Elements 9 locks up after I delete a few photos?

Elements 9 locks up after I delete a few pictures. i have to shut down elements and restart it and sometimes i have to reboot my computer just to continue to use it. It is a real pain in the neck. I tried uninstalling and reinstalling but this didn't work and now my editor will not work it says that i have it installed on two different machines. You would think the program would be smart enough to recognize that it was reinstalled on the same machine. My computer is brand new i spent a little over $3,000 on it. I think this is a software issue. Possibly a conflict with another program but i'm not sure. I'm running windows 7 Professional,with an i7 core and 16 gigs of memory and top rated Asus video card. I've only been using Eements 9 for about half a year. i'm worried about upgrading because i don't want to pay the money to have the same problems. Can anyone help me?

When Photoshop locks up I do not get an erro message. What i mean is that i can no longer move from on photo to another photo. I can leave the screen that shows a large photo to the screen that shows thumbnails. But once i leave the large photo I can not double click on a photo to see it in a large view. If i wish to do this then i need to shut down photoshope and restart it. Also my facial recognition stopped working about the same time i started to have a problem with photo shop locking up. i haven't spoken to technical support becuase it is sunday i will try this monday when i get off of work. i hope that I will be able to find a solution to my problem.

Similar Messages

I accidently deleted a few photos, how do i retrieve?

I accidently deleted a few photos from IPHOTO, how can I retrieve them? For some reason, they never went to the TRASH folder in IPHOTO

This describes how to delete from a library. Check the Note at the bottom.
Deleting Photos from an iPhoto Library
1 - from an Event or the Photos mode: select the photo(s) and use the Delete key to move the photos to the trash bin. Then empty the iPhoto Trash bin as follows:
2 - from an album, smart album, book, slideshow, card, etc.: select the photo(s) and use the key combination of Command+Option+Delete to move the photos to the trash bin. Then empty the trash bin as above.
NOTE: deleting a photo from an album, slideshow, book, etc., with only the Delete key only deletes that photo from that item. Deleting a photo from an Event deletes ALL occurences of that photo in the library.
OT

I accidently deleted a few photos on my iPhone 5c and they are not in deleted photos folder. Is there a way to get them back?

I accadently deleted photos on my iphone 5c and they are not in my deleted photos folder. I did not back up my photos, is there anything I can do to get them back?

restore from a backup dated prior to when you synced to the new computer.
ideally... were you backing up to icloud? if so, erase all content and settings and restore from a backup in icloud dated prior to when you synced. Camera roll backs up I believe and those photos will show back up

I was working on a file with 170 photos, I needed to delete a few photos, one or two at a time, something happen and all my photo was deleted, No files in lightroom, lightroom said to inport photo, but when I went to the files in my hard drive, no files w

170 photos was delute from my harddrive. ??
Last week all my photos(3500) was increase to over 60,000 I spend all day delutes the exdtra photos . what hapen?
Mike Jones
[email protected]

The problem description in your title is incomplete.

New iPad 3 locks up after taking a photo

1 week old new 3 is locking up after trying to take a photo with standard camera icon that comes with iPad? Any tips? Have turned it off a couple of times no difference. Have about ten photos in gallery but each time we take a photo now iPad locks up and doesn't retain last picture taken. Other photo apps same thing happens.
m

Thank you both for your swift replies. Had just turned back on again and backed up. I couldn't find restore only reset. Thought I would then try camera before resetting and seemed to be operating again.
Thanks again
m

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

PO Release Strategy not changed after deletion of few line items with less

Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
Dear Friends
We have issue with PO Release strategy. We have created the PO. with release strategy with multiple approvers. After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong.
Details of the PO
PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
Are there any OSS notes available to correct his bug.
Please let me know if you need more details
Thanks in Advance
Thanks
MVS

Hi,
release indicators change it to 4.It may works. Please explore to all 6 indicators..........
i.e,
1-cannot be changed
2-changable,no new determination of strategy
3-changable,new release in case of strategy
4-changable,new release in case of strategy or value change
5-changable,new release if new strategy/outputted
6-changable,new release if new strategy or value changed/ outputted......
And check Characteristic description and value in Classification of Release strategies ........
I hope this will help you. Thanking you.
Regards,
Venkat.

