Adobe?  Good grief...I have 2 books and have saty through enough video "tutorials" to last me for some time!
    1deu

  • Photoshop elements 12 won't load up on my PC. The first time I try to load it up I get a large egg timer, which lasts about 3 seconds. The programme then closes and if I try to load it again I get the circular icon which spins for 1 second and disappears.

    Photoshop elements 12 won't load up on my PC. The first time I try to load it up I get a large egg timer, which lasts about 3 seconds. The programme then closes and if I try to load it again I get the circular icon which spins for 1 second and disappears. I've tried rebooting several times but nothing happens. Please help!

    Hi,
    Please try resetting preferences?
    On Windows: Goto %appdata%\Adobe\Elements Organizer\12.0\Organizer folder and rename the files “psa.prf” (to say psa_old.prf) and “status.dat” (to say status_old.dat).
    Try launching Organizer and see if it launches fine.
    Thanks
    Andaleeb

  • Premiere elements 11 won't load

    Premiere element 11 will not load on my Windows 7 PC.  Running the adobe premier elements11.exe file has no effect at all.
    Any help would be gratefully received!

    philw_45
    Did we establish yet if this is a "it worked before but not now problem" or "it never worked" type problem?
    Given you have Premiere Elements 11 on Windows 7 (presumed 64 bit)...
    Make sure that Premiere Elements 11 is closed. Right click the Taskbar, select Task Manager/Processes, and do an End Process for any Adobe Premiere Elements process that you find opened.
    Make sure that you are working with the Folder Option Show Hidden Files, Folders, and Drives active.
    Then...
    Go to
    Local Disk C
    Program Files
    Adobe
    Premiere Elements
    11.0
    and, in the 11.0 folder, find the files named Adobe Premiere Elements 11.exe and Adobe Premiere Elements.exe. Double click the Adobe Premiere Elements.exe file and see if Premiere Elements 11 opens. If it does, create a desktop shortcut for it and open the program from it. That choice will have you bypassing the Welcome screen when you open the program.
    If the idea goes nowhere in the direction of a solution....
    Do the deletion of the BadDrivers.txt file via
    Local Disk C
    Program Data
    Adobe
    Premiere Elements
    11.0
    and in the 11.0 Folder is the BadDrivers.txt file that you delete.
    and
    Make sure that you have the latest version of QuickTime installed on your computer with Premiere Elements.
    Make sure that you are running the program as Run As Administrator or from a User Account with Administrative
    Priviledges.
    If no success, at this point, Help Menu/Deactivate within the program, close the program, do an uninstall in Control Panel area,
    use ccleaner on the system, then reinstall the program with firewalls and anti-virus disabled. Speaking of anti-virus, at the
    very beginning of all this, you might want to disable the anti-virus to determine if it or one of its updates has gotten you into
    your present situation.
    An, if all else has failed to work, there is always creating a new User Account with Administrative Priviledges and just opening the program there.
    Let us review the results from the above and then decide what next if necessary..
    Thanks.
    ATR
    Add On...My desktop and laptop both have Intel HD Graphics and present no issues on Windows 7 64 bit and Windows 8 64 bit with a variety of Premiere Elements programs.

  • ELEMENTS 12 WILL NOT LOAD

    Elements 12 will not load. I get a windows dialog box that tells me a problem caused it not to load and they are searching for a solution that never eventuates. Is it possible to delete the programme and reload from adobe or is there another solution?

    Try making a direct desktop icon for the Editor and see if you can launch the program directly from the desktop.
    Right click anywhere on the desktop and select New >> Shortcut
    Browse to Computer OS C:
    And find the PSE Editor application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
    C: >> Program Files (x86) >> Adobe >> Photoshop Elements 12
    Within the Photoshop Elements 12 folder find PhotoshopElementsEditor (the application not the Adobe shortcut)
    Select that file and click Next.
    Then click Finish.
    You should now be able to launch by right-clicking on the new desktop icon, bypassing the welcome screen. Try choosing “Run As Administrator” That often improves stability.

