Elements 9 has stopped printing-photopaper comes out untouched. Same problem with two different pri

Photoshop Elements 9 was printing great. I hooked up new Canon Pixma 9000 printer and it worked great for about 20 prints. Spontaneously quit putting an image on the photopaper. Same problem with my Epson Artisan 810, so I assume it's an Elements 9 problem. Seems like it's not transmitting an image to the printer(s), but is sending the command to cycle the paper. I'm using a 4 year old MacBook with OS 10.6, and it worked fine for a long time. Still prints with iPhoto.
Anyone have any suggestions???
Obie

My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi

Similar Messages

Print jobs come out as blank pages with Windows 7, Bonjour & Canon iP4700

Hi there,
I have a Macbook Pro with OSX 10.6.1 and have a Canon iP4700 inkjet printer connected to this via USB and this works fine.
I've shared the printer from the Mac so that I can print to it from a Dell laptop on the same home network which is running Windows 7 RC.
I've installed the Canon print driver (I used the one for Vista as it was the closest match) on the Windows 7 laptop, then I installed Bonjour. I used the 'Add a printer' shortcut icon on the desktop and it saw the Canon printer and I added it.
I thought all was working well, except whenever I try and print to the printer form the Windows 7 laptop, it just prints a blank page instead of the text I have on the page.
Has anyone got any advice for getting this working properly?
Thanks,
Stephen

I had the same problem, however I am running XP. Also, I was using a separate program to manage my wireless connection on my PC called 'Wireless Configuration Utility'. I simply disabled this utility and used the Wireless Network Connection utility that came with Windows and the problem was solved.

HT201232 different iPhone come out from the box with a different serial number

i am from Turkey. on 8th january 2015 i have ordered 2 iPhone 6 from the apple store online. and make shipped them to my friend who was living in US. few days ago she returned to Turkey and give me the phones. but in one of the boxes the iPhone 6 was different than the one i ordered. both iPhones that i ordered were 64 GB. but i have received one 64 GB space gray and one 16 GB gold iPhone 6. now i don't understand how such a thing happens with a worldwide company like Apple. before i go and open a case in the court i want Apple to solve my problem as soon as possible and change my iPhone 6 with the one i have purchased throughout the Apple store in Turkey İstanbul. or if you would say that i have to ship it to the US than Apple must pay the shipping bill. or apple pay me back the difference between 64 gb and 16 gb which is 100 dollars. so i am waiting you to contact me as soon as possible about the solution of this stupid mistake. Aplle USA says talk to the Apple store in Turkey. Aplle store in Turkey says we cannot do anything since iphones bought from US. vb

Sorry, but you are not addressing Apple here, we are all users in these forums, just like you.
If you buy an iPhone from another country, the warranty and service can only be handled in the country where it has been bought. Since Apple does not sip internationally, you'll have to bring the iPhone back in person or send it to someone who can do that for you in the USA.
The warranty regulations are clear about that: Read Apple’s One Year Limited Warranty for iPhone

HP 932C PRINTER DOES NOT WORK OVER A NETWORK WITH TWO DIFFERENT OPERATIONAL SYSTEMS.

I have a 932c HP printer connected via USB to a Windows XP desktop computer (Dell E520), which is part of a home network.
I also have an HP Pavilion dv5 notebook, running Windows Vista Home Premium 64-bit, connected to the same network. This notebook can find the printer over the network. However, when I try to capture the 932c printer, the following dialog box appears:
"The server for the `hp deskjet 930c series` printer does not have the correct printer driver installed. If you want to search for the proper driver, click OK. Otherwise, click Cancel and contact your network administrator or original equipmente manufacturer for the correct printer driver."
When I click OK, another dialog box appears:
"The file `*.INF`on (Unknown) is needed. Type the path where the file is located, and then click OK."
However, I can't find any workable *.inf file in the HP notebook Hard drive (both partitions).
I have already tried to download the driver from the HP website, but it says that Windows Vista already has the driver for such printer! Well, now I'm stucked!
I'd like to point out that the printer works fine if I plug it directly to the HP notebook's USB port. But I want to operate the printer via the home network, keeping it hooked to the Windows XP desktop computer.
How to solve this problem? Thanks.

This is the HP notebook forums. I would recommend posting this in the printer forums for better coverage.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Prints always come out darker than in lightroom

I have a iMac, keep my screen calibrated using x-rite. I have found that all my prints come out darker than what I am seeing on screen. It almost seems like when I export a RAW file to JPG in lightroom it converts it to a denser image. As if it were taking 1/3 of the exposure out. I have done experiments with my own printer at home, as well as with two different labs here. I have downloaded the icc profiles of the different labs and have used PS4 to preview my images. There is no comparison and I can not see what step I might be missing to complete the process from image on screen to image on paper. Any help?? Thanks.

True, I have seen a difference in the density of the prints from the lab and from my home printer and it is possible that I have used the printer settings in lightroom incorrectly. It is interesting that the prints from the lab are much denser than what I see on my screen. I loose overall brightness and detail in the shadows. It seems like my colors are correct but with the loss of brightness it is hard to tell exactly. It almost seems to me as if somehow the conversion that lightroom does has something to do with how it is interpreted by the lab printer. The first test I did was to use the printer wizard (I have a cheapie epson home printer, epson stylus 405) just to see what would happen. My print came out EXACTLY as I see it on screen. That is what is my challenge. I can attach a file if it would help. THanks for all your responses.

HP Photosmart Premium - C309g and it has stopped printing in black (but will print colour)

Hi my HP Photosmart Premium - C309g and it has stopped printing in black (but will print colour). I've tried:-
printing test page - blank apart from windows logo
powering off and on
printing form different programmes.
Both black printer cartridges are full.
printer is 3 days out of one year guarantee!
I'm not very technical so easy solutions would be preferred.
Thanks
This question was solved.
View Solution.