When I''m playing a video clip the computer "locks-up" after a few seconds - what can I do to fix it please?

When I''m playing a video clip the computer "locks-up" after a few seconds - what can I do to fix it please?

The latest is happening with the 12 little video clips sent to me by Apple entitled "Get to know your new iPad"
They run from 3 to 32 seconds and then "lock-up" on my iMac.
I don't have photobooth on my iMac
The link to the Apple promotion is :-
http://www.apple.com/ca/ipad/guided-tours/?cid=CDM-CA-DM-P0009300-160603-EN&cp=e m-P0009300-160603&sr=em
D

HT1660 After going for a few years without using my iTunes account I bought an iPhone and am trying to access the old songs I purchased. The username and password worked, but I can't locate those songs. Have they been deleted?

After going for a few years without using my iTunes account I bought an iPhone and am trying to access the old songs I purchased. The username and password worked, but I can't locate those songs. Have they been deleted?

Hello Bennett,
The following article provides a comprehensive guide to locating and downloading your past purchases, should they be available for download.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen

System lock-ups after upgrading to Tiger

This topic was previously posted in 'Installation & Setup'.
After 3 days (and 18 views) I got no replies.
Maybe that forum was not appropriate, so I decided to try it in this forum.
About 4 months ago I exchanged my 80 GB Hd in favor of an 200 GB Maxtor 6L200P0. One day later I upgraded OS X 10.3.9 to Tiger (retail DVD).
At that time I experienced a frequent (several times a day) lock-up of my system.
No messages, nothing, not even after powering down and restarting.
After some time I figured out that the lock-ups occurred on Internet access. Clicking on a link in Safari, posting messages on Discussions. Even Mail locked the system a few times. Also Corripio (artwork and lyrics finder for iTunes) caused the system to lock.
After that, I decided to perform an Archive & Install (first time after almost 4 years of using this Mac). Except from having to re-install a number of 3rd party apps. the system seemed to perform well. No lock-ups were experienced for a few weeks.
Problem solved, I thought.
Although far less frequent than before, I do experience those annoying lock-ups a few times a week.
Here are my questions:
What could be the cause of the lock-up?
Is is advisable to perform a Clean Install? What advantage do I have of, it opposite to performing an A&I. I'm reluctant to perform a clean install at the moment, because I haven't found a few serials of commercial and shareware applications yet ( I know, I should have written them down :-/ )
Any hints/tips to track down the exact cause?
TIA
M
P.S. ( I do have a bootable complete backup of my HD on an Maxtor Onetouch II )

Hi, M.
1. You wrote: "What could be the cause of the lock-up?"The number of potential causes range from disk corruption or bad applications to serious hardware problems, such as a defective logic board.
2. You wrote: "Any hints/tips to track down the exact cause?"I suggest treating the "lock up" problem — better described as a "freezes and hangs" problem — similar to a kernel panic as the basic troubleshooting and hardware testing steps are virtually the same. See my "Resolving Kernel Panics" FAQ.
It provides a comprehensive roadmap which you should follow from beginning to end, in the order specified in the FAQ.
2. You wrote: "Is is advisable to perform a Clean Install? What advantage do I have of, it opposite to performing an A&I."The term "Clean Install" does not apply in Mac OS X. That is obsolete Mac OS 9 terminology. The closest Mac OS X equivalent to a "Clean Install" is an Archive and Install with the Preserve User and Network Settings option, which it sounds like you've already tried once previously, but you may want to try again as part of the troubleshooting process I outlined above. See my "General advice on performing an Archive and Install" FAQ for some important tips on this process.
The other options are:
• Archive and Install without the Preserve User and Network Settings option: This reinstalls the OS and wipes out both your accounts and your network configuration, but preserves the previous System folder.
• Erase and Install: Erases the hard drive, i.e. Macintosh HD, and reinstalls the OS from scratch, preserving nothing: your accounts, network settings, and everything else on the drive are deleted.
Of those two, and since you have a bootable backup, the second (Erase and Install) would be the second-to-last thing you would try, the last being taking the machine in for service.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