  • Help! Premiere Elements 7 won't load project

    Premiere elements 7  won't load my project.  Icon just spins - for about 10 minutes - then it freezes.  Figures that I am so close to finishing!!!  What are my options?  Can I copy the project and open on another computer?  Can I download a newer version of Pre and upload the unifinshed project??  Any help is greatly appreciated!!

    Welcome to the forum.
    Unfortunately, PrE does not offer that many options, if a Project goes "off."
    However, these would be my first steps, and pretty much in this order:
    Go to the PrE AutoSaves, and change the View to Details, so you can see the Dates/Times. Try Opening the very latest one. Note: if you have not changed the default, there should be five AutoSave files, and they should be located in the PrE AutoSave folder, in the Project's heirarchy. You want the latest one, not the one with the highest increment. AutoSave 03 could be newer, than AutoSave 05.
    If that does not work, then try this - Move your Assets to a new location. Then, Open your original Project. As it loads, you should be presented with "Where is file _____?" and that is what you want.Here is the tricky part. If you have many Assets, and hopefully they are in the same folder, or a few folders, and not spread around the system. I would move all Video Assets to a Video folder, all stills to a Stills folder, all Audio to an Audio folder, etc. as you want to isolate things. When presented with the "Where is file ____?" navigate to the folder with that file, and locate it. PrE will then relink to all used Assets in that folder. This is why I would segregate Assets by type, to isolate the problem, if possible. If all of your Video files load fine, you will get a "Where is file ____?" for the stills, or the music, and repeat. If the Project fails on one Asset type, then you have located the bad Asset by type, and can repeat the exercise, by segregating each file in that Asset type, to a unique folder, navigating to each folder, when prompted, until you find the bad Asset.
    In the tests above, never do a Save, but only a Save_As, so as to not overwrite the original PREL file.
    Good luck, and hope that it is a bad Asset, and nothing more.
    Hunt

  • Photo Elements 11 fails to load and rolls back when it starts 'installing shared services'

    Photoshop Elements 11 fails to load and rolls back as soon as it switches to 'installing shared services'. How can I overcome this? Premier Elements is already loaded and works fine including the Organiser. Photo Elements 10 is still on the system and also works fine.
    System - Windows 7 OS1

    Hello
    I have tried that previously, it didn’t work then and it doesn’t now.
    What I have just done is run the installation until it came up with the error message and killed the set-up file & windows installer. Photoshop elements seems to be almost installed. Organiser works for both Premier & Photoshop. What files etc would have been loaded from the point of the error message? The installation worked on a borrowed laptop (on 30 day trial). Hopefully all I need to do is copy the missing files across if you could advise what they are.
    Regards
    Bryan

  • Failure to Load Project: OA Express Datatypes not Compatible with SignalExpress 2014

    Hi,
    since a few days now, I am trying to get SignalExpress 2014 Full running on my workstation. I deinstalled and reinstalled all National Instruments components multiple times, but I always receive the following error (see also the picture attached) when I try to open a certain project:
    Failure to load project
    Installed component versions are not compatible with the version of the SignalExpress 2014. Please install the latest versions of the following:
    1) OA Express Datatypes
    Previously, there was also "DAQ Assistant" mentioned in the list of missing components/components with incompatible versions, but I could solve this with installaing NI-DAQmx. But I could not find anything looking for "OA Express Datatypes" --- I neither know in what package this component is located nor what the purpose of this component is.
    Any help is appreciated.

    Just did a downgrade and it's working again, here are my versions.
    linux 3.9.9-1
    linux-headers 3.9.9-1
    nvidia 319.32-2
    nvidia-utils 319.32-1
    bbswitch 0.7-4
    If you have conflicts, I found it easiest to remove those (bbswitch, virtualbox in my case), downgrade linux and then install the appropriate  bbs/vb packages

Maybe you are looking for