Try the solution in this thread for cleaning the C309g printhead.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

My 6180 has stopped printing the hp diagnostic tool says connectivity is the problem how can i fix

how can i fix the c6180 that has stopped printing the hp diagnostic tool says connectivity is the problem

Hi thefishermanfl,
How is the printer connected to your computer?
The following documents and utility should help you get the printer up and working again. Let me know if you need additional assistance.
HP Print Diagnostic Utility:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&cc=us&dlc=en&lc=en&...
Installing the Printer Software on a Wireless or Wired (Ethernet) Network:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02283715&tmp_task=useCategory&cc=us&dlc=en&jump...
Installing the Product Software for a USB Cable Connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01793627&tmp_task=useCategory&cc=us&dlc=en&jump...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HT4356 When I try to print a pic from iPad to my HP air printer, it comes out all smeared and wet. What's wrong?

When I try to print a pic from iPad to HP air printer, it comes out smeared and wet. What am I doing wrong?

I can't swear to it, but it's probably a printer issue and I don't think it has anything to do with the iPad. Have you tried printing right from your computer?

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

Crop to the print size before pringing
LN

"Adobe elements has stopped working."

I've received the error "Adobe elements has stopped working" and then the program closes. It has happened numerous times and now happens more and more often. Does anyone have any fixes for this?

I've been having the same problem.
Win7 64bit 8GB RAM, 500GB free hard drive space. All Win updates in place on a regular basis (last time was 2 days ago).
I often get the "stopped working" popup message on my desktop right after I close the program (well, yeah, I would hope it would stop working when I close it) and also increasingly get it on the desktop when I open the program (before the PE12 screen opens). This latter popup "stopped working" message will persist until I close the popup window, even though the program is working just fine.
The most occurrences of actual crashes seem to be when doing a lot of titles (new or editing existing), when saving, and when exporting.
For awhile it seemed (very subjectively) that rendering the project before saving or exporting possibly helped reduce the number of occurrences, but just now the "stopped working" message popped up and the program quit while I was rendering (got about 80% through).
This time I checked the "check online for a solution" box, but to no avail--there was a brief period while Windows searched online, and then the program shut down anyway.
I've tried rebooting, making sure other programs were closed, etc. but nothing really seems to have much effect. The same project will save or export just fine on one occasion, then if I so much as change a word in a title it will become unstable. The entire project is 26 minutes long. One video track (2) with titles, one main video track (1), one audio track (mostly empty) of ambient sound with the video, one sound track.
I will try Steve's suggestion of Ctrl-Alt-Shift for awhile on opening. (This helps when PSE tools freeze up.) Thanks for the tip!

HT1349 As soon as i open itunes it comes up with the message 'itunes has stopped working'. i have uninstalled everything to do with apple/itunes and reinstalled it 5 times and it keeps happening :( . What can i do?

As soon as i open itunes it comes up with the message 'itunes has stopped working'. i have uninstalled everything to do with apple/itunes and reinstalled it 5 times and it keeps happening . What can i do? Please HELP

Hi,
i have tried all that and it still comes up with the same message or doesnt open at all . I have also i have created a new user and itunes works fine on that account.

Everytime I try to access ITunes store I get a message telling me ITunes has stopped working and crashes out on me. Any thoughts?

Everytime I try to access ITunes store I get a message telling me ITunes has stopped working and crashes out of ITunes on me. Any thoughts ?

As requested - I copied and pasted as below
cheers
Andy
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: QuickTime.qts
Fault Module Version: 7.69.80.9
Fault Module Timestamp: 4cf4536a
Exception Code: c0000005
Exception Offset: 0001ae24
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 2057
Additional Information 1: ac89
Additional Information 2: b588713172949356a1e70058af22876f
Additional Information 3: 2b4e
Additional Information 4: 48a0e3f3979eda2e360033d9ed6b251f

Printing faxes come out black

I began using the Fax utility in 10.4.3 last week. The faxes are received without problem and stored as pdf files in a folder. When I open to read they open in adobe and look fine. When I print they come out with white text on a black background. Other pdfs not created by the fax print normally. Have tried various printers with same results. Any thoughts?

I am in the same boat - using a brand new Konica Minolta C450 Biz-Hub Expensive as can be printer with built-in Fiery. Same output, a black page from PDF'ed faxes. They even look good from the print dialog box in "Preview" mode. Then it prints black, with what appears to be a row of black thumbnails of the same page across the bottom.
The same fax PDF will print on my old HP 4050N, however, without any problems. I suspect that there is an issue between the creation specs used by Apple and the requirements on the Fiery. Maybe a similar issue for you as well.
Just throwing in my two cents to see if anyone may reply to this problem.

My IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

my IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

Hi I have an HP printer. I use an APP called print central from APP Store. Used this for the last 2 years on 2 IPhones & 3 iPads with no problems. Cheers Brian

Envy 4500 has stopped printing off both a Macbook Air and a Pro - was fine before

I've been very happy with my printer/scanner but today it has stopped printing off both my Macbook Air and Macbook Pro. The printer seems fine so not sure why this has happened. Please help!

Hi @Swaggie,
Welcome to the HP Forums!
I understand that your HP Envy 4500 is not printing from your Macbook Air and your Macbook Pro. I am happy to help you with this printing issue!
For further assistance, I will need to know the following information:
The version number of the Mac Operating Systems. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies. Copy Text or Mixed Documents.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If there are any error messages on the printer's display panel.
In the meantime, please take a look through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Mac OS X, and let me know what happens!
Hope to hear from you soon!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Elements 9 has stopped printing-photopaper comes out untouched. Same problem with two different pri

Similar Messages

Maybe you are looking for