HT4913 iTunes locks up after I add the computer to Match

iTunes locks up after I add the computer to Match. I have to End the Process from the Task Manager. When I reopen, it says Match encountered an error and I should Sign out and sign back in again. I have done this numerous times and no luck. I have run a repair from the Programs screen. I have uninstalled and reinstalled iTunes. This is a new computer runing Windows 7.

I had the EXACT same problem. My 60GB video iPOD was stolen, so I went and bought a new 80GB. I plugged it in, and BAM, iTunes is frozen!
I fixed it. I'm not going to say that this is the best way to do it, but it worked, so, use this solution at your own risk, I hope it helps some people out.
1. I did a file search of my entire computer for "itunes" and it came up with 292 results! Everytime I had downloaded it, copied it, transferred info from 1 computer to another, another copy was made. I don't know for sure, but I believe there was a conflict between 1 or more copies of iTunes, and it didn't know which program file to use, so it just locked up.
2. I copied all of the music that was in my "iTunes music folder" in My Music for a back up and named it something that didn't contain "iTunes", since anything you downloaded from the iTunes store can only be downloaded once.
3. I followed the file path for EVERY file that had anything to do with iTunes, and manually put it in the recycle bin- I mean program files, short cuts, everything. The exception is (& I stress this) the copy of your iTunes folder you just made has your podcasts, etc which will show up in your search. Make sure you recognize this and DO NOT delete those files. I also deleted anything that had to do with the previous iPOD. There are a few of them. That resolved any conflict I had with the previous one.
4. I then emptied the recycle bin & restarted the computer.
5. Go to Apple.com and download the new iTunes.
When I opened it up, it showed NO music, as it should. I went to "Import folder", found the folder that I copied from the iTunes music folder and clicked ok. 3 1/2 hrs later, I was transferring 8889 songs, videos, podcasts & movies to my new iPOD.
Think about each step as you do it, so you don't jack it up but it worked for me. Hope it does for you too.

HELP! Photos locked and can't delete in Windows 7/PSE8

Hello,
Appreciate any and all help! Not a computer gal.....
Have a 3 day old Dell Studio XPS 8100 with Windows 7.
Using an external drive transferred from my former Dell.
Loaded new Photoshop Elements 8.
Can access and edit my photos just fine...
but when I go to delete a photo and/or override a photo with an edited version, I get an error message that
MY FILE IS LOCKED.
HELP???
Deal with thousands of photos a month--don't have time for another step--just need to delete or save and delete former version.
Talked with Dell and Microsoft but they claim I need to "buy software support."?!?!?!?!?
The Microsoft guy seemed to imply that there is some fix --and the Dell guy thought there was some security thing in WIndows 7 preventing the deletion.
Please...any ideas!!! Spent HOURS on this already!
Thanks,
Krista in Chicago

I had the same problem. I am not exactly sure which changes that I did were the actual ones that solved the problem but here is what I did. I went to the highest folder (in my case the whole drive) in Windows Explorer (The Folder icon) and right clicked on the drive to get the Properties dialog box. I then selected Security. I highlighted Everyone and clicked on Edit and then gave Everyone permissions for everything (probably laying my drive wide openfor any viruses floating around). I also found that all of the files and folders were marked Read Only so I removed that from all files and folderss. That seems to have solved the problem. This solves the immediate problem. I am not sure if this is what is recommended for security purposes.

DB insert after DB delete in a single program on the same table

Hi All,
A program is first deleting some records from a databse table ( assume Table1)
and it is trying to insert the same records back to the table Table1 with the same
primary keys.
This program is defective. It does not check against the table
Table1 to verify that the commit work is completed after the delete,
As a result sometimes when the database performance is slow or the
record is locked by some other user, is it is trying to insert records
into the table with the same primary keys even before the delete work
is committed to the database. The program is unable to insert records
into the table with the same primary keys and hence terminating it and
creating the Short Dump Message.
The delete is committed to the database even after the program is
terminated with a Short Dump Message. This results in the old records
being deleted without the new updated records being inserted into the
table Table1.
Please suggest a solution this problem.

Hi,
You need to create a ENQUEUE Function module for this one, nad before doing the Deletion Lock the table/entries using the above function module and do the deletion and insert the records then write the fucntion moduel DEQUEUE to release the lock
secondly, before inserting the records, why don't you check whehter the record is already there in the table with the same primary keu, if the record is existed with the same primay key then do not insert that record.
Regards
Sudheer

Photoshop elements 11 just after installation in the editor the mouse does not even scroll top menu

HI guys
Very dissapointed so far by this adobe soft, that I just installed a few hours ago. At this point it is worthless and no way I can use it like that . After installation I went directly into the editor and right away I saw that the software was very sluggish with my cursor dragging . After clicking on a top menu (File) the menu bar open (5 sec.)and if I scroll it down I do not see the blue color following my cursor, and if I click at the location in the bar of my cursor it takes a few second before it respond. I am also using the following adobe softwares that works flawlessly : Photoshop CS5.5 extended; Bridge; Camera Raw; Lightroom 4.2. My computer uses an Asus P7P55-E Premium motehrboard with Win 7 pro 64 bits with an intel I 860 2.8 mhz and 8 gigs of RAM. All my adobe softs are 64 bits, except for elements 11. After seeing that, I installed the upgrades without any visible problems. Even after that nothing has improved.
I have to say that I have quite a few softwares installed that all work perfectly such has Topaz bundle; Photomatix pro, etc. In fact of all my softwares this is the only one that is giving me troubles.
I hope somebody has a solution for this extremely poor behavior.
Thanks
Luc

I think you are using Win7, if yes please try the following
Right click on the PSE icon and select Run as administrator
Now try to use it, check if there is any change or not.
Harshit

How do I restore column headings in Response table after accidently deleting them? Undo doesn't work.

How do I restore column headings in Response table after accidently deleting them? Undo doesn't work (only seems to go back one level). I also have so many headings I won't be able to type them in manually!

With the help of information from user, ptressel, in [https://support.mozilla.org/en-US/questions/1032154#answer-673322 a post here about the existence of sessionstore.js when version 33 was released], I was able to easily recover my tabs and tab groups as follows:
# close Firefox and, perhaps, allow a few seconds (30s?) for any final closing of files;
# check to see if you have a sessionstore.js file in your profile folder, named like the one I documented in my original post above;
# if it is not timestamped prior to the discovery of your problem, open the sessionstore-backups folder;
# check if the recovery.js file is suitably timestamped and, if not, the recovery.bak.
# At this point, you are likely to find that none of them are prior to your problem occuring. If so, open your backups of this folder and go through steps 2-4 to find a file prior to your problem occuring.
# When you find a file, copy it to the root of your current profile folder and name it, "sessionstore.js"
# Open Firefox. Mine opened up as desired.
This is a Windows solution. Sorry I can't comment on other platforms, but I'd bet that as this is just a file copy and renaming, it is likely the same.
For Windows users, you may find you need to sign out and login as an administrator in order to access the backups. You need not logoff your standard account, but do have Firefox closed as described above.
Hope that helps.

Elements 9 locks up after I delete a few photos?

Similar Messages

Maybe you are looking for